fix config.json

app/router/condition_geoip_test.go

@@ -13,6 +13,33 @@ import (
 	"v2ray.com/ext/sysio"
 )
 
+func TestGeoIPMatcherContainer(t *testing.T) {
+	container := &router.GeoIPMatcherContainer{}
+
+	m1, err := container.Add(&router.GeoIP{
+		CountryCode: "CN",
+	})
+	common.Must(err)
+
+	m2, err := container.Add(&router.GeoIP{
+		CountryCode: "US",
+	})
+	common.Must(err)
+
+	m3, err := container.Add(&router.GeoIP{
+		CountryCode: "CN",
+	})
+	common.Must(err)
+
+	if m1 != m3 {
+		t.Error("expect same matcher for same geoip, but not")
+	}
+
+	if m1 == m2 {
+		t.Error("expect different matcher for different geoip, but actually same")
+	}
+}
+
 func TestGeoIPMatcher(t *testing.T) {
 	cidrList := router.CIDRList{
 		{Ip: []byte{0, 0, 0, 0}, Prefix: 8},

common/mux/client.go

@@ -25,7 +25,7 @@ type ClientManager struct {
 }
 
 func (m *ClientManager) Dispatch(ctx context.Context, link *transport.Link) error {
-	for {
+	for i := 0; i < 16; i++ {
 		worker, err := m.Picker.PickAvailable()
 		if err != nil {
 			return err
@@ -34,6 +34,8 @@ func (m *ClientManager) Dispatch(ctx context.Context, link *transport.Link) erro
 			return nil
 		}
 	}
+
+	return newError("unable to find an available mux client")
 }
 
 type WorkerPicker interface {

common/net/address.go

@@ -70,6 +70,10 @@ type Address interface {
 	String() string // String representation of this Address
 }
 
+func isAlphaNum(c byte) bool {
+	return (c >= '0' && c <= '9') || (c >= 'a' && c <= 'z') || (c >= 'A' && c <= 'Z')
+}
+
 // ParseAddress parses a string into an Address. The return value will be an IPAddress when
 // the string is in the form of IPv4 or IPv6 address, or a DomainAddress otherwise.
 func ParseAddress(addr string) Address {
@@ -77,8 +81,12 @@ func ParseAddress(addr string) Address {
 	lenAddr := len(addr)
 	if lenAddr > 0 && addr[0] == '[' && addr[lenAddr-1] == ']' {
 		addr = addr[1 : lenAddr-1]
+		lenAddr -= 2
+	}
+
+	if lenAddr > 0 && (!isAlphaNum(addr[0]) || !isAlphaNum(addr[len(addr)-1])) {
+		addr = strings.TrimSpace(addr)
 	}
-	addr = strings.TrimSpace(addr)
 
 	ip := net.ParseIP(addr)
 	if ip != nil {

common/net/address_test.go

@@ -101,3 +101,21 @@ func TestIPOrDomain(t *testing.T) {
 	assert(NewIPOrDomain(ParseAddress("8.8.8.8")).AsAddress(), Equals, ParseAddress("8.8.8.8"))
 	assert(NewIPOrDomain(ParseAddress("2001:4860:0:2001::68")).AsAddress(), Equals, ParseAddress("2001:4860:0:2001::68"))
 }
+
+func BenchmarkParseAddressIPv4(b *testing.B) {
+	for i := 0; i < b.N; i++ {
+		_ = ParseAddress("8.8.8.8")
+	}
+}
+
+func BenchmarkParseAddressIPv6(b *testing.B) {
+	for i := 0; i < b.N; i++ {
+		_ = ParseAddress("2001:4860:0:2001::68")
+	}
+}
+
+func BenchmarkParseAddressDomain(b *testing.B) {
+	for i := 0; i < b.N; i++ {
+		_ = ParseAddress("v2ray.com")
+	}
+}

core.go

@@ -17,7 +17,7 @@ import (
 )
 
 const (
-	version  = "4.1"
+	version  = "4.2"
 	build    = "Custom"
 	codename = "Po"
 	intro    = "A unified platform for anti-censorship."

release/config/config.json

@@ -1,25 +1,118 @@
+// Config file of V2Ray. This file follows standard JSON format, with comments support.
+// Uncomment entries below to satisfy your needs. Also read our manual for more detail at
+// https://www.v2ray.com/
 {
   "log": {
+    // By default, V2Ray writes access log to stdout.
+    // "access": "/path/to/access/log/file",
+
+    // By default, V2Ray write error log to stdout.
+    // "error": "/path/to/error/log/file",
+
+    // Log level, one of "debug", "info", "warning", "error", "none"
     "loglevel": "warning"
   },
-  "inbound": {
+  // List of inbound proxy configurations.
+  "inbounds": [{
+    // Port to listen on. You may need root access if the value is less than 1024.
     "port": 1080,
+
+    // IP address to listen on. Change to "0.0.0.0" to listen on all network interfaces.
     "listen": "127.0.0.1",
+
+    // Tag of the inbound proxy. May be used for routing.
+    "tag": "socks-inbound",
+
+    // Protocol name of inbound proxy.
     "protocol": "socks",
+
+    // Settings of the protocol. Varies based on protocol.
     "settings": {
       "auth": "noauth",
       "udp": false,
       "ip": "127.0.0.1"
     }
-  },
-  "outbound": {
+  }],
+  // List of outbound proxy configurations.
+  "outbounds": [{
+    // Protocol name of the outbound proxy.
     "protocol": "freedom",
+
+    // Settings of the protocol. Varies based on protocol.
     "settings": {},
+
+    // Tag of the outbound. May be used for routing.
     "tag": "direct"
+  },{
+    "protocol": "blackhole",
+    "settings": {},
+    "tag": "blocked"
+  }],
+
+  // Transport is for global transport settings. If you have multiple transports with same settings
+  // (say mKCP), you may put it here, instead of in each individual inbound/outbounds.
+  //"transport": {},
+
+  // Routing controls how traffic from inbounds are sent to outbounds.
+  "routing": {
+    "domainStrategy": "IPOnDemand",
+    "rules":[{
+      "type": "field",
+      "ip": ["geoip:private"],
+      "outboundTag": "blocked"
+    }]
   },
+
+  // Dns settings for domain resolution.
+  "dns": {
+    // Static hosts, similar to hosts file.
+    "hosts": {
+      // Blacklist all Baidu domains, including all sub domains.
+      "domain:baidu.com": "127.0.0.1"
+    },
+    "servers": [
+      {
+        "address": "1.1.1.1",
+        "port": 53,
+        "domains": [
+          "domain:v2ray.com"
+        ]
+      },
+      "8.8.8.8",
+      "localhost"
+    ]
+  },
+
+  // Policy controls some internal behavior of how V2Ray handles connections.
+  // It may be on connection level by user levels in 'levels', or global settings in 'system.'
   "policy": {
+    // Connection policys by user levels
     "levels": {
-      "0": {"uplinkOnly": 0}
+      "0": {
+        "uplinkOnly": 0,
+        "downlinkOnly": 0
+      }
+    },
+    "system": {
+      "statsInboundUplink": false,
+      "statsInboundDownlink": false
     }
-  }
+  },
+
+  // Stats enables internal stats counter.
+  // This setting can be used together with Policy and Api. 
+  //"stats":{},
+
+  // Api enables gRPC APIs for external programs to communicate with V2Ray instance.
+  //"api": {
+    //"tag": "api",
+    //"services": [
+    //  "HandlerService",
+    //  "LoggerService",
+    //  "StatsService"
+    //]
+  //},
+
+  // You may add other entries to the configuration, but they will not be recognized by V2Ray.
+  "other": {}
 }