TestConcurrentRangeQueries runs many queries, up to 4 at the same time,
to try to expose any race conditions.
This change stops four of them from running with a thousand or more steps:
`holt_winters(a_X[1d], 0.3, 0.3)`
`changes(a_X[1d])`
`rate(a_X[1d])`
`absent_over_time(a_X[1d])`
Particularly when the test runs with `-race` in CI, this reduces the
time and resources required.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* promql: refactor BenchmarkRangeQuery so we can re-use test cases
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* promql: add test for race conditions in query engine
Note we skip large count_values queries -
`count_values` allocates a slice per unique value in the output, and
this test has unique values on every step of every series so it adds up
to a lot of slices. Add Go runtime overhead for checking `-race`, and
it chews up many gigabytes.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* TestConcurrentRangeQueries: wait before starting goroutine
Instead of starting 100 goroutines which just wait for the semaphore.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Testify: move to require
Moving testify to require to fail tests early in case of errors.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* More moves
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* tsdb: Added ChunkQueryable implementations to db; unified compactor, querier and fanout block iterating.
Chained to https://github.com/prometheus/prometheus/pull/7059
* NewMerge(Chunk)Querier now takies multiple primaries allowing tsdb DB code to use it.
* Added single SeriesEntry / ChunkEntry for all series implementations.
* Unified all vertical, and non vertical for compact and querying to single
merge series / chunk sets by reusing VerticalSeriesMergeFunc for overlapping algorithm (same logic as before)
* Added block (Base/Chunk/)Querier for block querying. We then use populateAndTomb(Base/Chunk/) to iterate over chunks or samples.
* Refactored endpoint tests and querier tests to include subtests.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Addressed comments from Brian and Beorn.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed snapshot test and added chunk iterator support for DBReadOnly.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed race when iterating over Ats first.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed tests.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed populate block tests.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed endpoints test.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed test.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Added test & fixed case of head open chunk.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed DBReadOnly tests and bug producing 1 sample chunks.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Added cases for partial block overlap for multiple full chunks.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Added extra tests for chunk meta after compaction.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed small vertical merge bug and added more tests for that.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* promql: Move tests to testutil
Signed-off-by: Alex Dzyoba <alex@dzyoba.com>
* promql: Match error type via errors.As in tests
Signed-off-by: Alex Dzyoba <alex@dzyoba.com>
* promql: Remove unused `expectedList` func from lex_test.go
Signed-off-by: Alex Dzyoba <alex@dzyoba.com>
This is with `golint -min_confidence=0.5`.
I left several lint warnings untouched because they were either
incorrect or I felt it was better not to change them at the moment.
This copies the evaluation logic from the current rules/ package.
The new engine handles the execution process from query string to final result.
It provides query timeout and cancellation and general flexibility for
future changes.
functions.go: Add evaluation implementation. Slight changes to in/out data but
not to the processing logic.
quantile.go: No changes.
analyzer.go: No changes.
engine.go: Actually new part. Mainly consists of evaluation methods
which were not changed.
setup_test.go: Copy of rules/helpers_test.go to setup test storage.
promql_test.go: Copy of rules/rules_test.go.
This adds the population standard deviation and
variance as aggregation functions, useful for
spotting how many standard deviations some samples
are from the mean.
Unary expressions cause parsing errors if they are done in the lexer
by tokenizing them into the number.
This fix moves unary expressions to the parser.
This commits implements the OR operation between two vectors.
Vector matching using the ON clause is added to limit the set of
labels that define a match between two elements. Group modifiers
(GROUP_LEFT/GROUP_RIGHT) to request many-to-one matching are added.
This adds support for scientific notation in the expression language, as
well as for all possible literal forms of +Inf/-Inf/NaN.
TODO: Keep enough state in the parser/lexer to distinguish contexts in
which "Inf", "NaN", etc. should be parsed as a number vs. parsed as a
label name. Currently, foo{nan="bar"} would be a syntax error. However,
that is an existing bug for all our reserved words. E.g. foo{sum="bar"}
is a syntax error as well. This should be fixed separately.
Since we are now getting really deep into floating point calculation,
the tests had to take into account the precision loss. Since the rule
tests are based on direct line matching in the output, implementing
the "almost equal" semantics was pretty cumbersome, but here we are.
This allows changing the time offset for individual instant and range
vectors in a query.
For example, this returns the value of `foo` 5 minutes in the past
relative to the current query evaluation time:
foo offset 5m
Note that the `offset` modifier always needs to follow the selector
immediately. I.e. the following would be correct:
sum(foo offset 5m) // GOOD.
While the following would be *incorrect*:
sum(foo) offset 5m // INVALID.
The same works for range vectors. This returns the 5-minutes-rate that
`foo` had a week ago:
rate(foo[5m] offset 1w)
This change touches the following components:
* Lexer/parser: additions to correctly parse the new `offset`/`OFFSET`
keyword.
* AST: vector and matrix nodes now have an additional `offset` field.
This is used during their evaluation to adjust query and result times
appropriately.
* Query analyzer: now works on separate sets of ranges and instants per
offset. Isolating different offsets from each other completely in this
way keeps the preloading code relatively simple.
No storage engine changes were needed by this change.
The rules tests have been changed to not probe the internal
implementation details of the query analyzer anymore (how many instants
and ranges have been preloaded). This would also become too cumbersome
to test with the new model, and measuring the result of the query should
be sufficient.
This fixes https://github.com/prometheus/prometheus/issues/529
This fixed https://github.com/prometheus/promdash/issues/201
The 2nd isCounter argument to delta is ugly, make it optional as the first step
of deprecating it. This will makes delta only ever applied to gauges.
Add a deriv function to calculate the least squares
slope of a gauge. This is more useful for prediction than delta,
as it isn't as heavily influenced by outliers at the boundaries.
- Move CONTRIBUTORS.md to the more common AUTHORS.
- Added the required NOTICE file.
- Changed "Prometheus Team" to "The Prometheus Authors".
- Reverted the erroneous changes to the Apache License.
It turned out in the end, that only drop_common_metrics() produced any
erroneous output in the old system. The second expression in the test
("sum(testmetric) keeping_extra") already worked in the old code, but
why not keep it in...
The way to test ranged evaluations is a bit clumsy so far, so I want to
build a nicer test framework in the end, where all the test cases can be
specified as text files which specify desired inputs, outputs, query
step widths, etc.
Change-Id: I821859789e69b8232bededf670a1b76e9e8c8ca4
A common problem in Prometheus alerting is to detect when no timeseries
exist for a given metric name and label combination. Unfortunately,
Prometheus alert expressions need to be of vector type, and
"count(nonexistent_metric)" results in an empty vector, yielding no
output vector elements to base an alert on. The newly introduced
absent() function solves this issue:
ALERT FooAbsent IF absent(foo{job="myjob"}) [...]
absent() has the following behavior:
- if the vector passed to it has any elements, it returns an empty
vector.
- if the vector passed to it has no elements, it returns a 1-element
vector with the value 1.
In the second case, absent() tries to be smart about deriving labels of
the 1-element output vector from the input vector:
absent(nonexistent{job="myjob"}) => {job="myjob"}
absent(nonexistent{job="myjob",instance=~".*"}) => {job="myjob"}
absent(sum(nonexistent{job="myjob"})) => {}
That is, if the passed vector is a literal vector selector, it takes all
"=" label matchers as the basis for the output labels, but ignores all
non-equals or regex matchers. Also, if the passed vector results from a
non-selector expression, no labels can be derived.
Change-Id: I948505a1488d50265ab5692a3286bd7c8c70cd78
After many transformations, it doesn't make sense to keep the metric
names, since the result of the transformation is no longer that metric.
This drops the metric name after such transformations and makes the web
UI deal well with missing metric names.
This depends on the current branch on the following things:
- prometheus/client_golang needs to be at
e237cf15c6
in branch "julius/int-fingerprints" (to be merged with new storage)
- prometheus/promdash needs to be at
dd7691c9c2
Change-Id: Ib3c8cad8d647d9854e8c653c424b8c235ccc231d
In addition to the existing by-clause syntax:
sum(<expression>) by (<labels>) [keeping_extra]
...this allows the following new syntax:
sum by (<labels>) [keeping_extra] (<expression>)
Both orderings may be used in a single expression. It is up to the users
to establish guidelines around their usage.
Change-Id: Iba10c9cc5fb6ac62edfcf246d281473e82467992
This allows the following expression syntaxes for selecting timeseries:
foo (already valid before)
foo{} (already valid before)
{job="prometheus"} (new, select all timeseries for job "prometheus")
Omitting both the metric name *and* any label matchers ("" or "{}") will
still yield a syntax error.
To get all timeseries, you could do:
{__name__=~".*"}
or, without relying on knowledge about __metric__:
{job=~".*"}
Change-Id: Ifee000b9ac0184ef6ced18411069c7f2699a2dda
Julien Pivotto