prometheus

Commit Graph

Author	SHA1	Message	Date
Fiona Liao	c599d37668	Always return unknown hint for first sample in non-gauge histogram chunk (#15343 ) Always return unknown hint for first sample in non-gauge histogram chunk --------- Signed-off-by: Fiona Liao <fiona.liao@grafana.com> Co-authored-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>	2 weeks ago
Matthieu MOREL	af1a19fc78	enable errorf rule from perfsprint linter Signed-off-by: Matthieu MOREL <matthieu.morel35@gmail.com>	3 weeks ago
Bryan Boreham	e8c2d916ec	lint Signed-off-by: Bryan Boreham <bjboreham@gmail.com>	2 months ago
Bryan Boreham	648a668835	[PERF] Chunk encoding: combine timestamp writes Instead of a 2-bit write followed by a 14-bit write, do two 8-bit writes, which goes much faster since it avoids looping. Signed-off-by: Bryan Boreham <bjboreham@gmail.com>	2 months ago
Bryan Boreham	b9a9689aae	[PERF] Chunk encoding: simplify writeByte Rather than append a zero then set the value at that position, append the value. Signed-off-by: Bryan Boreham <bjboreham@gmail.com>	2 months ago
Bryan Boreham	b65f1b6560	TSDB: Improve xor-chunk benchmarks Benchmarks must do the same work N times. Run 3 cases, where the values are constant, vary a bit, and vary a lot. Also aim for 120 samples same as TSDB default. Signed-off-by: Bryan Boreham <bjboreham@gmail.com>	2 months ago
Antoine Pultier	d90d0976b5	fix(bstream/writeByte): ensure it appends only one byte (#14854 ) fix(bstream/writeByte): ensure it appends only one byte Signed-off-by: Antoine Pultier <antoine.pultier@sintef.no>	2 months ago
Nathan Baulch	50cd453c8f	chore: Fix typos (#14868 ) * Fix typos --------- Signed-off-by: Nathan Baulch <nathan.baulch@gmail.com>	3 months ago
Joshua Hesketh	f2064c7987	NH: Do not re-use spans between histograms (#14771 ) promql, tsdb (histograms): Do not re-use spans between histograms When multiple points exist with the same native histogram schemas they share their spans. This causes a problem when a native histogram (NH) schema is modified (for example, during a Sum) then the other NH's with the same spans are also modified. As such, we should create a new Span for each NH. This will ensure NH's interfaces are safe to use without considering the effect on other histograms. At the moment this doesn't present itself as a problem because in all aggregations and functions operating on native histograms they are copied by the promql query engine first. Signed-off-by: Joshua Hesketh <josh@nitrotech.org> --------- Signed-off-by: Joshua Hesketh <josh@nitrotech.org>	3 months ago
György Krajcsovits	a693dd19f2	Fix: chunkenc.MockSeriesIterator Starts its index from 0 , but users call Next() before first sample so it needs to start from -1 Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>	3 months ago
György Krajcsovits	98ecdf3589	Fix corrupting spans via iterator sharing Iterator may share spans without copy, so we always have to make a copy before modification - copy-on-write. Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>	4 months ago
György Krajcsovits	d2f6fa7289	Fix lint error Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>	4 months ago
György Krajcsovits	1b6d1366d8	Fix re-code histogram and chunk re-code conflict Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>	4 months ago
György Krajcsovits	aff089a014	Reproduce recoding bug with new and missing buckets Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>	4 months ago
George Krajcsovits	00ab05c3b9	Native histograms: fix spurios counter reset when merging recoded chunk to normal chunk (#14513 ) * chunkenc: allow missing empty buckets on histogram append Allow appending to chunks when the histogram to be added is missing some buckets, but the missing buckets are empty in the chunk. For example bucket at index 5 is present in the chunk, but its value is 0 and the new histogram doesn't have a bucket at index 5. This fixes an issue of merging chunks where one chunk was recoded to retroactively have some empty buckets in all the histograms and we are merging in a histogram that doesn't have the empty bucket (because it was not recoded yet). The operation alters the histogram that is being added, however this has already been the case when appending gauge histograms. Thus the test TestHistogramSeriesToChunks in storage package is changed to explicitly test what happened to the appended histogram - Compact(0) call is removed. The new expandIntSpansAndBuckets and expandFloatSpansAndBuckets functions are a merge of expandSpansForward and counterResetInAnyBucket and counterResetInAnyFloatBucket. Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>	4 months ago
Arve Knudsen	e410a215fb	Fix a couple of comments Signed-off-by: Arve Knudsen <arve.knudsen@gmail.com>	5 months ago
Jeanette Tan	9adc1699c3	fix according to code review Signed-off-by: Jeanette Tan <jeanette.tan@grafana.com>	6 months ago
Jeanette Tan	f028496133	Merge branch 'main' into nhcb Signed-off-by: Jeanette Tan <jeanette.tan@grafana.com>	7 months ago
Arve Knudsen	d699dc3c77	Fix language in docs and comments (#14041 ) Fix language in docs and comments --------- Signed-off-by: Arve Knudsen <arve.knudsen@gmail.com> Co-authored-by: Björn Rabenstein <github@rabenste.in>	7 months ago
Arve Knudsen	108a6bc9f6	tsdb/chunkenc.Pool: Refactor Get and Put Signed-off-by: Arve Knudsen <arve.knudsen@gmail.com>	7 months ago
György Krajcsovits	bcafa5f1f9	Merge remote-tracking branch 'upstream/main' into update-nhcb	7 months ago
Matthieu MOREL	6f595c6762	golangci-lint: enable whitespace linter (#13905 ) Signed-off-by: Matthieu MOREL <matthieu.morel35@gmail.com>	8 months ago
George Krajcsovits	4eab18abd6	[nhcb branch] Use single bit to differentiate between optimized bounds and floats (#13828 ) * Use single bit to differentiate between optimized bounds and floats Use one bit to decide what kind of data to read/write. This reduces storage need of floats from 72 bits to 65 bits and makes the integers store in 5 to 32 bits instead of 16. Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> Signed-off-by: Jeanette Tan <jeanette.tan@grafana.com> Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> Signed-off-by: Jeanette Tan <jeanette.tan@grafana.com> Signed-off-by: George Krajcsovits <krajorama@users.noreply.github.com> Co-authored-by: Jeanette Tan <jeanette.tan@grafana.com>	8 months ago
zenador	4acbb7dea6	Add custom buckets to native histogram chunks encoding (#13706 ) * add custom bounds to chunks encoding * change custom buckets schema number * rename custom bounds to custom values Signed-off-by: Jeanette Tan <jeanette.tan@grafana.com>	8 months ago
Filip Petkovski	583f3e587c	Optimize histogram iterators (#13340 ) Optimize histogram iterators Histogram iterators allocate new objects in the AtHistogram and AtFloatHistogram methods, which makes calculating rates over long ranges expensive. In #13215 we allowed an existing object to be reused when converting an integer histogram to a float histogram. This commit follows the same idea and allows injecting an existing object in the AtHistogram and AtFloatHistogram methods. When the injected value is nil, iterators allocate new histograms, otherwise they populate and return the injected object. The commit also adds a CopyTo method to Histogram and FloatHistogram which is used in the BufferedIterator to overwrite items in the ring instead of making new copies. Note that a specialized HPoint pool is needed for all of this to work (`matrixSelectorHPool`). --------- Signed-off-by: Filip Petkovski <filip.petkovsky@gmail.com> Co-authored-by: George Krajcsovits <krajorama@users.noreply.github.com>	10 months ago
Matthieu MOREL	8f6cf3aabb	tsdb: use Go standard errors Signed-off-by: Matthieu MOREL <matthieu.morel35@gmail.com>	12 months ago
Filip Petkovski	10a82f87fd	Enable reusing memory when converting between histogram types The 'ToFloat' method on integer histograms currently allocates new memory each time it is called. This commit adds an optional *FloatHistogram parameter that can be used to reuse span and bucket slices. It is up to the caller to make sure the input float histogram is not used anymore after the call. Signed-off-by: Filip Petkovski <filip.petkovsky@gmail.com>	12 months ago
Matthieu MOREL	9c4782f1cc	golangci-lint: enable testifylint linter (#13254 ) Signed-off-by: Matthieu MOREL <matthieu.morel35@gmail.com>	12 months ago
Fiona Liao	b8bcaef14d	Fix histogram append errors (#13201 ) * Fix histogram append errors We should check counterReset condition rather than okToAppend because if there's a counter reset, okToAppend is always set to false. Signed-off-by: Fiona Liao <fiona.y.liao@gmail.com>	1 year ago
Fiona Liao	5bee0cfce2	Change `ChunkReader.Chunk()` to `ChunkOrIterable()` The ChunkReader interface's Chunk() has been changed to ChunkOrIterable(). This is a precursor to OOO native histogram support - with OOO native histograms, the chunks.Meta passed to Chunk() can result in multiple chunks being returned rather than just a single chunk (e.g. if oooMergedChunk has a counter reset in the middle). To support this, ChunkOrIterable() requires either a single chunk or an iterable to be returned. If an iterable is returned, the caller has the responsibility of converting the samples from the iterable into possibly multiple chunks. The OOOHeadChunkReader now returns an iterable rather than a chunk to prepare for the native histograms case. Also as a beneficial side effect, oooMergedChunk and boundedChunk has been simplified as they only need to implement the Iterable interface now, not the full Chunk interface. --------- Signed-off-by: Fiona Liao <fiona.y.liao@gmail.com> Co-authored-by: George Krajcsovits <krajorama@users.noreply.github.com>	1 year ago
Matthieu MOREL	b60f9f801e	tsdb/chunkenc: use Go standard errors package Signed-off-by: Matthieu MOREL <matthieu.morel35@gmail.com>	1 year ago
Oleksandr Redko	fa90ca46e5	ci(lint): enable godot; append dot at the end of comments Signed-off-by: Oleksandr Redko <Oleksandr_Redko@epam.com>	1 year ago
Oleksandr Redko	8e5f0387a2	ci(lint): enable nolintlint and remove redundant comments (#12926 ) Signed-off-by: Oleksandr Redko <Oleksandr_Redko@epam.com>	1 year ago
György Krajcsovits	b2fa4d910a	Fix more counterResetInAnyBucket edgecases Case a) empty span is at the beginning of the spans. Case b) two consequtive empty spans with positive offsets. Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>	1 year ago
George Krajcsovits	b6f903b5f9	Fix handling of explicit counter reset header in histograms. (#12772 ) * Fix handling of explicit counter reset header in histograms. Explicit counter reset were being ignored. Also there was no unit test coverage. Add test case for the first sample in a chunk. Add test case for non first sample in chunk. Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> --------- Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>	1 year ago
Justin Lei	8ef7dfdeeb	Add a chunk size limit in bytes (#12054 ) Add a chunk size limit in bytes This creates a hard cap for XOR chunks of 1024 bytes. The limit for histogram chunk is also 1024 bytes, but it is a soft limit as a histogram has a dynamic size, and even a single one could be larger than 1024 bytes. This also avoids cutting new histogram chunks if the existing chunk has fewer than 10 histograms yet. In that way, we are accepting "jumbo chunks" in order to have at least 10 histograms in a chunk, allowing compression to kick in. Signed-off-by: Justin Lei <justin.lei@grafana.com>	1 year ago
Oleg Zaytsev	c810e7cae3	Fix typo in Appender.AppendHistogram() arg name Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>	1 year ago
George Krajcsovits	6cd2d1621f	Hide histogram chunk append and reset header internals (#12352 ) tsdb: Hide histogram chunk append and reset header internals Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> Signed-off-by: George Krajcsovits <krajorama@users.noreply.github.com>	1 year ago
György Krajcsovits	c6618729c9	Fix HistogramAppender.Appendable array out of bound error The code did not handle spans with 0 length properly. Spans with length zero are now skipped in the comparison. Span index check not done against length-1, since length is a unit32, thus subtracting 1 leads to 2^32, not -1. Fixes and unit tests for both integer and float histograms added. Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>	2 years ago
Matthieu MOREL	bae9a21200	Merge branch 'main' into linter/nilerr Signed-off-by: Matthieu MOREL <matthieu.morel35@gmail.com>	2 years ago
beorn7	5b53aa1108	style: Replace `else if` cascades with `switch` Wiser coders than myself have come to the conclusion that a `switch` statement is almost always superior to a statement that includes any `else if`. The exceptions that I have found in our codebase are just these two: * The `if else` is followed by an additional statement before the next condition (separated by a `;`). * The whole thing is within a `for` loop and `break` statements are used. In this case, using `switch` would require tagging the `for` loop, which probably tips the balance. Why are `switch` statements more readable? For one, fewer curly braces. But more importantly, the conditions all have the same alignment, so the whole thing follows the natural flow of going down a list of conditions. With `else if`, in contrast, all conditions but the first are "hidden" behind `} else if `, harder to spot and (for no good reason) presented differently from the first condition. I'm sure the aforemention wise coders can list even more reasons. In any case, I like it so much that I have found myself recommending it in code reviews. I would like to make it a habit in our code base, without making it a hard requirement that we would test on the CI. But for that, there has to be a role model, so this commit eliminates all `if else` occurrences, unless it is autogenerated code or fits one of the exceptions above. Signed-off-by: beorn7 <beorn@grafana.com>	2 years ago
beorn7	c3c7d44d84	lint: Adjust to the lint warnings raised by current versions of golint-ci We haven't updated golint-ci in our CI yet, but this commit prepares for that. There are a lot of new warnings, and it is mostly because the "revive" linter got updated. I agree with most of the new warnings, mostly around not naming unused function parameters (although it is justified in some cases for documentation purposes – while things like mocks are a good example where not naming the parameter is clearer). I'm pretty upset about the "empty block" warning to include `for` loops. It's such a common pattern to do something in the head of the `for` loop and then have an empty block. There is still an open issue about this: https://github.com/mgechev/revive/issues/810 I have disabled "revive" altogether in files where empty blocks are used excessively, and I have made the effort to add individual `// nolint:revive` where empty blocks are used just once or twice. It's borderline noisy, though, but let's go with it for now. I should mention that none of the "empty block" warnings for `for` loop bodies were legitimate. Signed-off-by: beorn7 <beorn@grafana.com>	2 years ago
Matthieu MOREL	fb3eb21230	enable gocritic, unconvert and unused linters Signed-off-by: Matthieu MOREL <matthieu.morel35@gmail.com>	2 years ago
Justin Lei	83f43982c9	Add support for native histograms to concreteSeriesIterator Signed-off-by: Justin Lei <justin.lei@grafana.com>	2 years ago
Abhijit Mukherjee	8f6d5dcd45	Fix: getting rid of EncOOOXOR chunk encoding (#12111 ) Signed-off-by: mabhi <abhijit.mukherjee@infracloud.io>	2 years ago
beorn7	1cfc8f65a3	histograms: Return actually useful counter reset hints This is a bit more conservative than we could be. As long as a chunk isn't the first in a block, we can be pretty sure that the previous chunk won't disappear. However, the incremental gain of returning NotCounterReset in these cases is probably very small and might not be worth the code complications. Wwith this, we now also pay attention to an explicitly set counter reset during ingestion. While the case doesn't show up in practice yet, there could be scenarios where the metric source knows there was a counter reset even if it might not be visible from the values in the histogram. It is also useful for testing. Signed-off-by: beorn7 <beorn@grafana.com>	2 years ago
beorn7	57c18420ab	histograms: General readability tweaks - Adjust doc comments to go1.19 style. - Break down some overly long lines. - Minor doc comment tweaks and fixes. - Some renaming. Some rationales for the last point: I have renamed “interjections” into “inserts”, mostly because it is shorter, and the word shows up a lot by now (and the concept is cryptic enough to not obfuscate it even more with abbreviations). I have also tried to find more descriptive naming for the “compare spans” functions. Signed-off-by: beorn7 <beorn@grafana.com>	2 years ago
Mingjie Shao	78d3c4e823	tsdb: Fixed typo in Histogram Signed-off-by: Mingjie Shao <com.jerryshao@jerryshao.com>	2 years ago
beorn7	6dcd03dbf3	tsdb: Add integer gauge histogram support This follows what #11783 has done for float gauge histograms. Signed-off-by: beorn7 <beorn@grafana.com>	2 years ago
Ganesh Vernekar	57bcbf1888	Merge pull request #11783 from codesome/gauge-histogram tsdb: Add gauge histogram support	2 years ago

1 2 3

143 Commits (d7c8177f56439ff2b5025a330481fb35786431a5)