prometheus

Commit Graph

Author	SHA1	Message	Date
Justin Lei	8ef7dfdeeb	Add a chunk size limit in bytes (#12054 ) Add a chunk size limit in bytes This creates a hard cap for XOR chunks of 1024 bytes. The limit for histogram chunk is also 1024 bytes, but it is a soft limit as a histogram has a dynamic size, and even a single one could be larger than 1024 bytes. This also avoids cutting new histogram chunks if the existing chunk has fewer than 10 histograms yet. In that way, we are accepting "jumbo chunks" in order to have at least 10 histograms in a chunk, allowing compression to kick in. Signed-off-by: Justin Lei <justin.lei@grafana.com>	1 year ago
George Krajcsovits	6cd2d1621f	Hide histogram chunk append and reset header internals (#12352 ) tsdb: Hide histogram chunk append and reset header internals Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> Signed-off-by: George Krajcsovits <krajorama@users.noreply.github.com>	1 year ago
György Krajcsovits	d4e355243a	tsdbutil/ChunkFromSamplesGeneric should not panic Add error handling instead. Prepares for #12352 Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>	1 year ago
George Krajcsovits	f5fcaa3872	Fix setting reset header to gauge histogram in seriesToChunkEncoder (#12329 ) Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>	2 years ago
Filip Petkovski	0d049feac7	Fix encoding samples in ChunkSeries (#12185 ) The storage.ChunkSeries iterator assumes that a histogram sample can always be appended to the currently open chunk. This is not the case when there is a counter reset, or when appending a stale sample to a chunk with non-stale samples. In addition, the open chunk sometimes needs to be recoded before a sample can be appended. This commit addresses the issue by implementing a RecodingAppender which can recode incoming samples in a transparent way. It also detects cases when a sample cannot be appended at all and returns `false` so that the caller can open a new chunk. Signed-off-by: Filip Petkovski <filip.petkovsky@gmail.com> Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>	2 years ago
beorn7	817a2396cb	Name float values as "floats", not as "values" In the past, every sample value was a float, so it was fine to call a variable holding such a float "value" or "sample". With native histograms, a sample might have a histogram value. And a histogram value is still a value. Calling a float value just "value" or "sample" or "V" is therefore misleading. Over the last few commits, I already renamed many variables, but this cleans up a few more places where the changes are more invasive. Note that we do not to attempt naming in the JSON APIs or in the protobufs. That would be quite a disruption. However, internally, we can call variables as we want, and we should go with the option of avoiding misunderstandings. Signed-off-by: beorn7 <beorn@grafana.com>	2 years ago
beorn7	630bcb494b	storage: Use separate sample types for histogram vs. float Previously, we had one “polymorphous” `sample` type in the `storage` package. This commit breaks it up into `fSample`, `hSample`, and `fhSample`, each still implementing the `tsdbutil.Sample` interface. This reduces allocations in `sampleRing.Add` but inflicts the penalty of the interface wrapper, which makes things worse in total. This commit therefore just demonstrates the step taken. The next commit will tackle the interface overhead problem. Signed-off-by: beorn7 <beorn@grafana.com>	2 years ago
Marc Tudurí	9474610baf	Support FloatHistogram in TSDB (#11522 ) Extends Appender.AppendHistogram function to accept the FloatHistogram. TSDB supports appending, querying, WAL replay, for this new type of histogram. Signed-off-by: Marc Tudurí <marctc@protonmail.com> Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>	2 years ago
sniper91	16738b00e3	Do no re-use result slice in chunkSetToSeriesSet This is required to preserve the interface property of SeriesSet that says "At returns full series. Returned series should be iterable even after Next is called." Signed-off-by: sniper91 <kevinzhao91@outlook.com>	2 years ago
Bryan Boreham	0853250695	Review feedback Signed-off-by: Bryan Boreham <bjboreham@gmail.com>	2 years ago
Bryan Boreham	463f5cafdd	storage: re-use iterators to save garbage Re-use previous memory if it is already of the correct type. In `NewListSeries` we hoist the conversion to an interface value out so it only allocates once. Signed-off-by: Bryan Boreham <bjboreham@gmail.com>	2 years ago
Bryan Boreham	3c7de69059	storage: allow re-use of iterators Patterned after `Chunk.Iterator()`: pass the old iterator in so it can be re-used to avoid allocating a new object. (This commit does not do any re-use; it is just changing all the method signatures so re-use is possible in later commits.) Signed-off-by: Bryan Boreham <bjboreham@gmail.com>	2 years ago
Ganesh Vernekar	0f4e5196c4	Implement vertical compaction for native histograms (#11184 ) * Implement vertical compaction for native histograms Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix typo Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	2 years ago
beorn7	86cc83b13c	storage: iterator fixes after merge Signed-off-by: beorn7 <beorn@grafana.com>	3 years ago
beorn7	64c7bd2b08	Merge branch 'main' into sparsehistogram	3 years ago
beorn7	0ede6ae321	storage: fix bug #10027 in iterators' Seek method Signed-off-by: beorn7 <beorn@grafana.com>	3 years ago
Björn Rabenstein	b866db009b	storage: Fix and improve the Seek method of various iterators (#9878 ) There was a subtle and nasty bug in listSeriesIterator.Seek. In addition, the Seek call is defined to be a no-op if the current position of the iterator is already pointing to a suitable sample. This commit adds fast paths for this case to several potentially expensive Seek calls. Another bug was in concreteSeriesIterator.Seek. It always searched the whole series and not from the current position of the iterator. Signed-off-by: beorn7 <beorn@grafana.com>	3 years ago
Björn Rabenstein	7e42acd3b1	tsdb: Rework iterators (#9877 ) - Pick At... method via return value of Next/Seek. - Do not clobber returned buckets. - Add partial FloatHistogram suppert. Note that the promql package is now _only_ dealing with FloatHistograms, following the idea that PromQL only knows float values. As a byproduct, I have removed the histogramSeries metric. In my understanding, series can have both float and histogram samples, so that metric doesn't make sense anymore. As another byproduct, I have converged the sampleBuf and the histogramSampleBuf in memSeries into one. The sample type stored in the sampleBuf has been extended to also contain histograms even before this commit. Signed-off-by: beorn7 <beorn@grafana.com>	3 years ago
beorn7	5d4db805ac	Merge branch 'main' into sparsehistogram	3 years ago
beorn7	4c28d9fac7	Move to histogram.Histogram pointers This is to avoid copying the many fields of a histogram.Histogram all the time. This also fixes a bunch of formerly broken tests. Signed-off-by: beorn7 <beorn@grafana.com>	3 years ago
beorn7	c954cd9d1d	Move packages out of deprecated pkg directory This creates a new `model` directory and moves all data-model related packages over there: exemplar labels relabel rulefmt textparse timestamp value All the others are more or less utilities and have been moved to `util`: gate logging modetimevfs pool runtime Signed-off-by: beorn7 <beorn@grafana.com>	3 years ago
beorn7	8f92c90897	Add TODOs and some minor tweaks Signed-off-by: beorn7 <beorn@grafana.com>	3 years ago
Ganesh Vernekar	c8b267efd6	Get histograms from TSDB to the rate() function implementation Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	3 years ago
beorn7	7a8bb8222c	Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>	3 years ago
Ganesh Vernekar	f4d3af73f0	Query histograms from TSDB and unit test for append+query (#9022 ) Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	3 years ago
Ganesh Vernekar	04ad56d9b8	Append sparse histograms into the Head block (#9013 ) * Append sparse histograms into the Head block Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Add AtHistogram() to Iterator interface. Make HistoChunk conform to Chunk interface. Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	3 years ago
Ben Ye	d95b097250	expose seriesToChunkEncoder (#8845 ) Signed-off-by: yeya24 <yb532204897@gmail.com>	4 years ago
Matthias Loibl	7e7efaba32	storage: Split chunks if more than 120 samples (#8582 ) * storage: Split chunks if more than 120 samples Signed-off-by: Matthias Loibl <mail@matthiasloibl.com> * storage: Don't set maxt which is overwritten right away Signed-off-by: Matthias Loibl <mail@matthiasloibl.com> * storage: Improve comments on merge_test Signed-off-by: Matthias Loibl <mail@matthiasloibl.com> * storage: Improve comments and move code closer to usage Signed-off-by: Matthias Loibl <mail@matthiasloibl.com> * tsdb/tsdbutil: Add comment for GenerateSamples Signed-off-by: Matthias Loibl <mail@matthiasloibl.com>	4 years ago
Guangwen Feng	2c4a4548a8	Fix golint issue caused by incorrect func name (#7756 ) Signed-off-by: Guangwen Feng <fenggw-fnst@cn.fujitsu.com>	4 years ago
Bartlomiej Plotka	e6d7cc5fa4	tsdb: Added ChunkQueryable implementations to db; unified MergeSeriesSets and vertical to single struct. (#7069 ) * tsdb: Added ChunkQueryable implementations to db; unified compactor, querier and fanout block iterating. Chained to https://github.com/prometheus/prometheus/pull/7059 * NewMerge(Chunk)Querier now takies multiple primaries allowing tsdb DB code to use it. * Added single SeriesEntry / ChunkEntry for all series implementations. * Unified all vertical, and non vertical for compact and querying to single merge series / chunk sets by reusing VerticalSeriesMergeFunc for overlapping algorithm (same logic as before) * Added block (Base/Chunk/)Querier for block querying. We then use populateAndTomb(Base/Chunk/) to iterate over chunks or samples. * Refactored endpoint tests and querier tests to include subtests. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Addressed comments from Brian and Beorn. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fixed snapshot test and added chunk iterator support for DBReadOnly. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fixed race when iterating over Ats first. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fixed tests. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fixed populate block tests. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fixed endpoints test. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fixed test. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Added test & fixed case of head open chunk. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fixed DBReadOnly tests and bug producing 1 sample chunks. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Added cases for partial block overlap for multiple full chunks. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Added extra tests for chunk meta after compaction. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fixed small vertical merge bug and added more tests for that. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>	4 years ago
Bartlomiej Plotka	b788986717	storage: Adjusted fully storage layer support for chunk iterators: Remote read client, readyStorage, fanout. (#7059 ) * Fixed nits introduced by https://github.com/prometheus/prometheus/pull/7334 * Added ChunkQueryable implementation to fanout and readyStorage. * Added more comments. * Changed NewVerticalChunkSeriesMerger to CompactingChunkSeriesMerger, removed tiny interface by reusing VerticalSeriesMergeFunc for overlapping algorithm for both chunks and series, for both querying and compacting (!) + made sure duplicates are merged. * Added ErrChunkSeriesSet * Added Samples interface for seamless []promb.Sample to []tsdbutil.Sample conversion. * Deprecating non chunks serieset based StreamChunkedReadResponses, added chunk one. * Improved tests. * Split remote client into Write (old storage) and read. * Queryable client is now SampleAndChunkQueryable. Since we cannot use nice QueryableFunc I moved all config based options to sampleAndChunkQueryableClient to aboid boilerplate. In next commit: Changes for TSDB. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>	4 years ago
Bartlomiej Plotka	d5c33877f9	storage: Added Chunks{Queryable/Querier/SeriesSet/Series/Iteratable. Added generic Merge{SeriesSet/Querier} implementation. (#7005 ) * storage: Added Chunks{Queryable/Querier/SeriesSet/Series/Iteratable. Added generic Merge{SeriesSet/Querier} implementation. ## Rationales: In many places (e.g. chunk Remote read, Thanos Receive fetching chunk from TSDB), we operate on encoded chunks not samples. This means that we unnecessary decode/encode, wasting CPU, time and memory. This PR adds chunk iterator interfaces and makes the merge code to be reused between both seriesSets I will make the use of it in following PR inside tsdb itself. For now fanout implements it and mergers. All merges now also allows passing series mergers. This opens doors for custom deduplications other than TSDB vertical ones (e.g. offline one we have in Thanos). ## Changes * Added Chunk versions of all iterating methods. It all starts in Querier/ChunkQuerier. The plan is that Storage will implement both chunked and samples. * Added Seek to chunks.Iterator interface for iterating over chunks. * NewMergeChunkQuerier was added; Both this and NewMergeQuerier are now using generigMergeQuerier to share the code. Generic code was added. * Improved tests. * Added some TODO for further simplifications in next PRs. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Addressed Brian's comments. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Moved s/Labeled/SeriesLabels as per Krasi suggestion. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Addressed Krasi's comments. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Second iteration of Krasi comments. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Another round of comments. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>	5 years ago

32 Commits (bd895baefcafe785c0fd3ee33a5bf2f361985ced)