Commit Graph

71 Commits (a1cb79b1f8f24f245a78d173613658b79f19b86b)

Author SHA1 Message Date
Freddy 2d633ed804 Fixup discovery chain handling in transparent mode (#10168)
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>

Previously we would associate the address of a discovery chain target
with the discovery chain's filter chain. This was broken for a few reasons:

- If the upstream is a virtual service, the client proxy has no way of
dialing it because virtual services are not targets of their discovery
chains. The targets are distinct services. This is addressed by watching
the endpoints of all upstream services, not just their discovery chain
targets.

- If multiple discovery chains resolve to the same target, that would
lead to multiple filter chains attempting to match on the target's
virtual IP. This is addressed by only matching on the upstream's virtual
IP.

NOTE: this implementation requires an intention to the redirecting
virtual service and not just to the final destination. This is how
we can know that the virtual service is an upstream to watch.

A later PR will look into traversing discovery chains when computing
upstreams so that intentions are only required to the discovery chain
targets.
2021-05-04 14:46:53 +00:00
Freddy c652580b5b Rename "cluster" config entry to "mesh" (#10127)
This config entry is being renamed primarily because in k8s the name
cluster could be confusing given that the config entry applies across
federated datacenters.

Additionally, this config entry will only apply to Consul as a service
mesh, so the more generic "cluster" name is not needed.
2021-04-28 22:14:03 +00:00
freddygv 7bd51ff536 Replace TransparentProxy bool with ProxyMode
This PR replaces the original boolean used to configure transparent
proxy mode. It was replaced with a string mode that can be set to:

- "": Empty string is the default for when the setting should be
defaulted from other configuration like config entries.
- "direct": Direct mode is how applications originally opted into the
mesh. Proxy listeners need to be dialed directly.
- "transparent": Transparent mode enables configuring Envoy as a
transparent proxy. Traffic must be captured and redirected to the
inbound and outbound listeners.

This PR also adds a struct for transparent proxy specific configuration.
Initially this is not stored as a pointer. Will revisit that decision
before GA.
2021-04-12 09:35:14 -06:00
freddygv b21224a4c8 PR comments 2021-04-08 11:16:03 -06:00
freddygv 49a4a78fd5 Ensure mesh gateway mode override is set for upstreams for intentions 2021-04-07 09:32:48 -06:00
freddygv 5140c3e51f Finish resolving upstream defaults in proxycfg 2021-04-07 09:32:48 -06:00
R.B. Boyer 499fee73b3
connect: add toggle to globally disable wildcard outbound network access when transparent proxy is enabled (#9973)
This adds a new config entry kind "cluster" with a single special name "cluster" where this can be controlled.
2021-04-06 13:19:59 -05:00
freddygv eb1e0a1751 Cancel watch on all errors 2021-03-17 21:44:14 -06:00
freddygv f4f45af6d0 Merge master and fix upstream config protocol defaulting 2021-03-17 21:13:40 -06:00
freddygv 0da8702f34 PR comments 2021-03-17 16:18:56 -06:00
freddygv a54d6a9010 Update proxycfg for transparent proxy 2021-03-17 13:40:39 -06:00
Daniel Nephin f40b76af2d proxycfg: use rpcclient/health.Client instead of passing around cache name
This should allow us to swap out the implementation with something other
than `agent/cache` without making further code changes.
2021-03-12 11:46:04 -05:00
Daniel Nephin 906834ce8e proxycfg: Use streaming in connect state 2021-03-12 11:35:42 -05:00
freddygv ec5f75776b Update comments on avoiding proxycfg deadlock 2021-02-08 09:45:45 -07:00
freddygv 6e443e5536 Retry send after timer fires, in case no updates occur 2021-02-05 18:00:59 -07:00
freddygv 95e7641faa Update proxycfg logging, labels were already attached 2021-02-05 15:14:49 -07:00
freddygv 5ba14ad41d Add trace logs to proxycfg state runner and xds srv 2021-02-02 12:26:38 -07:00
freddygv 37190c0d0d Avoid potential deadlock using non-blocking send
Deadlock scenario:
    1. Due to scheduling, the state runner sends one snapshot into
    snapCh and then attempts to send a second. The first send succeeds
    because the channel is buffered, but the second blocks.
    2. Separately, Manager.Watch is called by the xDS server after
    getting a discovery request from Envoy. This function acquires the
    manager lock and then blocks on receiving the CurrentSnapshot from
    the state runner.
    3. Separately, there is a Manager goroutine that reads the snapshots
    from the channel in step 1. These reads are done to notify proxy
    watchers, but they require holding the manager lock. This goroutine
    goes to acquire that lock, but can't because it is held by step 2.

Now, the goroutine from step 3 is waiting on the one from step 2 to
release the lock. The goroutine from step 2 won't release the lock until
the goroutine in step 1 advances. But the goroutine in step 1 is waiting
for the one in step 3. Deadlock.

By making this send non-blocking step 1 above can proceed. The coalesce
timer will be reset and a new valid snapshot will be delivered after it
elapses or when one is requested by xDS.
2021-02-02 11:31:14 -07:00
freddygv 7fd518ff1d Merge master 2020-09-14 16:17:43 -06:00
freddygv 87541ab80a Fix type assertion 2020-09-14 16:12:21 -06:00
R.B. Boyer 74d5df7c7a
xds: use envoy's rbac filter to handle intentions entirely within envoy (#8569) 2020-08-27 12:20:58 -05:00
Daniel Nephin 5afcf5c1bc
Merge pull request #8034 from hashicorp/dnephin/add-linter-staticcheck-4
ci: enable SA4006 staticcheck check and add ineffassign
2020-06-17 12:16:02 -04:00
Daniel Nephin 068b43df90 Enable gofmt simplify
Code changes done automatically with 'gofmt -s -w'
2020-06-16 13:21:11 -04:00
Daniel Nephin cb050b280c ci: enable SA4006 staticcheck check
And fix the 'value not used' issues.

Many of these are not bugs, but a few are tests not checking errors, and
one appears to be a missed error in non-test code.
2020-06-16 13:10:11 -04:00
freddygv 19e3954603 Move compound service names to use ServiceName type 2020-06-12 13:47:43 -06:00
Freddy 166a8b2a58
Only pass one hostname via EDS and prefer healthy ones (#8084)
Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>

Currently when passing hostname clusters to Envoy, we set each service instance registered with Consul as an LbEndpoint for the cluster.

However, Envoy can only handle one per cluster:
[2020-06-04 18:32:34.094][1][warning][config] [source/common/config/grpc_subscription_impl.cc:87] gRPC config for type.googleapis.com/envoy.api.v2.Cluster rejected: Error adding/updating cluster(s) dc2.internal.ddd90499-9b47-91c5-4616-c0cbf0fc358a.consul: LOGICAL_DNS clusters must have a single locality_lb_endpoint and a single lb_endpoint, server.dc2.consul: LOGICAL_DNS clusters must have a single locality_lb_endpoint and a single lb_endpoint

Envoy is currently handling this gracefully by only picking one of the endpoints. However, we should avoid passing multiple to avoid these warning logs.

This PR:

* Ensures we only pass one endpoint, which is tied to one service instance.
* We prefer sending an endpoint which is marked as Healthy by Consul.
* If no endpoints are healthy we emit a warning and skip the cluster.
* If multiple unique hostnames are spread across service instances we emit a warning and let the user know which will be resolved.
2020-06-12 13:46:17 -06:00
Freddy 9ed325ba8b
Enable gateways to resolve hostnames to IPv4 addresses (#7999)
The DNS resolution will be handled by Envoy and defaults to LOGICAL_DNS. This discovery type can be overridden on a per-gateway basis with the envoy_dns_discovery_type Gateway Option.

If a service contains an instance with a hostname as an address we set the Envoy cluster to use DNS as the discovery type rather than EDS. Since both mesh gateways and terminating gateways route to clusters using SNI, whenever there is a mix of hostnames and IP addresses associated with a service we use the hostname + CDS rather than the IPs + EDS.

Note that we detect hostnames by attempting to parse the service instance's address as an IP. If it is not a valid IP we assume it is a hostname.
2020-06-03 15:28:45 -06:00
Daniel Nephin c88fae0aac ci: Add staticcheck and fix most errors
Three of the checks are temporarily disabled to limit the size of the
diff, and allow us to enable all the other checks in CI.

In a follow up we can fix the issues reported by the other checks one
at a time, and enable them.
2020-05-28 11:59:58 -04:00
Kyle Havlovitz b14696e32a
Standardize support for Tagged and BindAddresses in Ingress Gateways (#7924)
* Standardize support for Tagged and BindAddresses in Ingress Gateways

This updates the TaggedAddresses and BindAddresses behavior for Ingress
to match Mesh/Terminating gateways. The `consul connect envoy` command
now also allows passing an address without a port for tagged/bind
addresses.

* Update command/connect/envoy/envoy.go

Co-authored-by: Freddy <freddygv@users.noreply.github.com>

* PR comments

* Check to see if address is an actual IP address

* Update agent/xds/listeners.go

Co-authored-by: Freddy <freddygv@users.noreply.github.com>

* fix whitespace

Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
2020-05-21 09:08:12 -05:00
Chris Piraino a0e1f57ac2 Remove development log line 2020-05-08 20:24:18 -07:00
Chris Piraino 26f92e74f6 Compute all valid DNSSANs for ingress gateways
For DNSSANs we take into account the following and compute the
appropriate wildcard values:
- source datacenter
- namespaces
- alt domains
2020-05-08 20:23:17 -07:00
Chris Piraino 0bd5618cb2 Cleanup proxycfg for TLS
- Use correct enterprise metadata for finding config entry
- nil out cancel functions on config snapshot copy
- Look at HostsSet when checking validity
2020-05-07 10:22:57 -05:00
Kyle Havlovitz f14c54e25e Add TLS option and DNS SAN support to ingress config
xds: Only set TLS context for ingress listener when requested
2020-05-06 15:12:02 -05:00
Chris Piraino f40833d094 Allow Hosts field to be set on an ingress config entry
- Validate that this cannot be set on a 'tcp' listener nor on a wildcard
service.
- Add Hosts field to api and test in consul config write CLI
- xds: Configure envoy with user-provided hosts from ingress gateways
2020-05-06 15:06:13 -05:00
Kyle Havlovitz 711d1389aa Support multiple listeners referencing the same service in gateway definitions 2020-05-06 15:06:13 -05:00
Kyle Havlovitz 247f9eaf13 Allow ingress gateways to route traffic based on Host header
This commit adds the necessary changes to allow an ingress gateway to
route traffic from a single defined port to multiple different upstream
services in the Consul mesh.

To do this, we now require all HTTP requests coming into the ingress
gateway to specify a Host header that matches "<service-name>.*" in
order to correctly route traffic to the correct service.

- Differentiate multiple listener's route names by port
- Adds a case in xds for allowing default discovery chains to create a
  route configuration when on an ingress gateway. This allows default
  services to easily use host header routing
- ingress-gateways have a single route config for each listener
  that utilizes domain matching to route to different services.
2020-05-06 15:06:13 -05:00
Freddy 137a2c32c6
TLS Origination for Terminating Gateways (#7671) 2020-04-27 16:25:37 -06:00
freddygv eddd5bd73b PR comments 2020-04-27 11:08:41 -06:00
freddygv 6abc71f915 Skip filter chain creation if no client cert 2020-04-27 11:08:41 -06:00
freddygv 840d27a9d5 Un-nest switch in gateway update handler 2020-04-27 11:08:40 -06:00
freddygv 913b13f31f Add subset support 2020-04-27 11:08:40 -06:00
freddygv 24207226ca Add proxycfg state management for terminating-gateways 2020-04-27 11:07:06 -06:00
Kyle Havlovitz e9e8c0e730
Ingress Gateways for TCP services (#7509)
* Implements a simple, tcp ingress gateway workflow

This adds a new type of gateway for allowing Ingress traffic into Connect from external services.

Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
2020-04-16 14:00:48 -07:00
Chris Piraino 584f90bbeb
Fix flapping of mesh gateway connect-service watches (#7575) 2020-04-02 10:12:13 -05:00
R.B. Boyer 6adad71125
wan federation via mesh gateways (#6884)
This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch:

There are several distinct chunks of code that are affected:

* new flags and config options for the server

* retry join WAN is slightly different

* retry join code is shared to discover primary mesh gateways from secondary datacenters

* because retry join logic runs in the *agent* and the results of that
  operation for primary mesh gateways are needed in the *server* there are
  some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur
  at multiple layers of abstraction just to pass the data down to the right
  layer.

* new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers

* the function signature for RPC dialing picked up a new required field (the
  node name of the destination)

* several new RPCs for manipulating a FederationState object:
  `FederationState:{Apply,Get,List,ListMeshGateways}`

* 3 read-only internal APIs for debugging use to invoke those RPCs from curl

* raft and fsm changes to persist these FederationStates

* replication for FederationStates as they are canonically stored in the
  Primary and replicated to the Secondaries.

* a special derivative of anti-entropy that runs in secondaries to snapshot
  their local mesh gateway `CheckServiceNodes` and sync them into their upstream
  FederationState in the primary (this works in conjunction with the
  replication to distribute addresses for all mesh gateways in all DCs to all
  other DCs)

* a "gateway locator" convenience object to make use of this data to choose
  the addresses of gateways to use for any given RPC or gossip operation to a
  remote DC. This gets data from the "retry join" logic in the agent and also
  directly calls into the FSM.

* RPC (`:8300`) on the server sniffs the first byte of a new connection to
  determine if it's actually doing native TLS. If so it checks the ALPN header
  for protocol determination (just like how the existing system uses the
  type-byte marker).

* 2 new kinds of protocols are exclusively decoded via this native TLS
  mechanism: one for ferrying "packet" operations (udp-like) from the gossip
  layer and one for "stream" operations (tcp-like). The packet operations
  re-use sockets (using length-prefixing) to cut down on TLS re-negotiation
  overhead.

* the server instances specially wrap the `memberlist.NetTransport` when running
  with gateway federation enabled (in a `wanfed.Transport`). The general gist is
  that if it tries to dial a node in the SAME datacenter (deduced by looking
  at the suffix of the node name) there is no change. If dialing a DIFFERENT
  datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh
  gateways to eventually end up in a server's :8300 port.

* a new flag when launching a mesh gateway via `consul connect envoy` to
  indicate that the servers are to be exposed. This sets a special service
  meta when registering the gateway into the catalog.

* `proxycfg/xds` notice this metadata blob to activate additional watches for
  the FederationState objects as well as the location of all of the consul
  servers in that datacenter.

* `xds:` if the extra metadata is in place additional clusters are defined in a
  DC to bulk sink all traffic to another DC's gateways. For the current
  datacenter we listen on a wildcard name (`server.<dc>.consul`) that load
  balances all servers as well as one mini-cluster per node
  (`<node>.server.<dc>.consul`)

* the `consul tls cert create` command got a new flag (`-node`) to help create
  an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 15:59:02 -05:00
Lars Lehtonen 6bcd596539
agent/proxycfg: fix dropped error in state.initWatchesMeshGateway() (#7267) 2020-02-18 14:41:01 +01:00
Matt Keeler 9e5fd7f925
OSS Changes for various config entry namespacing bugs (#7226) 2020-02-06 10:52:25 -05:00
Matt Keeler dfb0177dbc
Testing updates to support namespaced testing of the agent/xds… (#7185)
* Various testing updates to support namespaced testing of the agent/xds package

* agent/proxycfg package updates to support better namespace testing
2020-02-03 09:26:47 -05:00
Chris Piraino 401221de58
Allow users to configure either unstructured or JSON logging (#7130)
* hclog Allow users to choose between unstructured and JSON logging
2020-01-28 17:50:41 -06:00
Matt Keeler c09693e545
Updates to Config Entries and Connect for Namespaces (#7116) 2020-01-24 10:04:58 -05:00