config: document more config options

agent/config/runtime.go

@@ -520,10 +520,54 @@ type RuntimeConfig struct {
 	// hcl: cert_file = string
 	CertFile string
 
+	// CheckUpdateInterval controls the interval on which the output of a health check
+	// is updated if there is no change to the state. For example, a check in a steady
+	// state may run every 5 second generating a unique output (timestamp, etc), forcing
+	// constant writes. This allows Consul to defer the write for some period of time,
+	// reducing the write pressure when the state is steady.
+	//
+	// See also: DiscardCheckOutput
+	//
+	// hcl: check_update_interval = "duration"
 	CheckUpdateInterval time.Duration
+
 	Checks []*structs.CheckDefinition
+
+	// ClientAddrs contains the list of ip addresses the DNS, HTTP and HTTPS
+	// endpoints will bind to if the endpoints are enabled (ports > 0) and the
+	// addresses are not overwritten.
+	//
+	// The ip addresses must be provided as a space separated list of ip
+	// addresses and go-sockaddr templates.
+	//
+	// Client addresses cannot contain UNIX socket addresses since a socket
+	// cannot be shared across multiple endpoints (no ports). To use UNIX
+	// sockets configure it in 'addresses'.
+	//
+	// hcl: client_addr = string
+	// flag: -client string
 	ClientAddrs []*net.IPAddr
+
+	// DNSAddrs contains the list of TCP and UDP addresses the DNS server will
+	// bind to. If the DNS endpoint is disabled (ports.dns <= 0) the list is
+	// empty.
+	//
+	// The ip addresses are taken from 'addresses.dns' which should contain a
+	// space separated list of ip addresses and/or go-sockaddr templates.
+	//
+	// If 'addresses.dns' was not provided the 'client_addr' addresses are
+	// used.
+	//
+	// The DNS server cannot be bound to UNIX sockets.
+	//
+	// hcl: client_addr = string addresses { dns = string } ports { dns = int }
 	DNSAddrs []net.Addr
+
+	// DNSPort is the port the DNS server listens on. The default is 8600.
+	// Setting this to a value <= 0 disables the endpoint.
+	//
+	// hcl: ports { dns = int }
+	// flags: -dns-port int
 	DNSPort int
 
 	// DataDir is the path to the directory where the local state is stored.
@@ -538,7 +582,15 @@ type RuntimeConfig struct {
 	// flag: -dev
 	DevMode bool
 
+	// DisableAnonymousSignature is used to turn off the anonymous signature
+	// send with the update check. This is used to deduplicate messages.
+	//
+	// hcl: disable_anonymous_signature = (true|false)
 	DisableAnonymousSignature bool
+
+	// DisableCoordinates controls features related to network coordinates.
+	//
+	// hcl: disable_coordinates = (true|false)
 	DisableCoordinates bool
 
 	// DisableHostNodeID will prevent Consul from using information from the
@@ -546,6 +598,7 @@ type RuntimeConfig struct {
 	// random ID instead.
 	//
 	// hcl: disable_host_node_id = (true|false)
+	// flag: -disable-host-node-id
 	DisableHostNodeID bool
 
 	// DisableKeyringFile disables writing the keyring to a file.
@@ -554,8 +607,25 @@ type RuntimeConfig struct {
 	// flag: -disable-keyring-file
 	DisableKeyringFile bool
 
+	// DisableRemoteExec is used to turn off the remote execution
+	// feature. This is for security to prevent unknown scripts from running.
+	//
+	// hcl: disable_remote_exec = (true|false)
 	DisableRemoteExec bool
+
+	// DisableUpdateCheck is used to turn off the automatic update and
+	// security bulletin checking.
+	//
+	// hcl: disable_update_check = (true|false)
 	DisableUpdateCheck bool
+
+	// DiscardCheckOutput is used to turn off storing and comparing the
+	// output of health checks. This reduces the write rate on the server
+	// for checks with highly volatile output. (reloadable)
+	//
+	// See also: CheckUpdateInterval
+	//
+	// hcl: discard_check_output = (true|false)
 	DiscardCheckOutput bool
 
 	// EnableACLReplication is used to turn on ACL replication when using
@@ -572,8 +642,26 @@ type RuntimeConfig struct {
 	// hcl: enable_debug = (true|false)
 	EnableDebug bool
 
+	// EnableScriptChecks controls whether health checks which execute
+	// scripts are enabled. This includes regular script checks and Docker
+	// checks.
+	//
+	// hcl: enable_script_checks = (true|false)
+	// flag: -enable-script-checks
 	EnableScriptChecks bool
+
+	// EnableSyslog is used to also tee all the logs over to syslog. Only supported
+	// on linux and OSX. Other platforms will generate an error.
+	//
+	// hcl: enable_syslog = (true|false)
+	// flag: -syslog
 	EnableSyslog bool
+
+	// EnableUI enables the statically-compiled assets for the Consul web UI and
+	// serves them at the default /ui/ endpoint automatically.
+	//
+	// hcl: enable_ui = (true|false)
+	// flag: -ui
 	EnableUI bool
 
 	// EncryptKey contains the encryption key to use for the Serf communication.
@@ -595,8 +683,20 @@ type RuntimeConfig struct {
 	EncryptVerifyOutgoing bool
 
 	HTTPAddrs []net.Addr
+
+	// HTTPPort is the port the HTTP server listens on. The default is 8500.
+	// Setting this to a value <= 0 disables the endpoint.
+	//
+	// hcl: ports { http = int }
+	// flags: -http-port int
 	HTTPPort int
+
 	HTTPSAddrs []net.Addr
+
+	// HTTPSPort is the port the HTTP server listens on. The default is -1.
+	// Setting this to a value <= 0 disables the endpoint.
+	//
+	// hcl: ports { https = int }
 	HTTPSPort int
 
 	// KeyFile is used to provide a TLS key that is used for serving TLS
@@ -605,6 +705,9 @@ type RuntimeConfig struct {
 	// hcl: key_file = string
 	KeyFile string
 
+	// ???
+	//
+	// hcl: leave_drain_time = "duration"
 	LeaveDrainTime time.Duration
 
 	// LeaveOnTerm controls if Serf does a graceful leave when receiving
@@ -643,9 +746,17 @@ type RuntimeConfig struct {
 	// flag: -non-voting-server
 	NonVotingServer bool
 
+	// PidFile is the file to store our PID in.
+	//
+	// hcl: pid_file = string
 	PidFile string
+
 	RPCAdvertiseAddr *net.TCPAddr
 	RPCBindAddr      *net.TCPAddr
+
+	// ???
+	//
+	// hcl: rpc_hold_timeout = "duration"
 	RPCHoldTimeout time.Duration
 
 	// RPCRateLimit and RPCMaxBurst control how frequently RPC calls are allowed
@@ -672,14 +783,75 @@ type RuntimeConfig struct {
 	// hcl: raft_protocol = int
 	RaftProtocol int
 
+	// ReconnectTimeoutLAN specifies the amount of time to wait to reconnect with
+	// another agent before deciding it's permanently gone. This can be used to
+	// control the time it takes to reap failed nodes from the cluster.
+	//
+	// hcl: reconnect_timeout = "duration"
 	ReconnectTimeoutLAN time.Duration
+
+	// ReconnectTimeoutWAN specifies the amount of time to wait to reconnect with
+	// another agent before deciding it's permanently gone. This can be used to
+	// control the time it takes to reap failed nodes from the cluster.
+	//
+	// hcl: reconnect_timeout = "duration"
 	ReconnectTimeoutWAN time.Duration
+
+	// RejoinAfterLeave controls our interaction with the cluster after leave.
+	// When set to false (default), a leave causes Consul to not rejoin
+	// the cluster until an explicit join is received. If this is set to
+	// true, we ignore the leave, and rejoin the cluster on start.
+	//
+	// hcl: rejoin_after_leave = (true|false)
+	// flag: -rejoin
 	RejoinAfterLeave bool
+
+	// RetryJoinIntervalLAN specifies the amount of time to wait in between join
+	// attempts on agent start. The minimum allowed value is 1 second and
+	// the default is 30s.
+	//
+	// hcl: retry_join = "duration"
 	RetryJoinIntervalLAN time.Duration
+
+	// RetryJoinIntervalWAN specifies the amount of time to wait in between join
+	// attempts on agent start. The minimum allowed value is 1 second and
+	// the default is 30s.
+	//
+	// hcl: retry_join_wan = "duration"
 	RetryJoinIntervalWAN time.Duration
+
+	// RetryJoinLAN is a list of addresses and/or go-discover expressions to
+	// join with retry enabled. See
+	// https://www.consul.io/docs/agent/options.html#cloud-auto-joining for
+	// details.
+	//
+	// hcl: retry_join = []string
+	// flag: -retry-join string -retry-join string
 	RetryJoinLAN []string
+
+	// RetryJoinMaxAttemptsLAN specifies the maximum number of times to retry
+	// joining a host on startup. This is useful for cases where we know the
+	// node will be online eventually.
+	//
+	// hcl: retry_max = int
+	// flag: -retry-max int
 	RetryJoinMaxAttemptsLAN int
+
+	// RetryJoinMaxAttemptsWAN specifies the maximum number of times to retry
+	// joining a host on startup. This is useful for cases where we know the
+	// node will be online eventually.
+	//
+	// hcl: retry_max_wan = int
+	// flag: -retry-max-wan int
 	RetryJoinMaxAttemptsWAN int
+
+	// RetryJoinWAN is a list of addresses and/or go-discover expressions to
+	// join -wan with retry enabled. See
+	// https://www.consul.io/docs/agent/options.html#cloud-auto-joining for
+	// details.
+	//
+	// hcl: retry_join_wan = []string
+	// flag: -retry-join-wan string -retry-join-wan string
 	RetryJoinWAN []string
 
 	// SegmentName is the network segment for this client to join.
@@ -737,6 +909,10 @@ type RuntimeConfig struct {
 
 	ServerPort int
 	Services   []*structs.ServiceDefinition
+
+	// Minimum Session TTL.
+	//
+	// hcl: session_ttl_min = "duration"
 	SessionTTLMin time.Duration
 
 	// SkipLeaveOnInt controls if Serf skips a graceful leave when
@@ -746,8 +922,26 @@ type RuntimeConfig struct {
 	// hcl: skip_leave_on_interrupt = (true|false)
 	SkipLeaveOnInt bool
 
+	// StartJoinLAN is a list of addresses to attempt to join -wan when the
+	// agent starts. If Serf is unable to communicate with any of these
+	// addresses, then the agent will error and exit.
+	//
+	// hcl: start_join = []string
+	// flag: -join string -join string
 	StartJoinAddrsLAN []string
+
+	// StartJoinWAN is a list of addresses to attempt to join -wan when the
+	// agent starts. If Serf is unable to communicate with any of these
+	// addresses, then the agent will error and exit.
+	//
+	// hcl: start_join_wan = []string
+	// flag: -join-wan string -join-wan string
 	StartJoinAddrsWAN []string
+
+	// SyslogFacility is used to control where the syslog messages go
+	// By default, goes to LOCAL0
+	//
+	// hcl: syslog_facility = string
 	SyslogFacility string
 
 	// TLSCipherSuites is used to specify the list of supported ciphersuites.
@@ -808,9 +1002,29 @@ type RuntimeConfig struct {
 	// hcl: translate_wan_addrs = (true|false)
 	TranslateWANAddrs bool
 
+	// UIDir is the directory containing the Web UI resources.
+	// If provided, the UI endpoints will be enabled.
+	//
+	// hcl: ui_dir = string
+	// flag: -ui-dir string
 	UIDir string
+
+	// UnixSocketGroup contains the group of the file permissions when
+	// Consul binds to UNIX sockets.
+	//
+	// hcl: unix_sockets { group = string }
 	UnixSocketGroup string
+
+	// UnixSocketMode contains the mode of the file permissions when
+	// Consul binds to UNIX sockets.
+	//
+	// hcl: unix_sockets { mode = string }
 	UnixSocketMode string
+
+	// UnixSocketUser contains the user of the file permissions when
+	// Consul binds to UNIX sockets.
+	//
+	// hcl: unix_sockets { user = string }
 	UnixSocketUser string
 
 	// VerifyIncoming is used to verify the authenticity of incoming