* tsdb/agent: Fix deadlock from simultaneous GC and write
This commit fixes a potential deadlock where storing in-memory series
references could deadlock with a WAL GC cycle.
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* add missing license header
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* order local imports
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* align deadlock testing with discovery/manager_test.go method
Also prevents GCs from running concurrently, which could also cause a
deadlock (even though it's currently impossible for two GCs to run
concurrently).
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* Write chunks via queue, predicting the refs
Our load tests have shown that there is a latency spike in the
remote write handler whenever the head chunks need to be written,
because chunkDiskMapper.WriteChunk() blocks until the chunks are written
to disk.
This adds a queue to the chunk disk mapper which makes the WriteChunk()
method non-blocking unless the queue is full. Reads can still be served
from the queue.
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* address PR feeddback
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* initialize metrics without .Add(0)
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* change isRunningMtx to normal lock
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* do not re-initialize chunkrefmap
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* update metric outside of lock scope
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* add benchmark for adding job to chunk write queue
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* remove unnecessary "success" var
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* gofumpt -extra
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* avoid WithLabelValues call in addJob
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* format comments
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* addressing PR feedback
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* rename cutExpectRef to cutAndExpectRef
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* use head.Init() instead of .initTime()
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* address PR feedback
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* PR feedback
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* update test according to PR feedback
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* replace callbackWg -> awaitCb
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* better test of truncation with empty files
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* replace callbackWg -> awaitCb
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
Unexported postingsWithIndexHeap's methods that don't need to be
exported, and added detailed comments.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* tsdb: fix exemplar benchmarks
Go benchmarks are expected to do an amount of work that varies with
the `b.N` parameter. Previously these benchmarks would report a result
like 0.01 ns/op, which is nonsense.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* tsdb: use simpler map key to improve exemplar perf
Prometheus holds an index of exemplars so it can discard the oldest one
for a series when a new one is added.
Since the keys are not for human eyes, we can use a simpler format
and save the effort of quoting label values.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Exemplars: allocate index map with estimated size
This avoids Go having to re-size the map several times as it grows.
16 exemplars per series is a guess; if it is too low then the map will
be sparse, while if it is too high then the map will have to resize once
or twice.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
See this comment for detailed explanation:
https://github.com/prometheus/prometheus/pull/9907#issuecomment-1002189932
TL;DR: if we don't call Pop() on the heap implementation, we don't need
to return our param as an `interface{}` so we save an allocation.
This would be popped for every label value, so it can be thousands of
saved allocations here (see benchmarks).
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* storage: expose bug in iterators #10027
Signed-off-by: beorn7 <beorn@grafana.com>
* storage: fix bug #10027 in iterators' Seek method
Signed-off-by: beorn7 <beorn@grafana.com>
* Append reporting metrics without limit
If reporting metrics fails due to reaching the limit, this makes the
target appear as UP in the UI, but the metrics are missing.
This commit bypasses that limit for report metrics.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Remove check against cfg so interval/ timeout are always set (#10023) (#10031)
Signed-off-by: Nicholas Blott <blottn@tcd.ie>
Co-authored-by: Nicholas Blott <blottn@tcd.ie>
* Cut v2.32.1
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Apply suggestions from code review
Signed-off-by: Julius Volz <julius.volz@gmail.com>
Co-authored-by: Levi Harrison <git@leviharrison.dev>
Co-authored-by: Julien Pivotto <roidelapluie@inuits.eu>
Co-authored-by: Nicholas Blott <blottn@tcd.ie>
Co-authored-by: Julius Volz <julius.volz@gmail.com>
Co-authored-by: Levi Harrison <git@leviharrison.dev>
The atomic Int64 type wasn't able to be represented when logging
via go-kit log and ended up as `"unsupported value type"`.
Signed-off-by: Nick Pillitteri <nick.pillitteri@grafana.com>
* tsdb/agent: synchronize appender code with grafana/agent main
This commit synchronize the appender code with grafana/agent main. This
includes adding support for appending exemplars.
Closes#9610
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* tsdb/agent: fix build error
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* tsdb/agent: introduce some exemplar tests, refactor tests a little
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* tsdb/agent: address review feedback
- Re-use hash when creating a new series
- Fix typo in exemplar append error
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* tsdb/agent: remove unused AddFast method
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* tsdb/agent: close wal reader after test
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* tsdb/agent: add out-of-order tracking, change series TS in commit
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* address review feedback
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
There was a subtle and nasty bug in listSeriesIterator.Seek.
In addition, the Seek call is defined to be a no-op if the current
position of the iterator is already pointing to a suitable
sample. This commit adds fast paths for this case to several
potentially expensive Seek calls.
Another bug was in concreteSeriesIterator.Seek. It always searched the
whole series and not from the current position of the iterator.
Signed-off-by: beorn7 <beorn@grafana.com>
* Fix panic on WAL replay
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Refactor: introduce walSubsetProcessor
walSubsetProcessor packages up the `processWALSamples()` function and
its input and output channels, helping to clarify how these things
relate.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Refactor: extract more methods onto walSubsetProcessor
This makes the main logic easier to follow.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Fix race warning by locking processWALSamples
Although we have waited for the processor to finish, we still get a
warning from the race detector because it doesn't know how the different
parts relate.
Add a lock round each batch of samples, so the race detector can see
that we never access series owned by the processor outside of a lock.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Added test to reproduce issue 9859
Signed-off-by: Marco Pracucci <marco@pracucci.com>
* Remove redundant unit test
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix out of order chunks during WAL replay
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix nits
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Marco Pracucci <marco@pracucci.com>
Added validation to expected postings length compared to the bytes slice
length. With 32bit postings, we expect to have 4 bytes per each posting.
If the number doesn't add up, we know that the input data is not
compatible with our code (maybe it's cut, or padded with trash, or even
written in a different coded).
This is needed in downstream projects to correctly identify cached
postings written with an unknown codec, but it's also a good idea to
validate it here.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Disable isolation in isolation struct
Signed-off-by: darshanime <deathbullet@gmail.com>
* Run tsdb tests with isolation disabled
Signed-off-by: darshanime <deathbullet@gmail.com>
* Check for isolation disabled in isoState.Close()
Signed-off-by: darshanime <deathbullet@gmail.com>
* use t.Skip to skip isolation tests when disabled
Signed-off-by: darshanime <deathbullet@gmail.com>
* address review comments
Signed-off-by: darshanime <deathbullet@gmail.com>
* fix test for defaultIsolationState
Signed-off-by: darshanime <deathbullet@gmail.com>
* Change flag name. Set flag in DB. Do not init txRing. Close isoState.
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Test disabled isolation in CircleCI test_go
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Skip isolation related tests in db_test.go
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Calling `wal.NewSegmentBufReader()` without any segments would cause a
`panic` resulting in prometheus crashing. This patch fixes the panic by
making segmentBufReader return a EOF if there are not segments.
This also means an empty checkpoint directory which should never be the
case unless it has been tampered with (or has issues due to the
underlying filesystem e.g. NFS) would be ignored by Prometheus and would
continue to run instead of the current behaviour which is to panic.
Fixes: https://github.com/prometheus/prometheus/issues/9605
Signed-off-by: Sunil Thaha <sthaha@redhat.com>
* Add basic initial developer docs for TSDB
There's a decent amount of content already out there (blog posts,
conference talks, etc), but:
* when they get stale, they don't tend to get updated
* they still leave me with questions that I'ld like to answer
for developers (like me) who want to use, or work with, TSDB
What I propose is developer docs inside the prometheus
repository. Easy to find and harness the power of the community
to expand it and keep it up to date.
* perfect is the enemy of good. Let's have a base and incrementally improve
* Markdown docs should be broad but not too deep. Source code comments
can complement them, and are the ideal place for implementation details.
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* use example code that works out of the box
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* Apply suggestions from code review
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* PR feedback
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* more docs
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* PR feedback
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* Apply suggestions from code review
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Apply suggestions from code review
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* feedback
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* Update tsdb/docs/usage.md
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* final tweaks
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* workaround docs versioning issue
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* Move example code to real executable, testable example.
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* cleanup example test and make sure it always reproduces
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* obtain temp dir in a way that works with older Go versions
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* Fix Ganesh's comments
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
* share tsdb db locker code with agent
Closes#9616
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* add flag to disable lockfile for agent
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* use agentOnlySetting instead of PreAction
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* tsdb: address review feedback
1. Rename Locker to DirLocker
2. Move DirLocker to tsdb/tsdbutil
3. Name metric using fmt.Sprintf
4. Refine error checking in DirLocker test
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* tsdb: create test utilities to assert expected DirLocker behavior
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* tsdb/tsdbutil: fix lint errors
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* tsdb/agent: fix windows test failure
Use new DB variable instead of overriding the old one.
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* Add more size checks when writing individual sections in the index.
Signed-off-by: Peter Štibraný <pstibrany@gmail.com>
* Use uint and add comment about it.
Signed-off-by: Peter Štibraný <pstibrany@gmail.com>
* Close agent db in tests
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Close first DB before opening second
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Use seperate variables for different DBs?
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Close remote storage
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Fix closing of stuff
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Remove the build flags after a rebase
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix closing of stuff 2
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Julien Pivotto <roidelapluie@inuits.eu>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
It seems sometimes you can get error like:
Error: Not equal:
expected: []byte(nil)
actual : []byte{}
Diff:
--- Expected
+++ Actual
@@ -1,2 +1,3 @@
-([]uint8) <nil>
+([]uint8) {
+}
This commit does what bytes.Equal does to silence those differences. I'm
not sure if this is a correct solution or just covering up the actual bug.
Closes#9574
Signed-off-by: Mateusz Gozdek <mgozdekof@gmail.com>
This creates a new `model` directory and moves all data-model related
packages over there:
exemplar labels relabel rulefmt textparse timestamp value
All the others are more or less utilities and have been moved to `util`:
gate logging modetimevfs pool runtime
Signed-off-by: beorn7 <beorn@grafana.com>
* TSDB: demistify seriesRefs and ChunkRefs
The TSDB package contains many types of series and chunk references,
all shrouded in uint types. Often the same uint value may
actually mean one of different types, in non-obvious ways.
This PR aims to clarify the code and help navigating to relevant docs,
usage, etc much quicker.
Concretely:
* Use appropriately named types and document their semantics and
relations.
* Make multiplexing and demuxing of types explicit
(on the boundaries between concrete implementations and generic
interfaces).
* Casting between different types should be free. None of the changes
should have any impact on how the code runs.
TODO: Implement BlockSeriesRef where appropriate (for a future PR)
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* feedback
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* agent: demistify seriesRefs and ChunkRefs
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* Allow to disable trimming when querying TSDB
Signed-off-by: Marco Pracucci <marco@pracucci.com>
* Addressed review comments
Signed-off-by: Marco Pracucci <marco@pracucci.com>
* Added unit test
Signed-off-by: Marco Pracucci <marco@pracucci.com>
* Renamed TrimDisabled to DisableTrimming
Signed-off-by: Marco Pracucci <marco@pracucci.com>
We are aware of the issue, but while we are working on it,
having main tests broken is an annoyance.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Initial draft of prometheus-agent
This commit introduces a new binary, prometheus-agent, based on the
Grafana Agent code. It runs a WAL-only version of prometheus without the
TSDB, alerting, or rule evaluations. It is intended to be used to
remote_write to Prometheus or another remote_write receiver.
By default, prometheus-agent will listen on port 9095 to not collide
with the prometheus default of 9090.
Truncation of the WAL cooperates on a best-effort case with Remote
Write. Every time the WAL is truncated, the minimum timestamp of data to
truncate is determined by the lowest sent timestamp of all samples
across all remote_write endpoints. This gives loose guarantees that data
from the WAL will not try to be removed until the maximum sample
lifetime passes or remote_write starts functionining.
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* add tests for Prometheus agent (#22)
* add tests for Prometheus agent
* add tests for Prometheus agent
* rearranged tests as per the review comments
* update tests for Agent
* changes as per code review comments
Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com>
* incremental changes to prometheus agent
Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com>
* changes as per code review comments
Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com>
* Commit feedback from code review
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* Port over some comments from grafana/agent
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* Rename agent.Storage to agent.DB for tsdb consistency
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* Consolidate agentMode ifs in cmd/prometheus/main.go
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* Document PreAction usage requirements better for agent mode flags
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* remove unnecessary defaultListenAddr
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* `go fmt ./tsdb/agent` and fix lint errors
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
Co-authored-by: SriKrishna Paparaju <paparaju@gmail.com>
* Use dedicated Ref type
Throughout the code base, there are reference types masked as
regular integers. Let's use dedicated types. They are
equivalent, but clearer semantically.
This also makes it trivial to find where they are used,
and from uses, find the centralized docs.
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* postpone some work until after possible return
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* clarify
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* rename feedback
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* skip header is up to caller
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* Call delete on head if interval overlaps
Signed-off-by: darshanime <deathbullet@gmail.com>
* Garbage collect tombstones during head gc
Signed-off-by: darshanime <deathbullet@gmail.com>
* Truncate tombstones before min time during head gc
Signed-off-by: darshanime <deathbullet@gmail.com>
* Lock less by deleting all keys in a single pass
Signed-off-by: darshanime <deathbullet@gmail.com>
* Pass map to DeleteTombstones
Signed-off-by: darshanime <deathbullet@gmail.com>
* Create new slice to replace old one
Signed-off-by: darshanime <deathbullet@gmail.com>
* Decrement active_appenders metric when no samples added
Also add a test that the metric is incremented and decremented as
expected with and without samples.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Fix comment
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
This saves memory, effort and locking.
Since every symbol is also added to postings, `Symbols()` can be
implemented there instead. This now has to build a map for
deduplication, but `Symbols()` is only called for compaction, and `gc()`
used to rebuild the symbols map after every compaction so not an
additional cost.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
The previous code re-used series IDs 1-1000 many times over, so a lot
of time was spent ensuring the lists of series were in ascending order.
The intended use of `MemPostings.Add()` is that all series IDs are
unique, and changing the benchmark to do this lets it finish ten times
faster.
(It doesn't affect the benchmark result, just the setup code)
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* PromQL: Fix start and end keywords masking label and metric names
This commit fixes an issue with the "at modifier" that introduced two
new keywords: `start` and `end`. In grouping options and in metric
names, these keywords took precedence over metric or label names, so
that those metrics and labels could no longer be referenced.
Signed-off-by: Clayton Peters <clayton.peters@man.com>
* Add in additional tests for metrics and/or labels called start/end.
Signed-off-by: Clayton Peters <clayton.peters@man.com>
* *: Cut 2.29.0-rc.0
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* VERSION: bump to 2.29.0-rc.0
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* Remove experimental wording on size-based retention
Followup of #9004
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Fix PR reference in changelog
Signed-off-by: George Brighton <george@gebn.co.uk>
* Describe EC2 availability zone IDs at most once per refresh (#9142)
Signed-off-by: George Brighton <george@gebn.co.uk>
* Describe EC2 availability zones at most once per SD load
Closes#9142.
Signed-off-by: George Brighton <george@gebn.co.uk>
* Incorporate feedback
Signed-off-by: George Brighton <george@gebn.co.uk>
* Integrate feedback
Signed-off-by: George Brighton <george@gebn.co.uk>
* Add a compatibility note for macOS users.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* *: Cut v2.29.0-rc.1
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* Fix `kuma_sd` targetgroup reporting (#9157)
* Bundle all xDS targets into a single group
Signed-off-by: austin ce <austin.cawley@gmail.com>
* *: cut v2.29.0-rc.2
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* Rename links
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* bump codemirror-promql to 0.17.0
Signed-off-by: Augustin Husson <husson.augustin@gmail.com>
* *: cut v2.29.0
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* tsdb: align atomically accessed int64 (#9192)
This prevents a panic in 32-bit archs:
https://pkg.go.dev/sync/atomic#pkg-note-BUGFixed#9190
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Release 2.29.1 (#9193)
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
Co-authored-by: Clayton Peters <clayton.peters@man.com>
Co-authored-by: Frederic Branczyk <fbranczyk@gmail.com>
Co-authored-by: George Brighton <george@gebn.co.uk>
Co-authored-by: Austin Cawley-Edwards <austin.cawley@gmail.com>
Co-authored-by: Levi Harrison <git@leviharrison.dev>
Co-authored-by: Augustin Husson <husson.augustin@gmail.com>
* BenchmarkLoadWAL: close WAL after use
So that goroutines are stopped and resources released
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* BenchmarkLoadWAL: make series IDs co-prime with #workers
Series are distributed across workers by taking the modulus of the
ID with the number of workers, so multiples of 100 are a poor choice.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* BenchmarkLoadWAL: simulate mmapped chunks
Real Prometheus cuts chunks every 120 samples, then skips those samples
when re-reading the WAL. Simulate this by creating a single mapped chunk
for each series, since the max time is all the reader looks at.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Fix comment
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Remove series map from processWALSamples()
The locks that is commented to reduce contention in are now sharded
32,000 ways, so won't be contended. Removing the map saves memory and
goes just as fast.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* loadWAL: Cache the last mmapped chunk time
So we can skip calling append() for samples it will reject.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Improvements from code review
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Full stops and capitals on comments
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Cache max time in both places mmappedChunks is updated
Including refactor to extract function `setMMappedChunks`, to reduce
code duplication.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Update head min/max time when mmapped chunks added
This ensures we have the correct values if no WAL samples are added for
that series.
Note that `mSeries.maxTime()` was always `math.MinInt64` before, since
that function doesn't consider mmapped chunks.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Avoid deadlock when processing duplicate series record
`processWALSamples()` needs to be able to send on its output channel
before it can read the input channel, so reads to allow this in case the
output channel is full.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* processWALSamples: update comment
Previous text seems to relate to an earlier implementation.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
I was struggling to understand the purpose of this method until I
tweaked the tests, so I decided to write down my observations.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Refactor: pass segment-reading function as param
To allow a different implementation to be used when garbage-collecting.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* remote_write: reduce blocking from GC of series
Add a method `UpdateSeriesSegment()` which is used together with
`SeriesReset()` to garbage-collect old series. This allows us to
split the lock around queueManager series data and avoid blocking
`Append()` while reading series from the last checkpoint.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Cosmetic: review feedback on comments
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* remote-write benchmark: include GC of series
Reduce the total number of samples per iteration from 5000*5000
(25 million) which is too big for my laptop, to 1*10000.
Extend `createTimeseries()` to add additional labels, so that the
queue manager is doing more realistic work.
Move the Append() call to a background goroutine - this works because
TestWriteClient uses a WaitGroup to signal completion.
Call `StoreSeries()` and `SeriesReset()` while adding samples, to
simulate the garbage-collection that wal.Watcher does.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Change BenchmarkSampleDelivery to call UpdateSeriesSegment
This matches what Watcher.garbageCollectSeries() is doing now
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* tsdb: use dennwc/varint to speed up decoding
This is a tiny library, MIT-licensed, which unrolls the loop to go
about twice as fast.
Needed to copy the sign-inverting logic inline, previously provided by
the `binary` package.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* More comments to explain varint decoding
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Previously it was allocating millions of chunks, all containing the
same 250 samples. Above some ratio of CPU performance to available
memory, the benchmark cannot run.
Make 250 a const and just allocate one chunk which we iterate
repeatedly till we reach the benchmark count.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Push the matchers for LabelNames all the way into the index.
NB This doesn't actually implement it in the index, just plumbs it through for now...
Signed-off-by: Tom Wilkie <tom@grafana.com>
* Hack it up. Does not work.
Signed-off-by: Tom Wilkie <tom@grafana.com>
* Revert changes I don't understand
Can't see why do we need to hold a mutex on symbols, and the purpose of
the LabelNamesFor method.
Maybe I'll need to re-add this later.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Implement LabelNamesFor
This method provides the label names that appear in the postings
provided. We do that deeper than the label values because we know
beforehand that most of the label names we'll be the same across
different postings, and we don't want to go down an up looking up the
same symbols for all different series.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Mutex on symbols should be unlocked
However, I still don't understand why do we need a mutex here.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Fix head.LabelNamesFor
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Implement mockIndex LabelNames with matchers
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Nitpick on slice initialisation
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Add tests for LabelNamesWithMatchers
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Fix the mutex mess on head.LabelValues/LabelNames
I still don't see why we need to grab that unrelated mutex, but at least
now we're grabbing it consistently
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Check error after iterating postings
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Use the error from posting when there was en error in postings
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Update storage/interface.go comment
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Update tsdb/index/index.go comment
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Update tsdb/index/index.go wrapped error msg
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Update tsdb/index/index.go wrapped error msg
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Update tsdb/index/index.go warpped error msg
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Remove unneeded comment
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Add testcases for LabelNames w/matchers in api.go
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Use t.Cleanup() instead of defer in tests
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Tom Wilkie <tom@grafana.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Compaction fails when total symbol size exceeds 2^32 bytes.
Signed-off-by: tanghengjian <1040104807@qq.com>
* Compaction fails when total symbol size exceeds 2^32 bytes.
Signed-off-by: tanghengjian <1040104807@qq.com>
* Compaction fails when total symbol size exceeds 2^32 bytes.
Signed-off-by: root <tanghengjian@oppo.com>
Co-authored-by: root <tanghengjian@oppo.com>
* Create experimental circular buffer resize method, benchmarks
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Optimize exemplar resize to only replay as many exemplars as needed
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* More comments, benchmark AddExemplar
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* optimizations
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* comment
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Slight refactor of resize benchmark + make use of resize via runtime
reloadable storage config.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Some more config related changes.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address some review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address more review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Refactor to remove usage of noopExemplarStorage and avoid race condition
when resizing from Head code.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Fix or add comments to clarify some of the new behaviour.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* fix potential panics related to negative exemplar buffer lengths
Signed-off-by: Callum Styan <callumstyan@gmail.com>
Co-authored-by: Callum Styan <callumstyan@gmail.com>
Fetch the low watermark value under the same lock as we need for the
appender, rather than releasing then re-aquiring a lock on the same
Mutex.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
An opinionated cosmetic change, but since go 1.13 we have this fancy
0b.... literals so we don't need to write hex and comment the binary
value.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
lwangrabbit