Support limit parameter in queries to restrict output data to the specified size, on the following endpoints:
/api/v1/series
/api/v1/labels
/api/v1/label/:name:/values
Signed-off-by: Pranshu Srivastava <rexagod@gmail.com>
Signed-off-by: Kartikay <kartikay_2101ce32@iitp.ac.in>
This closes the loop, as the output can be fed into "tsdb create-blocks-from openmetrics"
Native histograms are not supported.
Signed-off-by: machine424 <ayoubmrini424@gmail.com>
Updated & added tests
Review feedback nits
Return empty map if not indeterminate
Use highWatermark to track inflight requests counter
Appease the linter
Clarify feature flag
Signed-off-by: Danny Kopping <danny.kopping@grafana.com>
Enable automatic detection of memory limits and configure GOMEMLIMIT to
match.
* Also includes a flag to allow controlling the reserved ratio.
Signed-off-by: SuperQ <superq@gmail.com>
Native Histograms: support native_histogram_min_bucket_factor in scrape_config
---------
Signed-off-by: Ziqi Zhao <zhaoziqi9146@gmail.com>
Signed-off-by: Björn Rabenstein <github@rabenste.in>
Co-authored-by: George Krajcsovits <krajorama@users.noreply.github.com>
Co-authored-by: Björn Rabenstein <github@rabenste.in>
Conditions are ANDed inside the same matcher but matchers are ORed
Including unit tests for "promtool tsdb dump".
Refactor some matchers scraping utils.
Signed-off-by: machine424 <ayoubmrini424@gmail.com>
Add `query analyze` command to promtool
This command analyzes the buckets of classic and native histograms,
based on data queried from the Prometheus query API, i.e. it
doesn't require direct access to the TSDB files.
Signed-off-by: Jeanette Tan <jeanette.tan@grafana.com>
---------
Signed-off-by: Jeanette Tan <jeanette.tan@grafana.com>
* Drop old inmemory samples
Co-authored-by: Paschalis Tsilias <paschalis.tsilias@grafana.com>
Signed-off-by: Paschalis Tsilias <paschalis.tsilias@grafana.com>
Signed-off-by: Marc Tuduri <marctc@protonmail.com>
* Avoid copying timeseries when the feature is disabled
Signed-off-by: Paschalis Tsilias <paschalis.tsilias@grafana.com>
Signed-off-by: Marc Tuduri <marctc@protonmail.com>
* Run gofmt
Signed-off-by: Paschalis Tsilias <paschalis.tsilias@grafana.com>
Signed-off-by: Marc Tuduri <marctc@protonmail.com>
* Clarify docs
Signed-off-by: Marc Tuduri <marctc@protonmail.com>
* Add more logging info
Signed-off-by: Marc Tuduri <marctc@protonmail.com>
* Remove loggers
Signed-off-by: Marc Tuduri <marctc@protonmail.com>
* optimize function and add tests
Signed-off-by: Marc Tuduri <marctc@protonmail.com>
* Simplify filter
Signed-off-by: Marc Tuduri <marctc@protonmail.com>
* rename var
Signed-off-by: Marc Tuduri <marctc@protonmail.com>
* Update help info from metrics
Signed-off-by: Marc Tuduri <marctc@protonmail.com>
* use metrics to keep track of drop elements during buildWriteRequest
Signed-off-by: Marc Tuduri <marctc@protonmail.com>
* rename var in tests
Signed-off-by: Marc Tuduri <marctc@protonmail.com>
* pass time.Now as parameter
Signed-off-by: Marc Tuduri <marctc@protonmail.com>
* Change buildwriterequest during retries
Signed-off-by: Marc Tuduri <marctc@protonmail.com>
* Revert "Remove loggers"
This reverts commit 54f91dfcae20488944162335ab4ad8be459df1ab.
Signed-off-by: Marc Tuduri <marctc@protonmail.com>
* use log level debug for loggers
Signed-off-by: Marc Tuduri <marctc@protonmail.com>
* Fix linter
Signed-off-by: Paschalis Tsilias <paschalis.tsilias@grafana.com>
* Remove noisy debug-level logs; add 'reason' label to drop metrics
Signed-off-by: Paschalis Tsilias <paschalis.tsilias@grafana.com>
* Remove accidentally committed files
Signed-off-by: Paschalis Tsilias <paschalis.tsilias@grafana.com>
* Propagate logger to buildWriteRequest to log dropped data
Signed-off-by: Paschalis Tsilias <paschalis.tsilias@grafana.com>
* Fix docs comment
Signed-off-by: Paschalis Tsilias <paschalis.tsilias@grafana.com>
* Make drop reason more specific
Signed-off-by: Paschalis Tsilias <paschalis.tsilias@grafana.com>
* Remove unnecessary pass of logger
Signed-off-by: Paschalis Tsilias <paschalis.tsilias@grafana.com>
* Use snake_case for reason label
Signed-off-by: Paschalis Tsilias <paschalis.tsilias@grafana.com>
* Fix dropped samples metric
Signed-off-by: Paschalis Tsilias <paschalis.tsilias@grafana.com>
---------
Signed-off-by: Paschalis Tsilias <paschalis.tsilias@grafana.com>
Signed-off-by: Marc Tuduri <marctc@protonmail.com>
Signed-off-by: Paschalis Tsilias <tpaschalis@users.noreply.github.com>
Co-authored-by: Paschalis Tsilias <paschalis.tsilias@grafana.com>
Co-authored-by: Paschalis Tsilias <tpaschalis@users.noreply.github.com>
promql: Improve histogram_quantile calculation for classic buckets
Tiny differences between classic buckets are most likely caused by floating point precision issues. With this commit, relative changes below a certain threshold are ignored. This makes the result of histogram_quantile more meaningful, and also avoids triggering the _input to histogram_quantile needed to be fixed for monotonicity_ annotations in unactionable cases.
This commit also adds explanation of the new adjustment and of the monotonicity annotation to the documentation of `histogram_quantile`.
---------
Signed-off-by: Jeanette Tan <jeanette.tan@grafana.com>
Currently Prometheus will always request gzip compression from the target when sending scrape requests.
HTTP compression does reduce the amount of bytes sent over the wire and so is often desirable.
The downside of compression is that it requires extra resources - cpu & memory.
This also affects the resource usage on the target since it has to compress the response
before sending it to Prometheus.
This change adds a new option to the scrape job configuration block: enable_compression.
The default is true so it remains the same as current Prometheus behaviour.
Setting this option to false allows users to disable compression between Prometheus
and the scraped target, which will require more bandwidth but it lowers the resource
usage of both Prometheus and the target.
Fixes#12319.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
This PR adds an Experimental flag to the functions.
This can be used by https://github.com/prometheus/prometheus/pull/13059
but also xrate and other future functions.
Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>
* Document le and quantile label transition due to native histograms
Fixes: #12984
For full explanation see the related issue. The le and quantile labels
are formatted as float with trailing .0 for whole number values when
native histograms is enabled, e.g. 10.0. This changes the resulting series
in Prometheus if previously we scraped the whole number itself, e.g. 10
over the text format.
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
---------
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
Signed-off-by: George Krajcsovits <krajorama@users.noreply.github.com>
* Added ability to specify scrape protocols to accept during HTTP content type negotiation.
This is done via new option in GlobalConfig and ScrapeConfig: "scrape_protocol"
Signed-off-by: bwplotka <bwplotka@gmail.com>
* Fixed readability and log message.
Signed-off-by: bwplotka <bwplotka@gmail.com>
---------
Signed-off-by: bwplotka <bwplotka@gmail.com>
Namely, call out that all subsequent evaluations will be skipped until the initial evaluation completes.
Signed-off-by: Jennifer Villa <jvilla2013@gmail.com>
* support specifying series matchers to analyze tsdb
Signed-off-by: Ben Ye <benye@amazon.com>
* fix cli docs
Signed-off-by: Ben Ye <benye@amazon.com>
---------
Signed-off-by: Ben Ye <benye@amazon.com>
Addresses: #12536
This commit adds support for configuring sigv4 to an
`alertmanager_config`. Based heavily on the sigv4 work in the remote
write client.
Signed-off-by: TJ Hoplock <t.hoplock@gmail.com>
promql: Extend testing framework to support native histograms
This includes both the internal testing framework as well as the rules unit test feature of promtool.
This also adds a bunch of basic tests. Many of the code level tests can now be converted to tests within the framework, and more tests can be added easily.
---------
Signed-off-by: Harold Dost <h.dost@criteo.com>
Signed-off-by: Gregor Zeitlinger <gregor.zeitlinger@grafana.com>
Signed-off-by: Stephen Lang <stephen.lang@grafana.com>
Co-authored-by: Harold Dost <h.dost@criteo.com>
Co-authored-by: Stephen Lang <stephen.lang@grafana.com>
Co-authored-by: Gregor Zeitlinger <gregor.zeitlinger@grafana.com>
It's possible (quite common on Kubernetes) to have a service discovery
return thousands of targets then drop most of them in relabel rules.
The main place this data is used is to display in the web UI, where
you don't want thousands of lines of display.
The new limit is `keep_dropped_targets`, which defaults to 0
for backwards-compatibility.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
We still need a guide that we can link users to in https://github.com/prometheus/docs/tree/main/content/docs/guides
This guide should show sending metrics from application directly via
the OTel SDKs and also sending through the Collector.
Signed-off-by: Goutham <gouthamve@gmail.com>
* Add OTLP Ingestion endpoint
We copy files from the otel-collector-contrib. See the README in
`storage/remote/otlptranslator/README.md`.
This supersedes: https://github.com/prometheus/prometheus/pull/11965
Signed-off-by: gouthamve <gouthamve@gmail.com>
* Return a 200 OK
It is what the OTEL Golang SDK expect :(
https://github.com/open-telemetry/opentelemetry-go/issues/4363
Signed-off-by: Goutham <gouthamve@gmail.com>
---------
Signed-off-by: gouthamve <gouthamve@gmail.com>
Signed-off-by: Goutham <gouthamve@gmail.com>
Adds a new label to include the ID of the image that an instance is
using. This can be used for example to filter a job to only include
instances using a certain image as that image includes some exporter.
Sometimes the image information isn't available, such as when the image
is private and the user doesn't have the roles required to see it. In
those cases we just don't set the label, as the rest of the information
from the discovery provider can still be used.
Signed-off-by: Taavi Väänänen <hi@taavi.wtf>
Just adding a statement here explaining that the default is an
immediate move to "active" without a pending state.
Signed-off-by: Tim Martin <tim@timmartin.me>
Adds web config option `client_allowed_sans`. This enables Prometheus to
limit the Subject Alternate Name (SAN) allowed to connect.
Signed-off-by: SuperQ <superq@gmail.com>
Handle more arithmetic operators and aggregators for native histograms
This includes operators for multiplication (formerly known as scaling), division, and subtraction. Plus aggregations for average and the avg_over_time function.
Stdvar and stddev will (for now) ignore histograms properly (rather than counting them but adding a 0 for them).
Signed-off-by: Jeanette Tan <jeanette.tan@grafana.com>
So far, if a target exposes a histogram with both classic and native
buckets, a native-histogram enabled Prometheus would ignore the
classic buckets. With the new scrape config option
`scrape_classic_histograms` set, both buckets will be ingested,
creating all the series of a classic histogram in parallel to the
native histogram series. For example, a histogram `foo` would create a
native histogram series `foo` and classic series called `foo_sum`,
`foo_count`, and `foo_bucket`.
This feature can be used in a migration strategy from classic to
native histograms, where it is desired to have a transition period
during which both native and classic histograms are present.
Note that two bugs in classic histogram parsing were found and fixed
as a byproduct of testing the new feature:
1. Series created from classic _gauge_ histograms didn't get the
_sum/_count/_bucket prefix set.
2. Values of classic _float_ histograms weren't parsed properly.
Signed-off-by: beorn7 <beorn@grafana.com>
Introduces support for a new query parameter in the `/rules` API endpoint that allows filtering by rule names.
If all the rules of a group are filtered, we skip the group entirely.
Signed-off-by: gotjosh <josue.abreu@gmail.com>
In other words: Instead of having a “polymorphous” `Point` that can
either contain a float value or a histogram value, use an `FPoint` for
floats and an `HPoint` for histograms.
This seemingly small change has a _lot_ of repercussions throughout
the codebase.
The idea here is to avoid the increase in size of `Point` arrays that
happened after native histograms had been added.
The higher-level data structures (`Sample`, `Series`, etc.) are still
“polymorphous”. The same idea could be applied to them, but at each
step the trade-offs needed to be evaluated.
The idea with this change is to do the minimum necessary to get back
to pre-histogram performance for functions that do not touch
histograms. Here are comparisons for the `changes` function. The test
data doesn't include histograms yet. Ideally, there would be no change
in the benchmark result at all.
First runtime v2.39 compared to directly prior to this commit:
```
name old time/op new time/op delta
RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8)
RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10)
RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9)
RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10)
```
And then runtime v2.39 compared to after this commit:
```
name old time/op new time/op delta
RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8)
RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8)
RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10)
RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9)
RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9)
```
In summary, the runtime doesn't really improve with this change for
queries with just a few steps. For queries with many steps, this
commit essentially reinstates the old performance. This is good
because the many-step queries are the one that matter most (longest
absolute runtime).
In terms of allocations, though, this commit doesn't make a dent at
all (numbers not shown). The reason is that most of the allocations
happen in the sampleRingIterator (in the storage package), which has
to be addressed in a separate commit.
Signed-off-by: beorn7 <beorn@grafana.com>
This makes it more consistent with other command like import rules. We
don't have stricts rules and uniformity accross promtool unfortunately,
but I think it's better to only have the http config on relevant check
commands to avoid thinking Prometheus can e.g. check the config over the
wire.
Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>
* Correct statement in docs about query results returning either floats or histograms but not both.
* Move documentation for range and instant vectors under their corresponding headings.
Signed-off-by: Charles Korn <charles.korn@grafana.com>
This commit adds a new 'keep_firing_for' field to Prometheus alerting
rules. The 'resolve_delay' field specifies the minimum amount of time
that an alert should remain firing, even if the expression does not
return any results.
This feature was discussed at a previous dev summit, and it was
determined that a feature like this would be useful in order to allow
the expression time to stabilize and prevent confusing resolved messages
from being propagated through Alertmanager.
This approach is simpler than having two PromQL queries, as was
sometimes discussed, and it should be easy to implement.
This commit does not include tests for the 'resolve_delay' field. This
is intentional, as the purpose of this commit is to gather comments on
the proposed design of the 'resolve_delay' field before implementing
tests. Once the design of the 'resolve_delay' field has been finalized,
a follow-up commit will be submitted with tests."
See https://github.com/prometheus/prometheus/issues/11570
Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>
* Update docs example rules for default config
The prometheus download includes a default config to scrape itself.
This self-scraping prometheus doesn't include any metric named as
`http_inprogress_requests`, but does include one named
`prometheus_http_requests_total`.
Updating this example rule in the docs to one which can be used
out-of-the-box with the default download would be a nice improvement.
Signed-off-by: Sam Jewell <sam.jewell@grafana.com>
* Update syntax as per @LeviHarrison's review
Co-authored-by: Levi Harrison <levisamuelharrison@gmail.com>
Signed-off-by: Sam Jewell <2903904+samjewell@users.noreply.github.com>
Signed-off-by: Sam Jewell <sam.jewell@grafana.com>
Signed-off-by: Sam Jewell <2903904+samjewell@users.noreply.github.com>
Co-authored-by: Levi Harrison <levisamuelharrison@gmail.com>
Since the struct defines proxy_connect_header instead of proxy_connect_headers, all relevant occurences of it were replaced with the correct configuration name as defined in the HTTPClientConfig struct.
Signed-off-by: Robbe Haesendonck <googleit@inuits.eu>
* Add API endpoints for getting scrape pool names
This adds api/v1/scrape_pools endpoint that returns the list of *names* of all the scrape pools configured.
Having it allows to find out what scrape pools are defined without having to list and parse all targets.
The second change is adding scrapePool query parameter support in api/v1/targets endpoint, that allows to
filter returned targets by only finding ones for passed scrape pool name.
Both changes allow to query for a specific scrape pool data, rather than getting all the targets for all possible scrape pools.
The problem with api/v1/targets endpoint is that it returns huge amount of data if you configure a lot of scrape pools.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
* Add a scrape pool selector on /targets page
Current targets page lists all possible targets. This works great if you only have a few scrape pools configured,
but for systems with a lot of scrape pools and targets this slow things down a lot.
Not only does the /targets page load very slowly in such case (waiting for huge API response) but it also take
a long time to render, due to huge number of elements.
This change adds a dropdown selector so it's possible to select only intersting scrape pool to view.
There's also scrapePool query param that will open selected pool automatically.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
* Add VM size label to azure service discovery (#11575)
Signed-off-by: davidifr <davidfr.mail@gmail.com>
* Add VM size label to azure service discovery (#11575)
Signed-off-by: davidifr <davidfr.mail@gmail.com>
* Add VM size label to azure service discovery (#11575)
Signed-off-by: davidifr <davidfr.mail@gmail.com>
Signed-off-by: davidifr <davidfr.mail@gmail.com>
* docs: Add link to best practices in "Defining Recording Rules" page
Signed-off-by: John Carlo Roberto <10111643+Irizwaririz@users.noreply.github.com>
* docs: Improve wording
Signed-off-by: John Carlo Roberto <10111643+Irizwaririz@users.noreply.github.com>
Signed-off-by: John Carlo Roberto <10111643+Irizwaririz@users.noreply.github.com>
* Common client in EC2 and Lightsail
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Azure -> AWS
Signed-off-by: Levi Harrison <git@leviharrison.dev>
Signed-off-by: Levi Harrison <git@leviharrison.dev>
This PR updates the Serverset url at the configuration.md documentation.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Illustrate use of named capturing group syntax available from https://github.com/google/re2/wiki/Syntax and their usage in the replacement field
Signed-off-by: Guillaume Berche <guillaume.berche@orange.com>
Some frameworks issue HEAD requests to determine health.
This resolvesprometheus/prometheus#11159
Signed-off-by: Nicolas Dumazet <nicdumz.commits@gmail.com>
Signed-off-by: Nicolas Dumazet <nicdumz.commits@gmail.com>
Currently, it's not explicitly called out which permissions are needed
for service discovery of EC2 instances. It's not super hard to figure
out, but it did involve a bit of guesswork when I did it yesterday, and
I figure it's worth saving people that effort.
I've also seen examples around the internet where people are granting
much broader permissions than they need to, so maybe we can save on that
by explicitly saying what's needed.
Signed-off-by: Chris Sinjakli <chris@sinjakli.co.uk>
It's currently possible to use blackbox_exporter to probe MX records
themselves. However it's not possible to do an end-to-end test, like is
possible with SRV records. This makes it possible to use MX records as a
source of hostnames in the same way as SRV records.
Signed-off-by: David Leadbeater <dgl@dgl.cx>
* Add /api/v1/format_query API endpoint for formatting queries
This uses the formatting functionality introduced in
https://github.com/prometheus/prometheus/pull/10544.
I've chosen "query" instead of "expr" in both the endpoint and parameter
names to stay consistent with the existing API endpoints. Otherwise, I
would have preferred to use the term "expr".
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Add docs for /api/v1/format_query endpoint
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Add note that formatting expressions removes comments
Signed-off-by: Julius Volz <julius.volz@gmail.com>
Signed-off-by: Jonathan Stevens <jonathanstevens89@gmail.com>
Signed-off-by: Jonathan Stevens <jon.stevens@getweave.com>
Co-authored-by: Jonathan Stevens <jon.stevens@getweave.com>
- For now this is relatively simplistic, but at least acknowledges some
of the basics, and points out some parts that might not be obvious at first.
Relates to #7192
Signed-off-by: Harold Dost <h.dost@criteo.com>
* add description for __meta_kubernetes_endpoints_label_* and __meta_kubernetes_endpoints_labelpresent_*
Signed-off-by: renzheng.wang <wangrzneu@gmail.com>
This follow a simple function-based approach to access the count and
sum fields of a native Histogram. It might be more elegant to
implement “accessors” via the dot operator, as considered in the
brainstorming doc [1]. However, that would require the introduction of
a whole new concept in PromQL. For the PoC, we should be fine with the
function-based approch. Even the obvious inefficiencies (rate'ing a
whole histogram twice when we only want to rate each the count and the
sum once) could be optimized behind the scenes.
Note that the function-based approach elegantly solves the problem of
detecting counter resets in the sum of observations in the case of
negative observations. (Since the whole native Histogram is rate'd,
the counter reset is detected for the Histogram as a whole.)
We will decide later if an “accessor” approach is really needed. It
would change the example expression for average duration in
functions.md from
histogram_sum(rate(http_request_duration_seconds[10m]))
/
histogram_count(rate(http_request_duration_seconds[10m]))
to
rate(http_request_duration_seconds.sum[10m])
/
rate(http_request_duration_seconds.count[10m])
[1]: https://docs.google.com/document/d/1ch6ru8GKg03N02jRjYriurt-CZqUVY09evPg6yKTA1s/edit
Signed-off-by: beorn7 <beorn@grafana.com>
The Kubernetes service discovery can only add node labels to
targets from the pod role.
This commit extends this functionality to the endpoints and
endpointslices roles.
Signed-off-by: Filip Petkovski <filip.petkovsky@gmail.com>
Since Prometheus documentation is versioned, do not write down that a
specific function was added in Prom 2.0, for consistency.
Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>
* Provide a callout about the vector matching keywords and the group
modifiers.
Relates prometheus/docs#2106
Signed-off-by: Harold Dost <h.dost@criteo.com>
We always track total samples queried and add those to the standard set
of stats queries can report.
We also allow optionally tracking per-step samples queried. This must be
enabled both at the engine and query level to be tracked and rendered.
The engine flag is exposed via a Prometheus feature flag, while the
query flag is set when stats=all.
Co-authored-by: Alan Protasio <approtas@amazon.com>
Co-authored-by: Andrew Bloomgarden <blmgrdn@amazon.com>
Co-authored-by: Harkishen Singh <harkishensingh@hotmail.com>
Signed-off-by: Andrew Bloomgarden <blmgrdn@amazon.com>
Update the wording of the `labelmap` relabel action to make it more
clear that it acts on all the label names, rather than the list provided
by source_labels.
Signed-off-by: SuperQ <superq@gmail.com>
* Fix documentation for Docker API filters
Signed-off-by: Robert Jacob <xperimental@solidproject.de>
* Undo indentation change
Signed-off-by: Robert Jacob <xperimental@solidproject.de>
* Added pathPrefix function to the template reference documentation
Signed-off-by: David N Perkins <David.N.Perkins@ibm.com>
* PR suggestions
Signed-off-by: David N Perkins <David.N.Perkins@ibm.com>
* Switch wording back
Signed-off-by: David N Perkins <David.N.Perkins@ibm.com>
* Followup on OpenTelemetry migration
- tracing_config: Change with_insecure to insecure, default to false.
- tracing_config: Call SetDirectory to make TLS certificates relative to the Prometheus
configuration
- documentation: Change bool to boolean in the configuration
- documentation: document type float
- tracing: Always restart the tracing manager when TLS config is set to
reload certificates
- tracing: Always set TLS config, which could be used e.g. in case of
potential redirects.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>\\
Kartikay