11768 Commits (25fe12053a0d469f48cfbf37cae6dce85d204bcb)

 

All Branches   

Search

Author	SHA1	Message	Date
Preetha	25fe12053a	Merge pull request #8056 from hashicorp/docs-helm-survey ... Update banner.js to call out helm chart survey	5 years ago
Preetha	62b894a2d6	fix link	5 years ago
Daniel Nephin	c66c533d73	Merge pull request #7964 from hashicorp/dnephin/remove-patch-slice-of-maps-forward-compat ... config: Use HookWeakDecodeFromSlice in place of PatchSliceOfMaps	5 years ago
Preetha	7983ab0fce	Update banner.js to call out helm chart survey	5 years ago
Daniel Nephin	75cbbe2702	config: add HookWeakDecodeFromSlice ... Currently opaque config blocks (config entries, and CA provider config) are modified by PatchSliceOfMaps, making it impossible for these opaque config sections to contain slices of maps. In order to fix this problem, any lazy-decoding of these blocks needs to support weak decoding of []map[string]interface{} to a struct type before PatchSliceOfMaps is replaces. This is necessary because these config blobs are persisted, and during an upgrade an older version of Consul could read one of the new configuration values, which would cause an error. To support the upgrade path, this commit first introduces the new hooks for weak decoding of []map[string]interface{} and uses them only in the lazy-decode paths. That way, in a future release, new style configuration will be supported by the older version of Consul. This decode hook has a number of advantages: 1. It no longer panics. It allows mapstructure to report the error 2. It no longer requires the user to declare which fields are slices of structs. It can deduce that information from the 'to' value. 3. It will make it possible to preserve opaque configuration, allowing for structured opaque config.	5 years ago
Hans Hasselberg	98eea08d3b	Tokens converted from legacy ACLs get their Hash computed (#8047) ... * Fixes #5606: Tokens converted from legacy ACLs get their Hash computed This allows new style token replication to work for legacy tokens as well when they change. * tests: fix timestamp comparison Co-authored-by: Matt Keeler <mjkeeler7@gmail.com>	5 years ago
Chris Piraino	1a853fc954	Always require Host header values for http services (#7990) ... Previously, we did not require the 'service-name.*' host header value when on a single http service was exposed. However, this allows a user to get into a situation where, if they add another service to the listener, suddenly the previous service's traffic might not be routed correctly. Thus, we always require the Host header, even if there is only 1 service. Also, we add the make the default domain matching more restrictive by matching "service-name.ingress.*" by default. This lines up better with the namespace case and more accurately matches the Consul DNS value we expect people to use in this case.	5 years ago
Blake Covarrubias	dd1e4ffd0d	docs: Fix rendering of markdown on performance page ... Fix issue with markdown not being rendered on /docs/install/performance.mdx. Resolves #8049	5 years ago
Hans Hasselberg	c7e6c9ebec	http: use default minsize for gzip handler. (#7354) ... Fixes #6306	5 years ago
Hans Hasselberg	72f92ae7ca	agent: add option to disable agent cache for HTTP endpoints (#8023) ... This allows the operator to disable agent caching for the http endpoint. It is on by default for backwards compatibility and if disabled will ignore the url parameter `cached`.	5 years ago
Krastin	9262d7a79a	website: fix a link in docs/agent/options ... fixing the link to gopsutil in the -disable-host-node-id option text body	5 years ago
Jeff Escalante	9977c1df80	a few more naming adjustments	5 years ago
Jeff Escalante	f9051298c8	change page path, add redirect	5 years ago
Peter M	45f43476e8	Update Homepage Use Case Name and Link ... resubmitting this PR to include a link change.	5 years ago
Peter M	8df640401b	Updating NMA use case to reflect new name ... Recently changed Network Middleware Automation use case to Network Infrastructure Automation, adding changes to the site to reflect this.	5 years ago
Hans Hasselberg	5281cb74db	Setup intermediate_pki_path on secondary when using vault (#8001) ... Make sure to mount vault backend for intermediate_pki_path on secondary dc.	5 years ago
R.B. Boyer	fed7489a37	Use linkmode=external for the arm builds (#8029) ... This gets around some issues regarding too large plt offsets when compiling with CGO Co-authored-by: Matt Keeler <mjkeeler7@gmail.com>	5 years ago
John Cowen	439ae6b4bf	ui: Blocking with filtering intentions amends (#8027) ... * ui: Now intentions use blocking queries invalidation isn't needed * ui: Ensure reconciliation doesn't happen when filtering for intentions	5 years ago
R.B. Boyer	9cfa4a3fc9	tests: ensure that the ServiceExists helper function normalizes entmeta (#8025) ... This fixes a unit test failure over in enterprise due to https://github.com/hashicorp/consul/pull/7384	5 years ago
R.B. Boyer	b88bd6660e	server: don't activate federation state replication or anti-entropy until all servers are running 1.8.0+ (#8014)	5 years ago
Hans Hasselberg	dfcf45c6cf	tests: use constructor instead init (#8024)	5 years ago
Alexander Mykolaichuk	9fa605f077	fixed links (#8020)	5 years ago
John Cowen	7dd7fc566d	Merge pull request #8022 from hashicorp/ui/bugfix/switch-help-icons ... ui: Switch help menu icons to use the correct icons	5 years ago
John Cowen	8a586c04e6	ui: Switch help menu icons to use the correct icons	5 years ago
Pierre Souchay	9813ae512b	checks: when a service does not exists in an alias, consider it failing (#7384) ... In current implementation of Consul, check alias cannot determine if a service exists or not. Because a service without any check is semantically considered as passing, so when no healthchecks are found for an agent, the check was considered as passing. But this make little sense as the current implementation does not make any difference between: * a non-existing service (passing) * a service without any check (passing as well) In order to make it work, we have to ensure that when a check did not find any healthcheck, the service does indeed exists. If it does not, lets consider the check as failing.	5 years ago
Hans Hasselberg	0f343332da	Merge pull request #7966 from hashicorp/pool_improvements ... Agent connection pool cleanup	5 years ago
Freddy	891a0029b6	Update CHANGELOG.md	5 years ago
Freddy	9ed325ba8b	Enable gateways to resolve hostnames to IPv4 addresses (#7999) ... The DNS resolution will be handled by Envoy and defaults to LOGICAL_DNS. This discovery type can be overridden on a per-gateway basis with the envoy_dns_discovery_type Gateway Option. If a service contains an instance with a hostname as an address we set the Envoy cluster to use DNS as the discovery type rather than EDS. Since both mesh gateways and terminating gateways route to clusters using SNI, whenever there is a mix of hostnames and IP addresses associated with a service we use the hostname + CDS rather than the IPs + EDS. Note that we detect hostnames by attempting to parse the service instance's address as an IP. If it is not a valid IP we assume it is a hostname.	5 years ago
Kevin Pruett	9b0d0de178	Merge pull request #8002 from pruett/pruett.quickfix-acl-docs ... Add newline to fix rendering bug	5 years ago
Jono Sosulska	66ee9c3bb2	Updating Stopping Agent Section (#8016) ... Fixes #6935 to clarify agent behavior.	5 years ago
Daniel Nephin	b5dc84757d	Merge pull request #8017 from hashicorp/dnephin/increase-lint-timeout ... ci: Increase lint timeout	5 years ago
Daniel Nephin	5c2a1574aa	Increase lint timeout ... We occasionally see the lint job fail due to this timeout. Likely when the node running lint is under heavy load, because normally it runs much faster. This commit increases the timeout substantially to work around that problem.	5 years ago
Kevin Pruett	bf0b5055f1	Add newline to fix rendering bug	5 years ago
R.B. Boyer	4d083103e2	fix some flaky snapshot tests (#8015)	5 years ago
John Cowen	bdb55d7825	Merge pull request #8013 from hashicorp/ui-staging ... ui: UI Release Merge (1.8-beta-3: ui-staging merge)	5 years ago
Daniel Nephin	3362136c1e	Merge pull request #8008 from hashicorp/dnephin/fix-capture-logs-in-envoy-integration-test ... ci: fix log capture for envoy integration tests	5 years ago
John Cowen	7949410208	ui: Add ability to sort service based on health (#7989) ... * ui: Add ability to sort service based on health * ui: Move custom sorting to sort/comparator Service/Helper (like search) This moves custom sorting to use the same pattern as custom searching. * Remove old Controller based comparator	5 years ago
Kenia	d295d976ce	ui: Customize link for an Upstream in a different namespace as the ingress gateway (#8006) ... * Add configuration default value for findGatewayBySlug * Customize link for an Upstream in a different nspace as the ingress gateway	5 years ago
John Cowen	b0f38fe899	ui: Add an Address copy button to the service instance page (#7977) ... * ui: Add an Address copy button to the service instance page * ui: Fallback to Node Address if no Service Address is configured	5 years ago
John Cowen	002797af82	ui: Remove WithSearching mixin, use helpers instead (#7961) ... * ui: Remove WithSearching mixin, use composable helpers instead	5 years ago
Kenia	d459bfd81c	ui: Add blocking queries to gateways (#7967) ... * Remove gateway endpoint adapter, model, and serializer and tests * Update service tests to handle gateway-services-nodes * Upgrade consul-api-double to 2.15.2 * Add a fairly temporary shouldReconcile method Co-authored-by: John Cowen <jcowen@hashicorp.com>	5 years ago
John Cowen	12b1bc28b4	ui: SSO Icon cleanup (#7959) ... 1. Removes all icons not supported by the backend 2. Adds other icons supported by the backend 3. If there is no icon available don't add CSS positioning for one	5 years ago
John Cowen	94dd1849b4	ui: New Empty States (#7940) ... * ui: CSS and component changes to the <EmptyState /> component * ui: Reset the auth-form component back to its initial state Moving forwards we are going to have the auth-form on the page all the time, even when logged in (for relogging in purposes). This means the auth-form will not always be removed from the DOM when you log in. This sets the form back to its idle state before calling onsubmit * ui: Make a public api for modal-dialog with a single close method * ui : Move cache reset somewhere that makes more sense, + single refresh 1. Centralize cache resetting elsewhere, for now the store makes most sense, although I would prefer the Repository class, so using the store is temporary 2. We only need to refresh on login once, unless we have a differing nspace * ui: Ensure visibilitychange events are cleaned up * ui: Only cache DataSource data if we have any, + only clear the cache * ui: Add the modal login dialog to both unauth and auth views This means we can 'relogin' when already logged in * ui: Add new empty states * ui: CSS Tweaks * Remove marketing grays	5 years ago
Kenia	c4b2fcbd38	ui: Create Tags & Meta tab (#7954)	5 years ago
Kenia	8077a41f42	ui: Make only existing services in Upstreams linkabled with hover effect (#7943) ... * Create service/exist helper to be used in ListCollection list items * Make only existing services in Upstreams linkabled with hover effect	5 years ago
John Cowen	7e1e6e44c3	ui: remove some components/javascript we are no longer using (#7941)	5 years ago
Kenia	91b22f21ba	ui: Implement EmberTooltips to Upstreams (#7930) ... * Add ember-tooltips addon * Create Tooltip component with styling and test * Implement Tooltip into Upstreams	5 years ago
John Cowen	5d77ba076a	ui: Blink/Webkit input[type=password] workaround (#7929) ... It seems that blink/webkit browsers at least will leak memory when using input[type=password] inputs. This only affects us during testing as we 'refresh' the ember app ~1000 times without actually refreshing the browser. This means references to these HTML input elements mount up now that every single page/test has an input[password] on it. Following this change our memory usage during testing seems to have reduced by as much as 75%. During normal usage the single password element is only added to the page once per login/logout.	5 years ago
John Cowen	e7ce5a6e7b	ui: Slightly refactor %composite-rows and reuse ConsulServiceList component (#7886) ... * ui: Move individual component types into a single %composite-list plus 1. Removes all out separate CSS components (that match HTML components) to favour not having those separate for the moemnt at least 2. Reuses <ConsulServiceList /> component for Terminating Gateways > Linked Services * ui: Tweak breadcrumb spacing for '/' separator * Fix up the tests i.e. services per tab so we can call them all services	5 years ago
Matt Keeler	53ee863924	Update CHANGELOG.md	5 years ago