Don't send "Accept: default, gzip" by default. This is because
some server responds with "Content-Encoding: gzip" for files which
itself is gzipped file and aria2 inflates them. This is a problem
if user don't want to inflate the file. Apparently this is server
configuration error, but I cannot do anything about this. So turn
this off. Added --http-accept-gzip option. If true is given to
this option, aria2 sends 'Accept: deflate, gzip' request header
and inflates response if remote server responds with
'Content-Encoding: gzip' or 'Content-Encoding: deflate'. This
indicates we removed extension tgz hack in order not to inflate
files with tgz extensions.
* doc/aria2c.1.txt
* src/HttpRequest.cc
* src/HttpRequest.h
* src/HttpRequestCommand.cc
* src/HttpResponseCommand.cc
* src/OptionHandlerFactory.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/HttpRequestTest.cc
Added --always-resume and --max-resume-failure-tries option. If
--always-resume=false is given, when all given URIs does not
support resume or aria2 encounters N URIs which does not support
resume
(N is the value specified using --max-resume-failure-tries
option), aria2 download file from scratch. The default behavior
is --always-resume=true, which means if all URIs do not support
resume, download fails. I think this is OK because user normally
don't like to see that partially downloaded file is
overwritten(this is particularly true if file size is big). This
option is useful when aria2 is used as download backend and
graceful falling back to overwritten behavior is preferable.
Added exit status value 8, which means download failed because
server did not support resume.
* src/AbstractCommand.cc
* src/DefaultPieceStorage.cc
* src/DownloadCommand.cc
* src/DownloadResultCode.h
* src/FileEntry.h
* src/FtpNegotiationCommand.cc
* src/HttpResponse.cc
* src/HttpResponseCommand.cc
* src/OptionHandlerFactory.cc
* src/RequestGroup.cc
* src/RequestGroup.h
* src/SegmentMan.cc
* src/SegmentMan.h
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/DefaultPieceStorageTest.cc
* test/SegmentManTest.cc
Added --remove-control-file option. This option removes control
file(*.aria2 file) before download. Using with
--allow-overwrite=true, download always starts from scratch. This
will be useful for users behind proxy server which disables
resume. For such proxy user, -C1 is also recommended for Metalink
downloads to avoid establishing unnecessary connections.
* doc/aria2c.1.txt
* src/OptionHandlerFactory.cc
* src/RequestGroup.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Accept IPv4 network address with CIDR block in --no-proxy option
and no_proxy environment variable. Current implementation does
not resolve hostname in URI to compare network address. So it is
only effecive if URI has numeric IP addresses.
* doc/aria2c.1.txt
* src/AbstractCommand.cc
* src/OptionHandlerFactory.cc
* src/bitfield.h
* src/usage_text.h
* src/util.cc
* src/util.h
* test/UtilTest.cc
* test/bitfieldTest.cc
Added --bt-lpd-interface option to specify the interface to use
for Local Peer Discovery. LpdMessageDispatcher object now has its
own socket. LpdMessageReceiver's socket is binded to multicast
address to only receive multicast packets.
* src/BtSetup.cc
* src/LpdMessageDispatcher.cc
* src/LpdMessageDispatcher.h
* src/LpdMessageReceiver.cc
* src/LpdMessageReceiver.h
* src/LpdReceiveMessageCommand.cc
* src/LpdReceiveMessageCommand.h
* src/OptionHandlerFactory.cc
* src/SocketCore.cc
* src/SocketCore.h
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/LpdMessageDispatcherTest.cc
* test/LpdMessageReceiverTest.cc
Added --human-readable option. This option, when true is given,
prints sizes and speed in human readable format(e.g., 1.2Ki,
3.4Mi) in the console readout. The default value is true and it
looks exactly the same as aria2-1.8.0. So the 'new feature'
appears when false is given. In this case, sizes and speed are
printed without in bytes. No Ki, Mi units conversion is used.
This may be useful for a program to parse the output of aria2.
* doc/aria2c.1.txt
* src/ConsoleStatCalc.cc
* src/ConsoleStatCalc.h
* src/OptionHandlerFactory.cc
* src/main.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added --bt-metadata-only option. If true is given to this option,
aria2 downloads metadata only. The file(s) described in metadata
will not be downloaded. This option has effect only when
BitTorrent Magnet URI is used. See also --bt-save-metadata option.
* doc/aria2c.1.txt
* src/OptionHandlerFactory.cc
* src/UTMetadataPostDownloadHandler.cc
* src/download_helper.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added --http-no-cache option. When true is given, aria2 sends
Cache-Control: no-cache and Pragma: no-cache header to avoid
cached content. If false is given , these headers are not sent
and you can add Cache-Control header with a directive you like
using --header option.
* src/HttpRequest.cc
* src/HttpRequest.h
* src/HttpRequestCommand.cc
* src/OptionHandlerFactory.cc
* src/download_helper.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added --bt-save-metadata option. When true is given, it saves
metadata as .torrent file. This option has effect only when
BitTorrent Magnet URI is used. The filename is name in metadata
with suffix .torrent. The directory to be saved is the same
directory where download file is saved. If the same file already
exists, metdata is not saved.
* src/OptionHandlerFactory.cc
* src/UTMetadataPostDownloadHandler.cc
* src/UTMetadataPostDownloadHandler.h
* src/message.h
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/UTMetadataDataExtensionMessageTest.cc
If '-' is given as an argument to --metalink-file option, aria2
reads Metalink file from stdin.
* src/OptionHandlerFactory.cc
* src/OptionHandlerImpl.h
* src/a2io.h
Added option --bt-prioritize-piece. This option instruct aria2 to
try to download first and last pieces of each file first. The
argument can contain 2 keywords:head and tail. To include both
keywords, they must be separated by comma. These keywords can take
one parameter, SIZE. For example , if head=SIZE is specified,
pieces in the range of first SIZE bytes of each file get higher
priority. tail=SIZE means the range of last SIZE bytes of each
file. SIZE can include K or M(1K = 1024, 1M = 1024K).
* src/DefaultPieceStorage.h
* src/Makefile.am
* src/OptionHandlerFactory.cc
* src/OptionHandlerImpl.h
* src/PriorityPieceSelector.cc
* src/PriorityPieceSelector.h
* src/RequestGroup.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* src/util.cc
* src/util.h
* test/Makefile.am
* test/MockPieceSelector.h
* test/PriorityPieceSelectorTest.cc
* test/UtilTest.cc
Included version number in Peer ID and client version. Peer ID
now starts with "aria2/VERSION-", where VERSION is
MAJOR.MINOR.MICRO. Client version is aria2/VERSION.
* src/DefaultBtInteractive.cc
* src/OptionHandlerFactory.cc
* src/bittorrent_helper.cc
* src/bittorrent_helper.h
* src/main.cc
* src/usage_text.h
* test/BittorrentHelperTest.cc
Added help categories: #cookie and #hook. Added #https tag to
--https-proxy and --https-proxy, --all-proxy and --no-proxy.
* src/OptionHandlerFactory.cc
* src/help_tags
Help category now starts with "#" to distinguish a category from
keyword search. For example, "http" categroy is now "#http". You
can type "--help=#http" to get explanation of options related to
http. If '#' is omitted, then the argument is treated as a keyword
and aria2 searches options whose name includes the keyword and
print matched ones. For example, "--help=http" will show options
whose name includes "http".
* src/OptionHandlerFactory.cc
* src/help_tags.h
* src/usage_text.h
* src/version_usage.cc
Added --xml-rpc-listen-all option. If true is given to this
option, aria2 listens incoming XML-RPC requests on all network
interfaces. If false is given, listens only on local loopback
interface. The default value is false.
* src/HttpListenCommand.cc
* src/OptionHandlerFactory.cc
* src/SocketCore.cc
* src/SocketCore.h
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added --bt-stop-timeout=SEC option. This function stops BitTorrent
download if the download speed is 0 and the number of seeder is 0
in consecutive SEC seconds. By default, this function is disabled.
* src/BtSetup.cc
* src/Makefile.am
* src/OptionHandlerFactory.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
The default value of --dir option is the absolute path to the
current directory. If getcwd() is failed, then it is ".", which is
the same value with old implementation. This change is necessary
because after daemon() call, the current working directory is
changed to /.
* src/File.cc
* src/File.h
* src/OptionHandlerFactory.cc
* src/option_processing.cc
Added the ability to execute command when download starts and
stops. You can also specify command for particular cases such as
complete/error download. Added --on-download-start,
--on-download-stop, --on-download-complete and --on-download-error
option.
* src/OptionHandlerFactory.cc
* src/RequestGroupMan.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added 'falloc' parameter for --file-allocation option. 'falloc'
allocation mode uses posix_fallocate() system call to allocate
file on disk. If you are using newer file systems such as ext4
(with extents support), btrfs or xfs, 'falloc' is your best
choice. It allocates large(few GiB) files almost instantly.
Don't use 'falloc' with legacy file systems such as ext3 because
it takes almost same time as 'prealloc' and it blocks aria2
entirely until allocation finishes. 'falloc' may not be
available if your system doesn't have posix_fallocate() system
call.
* configure.ac
* src/AbstractDiskWriter.cc
* src/AbstractDiskWriter.h
* src/AbstractSingleDiskAdaptor.cc
* src/BinaryStream.h
* src/BtCheckIntegrityEntry.cc
* src/ByteArrayDiskWriter.h
* src/CheckIntegrityEntry.cc
* src/CheckIntegrityEntry.h
* src/DefaultPieceStorage.cc
* src/DiskAdaptor.cc
* src/DiskAdaptor.h
* src/DiskWriter.h
* src/FallocFileAllocationIterator.cc
* src/FallocFileAllocationIterator.h
* src/FileAllocationEntry.cc
* src/FileAllocationEntry.h
* src/Makefile.am
* src/MultiFileAllocationIterator.cc
* src/MultiFileAllocationIterator.h
* src/OptionHandlerFactory.cc
* src/RequestGroup.cc
* src/StreamCheckIntegrityEntry.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/FallocFileAllocationIteratorTest.cc
* test/Makefile.am
Added an option to specify the interval between tracker
requests.
If non-zero value is specified, aria2 uses it and ignores the
interval value in the response of tracker. If zero is specified,
aria2 determines the inteval value based on the tarcker response
and download progress.
* src/DefaultBtAnnounce.cc
* src/DefaultBtAnnounce.h
* src/OptionHandlerFactory.cc
* src/RequestGroup.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added --dry-run option. In this mode, aria2 just checks whether
the remote file is available and doesn't download data. This
option has effect on HTTP/FTP downloads and BitTorrent downloads
are canceled in this mode.
* src/FtpNegotiationCommand.cc
* src/HttpResponseCommand.cc
* src/HttpResponseCommand.h
* src/OptionHandlerFactory.cc
* src/RequestGroup.cc
* src/RequestGroupMan.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Don't reset URI in retry to avoid additional round trips because
of redirects.
* src/AbstractCommand.cc
* src/OptionHandlerFactory.cc
* src/prefs.cc
* src/prefs.h
Added --index-out option to specify each file path for torrent.
Here index shown in --show-files option is used to specify which
file path should be altered. For example, to change the file
path with index=2, use --index-out=2=aria2.tar.bz2. You can use
this option multiple times: --index-out=1=aria2.tar.bz2
--index-out=2=aria2-opt.tar.bz2. The short hand form -O is also
available. This option can be specified in -i list.
* src/DefaultBtContext.cc
* src/DefaultBtContext.h
* src/MultiDiskAdaptor.cc
* src/MultiDiskAdaptor.h
* src/MultiFileAllocationIterator.cc
* src/OptionHandlerFactory.cc
* src/OptionHandlerImpl.h
* src/Util.cc
* src/Util.h
* src/download_helper.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/DefaultBtContextTest.cc
* test/MultiDiskAdaptorTest.cc
* test/MultiFileAllocationIteratorTest.cc
* test/UtilTest.cc
Added --max-overall-download-limit option. Now
--max-upload-limit option is not ignored when
--max-overall-upload-limit option has non-zero value. aria2
checks download(upload) speed in the order:
first checks overall speed limit and if it is not exceeded, then
checks speed limit per download. Thus you can specify both
value. For example, set --max-overall-download-limit=1M and
--max-download-limit=500K to prevent from one download from
eating all overall speed limit.
* src/DefaultBtInteractive.cc
* src/DefaultBtInteractive.h
* src/DefaultBtMessageDispatcher.cc
* src/DefaultBtMessageDispatcher.h
* src/DownloadCommand.cc
* src/DownloadCommand.h
* src/FtpNegotiationCommand.cc
* src/HttpResponseCommand.cc
* src/OptionHandlerFactory.cc
* src/PeerInteractionCommand.cc
* src/RequestGroup.cc
* src/RequestGroup.h
* src/RequestGroupMan.cc
* src/RequestGroupMan.h
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/DefaultBtMessageDispatcherTest.cc
Added --http-auth-challenge option. If it is set to true(by
default), aria2 sends HTTP authorization header only when it is
requested by the server. If false is set, then authorization
header is always sent to the server. This is useful for servers
that don't respond 401 code when authentication is required.
There is an exception: if username and password are embedded in
URI, authorization header is always sent to the server
regardless of this option.
* src/AuthConfigFactory.cc
* src/HttpSkipResponseCommand.cc
* src/OptionHandlerFactory.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/AuthConfigFactoryTest.cc
* test/HttpRequestTest.cc
Changed the default value of --proxy-method option from 'tunnel'
to 'get'. Use 'tunnel' for HTTPS regardless of --proxy-method
option.
* src/AbstractCommand.cc
* src/AbstractCommand.h
* src/FtpInitiateConnectionCommand.cc
* src/HttpDownloadCommand.cc
* src/HttpInitiateConnectionCommand.cc
* src/HttpInitiateConnectionCommand.h
* src/OptionHandlerFactory.cc
Added OptionParser::parseArg() which internally uses getopt_long
to parse command-line options. All command-line options are now
configured by OptionHandler. No manual editing of struct option*
is required any more.
* src/NameMatchOptionHandler.h
* src/OptionHandler.h
* src/OptionHandlerFactory.cc
* src/OptionHandlerImpl.h
* src/OptionParser.cc
* src/OptionParser.h
* src/array_fun.h
* src/main.cc
* src/option_processing.cc
* test/OptionHandlerTest.cc
* test/OptionParserTest.cc
Added --bt-external-ip option. You can specify the external IP
address to report to a BitTorrent tracker. Although this
function is named 'external', it can accept any kind of IP
addresses.
* src/DefaultBtAnnounce.cc
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/DefaultBtAnnounceTest.cc
Added experimental built-in HTTP server. Currently, when a
client accesses to the server, it responds with the current
download progress. By default, it is disabled. To enable the
server, give --enable-http-server option. To change the default
port number for the server to listen to, use
--http-server-listen-port option.
The response HTML is very simple and refreshes it self each 1
second. Because of this refresh, you see flicker in normal web
browser such as Firefox. I recommend to use console-based
browser such as elinks, w3m. To connect to the server, run
'elinks http://localhost:6800/' while running aria2. Please
replace port number '6800'(which is default) with your
preference.
* src/DownloadEngineFactory.cc
* src/HttpHeader.cc
* src/HttpHeader.h
* src/HttpHeaderProcessor.cc
* src/HttpHeaderProcessor.h
* src/HttpListenCommand.cc
* src/HttpListenCommand.h
* src/HttpServer.cc
* src/HttpServer.h
* src/HttpServerCommand.cc
* src/HttpServerCommand.h
* src/HttpServerResponseCommand.cc
* src/HttpServerResponseCommand.h
* src/Makefile.am
* src/OptionHandlerFactory.cc
* src/Util.cc
* src/Util.h
* src/help_tags.h
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/HttpHeaderProcessorTest.cc
* test/UtilTest.cc
Added --bt-max-peers option to specify the maximum number of
peers per torrent. 0 means unlimited number of peers.
* src/ActivePeerConnectionCommand.cc
* src/BtRuntime.h
* src/DefaultPeerStorage.cc
* src/DefaultPeerStorage.h
* src/OptionHandlerFactory.cc
* src/RequestGroup.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/DefaultPeerStorageTest.cc
Added --bt-hash-check-seed option. If true is given to this
option, after hash check using --check-integrity option and file
is complete, continue to seed file. If you want to check file
and download it only when it is damaged or incomplete, set this
option to false. This option has effect only on BitTorrent
download. The default value is true(This is the same behavior
with the previous release).
* src/BtCheckIntegrityEntry.cc
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added --event-poll option to select the method for polling
events.
The available methods are "select" and "epoll". "epoll" is
available on Linux only. The earlier release has the compile
option to choose from these methods.
* configure.ac
* src/RequestGroupMan.cc
* src/OptionHandlerFactory.cc
* src/EpollEventPoll.h
* src/StreamFileAllocationEntry.cc
* src/a2io.h
* src/SelectEventPoll.h
* src/option_processing.cc
* src/prefs.h
* src/EpollEventPoll.cc
* src/EventPoll.h
* src/SocketCore.h
* src/Makefile.am
* src/main.cc
* src/DownloadEngine.h
* src/SelectEventPoll.cc
* src/DownloadEngine.cc
* src/SocketCore.cc
* src/DownloadEngineFactory.cc
* src/Makefile.in
* src/prefs.cc
* src/usage_text.h
Applied AdaptiveURISelector patch from Aurelien Lefebvre. This
patch adds AdaptiveURISelector, which selects one of the bests
mirrors for first and reserved connections. For supplementary
ones, it returns mirrors which has not been tested yet, and if
each of them already tested, returns mirrors which has to be
tested again. Otherwise, it doesn't return anymore mirrors.
* src/AdaptiveURISelector.cc
* src/AdaptiveURISelector.h
* src/FtpNegotiationCommand.cc
* src/HttpResponseCommand.cc
* src/Makefile.am
* src/Makefile.in
* src/OptionHandlerFactory.cc
* src/RequestGroup.cc
* src/RequestGroup.h
* src/RequestGroupMan.cc
* src/ServerStat.cc
* src/ServerStat.h
* src/ServerStatMan.cc
* src/SpeedCalc.cc
* src/URISelector.h
* src/prefs.cc
* src/prefs.h
* test/RequestGroupManTest.cc
* test/ServerStatManTest.cc
* test/ServerStatTest.cc
Added --use-head option to toggle whether HEAD method should be
used in the first HTTP request. By default aria2 uses HEAD
method as the first request. When the server doesn't recognize
HEAD, then give aria2 --use-head=false to force aria2 to use GET
method instead.
* src/OptionHandlerFactory.cc
* src/RequestGroupMan.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added --max-overall-upload-limit option. This option limits the
overall upload speed. Stated in help message that the existing
--max-upload-limit option limits the upload speed per each
torrent. Man page is also updated.
* doc/aria2c.1.txt
* src/DefaultBtMessageDispatcher.cc
* src/DefaultBtMessageDispatcher.h
* src/OptionHandlerFactory.cc
* src/PeerInteractionCommand.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Enabled --check-certificate by default. Added compile
time(configure) option --with-ca-bundle to specify CA bundle.
Warn if --check-certificate=true and --ca-certificate is not
specified or loading CA certificate is failed.
* configure.ac
* src/MultiUrlRequestInfo.cc
* src/OptionHandlerFactory.cc
* src/message.h
Added `https' tag to help option category. Added https tag to
--ca-certificate, --certificate, --check-certificate and
--private-key option.
* src/OptionHandlerFactory.cc
* src/help_tags.h
* src/option_processing.cc
Made the default value of --ftp-pasv option set to true and it
can take true/false values.
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/usage_text.h
* doc/aria2c.1.txt
Added --no-proxy option. It receives comman separated hostname
or domains to which proxy should not be used.
aria2 honors the environment variable no_proxy to override
no-proxy value in configuration file. The user can override the
environment variable no_proxy with --no-proxy command-line
option.
* src/AbstractCommand.cc
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added the ability to verify peer in SSL/TLS using given CA
certificates.
The CA certificates are specified in --ca-certificate option.
By default, the verification is disabled. Use --check-certificate
option to enable it.
* src/HttpRequestCommand.cc
* src/LibgnutlsTLSContext.cc
* src/LibgnutlsTLSContext.h
* src/LibsslTLSContext.cc
* src/LibsslTLSContext.h
* src/MultiUrlRequestInfo.cc
* src/OptionHandlerFactory.cc
* src/SocketCore.cc
* src/SocketCore.h
* src/a2functional.h
* src/message.h
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added client certificate authentication for SSL/TLS.
Currently a private key must be decrypted for use with aria2.
If a user accidentally gives encrypted file to aria2 then
following thing happens:
If encrypted private key is given to aria2, it behaves
differently depending on the ssl library it uses. If aria2 built
with openssl then openssl prompts the user for password.
If aria2 build with gnutls then aria2 exists with error at start up.
* src/DownloadEngineFactory.cc
* src/MultiUrlRequestInfo.cc
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added --auto-save-interval=SEC option. A control file(*.aria2)
is saved
every SEC seconds.
* src/DownloadEngineFactory.cc
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/usage_text.h
Added --dht-file-path option to change the path to dht.dat,
which is a
serialized DHT routing table.
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/usage_text.h
Use netrc for HTTP.
Now FTP user/password is sent in Authorization header when
--ftp-via-http-proxy=get is given.
* src/AuthConfigFactory.cc
* src/HttpRequest.cc
* src/HttpRequest.h
* src/NetrcAuthResolver.cc
* src/NetrcAuthResolver.h
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* test/AuthConfigFactoryTest.cc
* test/HttpRequestTest.cc
* test/NetrcAuthResolverTest.cc
Added --max-file-not-found=NUM option. If aria2 receives `file
not
found' error from HTTP/FTP server NUM times without getting
single
bytes of data, then force the download to fail.
Basically aria2 tris all URIs available. So if long list of URIs
are
specified in Metalink, then aria2 will take a long time to fail
eventually if all URIs are outdated. This option eases this
situation
to limit the number of servers to try.
* src/FtpNegotiationCommand.cc
* src/HelpItemFactory.cc
* src/HttpResponseCommand.cc
* src/OptionHandlerFactory.cc
* src/PeerStat.h
* src/RequestGroup.cc
* src/RequestGroup.h
* src/SegmentMan.cc
* src/SegmentMan.h
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added --connect-timeout option to specify connect timeout in
seconds.
This option is in effect for HTTP/FTP/proxy server. The timeout
for
connecting to BitTorrent peer is not controlled by this option.
* src/AbstractProxyRequestCommand.cc
* src/FtpNegotiationCommand.cc
* src/HelpItemFactory.cc
* src/HttpRequestCommand.cc
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Implemented the ability to get timestamp from remote HTTP server
and
apply it to local file. To enable this feature, --remote-time
option
is added. No usage text has been written yet.
If several servers returns difference timestamp, then aria2 uses
latest
one.
* src/CopyDiskAdaptor.cc
* src/CopyDiskAdaptor.h
* src/DirectDiskAdaptor.cc
* src/DirectDiskAdaptor.h
* src/DiskAdaptor.h
* src/File.cc
* src/File.h
* src/HttpHeader.cc
* src/HttpHeader.h
* src/HttpResponse.cc
* src/HttpResponse.h
* src/HttpResponseCommand.cc
* src/HttpResponseCommand.h
* src/MultiDiskAdaptor.cc
* src/MultiDiskAdaptor.h
* src/OptionHandlerFactory.cc
* src/RequestGroup.cc
* src/RequestGroup.h
* src/RequestGroupMan.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* test/CopyDiskAdaptorTest.cc
* test/FileTest.cc
* test/Makefile.am
* test/Makefile.in
* test/MultiDiskAdaptorTest.cc
* test/TestUtil.cc
Added options to load/save the server's performance/status to a
file
and the timeout to drop their data.
--server-stat-of=FILE specifies the file to which performance
data
is saved.
--server-stat-if=FILE specifies the file to read previously
saved
by --server-stat-of option. Might be used with
--uri-selector=feedback.
--server-stat-timeout=TIMEOUT specifies timeout to invalidate
the data.
TIMEOUT is specified in seconds and the default value is
24hours.
* src/MultiUrlRequestInfo.cc
* src/OptionHandlerFactory.cc
* src/RequestGroupMan.cc
* src/RequestGroupMan.h
* src/ServerStatMan.cc
* src/ServerStatMan.h
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* test/ServerStatManTest.cc
Implemented download speed based URI selection algorithm.
Introduced new option --uri-selector.
If --uri-selector=feedback is given, aria2 uses download speed
observed
in the previous downloads and chooses fastest server in the URI
list.
Currently at most 10 URIs are considered to introduce
randomeness for
finding better servers. The speed is average download speed in
the
downloads.
On the other hand, if --uri-selector=inorder is given, which is
default,
URI is tried in order in URI list.
The usage text for the new option has not been written yet.
* src/AbstractCommand.cc
* src/DownloadCommand.cc
* src/DownloadEngine.cc
* src/DownloadEngineFactory.cc
* src/InOrderURISelector.cc
* src/InOrderURISelector.h
* src/OptionHandlerFactory.cc
* src/PeerStat.h
* src/RequestGroup.cc
* src/RequestGroup.h
* src/RequestGroupMan.cc
* src/RequestGroupMan.h
* src/SegmentMan.cc
* src/SegmentMan.h
* src/ServerStat.cc
* src/ServerStat.h
* src/ServerStatMan.cc
* src/ServerStatMan.h
* src/ServerStatURISelector.cc
* src/ServerStatURISelector.h
* src/URISelector.h
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* test/InOrderURISelectorTest.cc
* test/RequestGroupManTest.cc
* test/ServerStatManTest.cc
* test/ServerStatURISelectorTest.cc
Renamed --bt-seed option as --bt-seed-unverified so that it
makes clear
that this is not going to verify files using piece hashes.
* src/HelpItemFactory.cc
* src/OptionHandlerFactory.cc
* src/RequestGroup.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Changed default value of -s option from 1 to 5.
Also max value of -s option is changed from 5 to 16.
* src/HelpItemFactory.cc
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/usage_text.h
Defined option name and possible values as std::string to reduce
temporary string object creation in runtime.
* src/HelpItemFactory.cc
* src/LogFactory.cc
* src/Option.cc
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
Print download progress summary of all parallel downloads in specified
interval, default 60 secs. While aria2 could download several files
in parallel (see -j option), it displayed just first download progress,
and the other downloads are hidden from the users. This new feature
prints all downloads currently in-progress to the console so that you
can check the status of all downloads. The interval can be adjusted
by --summary-interval option.
The progress readout is now cut so that all fits in the one line of
console.
* src/ConsoleStatCalc.cc
* src/ConsoleStatCalc.h
* src/HelpItemFactory.cc
* src/OptionHandlerFactory.cc
* src/RequestGroupMan.cc
* src/RequestGroupMan.h
* src/main.cc
* src/option_processing.cc
* src/prefs.h
* src/usage_text.h
Added the ability to reuse connection in FTP and it is enabled
by
default. It can be disabled by --ftp-reuse-connection=false
option.
* src/Command.cc
* src/DownloadCommand.cc
* src/FtpDownloadCommand.cc
* src/FtpDownloadCommand.h
* src/FtpFinishDownloadCommand.cc
* src/FtpFinishDownloadCommand.h
* src/FtpInitiateConnectionCommand.cc
* src/FtpNegotiationCommand.cc
* src/FtpNegotiationCommand.h
* src/HelpItemFactory.cc
* src/Makefile.am
* src/Makefile.in
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/prefs.h
* src/usage_text.h
Added --quiet option to make aria2 quiet (no console output).
--quiet option is tagged with ADVANCED.
* src/HelpItemFactory.cc
* src/LogFactory.cc
* src/LogFactory.h
* src/MultiUrlRequestInfo.cc
* src/MultiUrlRequestInfo.h
* src/NullStatCalc.h: New class. This class prints nothing.
* src/OptionHandlerFactory.cc
* src/main.cc
* src/option_processing.cc
* src/prefs.h
* src/usage_text.h
Rewritten SharedHandle. Now copy constructor taking raw pointer
has
keyword explicit and SharedHandle's default constructor
initializes
its internal obj to null, old implementation initializes it
using
obj's default constructor.
To assign null, write SharedHandle<T> x(...); x.reset();
TODO: test/SharedHandleTest.cc needs more tests.
* src/SharedHandle.h
Change the unit of --stop option from a minute to a second.
* src/usage_text.h
* src/DownloadEngineFactory.cc
* src/OptionHandlerFactory.cc
* src/message.h
* src/TimedHaltCommand.cc
Added the ability to stop aria2 itself when given time has
passed
from start. Use --stop option to specify time in minutes.
When 0 is given, this feature is disabled.
* src/OptionHandlerFactory.cc
* src/TimeBasedCommand.h: Make _interval protected scope.
* src/HelpItemFactory.cc
* src/option_processing.cc
* src/prefs.h
* src/FillRequestGroupCommand.cc: Evaluate _e->isHaltRequested()
before calling RequestGroupMan::fillRequestGroupFromReserver().
Without this modification, the result list shows "ERR" when
aria2 is
stopped by --stop option. It should be "INPR".
* src/DownloadEngine.{h, cc}
* src/DownloadEngineFactory.cc
* src/usage_text.h
* src/TimedHaltCommand.{h, cc}: New class.
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
If several protocols are available for a mirror, aria2 now use
one of
them. --metalink-preferred-protocol option was added to specify
the
preference of protocol.
* src/AbstractCommand.cc
* src/OptionHandlerFactory.cc
* src/ServerHost.{h, cc}
* src/Metalink2RequestGroup.cc
* src/RequestGroup.{h, cc}
* test/RequestGroupTest.cc
* src/option_processing.cc
* src/prefs.h
* src/HttpResponseCommand.cc
* src/MetalinkResource.{h, cc}
* src/FtpNegotiationCommand.cc
* src/MetalinkEntry.{h, cc}
* src/MetalinkEntryTest.cc
Added direct I/O support. The current implementation uses O_DIRECT,
which is not posix standard and is tested on linux 2.6.21.
Currently only file allocation uses direct I/O.
* src/SingleFileAllocationIterator.{h, cc}
* test/SingleFileAllocationIteratorTest.cc
* src/MultiFileAllocationIterator.{h, cc}
* test/MultiFileAllocationIteratorTest.cc
* src/BinaryStream.h
* src/DiskWriter.h
* src/AbstractDiskWriter.{h, cc}
* src/ByteArrayDiskWriter.h
* src/DiskAdaptor.h
* src/AbstractSingleDiskAdaptor.{h, cc}
* src/MultiDiskAdaptor.{h, cc}
* src/FileAllocationEntry.cc
* src/Util.{h, cc}
* src/OptionHandlerFactory.cc
* src/prefs.h
* src/version_usage.cc
* src/option_processing.cc
Moved FileAllocationMan::markCurrentFileAllocationEntryDone() to
handleException.
* src/MultiFileAllocationIterator.cc
Added EINTR handling
* src/SocketCore.cc
Rewritten to add content-type support.
* src/DownloadHandler.{h, cc}
* src/BtPostDownloadHandler.{h, cc}
* test/BtPostDownloadHandlerTest.cc
* src/MetalinkPostDownloadHandler.{h, cc}
* test/MetalinkPostDownloadHandlerTest.cc
* src/PostDownloadHandler.{h, cc}
* src/DownloadHandlerConstants.{h, cc}
* src/RequestGroup.cc
* src/HttpResponseCommand.cc
* src/FtpNegotiationCommand.cc
* src/SingleFileDownloadContext.{h, cc}
* src/RequestGroup.h
* src/RequestGroupCriteria.h
* src/ContentTypeRequestGroupCriteria.h
Added 'mem' option value for --follow-metalink,
--follow-torrent.
If it is give, metalink/torrent file is not written to the disk,
but
just is kept in memory. Parsing is occurred on memory.
* src/MetalinkHelper.{h, cc}
* src/MetalinkProcessor.h
* src/Xml2MetalinkProcessor.{h, cc}
* test/Xml2MetalinkProcessorTest.cc
* src/DownloadHandlerFactory.{h, cc}
* test/DownloadHandlerFactoryTest.cc
* src/PreDownloadHandler.{h, cc}
* src/OptionHandlerFactory.cc
* src/DefaultBtContext.{h, cc}
* test/DefaultBtContextTest.cc
* src/version_usage.cc
* src/Metalink2RequestGroup.{h, cc}
* src/RequestGroup.{h, cc}
* src/a2functional.h
* test/a2functionalTest.cc
* src/MemoryBufferPreDownloadHandler.{h, cc}
* src/OptionHandlerImpl.h
* src/prefs.h
* src/Util.{h, cc}
* test/UtilTest.cc
Keep DownloadResult rather than RequestGroup after downloads to
reduce
memory usage.
* src/RequestGroupMan.{h, cc}
* src/DownloadEngine.cc
* src/BtDependency.{h, cc}: Changed the type of dependee from
WeakHandle to SharedHandle because WeakHandle could be null.
* src/RequestGroup.{h, cc}
* src/DownloadEngineFactory.cc
* src/DownloadResult.h
Set totalLength after download finished
* src/UnknownLengthPieceStorage.{h, cc}
Keep torrent file specified in metalink in memory.
* src/Metalink2RequestGroup.cc
* src/BtDependency.cc
* src/TrueRequestGroupCriteria.h
Fixed the bug: seekg is used where seekp should be used.
* src/ByteArrayDiskWriter.cc
* test/ByteArraydiskWriterTest.cc
Preallocate non-requested file which is adjacent forward to
requested
file('requested' files means the files given in --select-file
option)
if they share a same piece.
This fixes long pause in the file system which doesn't support
sparse
files like FAT32 while downloading.
* src/MultiFileAllocationIterator.{h, cc}
* test/MultiFileAllocationIteratorTest.cc
* src/FileEntry.{h, cc}
Removed unused _option.
* src/MultiDiskAdaptor.h
* test/MultiDiskAdaptorTest.cc
* src/DefaultPieceStorage.cc
Set the default value of --seed-ratio to 1.0.
If 0.0 is given, then seeding continues regardless of share
ratio.
* src/version_usage.cc
* src/option_processing.cc
* src/BtSetup.cc
* doc/aria2c.1.txt
* doc/aria2c.1
Fixed: Selective download is not working in BitTorrent
* src/RequestGroup.cc
Introduced Sequence class. Use this instead of
Util::unfoldRange()
* src/PieceStorage.h
* test/MockPieceStorage.h
* src/UnknownLengthPieceStorage.h
* src/DefaultPieceStorage.{h, cc}
* src/Metalink2RequestGroup.cc
* src/RequestGroup.cc
* src/Sequence.h
* test/SequenceTest.cc
* src/IntSequence.h
* src/message.h
* src/Util.{h, cc}
* test/UtilTest.cc
Added new function 'parse' to catch exception thrown by
subclass's
parseArg
* src/OptionHandler.h
* src/OptionParser.cc
* src/NameMatchOptionHandler.h
* src/OptionHandlerImpl.h
* test/OptionHandlerTest.cc
Added IntegerRangeOptionHandler. Used for --listen-port and
--select-file. Now --listen-port accepts range of port.
* src/OptionHandlerFactory.cc
* src/version_usage.cc
* src/OptionHandlerImpl.h
* src/option_processing.cc
* src/BtSetup.cc
* src/PeerListenCommand.{h, cc}
* doc/aria2c.1.txt
* doc/aria2c.1
Implemented operator< for Exception class to provide easy way to
print
exception stack trace.
* src/Exception.{h, cc}
* src/main.cc
* src/option_processing.cc
Disable parameterized URI support by default. Added -P option to
enable the feature.
* src/prefs.h: Added PREF_PARAMETERIZED_URI
* src/OptionHandlerFactory.cc
* src/main.cc: Also updated usages for -Z and
--auto-file-renaming
Updated Japanese translation.
* po/ja.po
Added parameterized URI support.
* src/main.cc: -Z option added.
* src/OptionHandlerFactory.cc
* src/prefs.h: Added PREF_FORCE_SEQUENTIAL.
* src/PStringDatum.h: New class.
* src/PStringSegment.{h,cc}: New class.
* src/PStringNumLoop.h: New class.
* src/PStringSelect.h: New class.
* src/NumberDecorator.h: New class.
* src/FixedWidthNumberDecorator.h: New class.
* src/AlphaNumberDecorator.h: New class.
* src/PStringVisitor.h: New class.
* src/PStringBuildVisitor.{h,cc}: New class.
* src/ParameterizedStringParser.{h,cc}: New class.
* src/Util.{h,cc}
(isNumber): New function.
(isLowercase): New function.
(isUppercase): New function.
(alphaToNum): New function.
* test/ParameterizedStringParserTest.cc: New class.
* test/AlphaNumberDecoratorTest.cc: New class.
* test/PStringBuildVisitorTest.cc: New class.
* test/UtilTest.cc
(testIsNumber): New function.
(testIsLowercase): New function.
(testIsUppercase): New function.
(testAlphaToNum): New function.
Added '\n' after the error message
* src/RequestInfo.h (printDownloadAbortMessage)
Avoid sparse files if possible, because VFAT32 doesn't support
it.
* src/DefaultDiskWriter.cc (initAndOpenFile)
Fixed the bug that prevents file allocation is not done when
dowloading multi-torrent file.
* src/AbstractDiskWriter.cc (openFile)
Increase the maximum number of -j option from 15 to 45.
* src/OptionHandlerFactory.cc (createOptionHandlers)
Added fr.po, thanks to Charles Landemaine.
* po/fr.po
* po/LINGUAS
Fixed the bug that prevents cookies from being sent to the
server
if the domain of cookie is FQDN and starts with ".".
* src/Cookie.cc (match)
To add the ability to change peer id.
* src/DefaultBtContext.h
(_peerIdPrefix): New variable
(setPeerIdPrefix): New function.
* src/torrentRequestInfo.cc
(execute): Set the option value of PREF_PEER_ID_PREFIX to
DefaultBtContext.
* src/main.cc (main): Added peer-id-prefix command-line option.
The usage message is not added yet.
* src/DefaultBtContext.cc
(generatePeerId): Use _peerIdPrefix.
* src/prefs.h (PREF_PEER_ID_PREFIX): New definition.
To add the command-line option which disables netrc support:
* src/OptionHandlerFactory.cc
(createOptionHandlers): Added PREF_NO_NETRC.
* src/main.cc: Added -n option.
* src/prefs.h (PREF_NO_NETRC): New definition.
* src/RequestFactory.cc: Do not use netrc in ftp if
PREF_NO_NETRC is
V_TRUE.
Note that netrc is not used in http, http proxy even if
PREF_NO_NETRC
is V_FALSE. This may get configurable in the future release.
To clear peer's error status by time basis:
* src/PeerAbstractCommand.cc
(onAbort): Call Peer::startBadCondition().
* src/Peer.h, src/Peer.cc
(error): Removed.
(_badConditionStartTime): New variable.
(_badConditionInterval): New variable. Initialized to 10
seconds.
(startBadCondition): New function.
(isGood): New function.
* src/DefaultPeerStorage.cc
(addPeer): Use Peer::isGood().
(FindFinePeer): Use Peer::isGood().
Always include port number in http request header:
* src/HttpRequest.cc (getHostText): Always include port number
in
http request header.
To the ability to read options from a config file:
* src/main.cc: Command-line parameter validation is delegated to
OptionHandler class.
* src/OptionHandlerFactory.h, src/OptionHandlerFactory.cc: New
class.
* src/Option.h, src/Option.cc (clear): New function.
* src/OptionParser.h, src/OptionParser.cc: New class.
* src/OptionHandler.h: New class.
* src/NameMatchOptionHandler.h: New class.
* src/OptionHandlerImpl.h: New classes.
* src/prefs.h: '_' -> '-'
(FTP_PASV_ENABLED): Renamed to FTP_PASV.
(FTP_PASV): New definition.
* src/Util.h, src/Util.cc (getRealSize): New function.
To disable netrc support if .netrc file does not have correct
permissions:
* src/File.h, src/File.cc (mode): New function.
To prevent confidential information to be logged:
* src/HttpConnection.h, src/HttpConnection.cc
(eraseConfidentialInfo): New function.
(sendRequest): Call eraseConfidentialInfo().
(sendProxyRequest): Call eraseConfidentialInfo().
* src/main.cc: Validate permissions of .netrc file.
To add --user-agent command-line option:
* src/main.cc: Added new command line option: --user-agent
* src/prefs.h (PREF_USER_AGENT): New definition.
* src/HttpRequestCommand.cc (executeInternal): Set user-agent
option
parameter to HttpRequest object.
Marged the patches from Dan Fandrich.
Tatsuhiro Tsujikawa