46 Commits (0a83964a5a04bca69cbf37fa0f6ee028f82b9951)

Author	SHA1	Message	Date
FFMMM	74eb257b1c	[sync ent] increase segment max limit to 4*64, make configurable (#1424) (#11795) ... * commit b6eb27563e747a78b7647d2b5da405e46364cc46 Author: FFMMM <FFMMM@users.noreply.github.com> Date: Thu Dec 9 13:53:44 2021 -0800 increase segment max limit to 4*64, make configurable (#1424) Signed-off-by: FFMMM <FFMMM@users.noreply.github.com> * fix: rename ent changelog file Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>	3 years ago
Daniel Nephin	0784a31e85	acl: remove init check for legacy anon token ... This token should always already be migrated from a previous version.	3 years ago
Daniel Nephin	5c40b717ed	config: move acl_ttl to DeprecatedConfig	3 years ago
Daniel Nephin	977f6d8888	config: move acl_{default,down}_policy to DeprecatedConfig	3 years ago
Daniel Nephin	d5498770fa	acl: make ACLDisabledTTL a constant ... This field was never user-configurable. We always overwrote the value with 120s from NonUserSource. However, we also never copied the value from RuntimeConfig to consul.Config, So the value in NonUserSource was always ignored, and we used the default value of 30s set by consul.DefaultConfig. All of this code is an unnecessary distraction because a user can not actually configure this value. This commit removes the fields and uses a constant value instad. Someone attempting to set acl.disabled_ttl in their config will now get an error about an unknown field, but previously the value was completely ignored, so the new behaviour seems more correct. We have to keep this field in the AutoConfig response for backwards compatibility, but the value will be ignored by the client, so it doesn't really matter what value we set.	3 years ago
Joshua Shanks	00ca99bf67	GH-8728 add raft default values	4 years ago
Daniel Nephin	32d36d0dd4	config: replace calls to config.NewBuilder with config.Load ... This is another incremental change to reduce config loading to a single small interface. All calls to NewBuilder can be replaced with Load.	4 years ago
Daniel Nephin	97a577502d	config: improve the interface of Load ... This commit reduces the interface to Load() a bit, in preparation for unexporting NewBuilder and having everything call Load. The three arguments are reduced to a single argument by moving the other two into the options struct. The three return values are reduced to two by moving the RuntimeConfig and Warnings into a LoadResult struct.	4 years ago
Daniel Nephin	0a44906fe3	config: Use LiteralSource for some defaults ... Using the LiteralSource makes it much easier to find default values, because an IDE reports the location of a default. With an HCL string they are harder to discover. Also removes unnecessary mapstructure.Decodes of constant values.	4 years ago
Matt Keeler	c048e86bb2	Switch to using the external autopilot module	4 years ago
Kit Patella	f5c51ae13b	remove consul.api.http from filtered metric prefixes	4 years ago
Kit Patella	52451cf846	Merge pull request #8271 from coignetp/http-metrics-label ... Use method and path as labels for http metrics	4 years ago
Paul Banks	d0c160130b	Merge pull request #8694 from hashicorp/ui-config-metrics ... Add config changes for UI metrics	4 years ago
R.B. Boyer	9801ef8eb1	agent: enable enable_central_service_config by default (#8746)	4 years ago
Paul Banks	526bab6164	Add config changes for UI metrics	4 years ago
Daniel Nephin	4297a8ba07	auto-config: Avoid the marshal/unmarshal cycle in auto-config ... Use a LiteralConfig and return a config.Config from translate.	4 years ago
Daniel Nephin	38980ebb4c	config: Make Source an interface ... This will allow us to accept config from auto-config without needing to go through a serialziation cycle.	4 years ago
Paul Coignet	a4e39c840b	Add default prefix_filter	4 years ago
Matt Keeler	3dbbd2d37d	Implement Client Agent Auto Config ... There are a couple of things in here. First, just like auto encrypt, any Cluster.AutoConfig RPC will implicitly use the less secure RPC mechanism. This drastically modifies how the Consul Agent starts up and moves most of the responsibilities (other than signal handling) from the cli command and into the Agent.	5 years ago
Daniel Nephin	77101eee82	config: rename Flags to BuilderOpts ... Flags is an overloaded term in this context. It generally is used to refer to command line flags. This struct, however, is a data object used as input to the construction. It happens to be partially populated by command line flags, but otherwise has very little to do with them. Renaming this struct should make the actual responsibility of this struct more obvious, and remove the possibility that it is confused with command line flags. This change is in preparation for adding additional fields to BuilderOpts.	5 years ago
R.B. Boyer	ffb9c7d6f7	acl: remove the deprecated `acl_enforce_version_8` option (#7991) ... Fixes #7292	5 years ago
Matt Keeler	cbe3a70f56	Update enterprise configurations to be in OSS ... This will emit warnings about the configs not doing anything but still allow them to be parsed. This also added the warnings for enterprise fields that we already had in OSS but didn’t change their enforcement behavior. For example, attempting to use a network segment will cause a hard error in OSS.	5 years ago
R.B. Boyer	6adad71125	wan federation via mesh gateways (#6884) ... This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.	5 years ago
Kim Ngo	a8f4123d37	agent/txn_endpoint: configure max txn request length (#7388) ... configure max transaction size separately from kv limit	5 years ago
Hans Hasselberg	cb0f94487c	config: increase http_max_conns_per_client default to 200 (#7289)	5 years ago
Hans Hasselberg	5531678e9e	Security fixes (#7182) ... * Mitigate HTTP/RPC Services Allow Unbounded Resource Usage Fixes #7159. Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com> Co-authored-by: Paul Banks <banks@banksco.de>	5 years ago
Matej Urbas	ce023359fe	agent: configurable MaxQueryTime and DefaultQueryTime. (#3777)	5 years ago
Freddy	fdd10dd8b8	Expose HTTP-based paths through Connect proxy (#6446) ... Fixes: #5396 This PR adds a proxy configuration stanza called expose. These flags register listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only listening on the loopback interface, while still accepting traffic from non Connect-enabled services. Under expose there is a boolean checks flag that would automatically expose all registered HTTP and gRPC check paths. This stanza also accepts a paths list to expose individual paths. The primary use case for this functionality would be to expose paths for third parties like Prometheus or the kubelet. Listeners for requests to exposed paths are be configured dynamically at run time. Any time a proxy, or check can be registered, a listener can also be created. In this initial implementation requests to these paths are not authenticated/encrypted.	5 years ago
Jeff Mitchell	94c73d0c92	Chunking support (#6172) ... * Initial chunk support This uses the go-raft-middleware library to allow for chunked commits to the KV	5 years ago
Pierre Souchay	0e907f5aa8	Support for maximum size for Output of checks (#5233) ... * Support for maximum size for Output of checks This PR allows users to limit the size of output produced by checks at the agent and check level. When set at the agent level, it will limit the output for all checks monitored by the agent. When set at the check level, it can override the agent max for a specific check but only if it is lower than the agent max. Default value is 4k, and input must be at least 1.	5 years ago
Hans Hasselberg	d35824b1fa	default to tls 1.2 as promised. (#5340)	6 years ago
Matt Keeler	18b29c45c4	New ACLs (#4791) ... This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.	6 years ago
Paul Banks	8336b5e6b9	XDS Server Config (#4730) ... * Config for the coming XDS server * Default gRPC to 8502 for -dev mode; Re-merge the command Info output that shows gRPC.	6 years ago
Paul Banks	1e7eace066	Add SidecarService Syntax sugar to Service Definition (#4686) ... * Added new Config for SidecarService in ServiceDefinitions. * WIP: all the code needed for SidecarService is written... none of it is tested other than config :). Need API updates too. * Test coverage for the new sidecarServiceFromNodeService method. * Test API registratrion with SidecarService * Recursive Key Translation 🤦 * Add tests for nested sidecar defintion arrays to ensure they are translated correctly * Use dedicated internal state rather than Service Meta for tracking sidecars for deregistration. Add tests for deregistration. * API struct for agent register. No other endpoint should be affected yet. * Additional test cases to cover updates to API registrations	6 years ago
Matt Keeler	0e0227792b	Gossip tuneables (#4444) ... Expose a few gossip tuneables for both lan and wan interfaces gossip_nodes gossip_interval probe_timeout probe_interval retransmit_mult suspicion_mult	6 years ago
Kyle Havlovitz	bc997688e3	connect/ca: update Consul provider to use new cross-sign CSR method	7 years ago
Kyle Havlovitz	6a2fc00997	connect/ca: add URI SAN support to the Vault provider	7 years ago
Mitchell Hashimoto	927b45bf91	agent/config: move ports to `ports` structure, update docs	7 years ago
Mitchell Hashimoto	9a62bce03b	agent/config: default connect enabled in dev mode ... This enables `consul agent -dev` to begin using Connect features with the built-in CA. I think this is expected behavior since you can imagine that new users would want to try. There is no real downside since we're just using the built-in CA.	7 years ago
Pierre Souchay	0b7f620dc6	Allow to control the number of A/AAAA Record returned by DNS ... This allows to have randomized resource records (i.e. each answer contains only one IP, but the IP changes every request) for A, AAAA records. It will fix https://github.com/hashicorp/consul/issues/3355 and https://github.com/hashicorp/consul/issues/3937 See https://github.com/hashicorp/consul/issues/3937#issuecomment-370610509 for details. It basically add a new option called `a_record_limit` and will not return more than a_record_limit when performing A, AAAA or ANY DNS requests. The existing `udp_answer_limit` option is still working but should be considered as deprecated since it works only with DNS clients not supporting EDNS.	7 years ago
James Phillips	46742a5041	Adds TODOs referencing #3744.	7 years ago
James Phillips	2892f91d0b	Copies the autopilot settings from the runtime config. ... Fixes #3730	7 years ago
James Phillips	bb12368eac	Makes RPC handling more robust when rolling servers. (#3561) ... * Adds client-side retry for no leader errors. This paves over the case where the client was connected to the leader when it loses leadership. * Adds a configurable server RPC drain time and a fail-fast path for RPCs. When a server leaves it gets removed from the Raft configuration, so it will never know who the new leader server ends up being. Without this we'd be doomed to wait out the RPC hold timeout and then fail. This makes things fail a little quicker while a sever is draining, and since we added a client retry AND since the server doing this has already shut down and left the Serf LAN, clients should retry against some other server. * Makes the RPC hold timeout configurable. * Reorders struct members. * Sets the RPC hold timeout default for test servers. * Bumps the leave drain time up to 5 seconds. * Robustifies retries with a simpler client-side RPC hold. * Reverts untended delete.	7 years ago
Frank Schröder	e84c2b2edd	Metrics service prefix (#3498) ... * metrics: replace statsite_prefix with service_prefix The metrics prefix isn't statsite specific and is in fact used for all metrics providers. Since we are deprecating fields anyway we should fix this one as well. Fixes #3293 * Updates docs and sorts telemetry section. * Renames to "metrics_prefix" to disambiguate with Consul services. * Updates the change log.	7 years ago
James Phillips	a75a779469	Renames `enable_ui` to `ui` to keep compatibility with existing configs.	7 years ago
Frank Schröder	12216583a1	New config parser, HCL support, multiple bind addrs (#3480) ... * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt	7 years ago