When the scrape tolerance is bigger than 1% of the scrape interval, take
1% of the scrape interval as the tolerance instead of not aligning the
scrape at all.
Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>
Native Histograms: support native_histogram_min_bucket_factor in scrape_config
---------
Signed-off-by: Ziqi Zhao <zhaoziqi9146@gmail.com>
Signed-off-by: Björn Rabenstein <github@rabenste.in>
Co-authored-by: George Krajcsovits <krajorama@users.noreply.github.com>
Co-authored-by: Björn Rabenstein <github@rabenste.in>
They are used in multiple repos, so common is a better place for them.
Several packages now don't depend on `model/textparse`, e.g.
`storage/remote`.
Also remove `metadata` struct from `api.go`, since it was identical to
a struct in the `metadata` package.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Append created timestamps.
Signed-off-by: Arthur Silva Sens <arthur.sens@coralogix.com>
* Log when created timestamps are ignored
Signed-off-by: Arthur Silva Sens <arthur.sens@coralogix.com>
* Proposed changes to Append CT PR.
Changes:
* Changed textparse Parser interface for consistency and robustness.
* Changed CT interface to be more explicit and handle validation.
* Simplified test, change scrapeManager to allow testability.
* Added TODOs.
Signed-off-by: bwplotka <bwplotka@gmail.com>
* Updates.
Signed-off-by: bwplotka <bwplotka@gmail.com>
* Addressed comments.
Signed-off-by: bwplotka <bwplotka@gmail.com>
* Refactor head_appender test
Signed-off-by: Arthur Silva Sens <arthur.sens@coralogix.com>
* Fix linter issues
Signed-off-by: Arthur Silva Sens <arthur.sens@coralogix.com>
* Use model.Sample in head appender test
Signed-off-by: Arthur Silva Sens <arthur.sens@coralogix.com>
---------
Signed-off-by: Arthur Silva Sens <arthur.sens@coralogix.com>
Signed-off-by: bwplotka <bwplotka@gmail.com>
Co-authored-by: bwplotka <bwplotka@gmail.com>
Previously we had one per scrapePool, and one of those per configured
scraping job. Each pool holds a few unused buffers, so sharing one
across all scrapePools reduces total heap memory.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Currently Prometheus will always request gzip compression from the target when sending scrape requests.
HTTP compression does reduce the amount of bytes sent over the wire and so is often desirable.
The downside of compression is that it requires extra resources - cpu & memory.
This also affects the resource usage on the target since it has to compress the response
before sending it to Prometheus.
This change adds a new option to the scrape job configuration block: enable_compression.
The default is true so it remains the same as current Prometheus behaviour.
Setting this option to false allows users to disable compression between Prometheus
and the scraped target, which will require more bandwidth but it lowers the resource
usage of both Prometheus and the target.
Fixes#12319.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
Fix and improve ingesting exemplars for native histograms.
See code comment for a detailed explanation of the algorithm.
Note that this changes the current behavior for all kind of samples slightly: We now allow exemplars with the same timestamp as during the last scrape if the value or the labels have changed.
Also note that we now do not ingest exemplars without timestamps for native histograms anymore.
Signed-off-by: Jeanette Tan <jeanette.tan@grafana.com>
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
Co-authored-by: Björn Rabenstein <github@rabenste.in>
---------
Signed-off-by: Jeanette Tan <jeanette.tan@grafana.com>
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
Signed-off-by: zenador <zenador@users.noreply.github.com>
Co-authored-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
Co-authored-by: Björn Rabenstein <github@rabenste.in>
* A registerer is passed to the scrape Manager,
and all scrape metrics register with it.
* For now the registry which we pass to the scrape
Manager is still the global one.
Signed-off-by: Paulin Todev <paulin.todev@gmail.com>
* Added ability to specify scrape protocols to accept during HTTP content type negotiation.
This is done via new option in GlobalConfig and ScrapeConfig: "scrape_protocol"
Signed-off-by: bwplotka <bwplotka@gmail.com>
* Fixed readability and log message.
Signed-off-by: bwplotka <bwplotka@gmail.com>
---------
Signed-off-by: bwplotka <bwplotka@gmail.com>
We don't need the buffer to read the response until the scrape http call
returns; creating it earlier makes the buffer pool larger.
I split `scrape()` into `scrape()` which returns with the http response,
and `readResponse()` which decompresses and copies the data into the
supplied buffer. This design was chosen to minimize impact on the logic.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
`lset` escapes to heap due to being passed through the text-parser
interface, so we can reduce garbage by hoisting it out of the loop so
only one allocation is done for every series in a scrape.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
It's possible (quite common on Kubernetes) to have a service discovery
return thousands of targets then drop most of them in relabel rules.
The main place this data is used is to display in the web UI, where
you don't want thousands of lines of display.
The new limit is `keep_dropped_targets`, which defaults to 0
for backwards-compatibility.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
This has become a requirement for native histograms, as a single
histogram sample commonly has many buckets, so that providing many
exemplars makes sense.
Since OM text doesn't support native histograms yet, the test had to
be expanded to also support protobuf test cases.
Signed-off-by: beorn7 <beorn@grafana.com>
In digital communication, "jitter" usually refers to how much a signal deviates
from true periodicity, see https://en.wikipedia.org/wiki/Jitter. The way we are
using the "jitterSeed" in Prometheus does not affect the true periodicity at
all, but just introduces a constant phase shift (or offset) within the period.
So it would be more correct and less confusing to call the "jitterSeed" an
"offsetSeed" instead.
Signed-off-by: Julius Volz <julius.volz@gmail.com>
So far, if a target exposes a histogram with both classic and native
buckets, a native-histogram enabled Prometheus would ignore the
classic buckets. With the new scrape config option
`scrape_classic_histograms` set, both buckets will be ingested,
creating all the series of a classic histogram in parallel to the
native histogram series. For example, a histogram `foo` would create a
native histogram series `foo` and classic series called `foo_sum`,
`foo_count`, and `foo_bucket`.
This feature can be used in a migration strategy from classic to
native histograms, where it is desired to have a transition period
during which both native and classic histograms are present.
Note that two bugs in classic histogram parsing were found and fixed
as a byproduct of testing the new feature:
1. Series created from classic _gauge_ histograms didn't get the
_sum/_count/_bucket prefix set.
2. Values of classic _float_ histograms weren't parsed properly.
Signed-off-by: beorn7 <beorn@grafana.com>
Wiser coders than myself have come to the conclusion that a `switch`
statement is almost always superior to a statement that includes any
`else if`.
The exceptions that I have found in our codebase are just these two:
* The `if else` is followed by an additional statement before the next
condition (separated by a `;`).
* The whole thing is within a `for` loop and `break` statements are
used. In this case, using `switch` would require tagging the `for`
loop, which probably tips the balance.
Why are `switch` statements more readable?
For one, fewer curly braces. But more importantly, the conditions all
have the same alignment, so the whole thing follows the natural flow
of going down a list of conditions. With `else if`, in contrast, all
conditions but the first are "hidden" behind `} else if `, harder to
spot and (for no good reason) presented differently from the first
condition.
I'm sure the aforemention wise coders can list even more reasons.
In any case, I like it so much that I have found myself recommending
it in code reviews. I would like to make it a habit in our code base,
without making it a hard requirement that we would test on the CI. But
for that, there has to be a role model, so this commit eliminates all
`if else` occurrences, unless it is autogenerated code or fits one of
the exceptions above.
Signed-off-by: beorn7 <beorn@grafana.com>
It took a `Labels` where the memory could be re-used, but in practice
this hardly ever benefitted. Especially after converting `relabel.Process`
to `relabel.ProcessBuilder`.
Comparing the parameter to `nil` was a bug; `EmptyLabels` is not `nil`
so the slice was reallocated multiple times by `append`.
Lastly `Builder.Labels()` now estimates that the final size will depend
on labels added and deleted.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Since the Target object was just created in this function, nobody else
has a reference to it and there are no concerns about it being modified
concurrently so we don't need to copy the value.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Includes a rewrite of `resolveConflictingExposedLabels` to use
`labels.Builder.Get`, which simplifies it considerably.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Common service discovery mechanisms such as Kubernetes can generate a
lot of target groups, so this function was allocating a lot of memory
which then immediately became garbage. Re-using the structures across
an entire Sync saves effort.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
This makes all usage of maps in scrape.go consistent.
Also remove comment about unsafe strings, since we don't use them any
more in this package.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Extends Appender.AppendHistogram function to accept the FloatHistogram. TSDB supports appending, querying, WAL replay, for this new type of histogram.
Signed-off-by: Marc Tudurí <marctc@protonmail.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
The `yolostring` routine was intended to avoid an allocation when
converting from a `[]byte` to a `string` for map lookup.
However, since 2014 Go has recognized this pattern and does not make
a copy of the data when looking up a map. So the unsafe code is not
necessary.
In line with this, constants like `scrapeHealthMetricName` also become
`[]byte`.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
This reinstates the behavior of v2.39. The header got messed up in the
sparsehistogram when the change of the version in main was merged into
it (and the merge conflict had to be resolved).
I don't think the current state will actually break anyone, although
it is technically possible. I propose to merge this into the bugfix
branch in any case, but I think we can wait for other bugfixes before
cutting a v2.40.1. (Unless, of course, somebody reports an actual
breakage because of the header.)
Signed-off-by: beorn7 <beorn@grafana.com>
First of all, there was a typo: `encoding=delimited` was a left-over
in the `scrapeAcceptHeader`.
Second, the recently updated `version=1.0.0` prevents current versions
of client_golang to negotiate OpenMetrics, as they expect
`version=0.0.1` or no version at all. This commit adds, with lower
priority, the latter (no version at all) to the accept header.
Fixes#11540,
Signed-off-by: beorn7 <beorn@grafana.com>
machine424