Useful for releasing the management interface if the user wants to
connect to it by other means.
Detached connections are set to state = detached (no disconnected)
and auto_connect disabled, so that they could be handled properly
during a re-attach.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Three options are provided to control scanning of persistent
(pre-satrted) connections in config-auto folder, and how they
are attached to.
Auto: Scan and list persistent connections and attach to their
management i/f automatically at startup, and periodically
retry on failure to attach.
Manual: Scan and list as above, but do not attach automatically.
User can attach to such connections by manually clicking
connect.
Never: Do not scan config-auto folder.
Default is "Auto"
Change of this setting in the settings menu will take full effect
only if none of the connections are in connecting/connected/detached
state so that the connection list can be updated. Otherwise
restart the GUI.
TODO: Copying the settings dialog changes to all languages
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Persistent connections have openvpn.exe daemon started
external to the GUI (e.g., by the automatic service).
This patch adds support for attaching to the management
i/f of such daemons from the GUI and control the connection.
The GUI never stops or starts the openvpn.exe process in this
case. Instead, connect and disconnect buttons signal the
management interface of a running openvpn.exe process to start
the tunnel by attaching to mgmt i/f and sending hold-release if
needed or stop it and wait in management-hold state
(see DisconnectDaemon()).
When the GUI process exits, persistent connections are left in their
current state using DetachOpenVPN().
No connections are marked as persistent as yet. That is done
in a following commit.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Add support for selecting pkcs11-id from the GUI.
Requires --management-pkcs11-id in the config file.
This option is not added by the GUI.
A list of all available pkcs11 certificates are presented to the
user with buttons OK, Cancel, Retry. OK submits the selected
entry, Cancel closes the connection, Retry reconstructs the
list of certificates by querying the daemon again. The latter
can be used to retry after inserting a token.
If no certificates are found, a message suggesting to insert
a token and press 'Retry' is displayed.
The list shows the "Issued-to", "Issued-by" names
(usually the subject & issuer common names) and valid-until
date in current locale for each certificate.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
This adds optional support for using OpenVPN3 client
as an alternative to openvpn2.
Just replacing one client with another will not work:
- OpenVPN3 doesn't use interactive service, it uses
"agent" service with completely different protocol. OpenVPN GUI
needs to talk to agent using HTTP and JSON.
- OpenVPN3 management interface realtime notifications must be
explicitly turned on in order for GUI to work.
To enable using openvpn3:
- use any of *-ovpn3 presets (cmake build system)
- ./configure --enable-ovpn3 (mingw)
To switch betweet openvpn2 and openvpn3, see "OpenVPN Engine"
radiobutton group in Settings -> Advanced dialog.
OnReady() implementation was slighly changed - "log all on"
replaced with "log on all" - according to management interface
documentation this is the right way to do it, and also OpenVPN3
only supports "on all" order.
Management interface - enabled OpenVPN3 client (omiclient.exe) and
agent (ovpnagent.exe) are now part of openvpn3 repo.
Co-authored-by: Christopher Ng <facboy@gmail.com>
Signed-off-by: Christopher Ng <facboy@gmail.com>
Signed-off-by: Lev Stipakov <lev@openvpn.net>
The user is prompted with a message showing the config
name that will be imported. The user can accept or cancel
the operation.
If the user was already prompted for over-write permission
because a config with the same name exists, no further dialog
is shown.
Import using the menu (Import File...) is not affected.
Rationale:
We want to set "Import" as the default verb for the context
menu of .ovpn files. This will allow import of configs by
double-click. Also when .ovpn file is downloaded using a browser,
setting the default bowser action to "open" will result in an import.
In such cases a silent import action could be surprising, and a
prompt showing what is being imported could provide a better UX.
On the flip-side, the prompt/dialog will also be shown when import
is done from the context menu of .ovpn by "right click and
choose import" or when "openvpn-gui.exe --import foo"
or "openvpn-gui.exe --command import foo" is executed. As import
is an action that does not result in an immediately visible result
(unlike, say, edit or print), a prompt requiring user action is of
some value even in these cases. At worst it's a minor annoyance.
See also: https://github.com/OpenVPN/openvpn-build/pull/227
and discussions there-in
Signed-off-by: Selva Nair <selva.nair@gmail.com>
ParseUrl extended to parse generic URLs and parse
the path. DownloadProfile() function re-factored
for reuse with generic URL.
Also:
- INTERNET_FLAG_RELOAD added to the request
call to force reloading the data from server instead
of using possibly cached data.
- Input box for URL extended in length to about
50 characters wide.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Import a config file from command line as
`openvpn-gui.exe --command import <file-path>`
The command is send to a running instance if any.
Otherwise the GUI extecutable is started and
the import processed.
`openvpn-gui --import <file-path>`
is interpreted as the same command.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Use WinInet to download profile into memory buffer.
If there are certain certificate errors (invalid CN,
wrong date, unknown CA, revocation check failed),
ask if user wants to continue.
Extract profile name from content, sanitize name and
save profile in temp directory. Then import profile
using existing facilities.
Signed-off-by: Lev Stipakov <lev@openvpn.net>
This is the first patch from series which implemets
importing profile from URL, currently implemented
by OpenVPN Access Server.
Move "Import from file" menu item under new "Import"
item. Add "Import from AS..." item under "Import", which
opens new profile import dialog.
Signed-off-by: Lev Stipakov <lev@openvpn.net>
- Also add an edit box for setting the mute interval for
repeated echo messages. To be specified in hours
>=0. A zero value disables muting.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- Add an option in the advanced settings menu for
the management port offset. Allows any value in the
range 1 to 61000 which with upto ~4000 added as connection
id keeps it in range.
Default is the currently hard coded value of 25340.
As Windows has no concept of privileged ports and the ephemeral
range used varies from version to version, no attempt is made to
avoid conflicts with ports in use.
- Add an option to choose the config menu view from the
advanced settings with three options:
Auto: Automatically switch to the nested view when
number of configs exceed a limit (currently 25)
Flat: Force the flat view irrespective of the number of
configs
Nested: Force the nested view irrespective of the number
of configs
Issues: 370 and 387
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- Add a message box that support appending messages with
a title formatted at a larger font and a text
displayed in the default font.
- A global instance of the message box is used to
display messages from all profiles.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
We didn't use interactive service when gui was running
under admin because of some privilege escalation vulnerability in Vista.
Apparently this issue doesn't exist on Win7 and newer versions so
it is safe to use iservice on those systems.
Introduce "Always use interactive service" option,
which is "on" by default. This should enable users,
who by various reasons run gui as admin, use Wintun.
When gui is running as admin and interactive service
cannot be started or not installed, warn that wintun will not work.
Signed-off-by: Lev Stipakov <lev@openvpn.net>
- Prompt the user for permission if import may overwrite
an existing config.
- Also raise an error if the import file source matches the
global or local config directory. Reimporting a config on to
itself is not supported. This also avoids ERROR_SHARING_VIOLATION
in CopyFile() when source and destination are the same.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- This checkbox is inactive and does nothing.
The service-only usage can be still activated using the command
line option --service_only or by editing the registry, but its
not a recommended use case for GUI version 11.0 and above.
See also issue: #264
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- Show the assigned IP numbers, traffic stats (bytes in/out), and
the GUI and OpenVPN core versions on the status window.
Note: IDS_TXT_BYTECOUNT = "Bytes in: %s out %s" needs translation.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- New option --command <action> <params> to send commands to
a running instance of openvpn-gui.exe
Supported actions are
connect, disconnect, reconnect
each of which takes the name of the config (with or without the
extension .ovpn) as a parameter;
disconnect_all, exit
which take no parameter and
silent_connection
which takes an optional parameter = 0 or 1 (1 is the default)
Examples: with the gui running, start a new instance as
openvpn-gui.exe --command disconnect myvpn : ask running instance
to disconnect myvpn if connected
openvpn-gui.exe --command status myvpn : ask running instance
to show the status window for myvpn if available
openvpn-gui.exe --command disconnect_all : ask running instance
to disconnect all active connections
- The second instance exits after issuing a SendMessage to the
already running instance. If no action is specified, the running
instance is notified to show a balloon to alert the user
- These messages may also be sent from scripts as COPYDATA messages
with the wData element specifying the action to execute and lpData
a pointer to the parameter. The dwData param must be one of
WM_OVPN_xxx with xxx = START, STOP, RESTART, STOPALL, EXIT or
SILENT. See main.h for their values.
v2: Bug fixes based on test reports from larson0815
here: https://github.com/selvanair/openvpn-gui/issues/5
and cron410 here: https://github.com/OpenVPN/openvpn-gui/issues/104
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- This works the same way as restart button in the status window
but is more conveniently accessible from the tray menu.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- Effective only when username and password are saved.
- The user may interrupt auto submission and edit the username/password.
- If silent_connection is on the dialog is bypassed without any delay.
v2 changes:
- Display message in normal text color and show remaining time
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- Flag password and username input if these contain an invalid character
(currently only embedded '\n' is disallowed). Shows a popup when OK
is pressed so that the user can correct the input and resubmit.
- Add an error message to the log when the management i/f returns
ERROR for incorrectly parsed commands. Otherwise such errors go
unnoticed.
Note: IDS_ERR_INVALID_USERNAME/PASSWORD need translations.
Reported and tested by: Florian Beier (H4ndl3 on github)
Fixes Trac: #958
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- "Wrong username or password" message shown in the auth userpass dialog after
an auth failure
- "Wrong password" message shown in the private key password dialog after a
password failure.
These message texts are colored red by default (TODO: make the color customizable)
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Note: IDS_NFO_TOKEN_PASSWORD_CAPTION and IDS_NFO_TOKEN_PASSWORD_REQUEST
strings need translation.
TODO: support for selecting pkcs11-id from the GUI
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- Add a base64 decode function using Windows CyptoAPI
- Move multibyte to widechar conversions to a function
- Add config name to caption of password dialogs to help user
identify the request
- Add new dialog template for generic password/PIN requests
and use it to handle dynamic challenge
Note 1: if dynamic challenge response verification fails, an auth-failed
message is returned by the server causing the GUI to clear any saved
password even if the user-auth dialog itself succeeeded.
Note 2: Dialog template ID_DLG_CHALLENGE_RESPONSE added to language
files may require translation.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Sometimes gracefully stopping openvpn fails leaving the
process running in background. This causes restarting of
connections to fail until those processes are manually killed.
- Read process ID from interactive service to get process
handle when openvpn is started by the service.
- Add a last resort method to forcefully terminate openvpn
process that fails to exit aftier sending stop signal. Terminate
is triggered after a 3 second timeout following Stop.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Option ediitng dialogs are in two tabs: General and Advanced.
Proxy related options are left in the proxy tab. Options
config_dir, config_ext, log_dir, script timeouts and
service-only flag are in the Advanced tab. All other more commonly
used flags and options are in the General tab.
- As options are editable, save values in registry only when they differ
from the default values. This leaves the registry clean and makes changing
options and their defaults during updates easier.
- Entries for config_dir and log_dir must be absolute paths.
Environemental variables such as %PROFILEDIR% may be used
to construct these.
- Empty config_dir, config_ext and log_dir entries are silently
ignored (i.e., the current values are left unchanged).
- Store all numeric and boolean parameters in registry as DWORD instead of
strings.
- On startup, the default parameters are loaded, then the registry is read
and finally command-line parameters parsedi.
- Out of range script timeout values in registry truncated with a
warning instead of fatal error. This allows the user to access the
settings dialog and make corrections.
- Save proxy and language settings under the same
HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings.
- Save the current version of the GUI in regsitry so that updates
can be detected and any needed registry cleanup done.
- If no version info is present in the registry any values in OpenVPN-GUI
key in HKCU are deleted for a clean start as this is the first version
to save registry values in HKCU. Language and proxy data if present
under Nilings is migrated.
Note: new controls in the General tab and newly added Advanced tab dialog
are copied to all language files from the English version. These need to
be translated.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- Username and, optionally, password as well as the private
key passphrase are saved in config-specific registry keys
- All saved data are kept encrypted using DPAPI
- The passphrase dialog is skipped if a valid saved private
key password is available. However, the user-auth dialog
is always presented, prefilled with the saved username
and password.
Note: A text string "Save password" is added to three dialogs
in all language resource files. Additional text with ids
IDS_MENU_CLEARPASS and IDS_NFO_DELETE_PASS are added to the
STRINGTABLE only in the English language resource file.
All these need translations.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
When a connection is attempted using a config in a location
that would fail, offer an option to add the user to the "OpenVPN
Administrators" group. This is done using shell-execute which will
show a UAC prompt for elevation. If it fails (due to user chooses
NO or the UAC dialog fails) the connection is not started.
v2 Changes
- Rebase to master
- Automaticlaly add the admin group if it doesn't exist
- Allow unicode strings in debug output
- Use domain\username to identify user
- Fix the PrintDebug macro
Minor changes based on user feedback
- Bring the window back to foreground after UAC prompt completion
- Show a message if another connection is tried during authorization
- Do not add user to ovpn_admin_group if it is same as the built-in admin group
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- Handle early errors (openvpn exits before management connection is up)
with a helpful error message that points the user to view log.
- Include only readable config files in the connection list
- Warn if no connection profiles found
TODO: handle startup errors from interactive service
Change the default log file location to OpenVPN/log in user's profile directory
to support running without admin privileges using the interactive service.
The registry keys are moved to HKCU from HKLM to allow for user-specific
settings as well as to avoid the need for running the GUI as admin at the
first instance.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Selva Nair