Since dot is matching newline now, `l=~".+"` is "any non empty label
value", and #14144 added a specific method in the index for that so we
don't need to run the matcher on each one of the label values.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Simple follow-up to #13620. Modify `tsdb.PostingsForMatchers` to use the optimized tsdb.IndexReader.PostingsForLabelMatching method also for inverse matching.
Introduce method `PostingsForAllLabelValues`, to avoid changing the existing method.
The performance is much improved for a subset of the cases; there are up to
~60% CPU gains and ~12.5% reduction in memory usage.
Remove `TestReader_InversePostingsForMatcherHonorsContextCancel` since
`inversePostingsForMatcher` only passes `ctx` to `IndexReader` implementations now.
Signed-off-by: Arve Knudsen <arve.knudsen@gmail.com>
When handling recoded histogram chunks the min time of the chunk is
updated by mistake. It should only update when the chunk is completely new.
Otherwise the ongoing chunk's meta will be later than the previously
written samples in it.
Same bug as https://github.com/prometheus/prometheus/pull/14629
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
Shortcut for `.*` matches newlines as well.
Add preamble change ^(?s:
Add test
dotAll flag por al regex
Add and fix regex tests
Signed-off-by: Mario Fernandez <mariofer@redhat.com>
Add `HeadAndOOOQuerier` which iterates just once over series, then
where necessary merges chunks from in-order and out-of-order lists.
Add a ChunkQuerier for in-order and ooo together
Add copy-last-chunk behaviour to HeadAndOOOChunkReader
Out-of-order chunk IDs are distinguished from in-order by setting bit 23.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
The only call we have to LabelValuesFor() has an index.Postings, and we
expand it to pass to this method, which will iterate over the values.
That's a waste of resources: we can iterate on the index.Postings
directly.
If there's any downstream implementation that has a slice of series,
they can always do an index.ListPostings from them: doing that is
cheaper than expanding an abstract index.Postings.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* tsdb: check for context cancel before regex matching postings
Regex matching can be heavy if the regex takes a lot of cycles to
evaluate and we can get stuck evaluating postings for a long time
without this fix. The constant checkContextEveryNIterations=100
may be changed later.
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
Add method `PostingsForLabelMatching` to `tsdb.IndexReader`, to obtain postings for labels with a certain name and values accepted by a provided callback, and use it from `tsdb.PostingsForMatchers`.
The intention is to optimize regexp matcher paths, especially not having to load all label values before matching on them.
Plus tests, and refactor some `tsdb/index.Reader` methods.
Benchmarking shows memory reduction up to ~100%, and speedup of up to ~50%.
Signed-off-by: Arve Knudsen <arve.knudsen@gmail.com>
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
This PR is a reference implementation of the proposal described in #10420.
In addition to what described in #10420, in this PR I've introduced labels.StableHash(). The idea is to offer an hashing function which doesn't change over time, and that's used by query sharding in order to get a stable behaviour over time. The implementation of labels.StableHash() is the hashing function used by Prometheus before stringlabels, and what's used by Grafana Mimir for query sharding (because built before stringlabels was a thing).
Follow up work
As mentioned in #10420, if this PR is accepted I'm also open to upload another foundamental piece used by Grafana Mimir query sharding to accelerate the query execution: an optional, configurable and fast in-memory cache for the series hashes.
Signed-off-by: Marco Pracucci <marco@pracucci.com>
Optimize histogram iterators
Histogram iterators allocate new objects in the AtHistogram and
AtFloatHistogram methods, which makes calculating rates over long
ranges expensive.
In #13215 we allowed an existing object to be reused
when converting an integer histogram to a float histogram. This commit follows
the same idea and allows injecting an existing object in the AtHistogram and
AtFloatHistogram methods. When the injected value is nil, iterators allocate
new histograms, otherwise they populate and return the injected object.
The commit also adds a CopyTo method to Histogram and FloatHistogram which
is used in the BufferedIterator to overwrite items in the ring instead of making
new copies.
Note that a specialized HPoint pool is needed for all of this to work
(`matrixSelectorHPool`).
---------
Signed-off-by: Filip Petkovski <filip.petkovsky@gmail.com>
Co-authored-by: George Krajcsovits <krajorama@users.noreply.github.com>
Don't calculate postings beforehand: we may not need them. If all
matchers are for the requested label, we can just filter its values.
Also, if there are no values at all, no need to run any kind of
logic.
Also add more labelValuesWithMatchers benchmarks
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
When no samples are returned in a chunk because all the samples have
been deleted, the chunk iterator then stops without iterating through
any remaining chunks.
Signed-off-by: Fiona Liao <fiona.y.liao@gmail.com>
The ChunkReader interface's Chunk() has been changed to ChunkOrIterable().
This is a precursor to OOO native histogram support - with OOO native histograms, the chunks.Meta passed to Chunk() can result in multiple chunks being returned rather than just a single chunk (e.g. if oooMergedChunk has a counter reset in the middle).
To support this, ChunkOrIterable() requires either a single chunk or an iterable to be returned. If an iterable is returned, the caller has the responsibility of converting the samples from the iterable into possibly multiple chunks. The OOOHeadChunkReader now returns an iterable rather than a chunk to prepare for the native histograms case. Also as a beneficial side effect, oooMergedChunk and boundedChunk has been simplified as they only need to implement the Iterable interface now, not the full Chunk interface.
---------
Signed-off-by: Fiona Liao <fiona.y.liao@gmail.com>
Co-authored-by: George Krajcsovits <krajorama@users.noreply.github.com>
Return annotations (warnings and infos) from PromQL queries
This generalizes the warnings we have already used before (but only for problems with remote read) as "annotations".
Annotations can be warnings or infos (the latter could be false positives). We do not treat them different in the API for now and return them all as "warnings". It would be easy to distinguish them and return infos separately, should that appear useful in the future.
The new annotations are then used to create a lot of warnings or infos during PromQL evaluations. Partially these are things we have wanted for a long time (e.g. inform the user that they have applied `rate` to a metric that doesn't look like a counter), but the new native histograms have created even more needs for those annotations (e.g. if a query tries to aggregate float numbers with histograms).
The annotations added here are not yet complete. A prominent example would be a warning about a range too short for a rate calculation. But such a warnings is more tricky to create with good fidelity and we will tackle it later.
Another TODO is to take annotations into account when evaluating recording rules.
---------
Signed-off-by: Jeanette Tan <jeanette.tan@grafana.com>
* Apply matchers when fetching label values
Signed-off-by: Patrick Oyarzun <patrick.oyarzun@grafana.com>
* Avoid extra copying of label values
Signed-off-by: Patrick Oyarzun <patrick.oyarzun@grafana.com>
---------
Signed-off-by: Patrick Oyarzun <patrick.oyarzun@grafana.com>
Use AppendableGauge to detect corrupt chunk with gauge histograms.
Detect if first sample is a gauge but the chunk is not set up to contain
gauge histograms.
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
Signed-off-by: George Krajcsovits <krajorama@users.noreply.github.com>
Wiser coders than myself have come to the conclusion that a `switch`
statement is almost always superior to a statement that includes any
`else if`.
The exceptions that I have found in our codebase are just these two:
* The `if else` is followed by an additional statement before the next
condition (separated by a `;`).
* The whole thing is within a `for` loop and `break` statements are
used. In this case, using `switch` would require tagging the `for`
loop, which probably tips the balance.
Why are `switch` statements more readable?
For one, fewer curly braces. But more importantly, the conditions all
have the same alignment, so the whole thing follows the natural flow
of going down a list of conditions. With `else if`, in contrast, all
conditions but the first are "hidden" behind `} else if `, harder to
spot and (for no good reason) presented differently from the first
condition.
I'm sure the aforemention wise coders can list even more reasons.
In any case, I like it so much that I have found myself recommending
it in code reviews. I would like to make it a habit in our code base,
without making it a hard requirement that we would test on the CI. But
for that, there has to be a role model, so this commit eliminates all
`if else` occurrences, unless it is autogenerated code or fits one of
the exceptions above.
Signed-off-by: beorn7 <beorn@grafana.com>
We haven't updated golint-ci in our CI yet, but this commit prepares
for that.
There are a lot of new warnings, and it is mostly because the "revive"
linter got updated. I agree with most of the new warnings, mostly
around not naming unused function parameters (although it is justified
in some cases for documentation purposes – while things like mocks are
a good example where not naming the parameter is clearer).
I'm pretty upset about the "empty block" warning to include `for`
loops. It's such a common pattern to do something in the head of the
`for` loop and then have an empty block. There is still an open issue
about this: https://github.com/mgechev/revive/issues/810 I have
disabled "revive" altogether in files where empty blocks are used
excessively, and I have made the effort to add individual
`// nolint:revive` where empty blocks are used just once or twice.
It's borderline noisy, though, but let's go with it for now.
I should mention that none of the "empty block" warnings for `for`
loop bodies were legitimate.
Signed-off-by: beorn7 <beorn@grafana.com>
Oleg Zaytsev