Automatic merge from submit-queue
Run flaky tests in parallel
We should try to emulate the main CI environment in the flaky test suite so that it is clear when a test can be moved out of the flaky suite. Since a common source of flakes is unintended interactions between tests running in parallel, we should run the flaky suite in parallel to better detect such flakes.
Automatic merge from submit-queue
Bump kubeadm to use kubernetes v1.4.1
v1.4.1 is going to be released tomorrow, so make kubeadm use it by default
This will make it possible to run kubeadm on Raspberry Pi's OOTB
We should strive towards releasing a second kubeadm release this week that's stable and has the small new tweaks we've coded these two weeks.
@errordeveloper @mikedanese
Automatic merge from submit-queue
log-dump.sh: Add a LOG_DUMP_USE_KUBECTL mode, refactor
**What this PR does / why we need it**: This refactors log-dump.sh so that it can optionally just use `"kubectl get node"` output, for dumping logs off a cluster that was brought up using something other than kube-up.sh (e.g. kops or kubeadm).
Note that for obvious reasons, if the cluster is fried, it'll probably fail to hit the apiserver and all bets are off, but for the 95% case where you're debugging tests, this is good. To cover the remaining 5%, you could actually squirrel away the relevant external IPs after the e2e.go:Up stage (because we better be able to hit the apiserver then) and fetch them from cache later.
**Special notes for your reviewer**: Sorry for so many changes. :)
Automatic merge from submit-queue
Clean up the link in cassandra
**What this PR does / why we need it**:
Clean up the link in README for cassandra
**Which issue this PR fixes** :
fixes#34431
Signed-off-by: yuexiao-wang <wang.yuexiao@zte.com.cn>
This refactors log-dump.sh so that it can optionally just use "kubectl
get node" output, for dumping logs off a cluster that was brought up
using sometihng other than kube-up.sh (e.g. kops or kubeadm).
Note that for obvious reasons, if the cluster is fried, it'll probably
fail to hit the apiserver and all bets are off, but for the 95% case
where you're debugging tests, this is good. To cover the remaining 5%,
you could actually squirrel away the relevant external IPs after the
e2e.go:Up stage (because we better be able to hit the apiserver then)
and fetch them from cache later.
Automatic merge from submit-queue
openstack: Support config-drive and improve CurrentNodeName, GetZone
This PR adds support for fetching local instance metadata via config-drive (as well as querying metadata service), and surfaces some additional metadata information (from either source):
- `CurrentNodeName` now returns the OpenStack instance name, rather than the current hostname (they might not be the same)
- `GetZone` includes availability zone label in `FailureDomain`
Thanks to @kiall for a WIP implementation of the latter.
Automatic merge from submit-queue
hack: update cherry-pick script to show subject when patch is split
<!-- Thanks for sending a pull request! Here are some tips for you:
1. If this is your first time, read our contributor guidelines https://github.com/kubernetes/kubernetes/blob/master/CONTRIBUTING.md and developer guide https://github.com/kubernetes/kubernetes/blob/master/docs/devel/development.md
2. If you want *faster* PR reviews, read how: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/faster_reviews.md
3. Follow the instructions for writing a release note: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/pull-requests.md#release-notes
-->
**What this PR does / why we need it**:
This is a continuation of #34049, which worked, but then I realized some patch files have more than one subject, see example: https://github.com/kubernetes/kubernetes/pull/34228
This cleans the output so it looks like this:
```
Automated cherry pick of #32593
Cherry pick of #32593 on release-1.4.
#32593: Fix audit_test regex for iso8601 timestamps
```
pretty!!!
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
Signed-off-by: Jess Frazelle <acidburn@google.com>
Automatic merge from submit-queue
Use nodeutil.GetHostIP consistently when talking to nodes
Most of our communications from apiserver -> nodes used
nodutil.GetNodeHostIP, but a few places didn't - and this meant that the
node name needed to be resolvable _and_ we needed to populate valid IP
addresses.
```release-note
The apiserver now uses addresses reported by the kubelet in the Node object's status for apiserver->kubelet communications, rather than the name of the Node object. The address type used defaults to `InternalIP`, `ExternalIP`, and `LegacyHostIP` address types, in that order.
```
Automatic merge from submit-queue
Federated deployment controller - part 1
Based on federated replicaset controller (copy + find/replace).
Remaining stuff:
- refacing out common elements to libs
- using owerref in pod analysis
- e2e tests
- renaming concurrency flag for rs and reusing it in deployment
- updating only one cluster at a time if rollingupdate strategy is used.
cc: @quinton-hoole @kubernetes/sig-cluster-federation
**Release note**:
```release-note
Federated deployment controller that supports the same api as the regular kubernetes deployment controller.
```
Automatic merge from submit-queue
hack/e2e.go: listen for Interrupt signal and attempt cleanup if run with --down
<!-- Thanks for sending a pull request! Here are some tips for you:
1. If this is your first time, read our contributor guidelines https://github.com/kubernetes/kubernetes/blob/master/CONTRIBUTING.md and developer guide https://github.com/kubernetes/kubernetes/blob/master/docs/devel/development.md
2. If you want *faster* PR reviews, read how: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/faster_reviews.md
3. Follow the instructions for writing a release note: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/pull-requests.md#release-notes
-->
**What this PR does / why we need it**: adds a listener on ^C, so if `hack/e2e.go` is run with `--down` and the user ^C, then it will attempt to cleanup the resources.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```release-note
NONE
```
Signed-off-by: Jess Frazelle <me@jessfraz.com>
Automatic merge from submit-queue
refactor controller as posthook when configured and enabled
builds on https://github.com/kubernetes/kubernetes/pull/33785 .
Models the bootstrap controller as a PostHook which is added when its API group is available and its configured.
@liggitt Stefan is out for a while.
Automatic merge from submit-queue
Match GroupVersionKind against specific version
Currently when multiple GVK match a specific kind in `KindForGroupVersionKinds` only the first will be matched, which not necessarily will be the correct one. I'm proposing to extend this to pick the best match, instead.
Here's my problematic use-case, of course it involves ScheduledJobs 😉:
I have a `GroupVersions` with `batch/v1` and `batch/v2alpha1` in that order. I'm calling `KindForGroupVersionKinds` with kind `batch/v2alpha1 ScheduledJob` and that currently results this matching first `GroupVersion`, instead of picking more concrete one. There's a [clear description](ee77d4e6ca/pkg/api/unversioned/group_version.go (L183)) why it is on single `GroupVersion`, but `GroupVersions` should pick this more carefully.
@deads2k this is your baby, wdyt?
Automatic merge from submit-queue
[Part 1] Implementation of equivalence pod
Part 1 of #30844
This PR:
- Refactored `predicate.go`, so that `GetResourceRequest` can be used in other places to `GetEquivalencePod`.
- Implement a `equivalence_cache.go` to deal with all information we need to calculate an equivalent pod.
- Define and register a `RegisterGetEquivalencePodFunction `.
Work in next PR:
- The update of `equivalence_cache.go`
- Unit test
- Integration/e2e test
I think we can begin from the `equivalence_cache.go`? Thanks. cc @wojtek-t @davidopp
If I missed any other necessary part, please point it out.
Automatic merge from submit-queue
Update documentation for running e2e tests locally
**What this PR does / why we need it**:
The docs for running e2e tests locally needs to be updated.
check_node_count option has been removed and developers usually
need to perform additional steps do get it going.
Automatic merge from submit-queue
Generate and store federation OpenAPI spec in source tree
A follow up of #33628 to also add federation spec to source tree.
Automatic merge from submit-queue
Add sandbox gc minage
Fixes https://github.com/kubernetes/kubernetes/issues/34272.
Fixes https://github.com/kubernetes/kubernetes/issues/33984.
This PR:
1) Change the `GetPodStatus` to get statuses of all containers in a pod instead of only containers belonging to existing sandboxes. This is because sandbox may be removed by GC or by users, kubelet should be able to deal with this case.
2) Change the CRI comment to clarify the timestamp unit (nanosecond).
2) Add MinAge for sandbox GC Policy.
@yujuhong @feiskyer @yifan-gu
/cc @kubernetes/sig-node
Kubernetes Submit Queue