Automatic merge from submit-queue
Fix race condition in updating attached volume between master and node
This PR tries to fix issue #29324. The cause of this issue is that a race
condition happens when marking volumes as attached for node status. This
PR tries to clean up the logic of when and where to mark volumes as
attached/detached. Basically the workflow as follows,
1. When volume is attached sucessfully, the volume and node info is
added into nodesToUpdateStatusFor to mark the volume as attached to the
node.
2. When detach request comes in, it will check whether it is safe to
detach now. If the check passes, remove the volume from volumesToReportAsAttached
to indicate the volume is no longer considered as attached now.
Afterwards, reconciler tries to update node status and trigger detach
operation. If any of these operation fails, the volume is added back to
the volumesToReportAsAttached list showing that it is still attached.
These steps should make sure that kubelet get the right (might be
outdated) information about which volume is attached or not. It also
garantees that if detach operation is pending, kubelet should not
trigger any mount operations.
This PR tries to fix issue #29324. This cause of this issue is a race
condition happens when marking volumes as attached for node status. This
PR tries to clean up the logic of when and where to mark volumes as
attached/detached. Basically the workflow as follows,
1. When volume is attached sucessfully, the volume and node info is
added into nodesToUpdateStatusFor to mark the volume as attached to the
node.
2. When detach request comes in, it will check whether it is safe to
detach now. If the check passes, remove the volume from volumesToReportAsAttached
to indicate the volume is no longer considered as attached now.
Afterwards, reconciler tries to update node status and trigger detach
operation. If any of these operation fails, the volume is added back to
the volumesToReportAsAttached list showing that it is still attached.
These steps should make sure that kubelet get the right (might be
outdated) information about which volume is attached or not. It also
garantees that if detach operation is pending, kubelet should not
trigger any mount operations.
Automatic merge from submit-queue
support storage class in Ceph RBD volume
replace WIP PR #30959, using PV annotation idea from @jsafrane
@kubernetes/sig-storage @johscheuer @elsonrodriguez
This allows users to diagnose what's wrong with recycler. Recycler pods are
started automatically with a cryptic name and they are deleted immediately
when they finish.
kubectl describe pods will show:
FirstSeen LastSeen Count From SubobjectPath Type Reason Message
--------- -------- ----- ---- ------------- -------- ------ -------
59m 59m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(5421800e-347b-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
53m 53m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(3c9809e5-347c-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
46m 46m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(250dd2a2-347d-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
40m 40m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(0d84ea33-347e-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
33m 33m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(f5fb63bf-347e-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
27m 27m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(de7128fd-347f-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
1h 3m 75 {persistentvolume-controller } Normal RecyclerPod Recycler pod: Successfully assigned recycler-for-nfs to 127.0.0.1
1h 3m 76 {persistentvolume-controller } Normal RecyclerPod Recycler pod: Pod was active on the node longer than specified deadline
1h 1m 12 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Error syncing pod, skipping: timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
20m 1m 4 {persistentvolume-controller } Warning RecyclerPod (events with common reason combined)
These steps were necessary:
- added event watcher to volume.RecycleVolumeByWatchingPodUntilCompletion
- pass all these events through volume plugins to volume controller
- rework volume.RecycleVolumeByWatchingPodUntilCompletion unit tests to a table
(too much copy-paste)
- fix all unit tests along the way
Automatic merge from submit-queue
Make @rootfs the assignee for various volumes
This, combined with the '/lgtm' capability of reviewers means you can approve
PRs. @rootfs - I assume you're OK with this?
Automatic merge from submit-queue
Post event message for volume attachment
This PR is to add event message when attaching volume fails to help
users to debug. For detach failure, may address in a different PR since
it requires more data structure change.
This PR is to add event message when attaching volume fails to help
users to debug. For detach failure, may address in a different PR since
it requires more data structure change.
Automatic merge from submit-queue
Implements Attacher Plugin Interface for vSphere
This PR does the following,
Fixes#29028 (vsphere volume should implement attacher interface): Implements Attacher Plugin Interface for vSphere.
See file:
pkg/volume/vsphere_volume/vsphere_volume.go. - Removed attach and detach calls from SetupAt and TearDownAt.
pkg/volume/vsphere_volume/attacher.go. - Implements Attacher & Detacher Plugin Interface for vSphere. (Ref :- GCE_PD & AWS attacher.go)
pkg/cloudproviders/provider/vsphere.go - Added DiskIsAttach method.
The vSphere plugin code needs clean up. (ex: The code for getting vSphere instance is repeated in file pkg/cloudprovider/providers/vsphere.go). I will fix this in next PR.
Automatic merge from submit-queue
Fix coding style
cc @pmorie
**What this PR does / why we need it**: Fixes case on a variable name, it's simple and adjust the code to the coding style.
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```NONE
```
Automatic merge from submit-queue
Add encryption to EBS dynamic provisioner
Resolves https://github.com/kubernetes/kubernetes/issues/30792
Adds encryption to the EBS cloud provider and provisioner.
Follow up to #29006 (all commits but the one in this PR will drop out).
@kubernetes/sig-storage
```release-note
```
The serviceAccountName is occasionally useful for clients running on
Kube that need to know who they are when talking to other components.
The nodeName is useful for PetSet or DaemonSet pods that need to make
calls back to the API to fetch info about their node.
Both fields are immutable, and cannot easily be retrieved in another
way.
Automatic merge from submit-queue
Add ismounted check in unmountpath function
This change is to fix PR #30930. The function should check if the
mountpath is still mounted or not. If it is not, it should continue with
removing the directory instead of returning error.
This change is for fixing PR #30930. The function should check if the
mountpath is still mounted or not. If it is not, it should continue with
removing the directory instead of returning error.
Automatic merge from submit-queue
Adds myself to the flocker volume plugin owners
I am happy to look after the flocker volume plugin and support @agonzalezro. Currently refactoring the volume plugin and adding dynamic provisioning features in #31005
Automatic merge from submit-queue
Add Events for operation_executor to show status of mounts, failed/successful to show in describe events
Fixes#27590
@saad-ali @pmorie @erinboyd
After talking with @pmorie last week about the above issue, I decided to poke around and see if I could remedy. The refactoring broke my previous UXP merged PR's that correctly showed failed mount errors in the describe events. However, Not sure I implemented correctly, but it tested out and seems to be working, let me know what I missed or if this is not the correct approach.
```
Events:
FirstSeen LastSeen Count From SubobjectPath Type Reason Message
--------- -------- ----- ---- ------------- -------- ------ -------
2m 2m 1 {default-scheduler } Normal Scheduled Successfully assigned nfs-bb-pod1 to 127.0.0.1
44s 44s 1 {kubelet 127.0.0.1} Warning FailedMount Unable to mount volumes for pod "nfs-bb-pod1_default(a94f64f1-37c9-11e6-9aa5-52540073d346)": timeout expired waiting for volumes to attach/mount for pod "nfs-bb-pod1"/"default". list of unattached/unmounted volumes=[nfsvol]
44s 44s 1 {kubelet 127.0.0.1} Warning FailedSync Error syncing pod, skipping: timeout expired waiting for volumes to attach/mount for pod "nfs-bb-pod1"/"default". list of unattached/unmounted volumes=[nfsvol]
38s 38s 1 {kubelet } Warning FailedMount Unable to mount volumes for pod "a94f64f1-37c9-11e6-9aa5-52540073d346": Mount failed: exit status 32
Mounting arguments: nfs1.rhs:/opt/data99 /var/lib/kubelet/pods/a94f64f1-37c9-11e6-9aa5-52540073d346/volumes/kubernetes.io~nfs/nfsvol nfs []
Output: mount.nfs: Connection timed out
Resolution hint: Check and make sure the NFS Server exists (ensure that correct IPAddress/Hostname was given) and is available/reachable.
Also make sure firewall ports are open on both client and NFS Server (2049 v4 and 2049, 20048 and 111 for v3).
Use commands telnet <nfs server> <port> and showmount <nfs server> to help test connectivity.
```
Automatic merge from submit-queue
Quobyte Volume plugin
@quofelix and myself developed a volume plugin for [Quobyte](http://www.quobyte.com) which is a software-defined storage solution. This PR allows Kubernetes users to mount a Quobyte Volume inside their containers over Kubernetes.
Here are some further informations about [Quobyte and Storage for containers](http://www.quobyte.com/containers)
Automatic merge from submit-queue
Implement dynamic provisioning (beta) of PersistentVolumes via StorageClass
Implemented according to PR #26908. There are several patches in this PR with one huge code regen inside.
* Please review the API changes (the first patch) carefully, sometimes I don't know what the code is doing...
* `PV.Spec.Class` and `PVC.Spec.Class` is not implemented, use annotation `volume.alpha.kubernetes.io/storage-class`
* See e2e test and integration test changes - Kubernetes won't provision a thing without explicit configuration of at least one `StorageClass` instance!
* Multiple provisioning volume plugins can coexist together, e.g. HostPath and AWS EBS. This is important for Gluster and RBD provisioners in #25026
* Contradicting the proposal, `claim.Selector` and `volume.alpha.kubernetes.io/storage-class` annotation are **not** mutually exclusive. They're both used for matching existing PVs. However, only `volume.alpha.kubernetes.io/storage-class` is used for provisioning, configuration of provisioning with `Selector` is left for (near) future.
* Documentation is missing. Can please someone write some while I am out?
For now, AWS volume plugin accepts classes with these parameters:
```
kind: StorageClass
metadata:
name: slow
provisionerType: kubernetes.io/aws-ebs
provisionerParameters:
type: io1
zone: us-east-1d
iopsPerGB: 10
```
* parameters are case-insensitive
* `type`: `io1`, `gp2`, `sc1`, `st1`. See AWS docs for details
* `iopsPerGB`: only for `io1` volumes. I/O operations per second per GiB. AWS volume plugin multiplies this with size of requested volume to compute IOPS of the volume and caps it at 20 000 IOPS (maximum supported by AWS, see AWS docs).
* of course, the plugin will use some defaults when a parameter is omitted in a `StorageClass` instance (`gp2` in the same zone as in 1.3).
GCE:
```
apiVersion: extensions/v1beta1
kind: StorageClass
metadata:
name: slow
provisionerType: kubernetes.io/gce-pd
provisionerParameters:
type: pd-standard
zone: us-central1-a
```
* `type`: `pd-standard` or `pd-ssd`
* `zone`: GCE zone
* of course, the plugin will use some defaults when a parameter is omitted in a `StorageClass` instance (SSD in the same zone as in 1.3 ?).
No OpenStack/Cinder yet
@kubernetes/sig-storage
Automatic merge from submit-queue
Allow setting permission mode bits on secrets, configmaps and downwardAPI files
cc @thockin @pmorie
Here is the first round to implement: https://github.com/kubernetes/kubernetes/pull/28733.
I made two commits: one with the actual change and the other with the auto-generated code. I think it's easier to review this way, but let me know if you prefer in some other way.
I haven't written any tests yet, I wanted to have a first glance and not write them till this (and the API) are more close to the "LGTM" :)
There are some things:
* I'm not sure where to do the "AND 0777". I'll try to look better in the code base, but suggestions are always welcome :)
* The write permission on group and others is not set when you do an `ls -l` on the running container. It does work with write permissions to the owner. Debugging seems to show that is something happening after this is correctly set on creation. Will look closer.
* The default permission (when the new fields are not specified) are the same that on kubernetes v1.3
* I do realize there are conflicts with master, but I think this is good enough to have a look. The conflicts is with the autog-enerated code, so the actual code is actually the same (and it takes like ~30 minutes to generate it here)
* I didn't generate the docs (`generated-docs` and `generated-swagger-docs` from `hack/update-all.sh`) because my machine runs out of mem. So that's why it isn't in this first PR, will try to investigate and see why it happens.
Other than that, this works fine here with some silly scripts I did to create a secret&configmap&downwardAPI, a pod and check the file permissions. Tested the "defaultMode" and "mode" for all. But of course, will write tests once this is looking fine :)
Thanks a lot again!
Rodrigo
This implements the proposal in:
docs/proposals/secret-configmap-downwarapi-file-mode.md
Fixes: #28317.
The mounttest image is updated so it returns the permissions of the linked file
and not the symlink itself.
Automatic merge from submit-queue
Fix default resource limits (node allocatable) for downward api volumes and env vars
@kubernetes/rh-cluster-infra @pmorie @derekwaynecarr
Automatic merge from submit-queue
Add volume reconstruct/cleanup logic in kubelet volume manager
Currently kubelet volume management works on the concept of desired
and actual world of states. The volume manager periodically compares the
two worlds and perform volume mount/unmount and/or attach/detach
operations. When kubelet restarts, the cache of those two worlds are
gone. Although desired world can be recovered through apiserver, actual
world can not be recovered which may cause some volumes cannot be cleaned
up if their information is deleted by apiserver. This change adds the
reconstruction of the actual world by reading the pod directories from
disk. The reconstructed volume information is added to both desired
world and actual world if it cannot be found in either world. The rest
logic would be as same as before, desired world populator may clean up
the volume entry if it is no longer in apiserver, and then volume
manager should invoke unmount to clean it up.
Fixes https://github.com/kubernetes/kubernetes/issues/27653
Currently kubelet volume management works on the concept of desired
and actual world of states. The volume manager periodically compares the
two worlds and perform volume mount/unmount and/or attach/detach
operations. When kubelet restarts, the cache of those two worlds are
gone. Although desired world can be recovered through apiserver, actual
world can not be recovered which may cause some volumes cannot be cleaned
up if their information is deleted by apiserver. This change adds the
reconstruction of the actual world by reading the pod directories from
disk. The reconstructed volume information is added to both desired
world and actual world if it cannot be found in either world. The rest
logic would be as same as before, desired world populator may clean up
the volume entry if it is no longer in apiserver, and then volume
manager should invoke unmount to clean it up.
Automatic merge from submit-queue
Verify volume.GetPath() never returns ""
Add a new helper method volume.GetPath(Mounter) instead of calling
the GetPath() of the Mounter directly. Check if GetPath() is returning
a "" and convert that into an error.
Fixes#23163
Automatic merge from submit-queue
Run goimport for the whole repo
While removing GOMAXPROC and running goimports, I noticed quite a lot of other files also needed a goimport format. Didn't commit `*.generated.go`, `*.deepcopy.go` or files in `vendor`
This is more for testing if it builds.
The only strange thing here is the gopkg.in/gcfg.v1 => github.com/scalingdata/gcfg replace.
cc @jfrazelle @thockin
Add a new helper method volume.GetPath(Mounter) instead of calling
the GetPath() of the Mounter directly. Check if GetPath() is returning
a "" and convert that into an error. At this point, we only have
information about the type of the Mounter, so let's log that if
there is a problem
Fixes#23163
Automatic merge from submit-queue
pkg/various: plug leaky time.New{Timer,Ticker}s
According to the documentation for Go package time, `time.Ticker` and
`time.Timer` are uncollectable by garbage collector finalizers. They
leak until otherwise stopped. This commit ensures that all remaining
instances are stopped upon departure from their relative scopes.
Similar efforts were incrementally done in #29439 and #29114.
```release-note
* pkg/various: plugged various time.Ticker and time.Timer leaks.
```
Automatic merge from submit-queue
Check iscsi iface file for transport name
When checking for tcp vs hardware transports, check actual iscsi iface file to see if we are using tcp as a transport, rather than relying on just the transport name of 'default'.
This fixes the open-iscsi software iscsi initiator for non-default interfaces.
fixes#27131
Automatic merge from submit-queue
pkg/util/goroutinemap: apply idiomatic Go cleanups
Package goroutinemap can be structurally simplified to be more
idiomatic, concise, and free of error potential. No structural changes
are made.
It is unconventional declare `sync.Mutex` directly as a pointerized
field in a parent structure. The `sync.Mutex` operates on pointer
receivers of itself; and by relying on that, the types that contain
those fields can be safely constructed using
https://golang.org/ref/spec#The_zero_value semantic.
The duration constants are already of type `time.Duration`, so
re-declaring that is redundant.
/CC: @saad-ali
Automatic merge from submit-queue
Fix mount collision timeout issue
Short- or medium-term workaround for #29555. The root issue being fixed here is that the recent attach/detach work in the kubelet uses a unique volume name as a key that tracks the work that has to be done for each volume in a pod to attach/mount/umount/detach. However, the non-attachable volume plugins do not report unique names for themselves, which causes collisions when a single secret or configmap is mounted multiple times in a pod.
This is still a WIP -- I need to add a couple E2E tests that ensure that tests break in the future if there is a regression -- but posting for early review.
cc @kubernetes/sig-storage
Ultimately, I would like to refine this a bit further. A couple things I would like to change:
1. `GetUniqueVolumeName` should be a property ONLY of attachable volumes
2. I would like to see the kubelet apparatus for attach/mount/umount/detach handle non-attachable volumes specifically to avoid things like the `WaitForControllerAttach` call that has to be done for those volume types now
Automatic merge from submit-queue
volume/flocker: plug time.Ticker resource leak
This commit ensures that `flockerMounter.updateDatasetPrimary` does not leak
running `time.Ticker` instances. Upon termination of the consuming routine, we
stop the tickers.
```release-note
* flockerMounter.updateDatasetPrimary no longer leaks running time.Ticker instances.
Upon termination of the consuming routine, we stop the tickers.
```
For non-attachable volumes, do not call GetVolumeName on the plugin and instead
generate a unique name based on the identity of the pod and the name of the volume
within the pod.
This fixes race conditions in configmap, secret, downwardapi & git_repo
volume plugins.
wrappedVolumeSpec vars used by volume mounters and unmounters contained
a pointer to api.Volume structs which were being patched by
NewWrapperMounter/NewWrapperUnmounter, causing race condition during
volume mounts.
Package goroutinemap can be structurally simplified to be more
idiomatic, concise, and free of error potential. No structural changes
are made.
It is unconventional declare `sync.Mutex` directly as a pointerized
field in a parent structure. The `sync.Mutex` operates on pointer
receivers of itself; and by relying on that, the types that contain
those fields can be safely constructed using
https://golang.org/ref/spec#The_zero_value.
The duration constants are already of type `time.Duration`, so
re-declaring that is redundant.
According to the documentation for Go package time, `time.Ticker` and
`time.Timer` are uncollectable by garbage collector finalizers. They
leak until otherwise stopped. This commit ensures that all remaining
instances are stopped upon departure from their relative scopes.
Automatic merge from submit-queue
add enhanced volume and mount logging for block devices
Fixes#24568
Adding better logging and debugging for block device volumes and the shared SafeFormatAndMount (aws, gce, flex, rbd, cinder, etc...)
Allow mount volume operations to run in parallel for non-attachable
volume plugins.
Allow unmount volume operations to run in parallel for all volume
plugins.
This commit ensures that `flockerMounter.updateDatasetPrimary` does not leak
running `time.Ticker` instances. Upon termination of the consuming
routine, we stop the tickers.
This is to base the name on the volume not just on the
source configMap. If you have 2 volumes that both have the same
configMap as a source, the volume is see as being in the attached
state (it's state is looked up based on GetVolumeName()).
See bug #28502
Automatic merge from submit-queue
Track object modifications in fake clientset
Fake clientset is used by unit tests extensively but it has some
shortcomings:
- no filtering on namespace and name: tests that want to test objects in
multiple namespaces end up getting all objects from this clientset,
as it doesn't perform any filtering based on name and namespace;
- updates and deletes don't modify the clientset state, so some tests
can get unexpected results if they modify/delete objects using the
clientset;
- it's possible to insert multiple objects with the same
kind/name/namespace, this leads to confusing behavior, as retrieval is
based on the insertion order, but anchors on the last added object as
long as no more objects are added.
This change changes core.ObjectRetriever implementation to track object
adds, updates and deletes.
Some unit tests were depending on the previous (and somewhat incorrect)
behavior. These are fixed in the following few commits.
Ensure that kublet marks VolumeInUse before checking if it is Attached.
Also ensures that the attach/detach controller always fetches a fresh
copy of the node object before detach (instead ofKubelet relying on node
informer cache).
Fake clientset no longer needs to be prepopulated with records: keeping
them in leads to the name conflict on creates. Also, since fake
clientset now respects namespaces, we need to correctly populate them.
Automatic merge from submit-queue
Adding SCSI controller type filter for vSphere disk attach
Hot plug of disks to a SCSI controller of type lsilogic doesn't work as expected. When a device is detached from the controller, it fails to remove the device from the /dev path which makes the subsequent attaches to the node to fail. With scsi controller types lsilogic-sas or paravirtual this seems to work well. This patch filters the existing controller for these types, and if it doesn't find one, it creates a new controller for disk attach.
This PR is dependent on https://github.com/kubernetes/kubernetes/pull/26658 (1st commit) also targeting this for 1.3
Automatic merge from submit-queue
AWS/GCE: Spread PetSet volume creation across zones, create GCE volumes in non-master zones
Long term we plan on integrating this into the scheduler, but in the
short term we use the volume name to place it onto a zone.
We hash the volume name so we don't bias to the first few zones.
If the volume name "looks like" a PetSet volume name (ending with
-<number>) then we use the number as an offset. In that case we hash
the base name.
Lots of comments describing the heuristics, how it fits together and the
limitations.
In particular, we can't guarantee correct volume placement if the set of
zones is changing between allocating volumes.
Modify attach/detach controller to keep track of volumes to report
attached in Node VolumeToAttach status.
Modify kubelet volume manager to wait for volume to show up in Node
VolumeToAttach status.
Implement exponential backoff for errors in volume manager and attach
detach controller
Hot attach of disk to a scsi controller will work only if the
controller type is lsilogic-sas or paravirtual.This patch filters
the existing controller for these types, if it doesn't find one it
creates a new scsi controller.
Automatic merge from submit-queue
Remove an empty line being output when exposing annotations and labels via downward api volume
The issue is that formatMap function (for annotations and labels) in pkg/fieldpath/fieldpath.go appends a "\n" after each key value pair which is correct for all pairs except the last pair because then a complete string is returned with a "\n" in the end. It is inconsistent with other strings (metadata.name, namespace and resources) being returned as they dont have "\n" in the end. These returned strings are processed by sortLines function in pkg/volume/downwardapi/downwardapi.go and the function finally appends "\n" to each string, but incorrectly outputs an empty line if there is an already "\n" in the end with the input string. To illustrate:
The sortLines works as follows: lets say the input string is : "a\nb\nc\n".
1. It splits them as "a", "b", "c", "" (note empty string in the end).
2. it sort them: "", "a", b", "c"
3. And then it appends "\n" again to each string: "\n", "a\n" ,"b\n", "c\n"
So we can see that it is erroneously creating an empty string in the beginning when the input string to sortLines has "\n" in the end. As I said above, it is not an issue with metadata.name, namespace and resources as their input strings are without \n" in the end.
So now, the output in the downward api volume, (using the example in http://kubernetes.io/docs/user-guide/downward-api/):
```
# cat /etc/annotations
zone="us-est-coast"
cluster="test-cluster1"
rack="rack-22"
```
After this patch, the output will be correct and without the erroneous empty line in the beginning.
I could think other ways to solve this but I found the way in this patch with minimal code changes.
@kubernetes/rh-cluster-infra
We had a long-lasting bug which prevented creation of volumes in
non-master zones, because the cloudprovider in the volume label
admission controller is not initialized with the multizone setting
(issue #27656).
This implements a simple workaround: if the volume is created with the
failure-domain zone label, we look for the volume in that zone. This is
more efficient, avoids introducing a new semantic, and allows users (and
the dynamic provisioner) to create volumes in non-master zones.
Fixes#27657
Long term we plan on integrating this into the scheduler, but in the
short term we use the volume name to place it onto a zone.
We hash the volume name so we don't bias to the first few zones.
If the volume name "looks like" a PetSet volume name (ending with
-<number>) then we use the number as an offset. In that case we hash
the base name.
Fixes#27256
This commit adds a new volume manager in kubelet that synchronizes
volume mount/unmount (and attach/detach, if attach/detach controller
is not enabled).
This eliminates the race conditions between the pod creation loop
and the orphaned volumes loops. It also removes the unmount/detach
from the `syncPod()` path so volume clean up never blocks the
`syncPod` loop.
- replaces probeVolume with scsiHostRescan to scan hot attached disks
- fixes substring match of UUID returned from AttachDisk
- changes DetachDisk to take volumePath argument instead of diskID
- fixes delayed failure at mount rather than attach disk
- removes cloning of virtual disk in AttachDisk
Automatic merge from submit-queue
GCE attach tests
Add basic tests for GCE attacher.
Looking at the code, it would deserve some refactoring as suggested in #25888, so mounting is not tested at all.
Automatic merge from submit-queue
Fix GCE attacher/detacher to ignore return value of failed calls.
The plugin should ignore any return value if err is set. Found when writing unit tests in #26615 - my dummy `DiskIsAttached` returned `false, errors.New('fake error')` and the volume was **not** detached although the log message `"Error checking if PD (%q) is already attached to current node (%q). Will continue and try detach anyway."` suggested otherwise
@saad-ali, PTAL
@kubernetes/sig-storage
This PR contains Kubelet changes to enable attach/detach controller control.
* It introduces a new "enable-controller-attach-detach" kubelet flag to
enable control by controller. Default enabled.
* It removes all references "SafeToDetach" annoation from controller.
* It adds the new VolumesInUse field to the Node Status API object.
* It modifies the controller to use VolumesInUse instead of SafeToDetach
annotation to gate detachment.
* There is a bug in node-problem-detector that causes VolumesInUse to
get reset every 30 seconds. Issue https://github.com/kubernetes/node-problem-detector/issues/9
opened to fix that.
Automatic merge from submit-queue
read gluster log to surface glusterfs plugin errors properly in describe events
glusterfs.go does not properly expose errors as all mount errors go to a log file, I propose we read the log file to expose the errors without asking the users to 'go look at this log'
This PR does the following:
1. adds a gluster option for log-level=ERROR to remove all noise from log file
2. change log file name and path based on PV + Pod name - so specific per PV and Pod
3. create a utility to read the last two lines of the log file when failure occurs
old behavior:
```
13s 13s 1 {kubelet 127.0.0.1} Warning FailedMount Unable to mount volumes for pod "bb-gluster-pod2_default(34b18c6b-070d-11e6-8e95-52540092b5fb)": glusterfs: mount failed: Mount failed: exit status 1
Mounting arguments: 192.168.234.147:myVol2 /var/lib/kubelet/pods/34b18c6b-070d-11e6-8e95-52540092b5fb/volumes/kubernetes.io~glusterfs/pv-gluster glusterfs [log-file=/var/lib/kubelet/plugins/kubernetes.io/glusterfs/pv-gluster/glusterfs.log]
Output: Mount failed. Please check the log file for more details.
```
improved behavior: (updated after suggestions from community)
```
34m 34m 1 {kubelet 127.0.0.1} Warning FailedMount Unable to mount volumes for pod "bb-multi-pod1_default(e7d7f790-0d4b-11e6-a275-52540092b5fb)": glusterfs: mount failed: Mount failed: exit status 1
Mounting arguments: 192.168.123.222:myVol2 /var/lib/kubelet/pods/e7d7f790-0d4b-11e6-a275-52540092b5fb/volumes/kubernetes.io~glusterfs/pv-gluster2 glusterfs [log-level=ERROR log-file=/var/lib/kubelet/plugins/kubernetes.io/glusterfs/pv-gluster2/bb-multi-pod1-glusterfs.log]
Output: Mount failed. Please check the log file for more details.
the following error information was pulled from the log to help resolve this issue:
[2016-04-28 14:21:29.109697] E [socket.c:2332:socket_connect_finish] 0-glusterfs: connection to 192.168.123.222:24007 failed (Connection timed out)
[2016-04-28 14:21:29.109767] E [glusterfsd-mgmt.c:1819:mgmt_rpc_notify] 0-glusterfsd-mgmt: failed to connect with remote-host: 192.168.123.222 (Transport endpoint is not connected)
```
also this PR is alternate approach to : #24624
Automatic merge from submit-queue
Attach Detach Controller Business Logic
This PR adds the meat of the attach/detach controller proposed in #20262.
The PR splits the in-memory cache into a desired and actual state of the world.
Split controller cache into actual and desired state of world.
Controller will only operate on volumes scheduled to nodes that
have the "volumes.kubernetes.io/controller-managed-attach" annotation.
Automatic merge from submit-queue
vSphere Volume Plugin Implementation
This PR implements vSphere Volume plugin support in Kubernetes (ref. issue #23932).
Automatic merge from submit-queue
Add support for PersistentVolumeClaim in Attacher/Detacher interface
The attach detach interface does not support volumes which are referenced through PVCs. This PR adds that support
Automatic merge from submit-queue
Extend secrets volumes with path control
As per [1] this PR extends secrets mapped into volume with:
* key-to-path mapping the same way as is for configmap. E.g.
```
{
"apiVersion": "v1",
"kind": "Pod",
"metadata": {
"name": "mypod",
"namespace": "default"
},
"spec": {
"containers": [{
"name": "mypod",
"image": "redis",
"volumeMounts": [{
"name": "foo",
"mountPath": "/etc/foo",
"readOnly": true
}]
}],
"volumes": [{
"name": "foo",
"secret": {
"secretName": "mysecret",
"items": [{
"key": "username",
"path": "my-username"
}]
}
}]
}
}
```
Here the ``spec.volumes[0].secret.items`` added changing original target ``/etc/foo/username`` to ``/etc/foo/my-username``.
* secondly, refactoring ``pkg/volumes/secrets/secrets.go`` volume plugin to use ``AtomicWritter`` to project a secret into file.
[1] https://github.com/kubernetes/kubernetes/blob/master/docs/design/configmap.md#changes-to-secret
Automatic merge from submit-queue
volume recycler: Don't start a new recycler pod if one already exists.
Recycling is a long duration process and when the recycler controller is restarted in the meantime, it should not start a new recycler pod if there is one already running.
This means that the recycler pod must have deterministic name based on name of the recycled PV, we then get name conflicts when creating the pod.
Two things need to be changed:
- recycler controller and recycler plugins must pass the PV.Name to place, where the pod is created. This is most of the patch and it should be pretty straightforward.
- create recycler pod with deterministic name and check "already exists" error.
When at it, remove useless 'resourceVersion' argument and make log messages starting with lowercase.
There is an unit test to check the behavior + there is an e2e test that checks that regular recycling is not broken (it does not try to run two recycler pods in parallel as the recycler is single-threaded now).
Recycling is a long duration process and when the recycler controller is
restarted in the meantime, it should not start a new recycler pod if there is
one already running.
This means that the recycler pod must have deterministic name based on name
of the recycled PV, we then get name conflicts when creating the pod.
Two things need to be changed:
- recycler controller and recycler plugins must pass the PV.Name to place,
where the pod is created.
- create recycler pod with deterministic name and check "already exists" error.
When at it, remove useless 'resourceVersion' argument and make log messages
starting with lowercase.
Automatic merge from submit-queue
Refactor persistent volume controller
Here is complete persistent controller as designed in https://github.com/pmorie/pv-haxxz/blob/master/controller.go
It's feature complete and compatible with current binder/recycler/provisioner. No new features, it *should* be much more stable and predictable.
Testing
--
The unit test framework is quite complicated, still it was necessary to reach reasonable coverage (78% in `persistentvolume_controller.go`). The untested part are error cases, which are quite hard to test in reasonable way - sure, I can inject a VersionConflictError on any object update and check the error bubbles up to appropriate places, but the real test would be to run `syncClaim`/`syncVolume` again and check it recovers appropriately from the error in the next periodic sync. That's the hard part.
Organization
---
The PR starts with `rm -rf kubernetes/pkg/controller/persistentvolume`. I find it easier to read when I see only the new controller without old pieces scattered around.
[`types.go` from the old controller is reused to speed up matching a bit, the code looks solid and has 95% unit test coverage].
I tried to split the PR into smaller patches, let me know what you think.
~~TODO~~
--
* ~~Missing: provisioning, recycling~~.
* ~~Fix integration tests~~
* ~~Fix e2e tests~~
@kubernetes/sig-storage
<!-- Reviewable:start -->
---
This change is [<img src="http://reviewable.k8s.io/review_button.svg" height="35" align="absmiddle" alt="Reviewable"/>](http://reviewable.k8s.io/reviews/kubernetes/kubernetes/24331)
<!-- Reviewable:end -->
Fixes#15632
The key to path mapping allows pod to specify different name (thus location) of each secret.
At the same time refactor the volume plugin to use AtomicWritter to project secrets to files in a volume.
Update e2e Secrets test, the secret file permission has changed from 0444 to 0644
Remove TestPluginIdempotent as the AtomicWritter is responsible for secret creation
Automatic merge from submit-queue
Make IsQualifiedName return error strings
Part of the larger validation PR, broken out for easier review and merge.
@lavalamp FYI, but I know you're swamped, too.
Automatic merge from submit-queue
Use local disk for ConfigMap volume instead of tmpfs
So that ConfigMap volumes are counted against pod's storage quota.
@kubernetes/sig-node
cc @derekwaynecarr @vishh
Automatic merge from submit-queue
Abstract node side functionality of attachable plugins
- Create PhysicalAttacher interface to abstract MountDevice and
WaitForAttach.
- Create PhysicalDetacher interface to abstract WaitForDetach and
UnmountDevice.
- Expand unit tests to check that Attach, Detach, WaitForAttach,
WaitForDetach, MountDevice, and UnmountDevice get call where
appropriet.
Physical{Attacher,Detacher} are working titles suggestions welcome. Some other thoughts:
- NodeSideAttacher or NodeAttacher.
- AttachWatcher
- Call this Attacher and call the Current Attacher CloudAttacher.
- DeviceMounter (although there are way too many things called Mounter right now :/)
This is to address: https://github.com/kubernetes/kubernetes/pull/21709#issuecomment-192035382
@saad-ali
Automatic merge from submit-queue
Automatically Add Supplemental Groups from Volumes to Pods
This adds support for a "GID" annotation that one can add to their PVs. When this annotation is seen the kubelet automatically adds the given GID to the list of supplemental groups for the pod to which the PV is attached. This allows admins to create volumes and suggest a GID to use to access the volume. This is needed for volumes which do not support ownership management such as NFS.
@markturansky PTAL
- Expand Attacher/Detacher interfaces to break up work more
explicitly.
- Add arguments to all functions to avoid having implementers store
the data needed for operations.
- Expand unit tests to check that Attach, Detach, WaitForAttach,
WaitForDetach, MountDevice, and UnmountDevice get call where
appropriet.
Automatic merge from submit-queue
Rackspace improvements (OpenStack Cinder)
This adds PV support via Cinder on Rackspace clusters. Rackspace Cloud Block Storage is pretty much vanilla OpenStack Cinder, so there is no need for a separate Volume Plugin. Instead I refactored the Cinder/OpenStack interaction a bit (by introducing a CinderProvider Interface and moving the device path detection logic to the OpenStack part).
Right now this is limited to `AttachDisk` and `DetachDisk`. Creation and deletion of Block Storage is not in scope of this PR.
Also the `ExternalID` and `InstanceID` cloud provider methods have been implemented for Rackspace.
Automatic merge from submit-queue
Add mpio support for iscsi
This allows the iscsi volume to check if a iscsi device belongs to a mpio device
If it does belong to the device then we make sure we mount the mpio device instead of
the raw device.
The code is based on the current FibreChannel volume support for mpio
example
/dev/disk/by-path/iqn-example.com.2999 -> /dev/sde
Then we check
/sys/block/[dm-X]/slaves/xx
until we find the [dm-X] containing /dev/sde and mount it
Additional work that can be done in future
1. Add multiple portal support to iscsi
2. Move the FibreChannel volume provider to use the code that has been extracted
If it does belong to the device then we make sure we mount the mpio device instead of
the raw device.
Heuristics
Login into /dev/disk/by-path/iqn-example.com.2999 -> /dev/sde
Check if sde existsin in /sys/block/[dm-X]/slaves/xx
If it does mount /dev/[dm-x] which will look like /dev/mapper/mpiodevicename in mount
examples/iscsi has more details
Automatic merge from submit-queue
Additional go vet fixes
Mostly:
- pass lock by value
- bad syntax for struct tag value
- example functions not formatted properly
AWS has soft support limit for 40 attached EBS devices. Assuming there is just
one root device, use the rest for persistent volumes.
The devices will have name /dev/xvdba - /dev/xvdcm, leaving /dev/sda - /dev/sdz
to the system.
Also, add better error handling and propagate error
"Too many EBS volumes attached to node XYZ" to a pod.
In podSecurityPolicy:
1. Rename .seLinuxContext to .seLinux
2. Rename .seLinux.type to .seLinux.rule
3. Rename .runAsUser.type to .runAsUser.rule
4. Rename .seLinux.SELinuxOptions
1,2,3 as suggested by thockin in #22159.
I added 3 for consistency with 2.
Similar to #11543, the local hostname is not guaranteed to be the node
name, as the AWS cloud provider looks up node name using
`private-dns-name`. This value can be different such as when using a
private hosted zone.
The previous code uses GetHostName(), which fails in this case. Instead,
pass in an empty string so the aws cloud provider will use the cached
self instance to find the instance id.
Authors: @balooo, @dogan-sky, @jsravn
This is a first-aid bandage to let admission controller ignore persistent
volumes that are being provisioned right now and thus may not exist in
external cloud infrastructure yet.
Volume names have now format <cluster-name>-dynamic-<pv-name>.
pv-name is guaranteed to be unique in Kubernetes cluster, adding
<cluster-name> ensures we don't conflict with any running cluster
in the cloud project (kube-controller-manager --cluster-name=XXX).
'kubernetes' is the default cluster name.
* Metrics will not be expose until they are hooked up to a handler
* Metrics are not cached and expose a dos vector, this must be fixed before release or the stats should not be exposed through an api endpoint
We are (sadly) using a copy-and-paste of the GCE PD code for AWS EBS.
This code hasn't been updated in a while, and it seems that the GCE code
has some code to make volume mounting more robust that we should copy.
Add a mutex to guard SetUpAt() and TearDownAt() calls - they should not
run in parallel. There is a race in these calls when there are two pods
using the same volume, one of them is dying and the other one starting.
TearDownAt() checks that a volume is not needed by any pods and detaches the
volume. It does so by counting how many times is the volume mounted
(GetMountRefs() call below).
When SetUpAt() of the starting pod already attached the volume and did not mount
it yet, TearDownAt() of the dying pod will detach it - GetMountRefs() does not
count with this volume.
These two threads run in parallel:
dying pod.TearDownAt("myVolume") starting pod.SetUpAt("myVolume")
| |
| AttachDisk("myVolume")
refs, err := mount.GetMountRefs() |
Unmount("myDir") |
if refs == 1 { |
| | Mount("myVolume", "myDir")
| | |
| DetachDisk("myVolume") |
| start containers - OOPS! The volume is detached!
|
finish the pod cleanup
Also, add some logs to cinder plugin for easier debugging in the future, add
a test and update the fake mounter to know about bind mounts.
GCE disks don't have tags, we must encode the tags into Description field.
It's encoded as JSON, which is both human and machine readable:
description: '{"kubernetes.io/created-for/pv/name":"pv-gce-oxwts","kubernetes.io/created-for/pvc/name":"myclaim","kubernetes.io/created-for/pvc/namespace":"default"}'
We adapt the existing code to work across all zones in a region.
We require a feature-flag to enable Ubernetes-Lite
Reasons:
* There are some behavioural changes if users create volumes with
the same name in two zones.
* We don't want to make one API call per zone if we're not running
Ubernetes-Lite.
* Ubernetes-Lite is still experimental.
There isn't a parallel flag implemented for AWS, because at the moment
there would be no behaviour changes from this.
This synchronizes Cinder with AWS EBS code, where we already tag volumes with
claim.Namespace and claim.Name (and pv.Name, as suggested in separate PR).
- Add volume.MetricsProvider function to Volume interface.
- Add volume.MetricsDu for providing metrics via executing "du".
- Add volulme.MetricsNil for unsupported Volumes.
This enables use of software or hardware transports viz. be2iscsi,
bnx2i, cxgb3i, cxgb4i, qla4xx, iser and ocs. The default transport
(tcp) happens to be called "default".
Use of non-default transports changes the disk path to the following format:
/dev/disk/by-path/pci-<pci_id>-ip-<portal>-iscsi-<iqn>-lun-<lun_id>
Code comments currently claim the default iscsi mount path as
kubernetes.io/pod/iscsi/<portal>-iqn-<iqn>-lun-<id>, however actual
path being used is
kubernetes.io/iscsi/iscsi/<portal>-iqn-<iqn>-lun-<id>
This leads to ultimate path being similar to this :
kubernetes.io/iscsi/iscsi/...iqn-iqn...-lun-N
Both iscsi and iqn are repated twice for no reason, since "iqn" is
required by spec to be part of an iqn. This is also wrong on
multiple leves as actual allowed naming formats are :
iqn.2001-04.com.example:storage:diskarrays-sn-a8675309
eui.02004567A425678D
(RFC 3720 3.2.6.3)
and in the second case "iqn-eui" in the path would be misleading.
Change this to a more reasonable path of
kubernetes.io/iscsi/<portal>-<iqn>-lun-<id>
which also aligns up with how the /dev/by-path and sysfs entries
are created for iscsi devices on linux
* -- *
Update iSCSI README and sample json file
There seems to have been quite a skew in recent updates to these
files adding in wrong info or info that no longer lines up the
sample config with the README.
Fixed the following issues :
* Fix discrepancy in samples json using initiator iqn from previous
linked example as target iqn (which was just wrong)
* Generate sample output and README from the same json config provided.
* Remove recommendation to edit initiator name, this is not required
(open-iscsi warns against editing this manually and provides a utility
for the same)
* Update docker inspect command to one that works.
* Use separate LUNs for separate mount points instead of re-using.
remount was originally needed to ensure rw/ro is set correctly. There is no such need since mount is using exec interface
Signed-off-by: Huamin Chen <hchen@redhat.com>
Flocker [1] is an open-source container data volume manager for
Dockerized applications.
This PR adds a volume plugin for Flocker.
The plugin interfaces the Flocker Control Service REST API [2] to
attachment attach the volume to the pod.
Each kubelet host should run Flocker agents (Container Agent and Dataset
Agent).
The kubelet will also require environment variables that contain the
host and port of the Flocker Control Service. (see Flocker architecture
[3] for more).
- `FLOCKER_CONTROL_SERVICE_HOST`
- `FLOCKER_CONTROL_SERVICE_PORT`
The contribution introduces a new 'flocker' volume type to the API with
fields:
- `datasetName`: which indicates the name of the dataset in Flocker
added to metadata;
- `size`: a human-readable number that indicates the maximum size of the
requested dataset.
Full documentation can be found docs/user-guide/volumes.md and examples
can be found at the examples/ folder
[1] https://clusterhq.com/flocker/introduction/
[2] https://docs.clusterhq.com/en/1.3.1/reference/api.html
[3] https://docs.clusterhq.com/en/1.3.1/concepts/architecture.html
rbd: if rbd image is not formatted, format it to the designated filesystem type
rbd: update example README.md and include instructions to get base64 encoded Ceph secret
if rbd fails to lock image, unmap the image before exiting
Signed-off-by: Huamin Chen <hchen@redhat.com>
GlusterFS by default uses a log file based on the mountpoint path munged into a
file, i.e. `/mnt/foo/bar` becomes `/var/log/glusterfs/mnt-foo-bar.log`.
On certain Kubernetes environments this can result in a log file that exceeds
the 255 character length most filesystems impose on filenames causing the mount
to fail. Instead, use the `log-file` mount option to place the log file under
the kubelet plugin directory with a filename of our choosing keeping it fairly
persistent in the case of troubleshooting.
A lot of packages use StringSet, but they don't use anything else from
the util package. Moving StringSet into another package will shrink
their dependency trees significantly.
This code was originally added because the first mount call did not
respect the ro option. This no longer seems to be the cause so there
is no need to use remount.
Signed-off-by: Sami Wagiaalla <swagiaal@redhat.com>
The GCE PD plugin uses safe_format_and_mount found on standard GCE images:
https://github.com/GoogleCloudPlatform/compute-image-packages/blob/master/google-startup-scripts/usr/share/google/safe_format_and_mount
On custom images where this is not available pods fail to format and
mount GCE PDs. This patch uses linux utilities in a similar way to the
safe_format_and_mount script to format and mount the GCE PD and AWS EBC
devices. That is first attempt a mount. If mount fails try to use file to
investigate the device. If 'file' fails to get any information about
the device and simply returns "data" then assume the device is not
formatted and format it and attempt to mount it again.
Signed-off-by: Sami Wagiaalla <swagiaal@redhat.com>
IsLikelyNotMountPoint determines if a directory is not a mountpoint.
It is fast but not necessarily ALWAYS correct. If the path is in fact
a bind mount from one part of a mount to another it will not be detected.
mkdir /tmp/a /tmp/b; mount --bin /tmp/a /tmp/b; IsLikelyNotMountPoint("/tmp/b")
will return true. When in fact /tmp/b is a mount point. So this patch
renames the function and switches it from a positive to a negative (I
could think of a good positive name). This should make future users of
this function aware that it isn't quite perfect, but probably good
enough.
Angus Salkeld
