prometheus/storage/remote/queue_manager_test.go

572 lines
16 KiB
Go
Raw Normal View History

2017-05-10 09:44:13 +00:00
// Copyright 2013 The Prometheus Authors
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package remote
import (
"context"
2017-05-10 09:44:13 +00:00
"fmt"
"io/ioutil"
"math"
"os"
2017-10-23 20:28:17 +00:00
"reflect"
"sort"
"strconv"
2017-05-10 09:44:13 +00:00
"sync"
"sync/atomic"
"testing"
"time"
"github.com/go-kit/kit/log"
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
"github.com/gogo/protobuf/proto"
"github.com/golang/snappy"
client_testutil "github.com/prometheus/client_golang/prometheus/testutil"
2017-05-10 09:44:13 +00:00
"github.com/prometheus/common/model"
"github.com/prometheus/prometheus/config"
"github.com/prometheus/prometheus/pkg/labels"
2017-10-23 20:28:17 +00:00
"github.com/prometheus/prometheus/prompb"
tsdbLabels "github.com/prometheus/prometheus/tsdb/labels"
"github.com/prometheus/prometheus/tsdb/record"
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
"github.com/prometheus/prometheus/util/testutil"
2017-05-10 09:44:13 +00:00
)
const defaultFlushDeadline = 1 * time.Minute
2017-05-10 09:44:13 +00:00
func TestSampleDelivery(t *testing.T) {
// Let's create an even number of send batches so we don't run into the
// batch timeout case.
n := config.DefaultQueueConfig.MaxSamplesPerSend * 2
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
samples, series := createTimeseries(n)
2017-05-10 09:44:13 +00:00
c := NewTestStorageClient()
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
c.expectSamples(samples[:len(samples)/2], series)
2017-05-10 09:44:13 +00:00
cfg := config.DefaultQueueConfig
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
cfg.BatchSendDeadline = model.Duration(100 * time.Millisecond)
2017-05-10 09:44:13 +00:00
cfg.MaxShards = 1
dir, err := ioutil.TempDir("", "TestSampleDeliver")
testutil.Ok(t, err)
defer os.RemoveAll(dir)
m := NewQueueManager(nil, nil, dir, newEWMARate(ewmaWeight, shardUpdateDuration), cfg, nil, nil, c, defaultFlushDeadline)
m.StoreSeries(series, 0)
2017-05-10 09:44:13 +00:00
// These should be received by the client.
m.Start()
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
m.Append(samples[:len(samples)/2])
2017-05-10 09:44:13 +00:00
defer m.Stop()
c.waitForExpectedSamples(t)
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
m.Append(samples[len(samples)/2:])
c.expectSamples(samples[len(samples)/2:], series)
c.waitForExpectedSamples(t)
2017-05-10 09:44:13 +00:00
}
2018-03-12 15:35:43 +00:00
func TestSampleDeliveryTimeout(t *testing.T) {
2018-03-12 16:48:51 +00:00
// Let's send one less sample than batch size, and wait the timeout duration
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
n := 9
samples, series := createTimeseries(n)
2018-03-12 15:35:43 +00:00
c := NewTestStorageClient()
cfg := config.DefaultQueueConfig
cfg.MaxShards = 1
cfg.BatchSendDeadline = model.Duration(100 * time.Millisecond)
dir, err := ioutil.TempDir("", "TestSampleDeliveryTimeout")
testutil.Ok(t, err)
defer os.RemoveAll(dir)
m := NewQueueManager(nil, nil, dir, newEWMARate(ewmaWeight, shardUpdateDuration), cfg, nil, nil, c, defaultFlushDeadline)
m.StoreSeries(series, 0)
2018-03-12 15:35:43 +00:00
m.Start()
defer m.Stop()
// Send the samples twice, waiting for the samples in the meantime.
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
c.expectSamples(samples, series)
m.Append(samples)
2018-03-12 15:35:43 +00:00
c.waitForExpectedSamples(t)
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
c.expectSamples(samples, series)
m.Append(samples)
2018-03-12 15:35:43 +00:00
c.waitForExpectedSamples(t)
}
2017-05-10 09:44:13 +00:00
func TestSampleDeliveryOrder(t *testing.T) {
ts := 10
n := config.DefaultQueueConfig.MaxSamplesPerSend * ts
samples := make([]record.RefSample, 0, n)
series := make([]record.RefSeries, 0, n)
2017-05-10 09:44:13 +00:00
for i := 0; i < n; i++ {
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
name := fmt.Sprintf("test_metric_%d", i%ts)
samples = append(samples, record.RefSample{
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
Ref: uint64(i),
T: int64(i),
V: float64(i),
})
series = append(series, record.RefSeries{
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
Ref: uint64(i),
Labels: tsdbLabels.Labels{tsdbLabels.Label{Name: "__name__", Value: name}},
2017-05-10 09:44:13 +00:00
})
}
c := NewTestStorageClient()
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
c.expectSamples(samples, series)
dir, err := ioutil.TempDir("", "TestSampleDeliveryOrder")
testutil.Ok(t, err)
defer os.RemoveAll(dir)
m := NewQueueManager(nil, nil, dir, newEWMARate(ewmaWeight, shardUpdateDuration), config.DefaultQueueConfig, nil, nil, c, defaultFlushDeadline)
m.StoreSeries(series, 0)
2017-05-10 09:44:13 +00:00
m.Start()
defer m.Stop()
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
// These should be received by the client.
m.Append(samples)
2017-05-10 09:44:13 +00:00
c.waitForExpectedSamples(t)
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
func TestShutdown(t *testing.T) {
deadline := 1 * time.Second
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
c := NewTestBlockedStorageClient()
2017-05-10 09:44:13 +00:00
dir, err := ioutil.TempDir("", "TestShutdown")
testutil.Ok(t, err)
defer os.RemoveAll(dir)
m := NewQueueManager(nil, nil, dir, newEWMARate(ewmaWeight, shardUpdateDuration), config.DefaultQueueConfig, nil, nil, c, deadline)
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
samples, series := createTimeseries(2 * config.DefaultQueueConfig.MaxSamplesPerSend)
m.StoreSeries(series, 0)
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
m.Start()
// Append blocks to guarantee delivery, so we do it in the background.
go func() {
m.Append(samples)
}()
time.Sleep(100 * time.Millisecond)
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
// Test to ensure that Stop doesn't block.
start := time.Now()
m.Stop()
// The samples will never be delivered, so duration should
// be at least equal to deadline, otherwise the flush deadline
// was not respected.
duration := time.Since(start)
if duration > time.Duration(deadline+(deadline/10)) {
t.Errorf("Took too long to shutdown: %s > %s", duration, deadline)
}
if duration < time.Duration(deadline) {
t.Errorf("Shutdown occurred before flush deadline: %s < %s", duration, deadline)
2017-05-10 09:44:13 +00:00
}
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
func TestSeriesReset(t *testing.T) {
c := NewTestBlockedStorageClient()
deadline := 5 * time.Second
numSegments := 4
numSeries := 25
dir, err := ioutil.TempDir("", "TestSeriesReset")
testutil.Ok(t, err)
defer os.RemoveAll(dir)
m := NewQueueManager(nil, nil, dir, newEWMARate(ewmaWeight, shardUpdateDuration), config.DefaultQueueConfig, nil, nil, c, deadline)
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
for i := 0; i < numSegments; i++ {
series := []record.RefSeries{}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
for j := 0; j < numSeries; j++ {
series = append(series, record.RefSeries{Ref: uint64((i * 100) + j), Labels: tsdbLabels.Labels{{Name: "a", Value: "a"}}})
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
}
m.StoreSeries(series, i)
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
testutil.Equals(t, numSegments*numSeries, len(m.seriesLabels))
m.SeriesReset(2)
testutil.Equals(t, numSegments*numSeries/2, len(m.seriesLabels))
2017-05-10 09:44:13 +00:00
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
func TestReshard(t *testing.T) {
size := 10 // Make bigger to find more races.
n := config.DefaultQueueConfig.Capacity * size
samples, series := createTimeseries(n)
c := NewTestStorageClient()
c.expectSamples(samples, series)
cfg := config.DefaultQueueConfig
cfg.MaxShards = 1
dir, err := ioutil.TempDir("", "TestReshard")
testutil.Ok(t, err)
defer os.RemoveAll(dir)
m := NewQueueManager(nil, nil, dir, newEWMARate(ewmaWeight, shardUpdateDuration), cfg, nil, nil, c, defaultFlushDeadline)
m.StoreSeries(series, 0)
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
m.Start()
defer m.Stop()
go func() {
for i := 0; i < len(samples); i += config.DefaultQueueConfig.Capacity {
sent := m.Append(samples[i : i+config.DefaultQueueConfig.Capacity])
testutil.Assert(t, sent, "samples not sent")
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
time.Sleep(100 * time.Millisecond)
}
}()
for i := 1; i < len(samples)/config.DefaultQueueConfig.Capacity; i++ {
m.shards.stop()
m.shards.start(i)
time.Sleep(100 * time.Millisecond)
}
c.waitForExpectedSamples(t)
2017-05-10 09:44:13 +00:00
}
func TestReshardRaceWithStop(t *testing.T) {
c := NewTestStorageClient()
var m *QueueManager
h := sync.Mutex{}
h.Lock()
go func() {
for {
m = NewQueueManager(nil, nil, "", newEWMARate(ewmaWeight, shardUpdateDuration), config.DefaultQueueConfig, nil, nil, c, defaultFlushDeadline)
m.Start()
h.Unlock()
h.Lock()
m.Stop()
}
}()
for i := 1; i < 100; i++ {
h.Lock()
m.reshardChan <- i
h.Unlock()
}
}
func TestReleaseNoninternedString(t *testing.T) {
c := NewTestStorageClient()
m := NewQueueManager(nil, nil, "", newEWMARate(ewmaWeight, shardUpdateDuration), config.DefaultQueueConfig, nil, nil, c, defaultFlushDeadline)
m.Start()
for i := 1; i < 1000; i++ {
m.StoreSeries([]record.RefSeries{
{
Ref: uint64(i),
Labels: tsdbLabels.Labels{
tsdbLabels.Label{
Name: "asdf",
Value: fmt.Sprintf("%d", i),
},
},
},
}, 0)
m.SeriesReset(1)
}
metric := client_testutil.ToFloat64(noReferenceReleases)
testutil.Assert(t, metric == 0, "expected there to be no calls to release for strings that were not already interned: %d", int(metric))
}
func TestCalculateDesiredsShards(t *testing.T) {
type testcase struct {
startingShards int
samplesIn, samplesOut int64
reshard bool
}
cases := []testcase{
{
// Test that ensures that if we haven't successfully sent a
// sample recently the queue will not reshard.
startingShards: 10,
reshard: false,
samplesIn: 1000,
samplesOut: 10,
},
{
startingShards: 5,
reshard: true,
samplesIn: 1000,
samplesOut: 10,
},
}
for _, c := range cases {
client := NewTestStorageClient()
m := NewQueueManager(nil, nil, "", newEWMARate(ewmaWeight, shardUpdateDuration), config.DefaultQueueConfig, nil, nil, client, defaultFlushDeadline)
m.numShards = c.startingShards
m.samplesIn.incr(c.samplesIn)
m.samplesOut.incr(c.samplesOut)
m.lastSendTimestamp = time.Now().Unix()
// Resharding shouldn't take place if the last successful send was > batch send deadline*2 seconds ago.
if !c.reshard {
m.lastSendTimestamp = m.lastSendTimestamp - int64(3*time.Duration(config.DefaultQueueConfig.BatchSendDeadline)/time.Second)
}
m.Start()
desiredShards := m.calculateDesiredShards()
m.Stop()
if !c.reshard {
testutil.Assert(t, desiredShards == m.numShards, "expected calculateDesiredShards to not want to reshard, wants to change from %d to %d shards", m.numShards, desiredShards)
} else {
testutil.Assert(t, desiredShards != m.numShards, "expected calculateDesiredShards to want to reshard, wants to change from %d to %d shards", m.numShards, desiredShards)
}
}
}
func createTimeseries(n int) ([]record.RefSample, []record.RefSeries) {
samples := make([]record.RefSample, 0, n)
series := make([]record.RefSeries, 0, n)
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
for i := 0; i < n; i++ {
name := fmt.Sprintf("test_metric_%d", i)
samples = append(samples, record.RefSample{
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
Ref: uint64(i),
T: int64(i),
V: float64(i),
})
series = append(series, record.RefSeries{
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
Ref: uint64(i),
Labels: tsdbLabels.Labels{{Name: "__name__", Value: name}},
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
})
}
return samples, series
2017-05-10 09:44:13 +00:00
}
func getSeriesNameFromRef(r record.RefSeries) string {
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
for _, l := range r.Labels {
if l.Name == "__name__" {
return l.Value
}
}
return ""
2017-05-10 09:44:13 +00:00
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
type TestStorageClient struct {
receivedSamples map[string][]prompb.Sample
expectedSamples map[string][]prompb.Sample
wg sync.WaitGroup
mtx sync.Mutex
buf []byte
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
}
2017-05-10 09:44:13 +00:00
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
func NewTestStorageClient() *TestStorageClient {
return &TestStorageClient{
receivedSamples: map[string][]prompb.Sample{},
expectedSamples: map[string][]prompb.Sample{},
2017-05-10 09:44:13 +00:00
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
}
2017-05-10 09:44:13 +00:00
func (c *TestStorageClient) expectSamples(ss []record.RefSample, series []record.RefSeries) {
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
c.mtx.Lock()
defer c.mtx.Unlock()
2017-05-10 09:44:13 +00:00
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
c.expectedSamples = map[string][]prompb.Sample{}
c.receivedSamples = map[string][]prompb.Sample{}
2017-05-10 09:44:13 +00:00
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
for _, s := range ss {
seriesName := getSeriesNameFromRef(series[s.Ref])
c.expectedSamples[seriesName] = append(c.expectedSamples[seriesName], prompb.Sample{
Timestamp: s.T,
Value: s.V,
})
}
c.wg.Add(len(ss))
}
2017-05-10 09:44:13 +00:00
func (c *TestStorageClient) waitForExpectedSamples(tb testing.TB) {
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
c.wg.Wait()
c.mtx.Lock()
defer c.mtx.Unlock()
for ts, expectedSamples := range c.expectedSamples {
if !reflect.DeepEqual(expectedSamples, c.receivedSamples[ts]) {
tb.Fatalf("%s: Expected %v, got %v", ts, expectedSamples, c.receivedSamples[ts])
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
}
2017-05-10 09:44:13 +00:00
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
}
2017-05-10 09:44:13 +00:00
func (c *TestStorageClient) expectSampleCount(ss []record.RefSample) {
c.mtx.Lock()
defer c.mtx.Unlock()
c.wg.Add(len(ss))
}
func (c *TestStorageClient) waitForExpectedSampleCount() {
c.wg.Wait()
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
func (c *TestStorageClient) Store(_ context.Context, req []byte) error {
c.mtx.Lock()
defer c.mtx.Unlock()
// nil buffers are ok for snappy, ignore cast error.
if c.buf != nil {
c.buf = c.buf[:cap(c.buf)]
}
reqBuf, err := snappy.Decode(c.buf, req)
c.buf = reqBuf
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
if err != nil {
return err
2017-05-10 09:44:13 +00:00
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
var reqProto prompb.WriteRequest
if err := proto.Unmarshal(reqBuf, &reqProto); err != nil {
return err
2017-05-10 09:44:13 +00:00
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
count := 0
for _, ts := range reqProto.Timeseries {
var seriesName string
labels := labelProtosToLabels(ts.Labels)
for _, label := range labels {
if label.Name == "__name__" {
seriesName = label.Value
}
}
for _, sample := range ts.Samples {
count++
c.receivedSamples[seriesName] = append(c.receivedSamples[seriesName], sample)
}
2017-05-10 09:44:13 +00:00
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
c.wg.Add(-count)
return nil
2017-05-10 09:44:13 +00:00
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
func (c *TestStorageClient) Name() string {
return "teststorageclient"
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
2018-09-07 21:26:04 +00:00
// TestBlockingStorageClient is a queue_manager StorageClient which will block
// on any calls to Store(), until the request's Context is cancelled, at which
// point the `numCalls` property will contain a count of how many times Store()
// was called.
type TestBlockingStorageClient struct {
numCalls uint64
}
func NewTestBlockedStorageClient() *TestBlockingStorageClient {
return &TestBlockingStorageClient{}
}
func (c *TestBlockingStorageClient) Store(ctx context.Context, _ []byte) error {
atomic.AddUint64(&c.numCalls, 1)
<-ctx.Done()
return nil
}
func (c *TestBlockingStorageClient) NumCalls() uint64 {
return atomic.LoadUint64(&c.numCalls)
}
func (c *TestBlockingStorageClient) Name() string {
return "testblockingstorageclient"
}
func BenchmarkSampleDelivery(b *testing.B) {
// Let's create an even number of send batches so we don't run into the
// batch timeout case.
n := config.DefaultQueueConfig.MaxSamplesPerSend * 10
samples, series := createTimeseries(n)
c := NewTestStorageClient()
cfg := config.DefaultQueueConfig
cfg.BatchSendDeadline = model.Duration(100 * time.Millisecond)
cfg.MaxShards = 1
dir, err := ioutil.TempDir("", "BenchmarkSampleDelivery")
testutil.Ok(b, err)
defer os.RemoveAll(dir)
m := NewQueueManager(nil, nil, dir, newEWMARate(ewmaWeight, shardUpdateDuration), cfg, nil, nil, c, defaultFlushDeadline)
m.StoreSeries(series, 0)
// These should be received by the client.
m.Start()
defer m.Stop()
b.ResetTimer()
for i := 0; i < b.N; i++ {
c.expectSampleCount(samples)
m.Append(samples)
c.waitForExpectedSampleCount()
}
// Do not include shutdown
b.StopTimer()
}
func BenchmarkStartup(b *testing.B) {
dir := os.Getenv("WALDIR")
if dir == "" {
return
}
// Find the second largest segment; we will replay up to this.
// (Second largest as WALWatcher will start tailing the largest).
dirents, err := ioutil.ReadDir(dir)
testutil.Ok(b, err)
var segments []int
for _, dirent := range dirents {
if i, err := strconv.Atoi(dirent.Name()); err != nil {
segments = append(segments, i)
}
}
sort.Ints(segments)
logger := log.NewLogfmtLogger(log.NewSyncWriter(os.Stdout))
logger = log.With(logger, "caller", log.DefaultCaller)
for n := 0; n < b.N; n++ {
c := NewTestBlockedStorageClient()
m := NewQueueManager(nil, logger, dir,
newEWMARate(ewmaWeight, shardUpdateDuration),
config.DefaultQueueConfig, nil, nil, c, 1*time.Minute)
m.watcher.StartTime = math.MaxInt64
m.watcher.MaxSegment = segments[len(segments)-2]
err := m.watcher.Run()
testutil.Ok(b, err)
}
}
func TestProcessExternalLabels(t *testing.T) {
for _, tc := range []struct {
labels tsdbLabels.Labels
externalLabels labels.Labels
expected labels.Labels
}{
// Test adding labels at the end.
{
labels: tsdbLabels.Labels{{Name: "a", Value: "b"}},
externalLabels: labels.Labels{{Name: "c", Value: "d"}},
expected: labels.Labels{{Name: "a", Value: "b"}, {Name: "c", Value: "d"}},
},
// Test adding labels at the beginning.
{
labels: tsdbLabels.Labels{{Name: "c", Value: "d"}},
externalLabels: labels.Labels{{Name: "a", Value: "b"}},
expected: labels.Labels{{Name: "a", Value: "b"}, {Name: "c", Value: "d"}},
},
// Test we don't override existing labels.
{
labels: tsdbLabels.Labels{{Name: "a", Value: "b"}},
externalLabels: labels.Labels{{Name: "a", Value: "c"}},
expected: labels.Labels{{Name: "a", Value: "b"}},
},
} {
testutil.Equals(t, tc.expected, processExternalLabels(tc.labels, tc.externalLabels))
}
}