75 KiB

Raw Blame History

layout	page_title	sidebar_current	description
docs	Configuration	docs-agent-config	The agent has various configuration options that can be specified via the command-line or via configuration files. All of the configuration options are completely optional. Defaults are specified with their descriptions.

Configuration

The agent has various configuration options that can be specified via the command-line or via configuration files. All of the configuration options are completely optional. Defaults are specified with their descriptions.

Configuration precedence is evaluated in the following order:

Command line arguments
Environment Variables
Configuration files

When loading configuration, Consul loads the configuration from files and directories in lexical order. For example, configuration file basic_config.json will be processed before extra_config.json. Configuration specified later will be merged into configuration specified earlier. In most cases, "merge" means that the later version will override the earlier. In some cases, such as event handlers, merging appends the handlers to the existing configuration. The exact merging behavior is specified for each option below.

Consul also supports reloading configuration when it receives the SIGHUP signal. Not all changes are respected, but those that are are documented below in the Reloadable Configuration section. The reload command can also be used to trigger a configuration reload.

Command-line Options

The options below are all specified on the command-line.

-advertise - The advertise address is used to change the address that we advertise to other nodes in the cluster. By default, the -bind address is advertised. However, in some cases, there may be a routable address that cannot be bound. This flag enables gossiping a different address to support this. If this address is not routable, the node will be in a constant flapping state as other nodes will treat the non-routability as a failure.
-advertise-wan - The advertise WAN address is used to change the address that we advertise to server nodes joining through the WAN. This can also be set on client agents when used in combination with the translate_wan_addrs configuration option. By default, the -advertise address is advertised. However, in some cases all members of all datacenters cannot be on the same physical or virtual network, especially on hybrid setups mixing cloud and private datacenters. This flag enables server nodes gossiping through the public network for the WAN while using private VLANs for gossiping to each other and their client agents, and it allows client agents to be reached at this address when being accessed from a remote datacenter if the remote datacenter is configured with translate_wan_addrs.
-bootstrap - This flag is used to control if a server is in "bootstrap" mode. It is important that no more than one server per datacenter be running in this mode. Technically, a server in bootstrap mode is allowed to self-elect as the Raft leader. It is important that only a single node is in this mode; otherwise, consistency cannot be guaranteed as multiple nodes are able to self-elect. It is not recommended to use this flag after a cluster has been bootstrapped.
-bootstrap-expect - This flag provides the number of expected servers in the datacenter. Either this value should not be provided or the value must agree with other servers in the cluster. When provided, Consul waits until the specified number of servers are available and then bootstraps the cluster. This allows an initial leader to be elected automatically. This cannot be used in conjunction with the legacy -bootstrap flag. This flag implies server mode.
-bind - The address that should be bound to for internal cluster communications. This is an IP address that should be reachable by all other nodes in the cluster. By default, this is "0.0.0.0", meaning Consul will bind to all addresses on the local machine and will advertise the first available private IPv4 address to the rest of the cluster. If there are multiple private IPv4 addresses available, Consul will exit with an error at startup. If you specify "[::]", Consul will advertise the first available public IPv6 address. If there are multiple public IPv6 addresses available, Consul will exit with an error at startup. Consul uses both TCP and UDP and the same port for both. If you have any firewalls, be sure to allow both protocols.
-serf-wan-bind - The address that should be bound to for Serf WAN gossip communications. By default, the value follows the same rules as -bind command-line flag, and if this is not specified, the -bind option is used. This is available in Consul 0.7.1 and later.
-serf-lan-bind - The address that should be bound to for Serf LAN gossip communications. This is an IP address that should be reachable by all other LAN nodes in the cluster. By default, the value follows the same rules as -bind command-line flag, and if this is not specified, the -bind option is used. This is available in Consul 0.7.1 and later.
-client - The address to which Consul will bind client interfaces, including the HTTP and DNS servers. By default, this is "127.0.0.1", allowing only loopback connections.
-config-file - A configuration file to load. For more information on the format of this file, read the Configuration Files section. This option can be specified multiple times to load multiple configuration files. If it is specified multiple times, configuration files loaded later will merge with configuration files loaded earlier. During a config merge, single-value keys (string, int, bool) will simply have their values replaced while list types will be appended together.
-config-dir - A directory of configuration files to load. Consul will load all files in this directory with the suffix ".json". The load order is alphabetical, and the the same merge routine is used as with the config-file option above. This option can be specified multiple times to load multiple directories. Sub-directories of the config directory are not loaded. For more information on the format of the configuration files, see the Configuration Files section.
-data-dir - This flag provides a data directory for the agent to store state. This is required for all agents. The directory should be durable across reboots. This is especially critical for agents that are running in server mode as they must be able to persist cluster state. Additionally, the directory must support the use of filesystem locking, meaning some types of mounted folders (e.g. VirtualBox shared folders) may not be suitable.
-datacenter - This flag controls the datacenter in which the agent is running. If not provided, it defaults to "dc1". Consul has first-class support for multiple datacenters, but it relies on proper configuration. Nodes in the same datacenter should be on a single LAN.
-dev - Enable development server mode. This is useful for quickly starting a Consul agent with all persistence options turned off, enabling an in-memory server which can be used for rapid prototyping or developing against the API. This mode is not intended for production use as it does not write any data to disk.
-disable-host-node-id - Setting this to true will prevent Consul from using information from the host to generate a deterministic node ID, and will instead generate a random node ID which will be persisted in the data directory. This is useful when running multiple Consul agents on the same host for testing. This defaults to false in Consul prior to version 0.8.5 and in 0.8.5 and later defaults to true, so you must opt-in for host-based IDs. Host-based IDs are generated using https://github.com/shirou/gopsutil/tree/master/host, which is shared with HashiCorp's Nomad, so if you opt-in to host-based IDs then Consul and Nomad will use information on the host to automatically assign the same ID in both systems.
-disable-keyring-file - If set, the keyring will not be persisted to a file. Any installed keys will be lost on shutdown, and only the given -encrypt key will be available on startup. This defaults to false.
-dns-port - the DNS port to listen on. This overrides the default port 8600. This is available in Consul 0.7 and later.
-domain - By default, Consul responds to DNS queries in the "consul." domain. This flag can be used to change that domain. All queries in this domain are assumed to be handled by Consul and will not be recursively resolved.
enable-script-checks This controls whether health checks that execute scripts are enabled on this agent, and defaults to false so operators must opt-in to allowing these. If enabled, it is recommended to enable ACLs as well to control which users are allowed to register new checks to execute scripts. This was added in Consul 0.9.0.
-encrypt - Specifies the secret key to use for encryption of Consul network traffic. This key must be 16-bytes that are Base64-encoded. The easiest way to create an encryption key is to use consul keygen. All nodes within a cluster must share the same encryption key to communicate. The provided key is automatically persisted to the data directory and loaded automatically whenever the agent is restarted. This means that to encrypt Consul's gossip protocol, this option only needs to be provided once on each agent's initial startup sequence. If it is provided after Consul has been initialized with an encryption key, then the provided key is ignored and a warning will be displayed.
-http-port - the HTTP API port to listen on. This overrides the default port 8500. This option is very useful when deploying Consul to an environment which communicates the HTTP port through the environment e.g. PaaS like CloudFoundry, allowing you to set the port directly via a Procfile.
-join - Address of another agent to join upon starting up. This can be specified multiple times to specify multiple agents to join. If Consul is unable to join with any of the specified addresses, agent startup will fail. By default, the agent won't join any nodes when it starts up. Note that using retry_join could be more appropriate to help mitigate node startup race conditions when automating a Consul cluster deployment.\
-retry-join - Similar to -join but allows retrying a join if the first attempt fails. The list should contain IPv4 addresses with optional Serf LAN port number also specified or bracketed IPv6 addresses with optional port number — for example: [::1]:8301. This is useful for cases where we know the address will become available eventually.
-retry-join-ec2-tag-key - The Amazon EC2 instance tag key to filter on. When used with -retry-join-ec2-tag-value, Consul will attempt to join EC2 instances with the given tag key and value on startup.

For AWS authentication the following methods are supported, in order:
- Static credentials (from the config file)
- Environment variables (AWS_ACCESS_KEY_ID and AWS_SECRET_ACCESS_KEY)
- Shared credentials file (~/.aws/credentials or the path specified by AWS_SHARED_CREDENTIALS_FILE)
- ECS task role metadata (container-specific).
- EC2 instance role metadata.
The only required IAM permission is ec2:DescribeInstances, and it is recommended you make a dedicated key used only for auto-joining.
-retry-join-ec2-tag-value - The Amazon EC2 instance tag value to filter on.
-retry-join-ec2-region - (Optional) The Amazon EC2 region to use. If not specified, Consul will use the local instance's EC2 metadata endpoint to discover the region.
-retry-join-gce-tag-value - A Google Compute Engine instance tag to filter on. Much like the -retry-join-ec2-* options, this gives Consul the option of doing server discovery on Google Compute Engine by searching the tags assigned to any particular instance.
-retry-join-gce-project-name - The project to search in for the tag supplied by -retry-join-gce-tag-value. If this is run from within a GCE instance, the default is the project the instance is located in.
-retry-join-gce-zone-pattern - A regular expression that indicates the zones the tag should be searched in. For example, while us-west1-a would only search in us-west1-a, us-west1-.* would search in us-west1-a and us-west1-b. The default is to search globally.
-retry-join-gce-credentials-file - The path to the JSON credentials file of the GCE Service Account that will be used to search for instances. Note that this can also reside in the following locations:
- A path supplied by the GOOGLE_APPLICATION_CREDENTIALS environment variable
- The %APPDATA%/gcloud/application_default_credentials.json file (Windows) or $HOME/.config/gcloud/application_default_credentials.json (Linux and other systems)
- If none of these exist and discovery is being run from a GCE instance, the instance's configured service account will be used.
-retry-join-azure-tag-name - The Azure instance tag name to filter on. When used with -retry-join-azure-tag-value, Consul will attempt to join Azure instances with the given tag name and value on startup.

For Azure authentication the following methods are supported, in order:
- Static credentials (from the config file)
The only permission needed is the ListAll method for NetworkInterfaces. It is recommended you make a dedicated key used only for auto-joining.
-retry-join-azure-tag-value - The Azure instance tag value to filter on.
-retry-interval - Time to wait between join attempts. Defaults to 30s.
-retry-max - The maximum number of -join attempts to be made before exiting with return code 1. By default, this is set to 0 which is interpreted as infinite retries.
-join-wan - Address of another wan agent to join upon starting up. This can be specified multiple times to specify multiple WAN agents to join. If Consul is unable to join with any of the specified addresses, agent startup will fail. By default, the agent won't -join-wan any nodes when it starts up.
-retry-join-wan - Similar to retry-join but allows retrying a wan join if the first attempt fails. This is useful for cases where we know the address will become available eventually.
-retry-interval-wan - Time to wait between -join-wan attempts. Defaults to 30s.
-retry-max-wan - The maximum number of -join-wan attempts to be made before exiting with return code 1. By default, this is set to 0 which is interpreted as infinite retries.
-log-level - The level of logging to show after the Consul agent has started. This defaults to "info". The available log levels are "trace", "debug", "info", "warn", and "err". You can always connect to an agent via consul monitor and use any log level. Also, the log level can be changed during a config reload.
-node - The name of this node in the cluster. This must be unique within the cluster. By default this is the hostname of the machine.
-node-id - Available in Consul 0.7.3 and later, this is a unique identifier for this node across all time, even if the name of the node or address changes. This must be in the form of a hex string, 36 characters long, such as adf4238a-882b-9ddc-4a9d-5b6758e4159e. If this isn't supplied, which is the most common case, then the agent will generate an identifier at startup and persist it in the data directory so that it will remain the same across agent restarts. Information from the host will be used to generate a deterministic node ID if possible, unless -disable-host-node-id is set to true.
-node-meta - Available in Consul 0.7.3 and later, this specifies an arbitrary metadata key/value pair to associate with the node, of the form key:value. This can be specified multiple times. Node metadata pairs have the following restrictions:
- A maximum of 64 key/value pairs can be registered per node.
- Metadata keys must be between 1 and 128 characters (inclusive) in length
- Metadata keys must contain only alphanumeric, -, and _ characters.
- Metadata keys must not begin with the consul- prefix; that is reserved for internal use by Consul.
- Metadata values must be between 0 and 512 (inclusive) characters in length.
-pid-file - This flag provides the file path for the agent to store its PID. This is useful for sending signals (for example, SIGINT to close the agent or SIGHUP to update check definite
-protocol - The Consul protocol version to use. This defaults to the latest version. This should be set only when upgrading. You can view the protocol versions supported by Consul by running consul -v.
-raft-protocol - This controls the internal version of the Raft consensus protocol used for server communications. This defaults to 2 but must be set to 3 in order to gain access to Autopilot features, with the exception of cleanup_dead_servers.
-recursor - Specifies the address of an upstream DNS server. This option may be provided multiple times, and is functionally equivalent to the recursors configuration option.
-rejoin - When provided, Consul will ignore a previous leave and attempt to rejoin the cluster when starting. By default, Consul treats leave as a permanent intent and does not attempt to join the cluster again when starting. This flag allows the previous state to be used to rejoin the cluster.
-server - This flag is used to control if an agent is in server or client mode. When provided, an agent will act as a Consul server. Each Consul cluster must have at least one server and ideally no more than 5 per datacenter. All servers participate in the Raft consensus algorithm to ensure that transactions occur in a consistent, linearizable manner. Transactions modify cluster state, which is maintained on all server nodes to ensure availability in the case of node failure. Server nodes also participate in a WAN gossip pool with server nodes in other datacenters. Servers act as gateways to other datacenters and forward traffic as appropriate.
-non-voting-server - (Enterprise-only) This flag is used to make the server not participate in the Raft quorum, and have it only receive the data replication stream. This can be used to add read scalability to a cluster in cases where a high volume of reads to servers are needed.
-syslog - This flag enables logging to syslog. This is only supported on Linux and OSX. It will result in an error if provided on Windows.
-ui - Enables the built-in web UI server and the required HTTP routes. This eliminates the need to maintain the Consul web UI files separately from the binary.
-ui-dir - This flag provides the directory containing the Web UI resources for Consul. This will automatically enable the Web UI. The directory must be readable to the agent. Starting with Consul version 0.7.0 and later, the Web UI assets are included in the binary so this flag is no longer necessary; specifying only the -ui flag is enough to enable the Web UI. Specifying both the '-ui' and '-ui-dir' flags will result in an error.

Configuration Files

In addition to the command-line options, configuration can be put into files. This may be easier in certain situations, for example when Consul is being configured using a configuration management system.

The configuration files are JSON formatted, making them easily readable and editable by both humans and computers. The configuration is formatted as a single JSON object with configuration within it.

Configuration files are used for more than just setting up the agent, they are also used to provide check and service definitions. These are used to announce the availability of system servers to the rest of the cluster. They are documented separately under check configuration and service configuration respectively. The service and check definitions support being updated during a reload.

Example Configuration File

{
  "datacenter": "east-aws",
  "data_dir": "/opt/consul",
  "log_level": "INFO",
  "node_name": "foobar",
  "server": true,
  "watches": [
    {
        "type": "checks",
        "handler": "/usr/bin/health-check-handler.sh"
    }
  ],
  "telemetry": {
     "statsite_address": "127.0.0.1:2180"
  }
}

Example Configuration File, with TLS

{
  "datacenter": "east-aws",
  "data_dir": "/opt/consul",
  "log_level": "INFO",
  "node_name": "foobar",
  "server": true,
  "addresses": {
    "https": "0.0.0.0"
  },
  "ports": {
    "https": 8080
  },
  "key_file": "/etc/pki/tls/private/my.key",
  "cert_file": "/etc/pki/tls/certs/my.crt",
  "ca_file": "/etc/pki/tls/certs/ca-bundle.crt"
}

See, especially, the use of the ports setting:

"ports": {
  "https": 8080
}

Consul will not enable TLS for the HTTP API unless the https port has been assigned a port number > 0.

Configuration Key Reference

acl_datacenter - This designates the datacenter which is authoritative for ACL information. It must be provided to enable ACLs. All servers and datacenters must agree on the ACL datacenter. Setting it on the servers is all you need for cluster-level enforcement, but for the APIs to forward properly from the clients, it must be set on them too. In Consul 0.8 and later, this also enables agent-level enforcement of ACLs. Please see the ACL Guide for more details.
acl_default_policy - Either "allow" or "deny"; defaults to "allow". The default policy controls the behavior of a token when there is no matching rule. In "allow" mode, ACLs are a blacklist: any operation not specifically prohibited is allowed. In "deny" mode, ACLs are a whitelist: any operation not specifically allowed is blocked. Note: this will not take effect until you've set acl_datacenter to enable ACL support.
acl_down_policy - Either "allow", "deny" or "extend-cache"; "extend-cache" is the default. In the case that the policy for a token cannot be read from the acl_datacenter or leader node, the down policy is applied. In "allow" mode, all actions are permitted, "deny" restricts all operations, and "extend-cache" allows any cached ACLs to be used, ignoring their TTL values. If a non-cached ACL is used, "extend-cache" acts like "deny".
acl_agent_master_token - Used to access agent endpoints that require agent read or write privileges, or node read privileges, even if Consul servers aren't present to validate any tokens. This should only be used by operators during outages, regular ACL tokens should normally be used by applications. This was added in Consul 0.7.2 and is only used when acl_enforce_version_8 is set to true.
acl_agent_token - Used for clients and servers to perform internal operations. If this isn't specified, then the acl_token will be used. This was added in Consul 0.7.2.

This token must at least have write access to the node name it will register as in order to set any of the node-level information in the catalog such as metadata, or the node's tagged addresses. There are other places this token is used, please see ACL Agent Token for more details.
acl_enforce_version_8 - Used for clients and servers to determine if enforcement should occur for new ACL policies being previewed before Consul 0.8. Added in Consul 0.7.2, this defaults to false in versions of Consul prior to 0.8, and defaults to true in Consul 0.8 and later. This helps ease the transition to the new ACL features by allowing policies to be in place before enforcement begins. Please see the ACL Guide for more details.
acl_master_token - Only used for servers in the acl_datacenter. This token will be created with management-level permissions if it does not exist. It allows operators to bootstrap the ACL system with a token ID that is well-known.

The acl_master_token is only installed when a server acquires cluster leadership. If you would like to install or change the acl_master_token, set the new value for acl_master_token in the configuration for all servers. Once this is done, restart the current leader to force a leader election. If the acl_master_token is not supplied, then the servers do not create a master token. When you provide a value, it can be any string value. Using a UUID would ensure that it looks the same as the other tokens, but isn't strictly necessary.
acl_replication_token - Only used for servers outside the acl_datacenter running Consul 0.7 or later. When provided, this will enable ACL replication using this token to retrieve and replicate the ACLs to the non-authoritative local datacenter.

If there's a partition or other outage affecting the authoritative datacenter, and the acl_down_policy is set to "extend-cache", tokens not in the cache can be resolved during the outage using the replicated set of ACLs. Please see the ACL Guide replication section for more details.
acl_token - When provided, the agent will use this token when making requests to the Consul servers. Clients can override this token on a per-request basis by providing the "?token" query parameter. When not provided, the empty token, which maps to the 'anonymous' ACL policy, is used.
acl_ttl - Used to control Time-To-Live caching of ACLs. By default, this is 30 seconds. This setting has a major performance impact: reducing it will cause more frequent refreshes while increasing it reduces the number of refreshes. However, because the caches are not actively invalidated, ACL policy may be stale up to the TTL value.
addresses - This is a nested object that allows setting bind addresses.

http supports binding to a Unix domain socket. A socket can be specified in the form unix:///path/to/socket. A new domain socket will be created at the given path. If the specified file path already exists, Consul will attempt to clear the file and create the domain socket in its place. The permissions of the socket file are tunable via the unix_sockets config construct.

When running Consul agent commands against Unix socket interfaces, use the -http-addr argument to specify the path to the socket. You can also place the desired values in the CONSUL_HTTP_ADDR environment variable.

For TCP addresses, the variable values should be an IP address with the port. For example: 10.0.0.1:8500 and not 10.0.0.1. However, ports are set separately in the ports structure when defining them in a configuration file.

The following keys are valid:
- dns - The DNS server. Defaults to client_addr
- http - The HTTP API. Defaults to client_addr
- https - The HTTPS API. Defaults to client_addr
advertise_addr Equivalent to the -advertise command-line flag.
serf_wan_bind Equivalent to the -serf-wan-bind command-line flag.
serf_lan_bind Equivalent to the -serf-lan-bind command-line flag.
advertise_addrs Allows to set the advertised addresses for SerfLan, SerfWan and RPC together with the port. This gives you more control than -advertise or -advertise-wan while it serves the same purpose. These settings might override -advertise or -advertise-wan

This is a nested setting that allows the following keys:
- serf_lan - The SerfLan address. Accepts values in the form of "host:port" like "10.23.31.101:8301".
- serf_wan - The SerfWan address. Accepts values in the form of "host:port" like "10.23.31.101:8302".
- rpc - The server RPC address. Accepts values in the form of "host:port" like "10.23.31.101:8300".
advertise_addr_wan Equivalent to the -advertise-wan command-line flag.
autopilot Added in Consul 0.8, this object allows a number of sub-keys to be set which can configure operator-friendly settings for Consul servers. For more information about Autopilot, see the Autopilot Guide.

The following sub-keys are available:
- cleanup_dead_servers - This controls the automatic removal of dead server nodes periodically and whenever a new server is added to the cluster. Defaults to true.
- last_contact_threshold - Controls the maximum amount of time a server can go without contact from the leader before being considered unhealthy. Must be a duration value such as 10s. Defaults to 200ms.
- max_trailing_logs - Controls the maximum number of log entries that a server can trail the leader by before being considered unhealthy. Defaults to 250.
- server_stabilization_time - Controls the minimum amount of time a server must be stable in the 'healthy' state before being added to the cluster. Only takes effect if all servers are running Raft protocol version 3 or higher. Must be a duration value such as 30s. Defaults to 10s.
- redundancy_zone_tag - (Enterprise-only) This controls the -node-meta key to use when Autopilot is separating servers into zones for redundancy. Only one server in each zone can be a voting member at one time. If left blank (the default), this feature will be disabled.
- disable_upgrade_migration - (Enterprise-only) If set to true, this setting will disable Autopilot's upgrade migration strategy in Consul Enterprise of waiting until enough newer-versioned servers have been added to the cluster before promoting any of them to voters. Defaults to false.
bootstrap Equivalent to the -bootstrap command-line flag.
bootstrap_expect Equivalent to the -bootstrap-expect command-line flag.
bind_addr Equivalent to the -bind command-line flag.
ca_file This provides a file path to a PEM-encoded certificate authority. The certificate authority is used to check the authenticity of client and server connections with the appropriate verify_incoming or verify_outgoing flags.
ca_path This provides a path to a directory of PEM-encoded certificate authority files. These certificate authorities are used to check the authenticity of client and server connections with the appropriate verify_incoming or verify_outgoing flags.
cert_file This provides a file path to a PEM-encoded certificate. The certificate is provided to clients or servers to verify the agent's authenticity. It must be provided along with key_file.
check_update_interval This interval controls how often check output from checks in a steady state is synchronized with the server. By default, this is set to 5 minutes ("5m"). Many checks which are in a steady state produce slightly different output per run (timestamps, etc) which cause constant writes. This configuration allows deferring the sync of check output for a given interval to reduce write pressure. If a check ever changes state, the new state and associated output is synchronized immediately. To disable this behavior, set the value to "0s".
client_addr Equivalent to the -client command-line flag.
datacenter Equivalent to the -datacenter command-line flag.
data_dir Equivalent to the -data-dir command-line flag.
disable_anonymous_signature Disables providing an anonymous signature for de-duplication with the update check. See disable_update_check.
disable_host_node_id Equivalent to the -disable-host-node-id command-line flag.
disable_remote_exec Disables support for remote execution. When set to true, the agent will ignore any incoming remote exec requests. In versions of Consul prior to 0.8, this defaulted to false. In Consul 0.8 the default was changed to true, to make remote exec opt-in instead of opt-out.
disable_update_check Disables automatic checking for security bulletins and new version releases.
dns_config This object allows a number of sub-keys to be set which can tune how DNS queries are serviced. See this guide on DNS caching for more detail.

The following sub-keys are available:
- allow_stale - Enables a stale query for DNS information. This allows any Consul server, rather than only the leader, to service the request. The advantage of this is you get linear read scalability with Consul servers. In versions of Consul prior to 0.7, this defaulted to false, meaning all requests are serviced by the leader, providing stronger consistency but less throughput and higher latency. In Consul 0.7 and later, this defaults to true for better utilization of available servers.
- max_stale - When allow_stale is specified, this is used to limit how stale results are allowed to be. If a Consul server is behind the leader by more than max_stale, the query will be re-evaluated on the leader to get more up-to-date results. Prior to Consul 0.7.1 this defaulted to 5 seconds; in Consul 0.7.1 and later this defaults to 10 years ("87600h") which effectively allows DNS queries to be answered by any server, no matter how stale. In practice, servers are usually only milliseconds behind the leader, so this lets Consul continue serving requests in long outage scenarios where no leader can be elected.
- node_ttl - By default, this is "0s", so all node lookups are served with a 0 TTL value. DNS caching for node lookups can be enabled by setting this value. This should be specified with the "s" suffix for second or "m" for minute.
- service_ttl - This is a sub-object which allows for setting a TTL on service lookups with a per-service policy. The "*" wildcard service can be used when there is no specific policy available for a service. By default, all services are served with a 0 TTL value. DNS caching for service lookups can be enabled by setting this value.
- enable_truncate - If set to true, a UDP DNS query that would return more than 3 records, or more than would fit into a valid UDP response, will set the truncated flag, indicating to clients that they should re-query using TCP to get the full set of records.
- only_passing - If set to true, any nodes whose health checks are warning or critical will be excluded from DNS results. If false, the default, only nodes whose healthchecks are failing as critical will be excluded. For service lookups, the health checks of the node itself, as well as the service-specific checks are considered. For example, if a node has a health check that is critical then all services on that node will be excluded because they are also considered critical.
- recursor_timeout - Timeout used by Consul when recursively querying an upstream DNS server. See recursors for more details. Default is 2s. This is available in Consul 0.7 and later.
- disable_compression - If set to true, DNS responses will not be compressed. Compression was added and enabled by default in Consul 0.7.
- udp_answer_limit - Limit the number of resource records contained in the answer section of a UDP-based DNS response. When answering a question, Consul will use the complete list of matching hosts, shuffle the list randomly, and then limit the number of answers to udp_answer_limit (default 3). In environments where RFC 3484 Section 6 Rule 9 is implemented and enforced (i.e. DNS answers are always sorted and therefore never random), clients may need to set this value to 1 to preserve the expected randomized distribution behavior (note: RFC 3484 has been obsoleted by RFC 6724 and as a result it should be increasingly uncommon to need to change this value with modern resolvers).
domain Equivalent to the -domain command-line flag.
enable_debug When set, enables some additional debugging features. Currently, this is only used to set the runtime profiling HTTP endpoints.
enable_script_checks Equivalent to the -enable-script-checks command-line flag.
enable_syslog Equivalent to the -syslog command-line flag.
encrypt Equivalent to the -encrypt command-line flag.
encrypt_verify_incoming - This is an optional parameter that can be used to disable enforcing encryption for incoming gossip in order to upshift from unencrypted to encrypted gossip on a running cluster. See [this section] (/docs/agent/encryption.html#configuring-gossip-encryption-on-an-existing-cluster) for more information. Defaults to true.
encrypt_verify_outgoing - This is an optional parameter that can be used to disable enforcing encryption for outgoing gossip in order to upshift from unencrypted to encrypted gossip on a running cluster. See [this section] (/docs/agent/encryption.html#configuring-gossip-encryption-on-an-existing-cluster) for more information. Defaults to true.
disable_keyring_file - Equivalent to the -disable-keyring-file command-line flag.
key_file This provides a the file path to a PEM-encoded private key. The key is used with the certificate to verify the agent's authenticity. This must be provided along with cert_file.
http_api_response_headers This object allows adding headers to the HTTP API responses. For example, the following config can be used to enable CORS on the HTTP API endpoints:
```
  {
    "http_api_response_headers": {
        "Access-Control-Allow-Origin": "*"
    }
  }
```
This has been deprecated in Consul 0.8.5. Setting this value will set http_config.response_headers instead for backwards compatibility.
http_config This object allows setting options for the HTTP API.

The following sub-keys are available:
- block_endpoints This object is a list of HTTP endpoint prefixes to block on the agent, and defaults to an empty list, meaning all endpoints are enabled. Any endpoint that has a common prefix with one of the entries on this list will be blocked and will return a 403 response code when accessed. For example, to block all of the V1 ACL endpoints, set this to ["/v1/acl"], which will block /v1/acl/create, /v1/acl/update, and the other ACL endpoints that begin with /v1/acl. Any CLI commands that use disabled endpoints will no longer function as well. For more general access control, Consul's ACL system should be used, but this option is useful for removing access to HTTP endpoints completely, or on specific agents. This is available in Consul 0.9.0 and later.
- response_headers This object allows adding headers to the HTTP API responses. For example, the following config can be used to enable CORS on the HTTP API endpoints:
```
  {
    "http_config": {
      "response_headers": {
        "Access-Control-Allow-Origin": "*"
      }
    }
  }
```
leave_on_terminate If enabled, when the agent receives a TERM signal, it will send a Leave message to the rest of the cluster and gracefully leave. The default behavior for this feature varies based on whether or not the agent is running as a client or a server (prior to Consul 0.7 the default value was unconditionally set to false). On agents in client-mode, this defaults to true and for agents in server-mode, this defaults to false.
log_level Equivalent to the -log-level command-line flag.
node_id Equivalent to the -node-id command-line flag.
node_name Equivalent to the -node command-line flag.
node_meta Available in Consul 0.7.3 and later, This object allows associating arbitrary metadata key/value pairs with the local node, which can then be used for filtering results from certain catalog endpoints. See the -node-meta command-line flag for more information.
```
  {
    "node_meta": {
        "instance_type": "t2.medium"
    }
  }
```
performance Available in Consul 0.7 and later, this is a nested object that allows tuning the performance of different subsystems in Consul. See the Server Performance guide for more details. The following parameters are available:
- raft_multiplier - An integer multiplier used by Consul servers to scale key Raft timing parameters. Omitting this value or setting it to 0 uses default timing described below. Lower values are used to tighten timing and increase sensitivity while higher values relax timings and reduce sensitivity. Tuning this affects the time it takes Consul to detect leader failures and to perform leader elections, at the expense of requiring more network and CPU resources for better performance.
  
  By default, Consul will use a lower-performance timing that's suitable for minimal Consul servers, currently equivalent to setting this to a value of 5 (this default may be changed in future versions of Consul, depending if the target minimum server profile changes). Setting this to a value of 1 will configure Raft to its highest-performance mode, equivalent to the default timing of Consul prior to 0.7, and is recommended for production Consul servers. See the note on last contact timing for more details on tuning this parameter. The maximum allowed value is 10.
ports This is a nested object that allows setting the bind ports for the following keys:
- dns - The DNS server, -1 to disable. Default 8600.
- http - The HTTP API, -1 to disable. Default 8500.
- https - The HTTPS API, -1 to disable. Default -1 (disabled).
- rpc - The CLI RPC endpoint. Default 8400. This is deprecated in Consul 0.8 and later.
- serf_lan - The Serf LAN port. Default 8301.
- serf_wan - The Serf WAN port. Default 8302.
- server - Server RPC address. Default 8300.
protocol Equivalent to the -protocol command-line flag.
raft_protocol Equivalent to the -raft-protocol command-line flag.
reap This controls Consul's automatic reaping of child processes, which is useful if Consul is running as PID 1 in a Docker container. If this isn't specified, then Consul will automatically reap child processes if it detects it is running as PID 1. If this is set to true or false, then it controls reaping regardless of Consul's PID (forces reaping on or off, respectively). This option was removed in Consul 0.7.1. For later versions of Consul, you will need to reap processes using a wrapper, please see the Consul Docker image entry point script for an example.
reconnect_timeout This controls how long it takes for a failed node to be completely removed from the cluster. This defaults to 72 hours and it is recommended that this is set to at least double the maximum expected recoverable outage time for a node or network partition. WARNING: Setting this time too low could cause Consul servers to be removed from quorum during an extended node failure or partition, which could complicate recovery of the cluster. The value is a time with a unit suffix, which can be "s", "m", "h" for seconds, minutes, or hours. The value must be >= 8 hours.
reconnect_timeout_wan This is the WAN equivalent of the reconnect_timeout parameter, which controls how long it takes for a failed server to be completely removed from the WAN pool. This also defaults to 72 hours, and must be >= 8 hours.
recursor Provides a single recursor address. This has been deprecated, and the value is appended to the recursors list for backwards compatibility.
recursors This flag provides addresses of upstream DNS servers that are used to recursively resolve queries if they are not inside the service domain for Consul. For example, a node can use Consul directly as a DNS server, and if the record is outside of the "consul." domain, the query will be resolved upstream.
rejoin_after_leave Equivalent to the -rejoin command-line flag.
retry_join Equivalent to the -retry-join command-line flag. Takes a list of addresses to attempt joining every retry_interval until at least one join works. The list should contain IPv4 addresses with optional Serf LAN port number also specified or bracketed IPv6 addresses with optional port number — for example: [::1]:8301.
retry_join_ec2 - This is a nested object that allows the setting of EC2-related -retry-join options.

The following keys are valid:
- region - The AWS region. Equivalent to the -retry-join-ec2-region command-line flag.
- tag_key - The EC2 instance tag key to filter on. Equivalent to the
  -retry-join-ec2-tag-key command-line flag.
- tag_value - The EC2 instance tag value to filter on. Equivalent to the
  -retry-join-ec2-tag-value command-line flag.
- access_key_id - The AWS access key ID to use for authentication.
- secret_access_key - The AWS secret access key to use for authentication.
retry_join_gce - This is a nested object that allows the setting of GCE-related -retry-join options.

The following keys are valid:
- project_name - The GCE project name. Equivalent to the
  -retry-join-gce-project-name command-line flag.
- zone_pattern - The regular expression indicating the zones to search in. Equivalent to the
  -retry-join-gce-zone-pattern command-line flag.
- tag_value - The GCE instance tag value to filter on. Equivalent to the
  -retry-join-gce-tag-value command-line flag.
- credentials_file - The path to the GCE service account credentials file. Equivalent to the
  -retry-join-gce-credentials-file command-line flag.
retry_join_azure - This is a nested object that allows the setting of Azure-related -retry-join options.

The following keys are valid:
- tag_name - The Azure instance tag name to filter on. Equivalent to the
  -retry-join-azure-tag-name command-line flag.
- tag_value - The Azure instance tag value to filter on. Equivalent to the
  -retry-join-azure-tag-value command-line flag.
- subscription_id - The Azure Subscription ID to use for authentication.
- tenant_id - The Azure Tenant ID to use for authentication.
- client_id - The Azure Client ID to use for authentication.
- secret_access_key - The Azure secret access key to use for authentication.
retry_interval Equivalent to the -retry-interval command-line flag.
retry_join_wan Equivalent to the -retry-join-wan command-line flag. Takes a list of addresses to attempt joining to WAN every retry_interval_wan until at least one join works.
retry_interval_wan Equivalent to the -retry-interval-wan command-line flag.
server Equivalent to the -server command-line flag.
non_voting_server - Equivalent to the -non-voting-server command-line flag.
server_name When provided, this overrides the node_name for the TLS certificate. It can be used to ensure that the certificate name matches the hostname we declare.
session_ttl_min The minimum allowed session TTL. This ensures sessions are not created with TTL's shorter than the specified limit. It is recommended to keep this limit at or above the default to encourage clients to send infrequent heartbeats. Defaults to 10s.
skip_leave_on_interrupt This is similar to leave_on_terminate but only affects interrupt handling. When Consul receives an interrupt signal (such as hitting Control-C in a terminal), Consul will gracefully leave the cluster. Setting this to true disables that behavior. The default behavior for this feature varies based on whether or not the agent is running as a client or a server (prior to Consul 0.7 the default value was unconditionally set to false). On agents in client-mode, this defaults to false and for agents in server-mode, this defaults to true (i.e. Ctrl-C on a server will keep the server in the cluster and therefore quorum, and Ctrl-C on a client will gracefully leave).
start_join An array of strings specifying addresses of nodes to -join upon startup. Note that using retry_join could be more appropriate to help mitigate node startup race conditions when automating a Consul cluster deployment.
start_join_wan An array of strings specifying addresses of WAN nodes to -join-wan upon startup.
telemetry This is a nested object that configures where Consul sends its runtime telemetry, and contains the following keys:
- statsd_address This provides the address of a statsd instance in the format host:port. If provided, Consul will send various telemetry information to that instance for aggregation. This can be used to capture runtime information. This sends UDP packets only and can be used with statsd or statsite.
- statsite_address This provides the address of a statsite instance in the format host:port. If provided, Consul will stream various telemetry information to that instance for aggregation. This can be used to capture runtime information. This streams via TCP and can only be used with statsite.
- statsite_prefix The prefix used while writing all telemetry data to statsite. By default, this is set to "consul".
- dogstatsd_addr This provides the address of a DogStatsD instance in the format host:port. DogStatsD is a protocol-compatible flavor of statsd, with the added ability to decorate metrics with tags and event information. If provided, Consul will send various telemetry information to that instance for aggregation. This can be used to capture runtime information.
- dogstatsd_tags This provides a list of global tags that will be added to all telemetry packets sent to DogStatsD. It is a list of strings, where each string looks like "my_tag_name:my_tag_value".
- disable_hostname This controls whether or not to prepend runtime telemetry with the machine's hostname, defaults to false.
- circonus_api_token A valid API Token used to create/manage check. If provided, metric management is enabled.
- circonus_api_app A valid app name associated with the API token. By default, this is set to "consul".
- circonus_api_url The base URL to use for contacting the Circonus API. By default, this is set to "https://api.circonus.com/v2".
- circonus_submission_interval The interval at which metrics are submitted to Circonus. By default, this is set to "10s" (ten seconds).
- circonus_submission_url The check.config.submission_url field, of a Check API object, from a previously created HTTPTRAP check.
- circonus_check_id The Check ID (not check bundle) from a previously created HTTPTRAP check. The numeric portion of the check._cid field in the Check API object.
- circonus_check_force_metric_activation Force activation of metrics which already exist and are not currently active. If check management is enabled, the default behavior is to add new metrics as they are encoutered. If the metric already exists in the check, it will not be activated. This setting overrides that behavior. By default, this is set to false.
- circonus_check_instance_id Uniquely identifies the metrics coming from this instance. It can be used to maintain metric continuity with transient or ephemeral instances as they move around within an infrastructure. By default, this is set to hostname:application name (e.g. "host123:consul").
- circonus_check_search_tag A special tag which, when coupled with the instance id, helps to narrow down the search results when neither a Submission URL or Check ID is provided. By default, this is set to service:application name (e.g. "service:consul").
- <a name="telemetry-circonus_check_display_name"circonus_check_display_name Specifies a name to give a check when it is created. This name is displayed in the Circonus UI Checks list. Available in Consul 0.7.2 and later.
- <a name="telemetry-circonus_check_tags"circonus_check_tags Comma separated list of additional tags to add to a check when it is created. Available in Consul 0.7.2 and later.
- circonus_broker_id The ID of a specific Circonus Broker to use when creating a new check. The numeric portion of broker._cid field in a Broker API object. If metric management is enabled and neither a Submission URL nor Check ID is provided, an attempt will be made to search for an existing check using Instance ID and Search Tag. If one is not found, a new HTTPTRAP check will be created. By default, this is not used and a random Enterprise Broker is selected, or the default Circonus Public Broker.
- circonus_broker_select_tag A special tag which will be used to select a Circonus Broker when a Broker ID is not provided. The best use of this is to as a hint for which broker should be used based on where this particular instance is running (e.g. a specific geo location or datacenter, dc:sfo). By default, this is left blank and not used.
statsd_addr Deprecated, see the telemetry structure
statsite_addr Deprecated, see the telemetry structure
statsite_prefix Deprecated, see the telemetry structure
dogstatsd_addr Deprecated, see the telemetry structure
dogstatsd_tags Deprecated, see the telemetry structure
syslog_facility When enable_syslog is provided, this controls to which facility messages are sent. By default, LOCAL0 will be used.
tls_min_version Added in Consul 0.7.4, this specifies the minimum supported version of TLS. Accepted values are "tls10", "tls11" or "tls12". This defaults to "tls10". WARNING: TLS 1.1 and lower are generally considered less secure; avoid using these if possible. This will be changed to default to "tls12" in Consul 0.8.0.
tls_cipher_suites Added in Consul 0.8.2, this specifies the list of supported ciphersuites as a comma-separated-list. The list of all available ciphersuites is available in the Golang TLS documentation.
tls_prefer_server_cipher_suites Added in Consul 0.8.2, this will cause Consul to prefer the server's ciphersuite over the client ciphersuites.
<a name="translate_wan_addrs"translate_wan_addrs If set to true, Consul will prefer a node's configured WAN address when servicing DNS and HTTP requests for a node in a remote datacenter. This allows the node to be reached within its own datacenter using its local address, and reached from other datacenters using its WAN address, which is useful in hybrid setups with mixed networks. This is disabled by default.

Starting in Consul 0.7 and later, node addresses in responses to HTTP requests will also prefer a node's configured WAN address when querying for a node in a remote datacenter. An X-Consul-Translate-Addresses header will be present on all responses when translation is enabled to help clients know that the addresses may be translated. The TaggedAddresses field in responses also have a lan address for clients that need knowledge of that address, regardless of translation.

The following endpoints translate addresses:
- /v1/catalog/nodes
- /v1/catalog/node/<node>
- /v1/catalog/service/<service>
- /v1/health/service/<service>
- /v1/query/<query or name>/execute
ui - Equivalent to the -ui command-line flag.
ui_dir - Equivalent to the -ui-dir command-line flag. This configuration key is not required as of Consul version 0.7.0 and later. Specifying this configuration key will enable the web UI. There is no need to specify both ui-dir and ui. Specifying both will result in an error.
unix_sockets - This allows tuning the ownership and permissions of the Unix domain socket files created by Consul. Domain sockets are only used if the HTTP address is configured with the unix:// prefix.

It is important to note that this option may have different effects on different operating systems. Linux generally observes socket file permissions while many BSD variants ignore permissions on the socket file itself. It is important to test this feature on your specific distribution. This feature is currently not functional on Windows hosts.

The following options are valid within this construct and apply globally to all sockets created by Consul:
- user - The name or ID of the user who will own the socket file.
- group - The group ID ownership of the socket file. This option currently only supports numeric IDs.
- mode - The permission bits to set on the file.
verify_incoming - If set to true, Consul requires that all incoming connections make use of TLS and that the client provides a certificate signed by a Certificate Authority from the ca_file or ca_path. This applies to both server RPC and to the HTTPS API. By default, this is false, and Consul will not enforce the use of TLS or verify a client's authenticity.
verify_incoming_rpc - If set to true, Consul requires that all incoming RPC connections make use of TLS and that the client provides a certificate signed by a Certificate Authority from the ca_file or ca_path. By default, this is false, and Consul will not enforce the use of TLS or verify a client's authenticity.
verify_incoming_https - If set to true, Consul requires that all incoming HTTPS connections make use of TLS and that the client provides a certificate signed by a Certificate Authority from the ca_file or ca_path. By default, this is false, and Consul will not enforce the use of TLS or verify a client's authenticity. To enable the HTTPS API, you must define an HTTPS port via the ports configuration. By default, HTTPS is disabled.
verify_outgoing - If set to true, Consul requires that all outgoing connections make use of TLS and that the server provides a certificate that is signed by a Certificate Authority from the ca_file or ca_path. By default, this is false, and Consul will not make use of TLS for outgoing connections. This applies to clients and servers as both will make outgoing connections.
verify_server_hostname - If set to true, Consul verifies for all outgoing connections that the TLS certificate presented by the servers matches "server.<datacenter>.<domain>" hostname. This implies verify_outgoing. By default, this is false, and Consul does not verify the hostname of the certificate, only that it is signed by a trusted CA. This setting is important to prevent a compromised client from being restarted as a server, and thus being able to perform a MITM attack or to be added as a Raft peer. This is new in 0.5.1.
watches - Watches is a list of watch specifications which allow an external process to be automatically invoked when a particular data view is updated. See the watch documentation for more detail. Watches can be modified when the configuration is reloaded.

Ports Used

Consul requires up to 6 different ports to work properly, some on TCP, UDP, or both protocols. Below we document the requirements for each port.

Server RPC (Default 8300). This is used by servers to handle incoming requests from other agents. TCP only.
Serf LAN (Default 8301). This is used to handle gossip in the LAN. Required by all agents. TCP and UDP.
Serf WAN (Default 8302). This is used by servers to gossip over the WAN to other servers. TCP and UDP. As of Consul 0.8, it is recommended to enable connection between servers through port 8302 for both TCP and UDP on the LAN interface as well for the WAN Join Flooding feature. See also: Consul 0.8.0 CHANGELOG and GH-3058
CLI RPC (Default 8400). This is used by all agents to handle RPC from the CLI, but is deprecated in Consul 0.8 and later. TCP only. In Consul 0.8 all CLI commands were changed to use the HTTP API and the RPC interface was completely removed.
HTTP API (Default 8500). This is used by clients to talk to the HTTP API. TCP only.
DNS Interface (Default 8600). Used to resolve DNS queries. TCP and UDP.

Reloadable Configuration

Reloading configuration does not reload all configuration items. The items which are reloaded include:

Log level
Checks
Services
Watches
HTTP Client Address
Node Metadata

75 KiB Raw Blame History