The image prepulling pod calls docker directly to pull images. If the pod
hasn't finished before running the resource usage tracking test, there'd be a
cpu spike in docker. We'd rather wait and fail if this is the case, before
running the test.
Automatic merge from submit-queue
GCI/Trusty: support the Docker registry mirror
@roberthbailey @zmerlynn please review it.
cc/ @fabioy @dchen1107 @kubernetes/goog-image FYI.
cc/ @ojarjur it is very straightforward to add support for GCI, which is pretty much like the change to ContainerVM's configure-vm.sh in your original PR #25841.
Automatic merge from submit-queue
GCI: correct the fix in #26363
This PR is mainly for correcting the fix to 'find' command in #26363. I added "-maxdepth 1" in an earlier change, and #26363 tried to fix it by changing the search path. This is potentially incorrect, when yaml files are in more than one layer deep. The real fix should be removing the "-maxdepth 1" flag from 'find' command. This PR also updates two minor places in the file configure-helper.sh introduced by two previous PR #26413 and #26048.
@roberthbailey @wonderfly
cc/ @dchen1107 @fabioy @kubernetes/goog-image
Automatic merge from submit-queue
Increase failure threshold for glbc liveness probe
This pod fails a liveness probe on occasion, probably because the failure thresholds are too strict. Simple enough that either reviewer can review.
In Kubernetes 1.2 we used template PersistentVolume for provisioning. When a
claim for dynamic volume was detected, Kubernetes did:
- create template PV for the claim with dummy pointer to storage asset
- allocate storage asset such as AWS EBS
- fill real pointer to the created storage asset to the template PV
In refactored volume provisioner, Kubernetes allocates the storage asset first
and then creates a Kubernetes PV instance already with the correct pointer
to the storage asset.
To support seamles upgrade from 1.2 to 1.3 we need to remove these
unprovisioned template PVs. The new controller does not use them, it will see
PVC for dynamic provisioning and create real PV instead.
Automatic merge from submit-queue
Fix typo and linewrap comments in PV controller
Fix some typos and linewrap long comments that I found while going over this code investigating something.
Automatic merge from submit-queue
Add timeout for image pulling
Fix#26300.
With this PR, if image pulling makes no progress for *1 minute*, the operation will be cancelled. Docker reports progress for every 512kB block (See [here](3d13fddd2b/pkg/progress/progressreader.go (L32))), *512kB/min* means the throughput is *<= 8.5kB/s*, which should be kind of abnormal?
It's a little hard to write unit test for this, so I just manually tested it. If I set the `defaultImagePullingStuckTimeout` to 0s, and `defaultImagePullingProgressReportInterval` to 1s, image pulling will be cancelled.
```
E0601 18:48:29.026003 46185 kube_docker_client.go:274] Cancel pulling image "nginx:latest" because of no progress for 0, latest progress: "89732b811e7f: Pulling fs layer "
E0601 18:48:29.026308 46185 manager.go:2110] container start failed: ErrImagePull: net/http: request canceled
```
/cc @kubernetes/sig-node
[]()
The test tries to bind configured nr. of PVs to the same nr. of PVCs.
'100' is used by default, which should take ~1-3 seconds (depends on log level).
Periodic sync is needed in rare cases, which may add another 10 seconds. - cache
from #25881 will help here and sync should not be needed at all.
The test is configurable and may be reused to measure binder performance.
Set KUBE_INTEGRATION_PV_* env. variables as described in
persistent_volume_test.go and run the tests:
# compile
$ cd test/integration
$ godep go test -tags 'integration no-docker' -c
# run the tests
$ KUBE_INTEGRATION_PV_SYNC_PERIOD=10s KUBE_INTEGRATION_PV_OBJECTS=1000 time ./integration.test -test.run TestPersistentVolumeMultiPVsPVCs -v 2
Log level '2' is useful to get timestamps of various events like
'TestPersistentVolumeMultiPVsPVCs: start' and 'TestPersistentVolumeMultiPVsPVCs:
claims are bound'.
Automatic merge from submit-queue
Stabilize persistent volume integration tests
- add more logs
- wait both for volume and claim to get bound
When binding volumes to claims the controller saves PV first and PVC right
after that. In theory, this saved PV could cause waitForPersistentVolumePhase
to finish and PVC could be checked in the test before the controller saves it.
So, wait for both PVC and PV to get bound and check the results only after
that. This is only a theory, there are no usable logs in integration tests.
Fixes#26499 (at least I hope so...)
Automatic merge from submit-queue
pin GCI version to milestone 52
This is mainly for pinning the 1.2 branch to GCI milestone 52
which contains correct docker and kubelet built in.
Doing this allows us to upgrade docker to v1.11 (issue #26455)
in GCI 53 without breaking the 1.2 release branch.
@kubernetes/goog-image @dchen1107 @roberthbailey @andyzheng0831
Controller.HasSynced() returns true when all initial claims/volumes were sent
to appropriate goroutines, not when the goroutine has actually processed them.
Automatic merge from submit-queue
Don't allow deps with no discernible license
This updates the few deps we had with no LICENSE file to current versions that do have that file. It also disallows new deps without obvious licenses.
Automatic merge from submit-queue
Attach/Detach Controller Kubelet Changes
This PR contains changes to enable attach/detach controller proposed in #20262.
Specifically it:
* Introduces a new `enable-controller-attach-detach` kubelet flag to enable control by attach/detach controller. Default enabled.
* Removes all references `SafeToDetach` annotation from controller.
* Adds the new `VolumesInUse` field to the Node Status API object.
* Modifies the controller to use `VolumesInUse` instead of `SafeToDetach` annotation to gate detachment.
* Modifies kubelet to set `VolumesInUse` before Mount and after Unmount.
* There is a bug in the `node-problem-detector` binary that causes `VolumesInUse` to get reset to nil every 30 seconds. Issue https://github.com/kubernetes/node-problem-detector/issues/9#issuecomment-221770924 opened to fix that.
* There is a bug here in the mount/unmount code that prevents resetting `VolumeInUse in some cases, this will be fixed by mount/unmount refactor.
* Have controller process detaches before attaches so that volumes referenced by pods that are rescheduled to a different node are detached first.
* Fix misc bugs in controller.
* Modify GCE attacher to: remove retries, remove mutex, and not fail if volume is already attached or already detached.
Fixes#14642, #19953
```release-note
Kubernetes v1.3 introduces a new Attach/Detach Controller. This controller manages attaching and detaching volumes on-behalf of nodes that have the "volumes.kubernetes.io/controller-managed-attach-detach" annotation.
A kubelet flag, "enable-controller-attach-detach" (default true), controls whether a node sets the "controller-managed-attach-detach" or not.
```
Automatic merge from submit-queue
Fill controller caches on startup
The controller needs to fill its caches before it starts binding/recycling/ deleting or provisioning volumes and claims. This was done using blocking initial 'xxx added' from going through syncClaim/syncVolume. However, when the caches were full, the controller waited for the next sync period to do actual binding/recycling etc.
In this patch, the controller fills its caches directly from etcd and then processes initial 'xxx added' events to reconcile the world and bind/recycle/ delete/provision stuff, resulting in faster binding after startup.
Fixes#25967 (properly)
Automatic merge from submit-queue
Trusty: fix 'find' commands and add k8s license and motd info
This PR fixes several things which should be also cherry picked in release-1.2 branch:
- Fix the 'find' command failure. See issue #26350 for the background;
- Add k8s license file into /home/kubernetes and set /etc/motd info. We fixed this in cluster/gce/gci for 1.3 branch, but have not done it for 1.2 branch. This PR simply copies the code from the GCI support.
Please note that the trusty code in master branch is under best-effort maintenance and we don't guarantee prompt fixes. But for 1.2 branch, we need to guarantee its correctness. I will test this in 1.2 branch.
@roberthbailey and @zmerlynn please review it.
cc/ @dchen1107 @fabioy @kubernetes/goog-image FYI.
Automatic merge from submit-queue
Fixes#26526 - hack/update-api-reference-docs.sh
I opened a Pull request to fix this issue https://github.com/kubernetes/kubernetes/issues/26526
The problem is that the update script ignores white spaces but the verify script doesn't which leads to a strange behaviour -> you use the update script but the verify script tells you that the api docs are not up to date.
k8s-merge-robot