`head.deleted` holds the WAL segment in use at the time each series was
removed from the head. At the end of `truncateWAL()` we will delete
all segments up to `last`, so we can drop any series that were last seen
in a segment at or before that point.
(same change in Prometheus Agent too)
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
In the past, every sample value was a float, so it was fine to call a
variable holding such a float "value" or "sample". With native
histograms, a sample might have a histogram value. And a histogram
value is still a value. Calling a float value just "value" or "sample"
or "V" is therefore misleading. Over the last few commits, I already
renamed many variables, but this cleans up a few more places where the
changes are more invasive.
Note that we do not to attempt naming in the JSON APIs or in the
protobufs. That would be quite a disruption. However, internally, we
can call variables as we want, and we should go with the option of
avoiding misunderstandings.
Signed-off-by: beorn7 <beorn@grafana.com>
* Use zeropool.Pool to workaround SA6002
I built a tiny library called https://github.com/colega/zeropool to
workaround the SA6002 staticheck issue.
While searching for the references of that SA6002 staticheck issues on
Github first results was Prometheus itself, with quite a lot of ignores
of it.
This changes the usages of `sync.Pool` to `zeropool.Pool[T]` where a
pointer is not available.
Also added a benchmark for HeadAppender Append/Commit when series
already exist, which is one of the most usual cases IMO, as I didn't find
any.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Improve BenchmarkHeadAppender with more cases
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* A little copying is better than a little dependency
https://www.youtube.com/watch?v=PAAkCSZUG1c&t=9m28s
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Fix imports order
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Add license header
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Copyright should be on one of the first 3 lines
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Use require.Equal for testing
I don't depend on testify in my lib, but here we have it available.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Avoid flaky test
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Also use zeropool for pointsPool in engine.go
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
---------
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Without this fix, if snapshots were enabled, and wbl goes missing
between restarts, then TSDB does not recognize that there are ooo
mmap chunks on disk and we cannot query them until those chunks
are compacted into blocks.
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
M-map chunks replayed on startup are discarded if there
was no WAL and no snapshot loaded, because there is no
series created in the Head that it can map to. So only
load m-map chunks from disk if there is either a snapshot
loaded or there is WAL on disk.
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Adds `WALReplayConcurrency` as an option on tsdb `Options` and `HeadOptions`.
If it is not set or set <=0, then `GOMAXPROCS` is used, which matches the previous behaviour.
Signed-off-by: Yuri Nikolic <durica.nikolic@grafana.com>
* Export single ith test histogram generation functions
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
* Do not set counter reset hint for non-gauge histograms individually
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
* Apply suggestions from code review
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: George Krajcsovits <krajorama@users.noreply.github.com>
---------
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
Signed-off-by: George Krajcsovits <krajorama@users.noreply.github.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
This is a bit more conservative than we could be. As long as a chunk
isn't the first in a block, we can be pretty sure that the previous
chunk won't disappear. However, the incremental gain of returning
NotCounterReset in these cases is probably very small and might not be
worth the code complications.
Wwith this, we now also pay attention to an explicitly set counter
reset during ingestion. While the case doesn't show up in practice
yet, there could be scenarios where the metric source knows there was
a counter reset even if it might not be visible from the values in the
histogram. It is also useful for testing.
Signed-off-by: beorn7 <beorn@grafana.com>
Extends Appender.AppendHistogram function to accept the FloatHistogram. TSDB supports appending, querying, WAL replay, for this new type of histogram.
Signed-off-by: Marc Tudurí <marctc@protonmail.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
The wlog.WL type can now be used to create a Write Ahead Log or a Write
Behind Log.
Before the prefix for wbl metrics was
'prometheus_tsdb_out_of_order_wal_' and has been replaced with
'prometheus_tsdb_out_of_order_wbl_'.
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
Signed-off-by: Jesus Vazquez <jesusvazquez@users.noreply.github.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* TSDB chunks: remove race between writing and reading
Because the data is stored as a bit-stream, the last byte in the stream
could change if the stream is appended to after an Iterator is obtained.
Copy the last byte when the Iterator is created, so we don't have to
read it later.
Clarify in comments that concurrent Iterator and Appender are allowed,
but the chunk must not be modified while an Iterator is created.
(This was already the case, in order to copy the bstream slice header.)
* TSDB: stop saving last 4 samples in memSeries
This extra copy of the last 4 samples was introduced to avoid a race
condition between reading the last byte of the chunk and writing to it.
But now we have fixed that by having `bstreamReader` copy the last byte,
we don't need to copy the last 4 samples.
This change saves 56 bytes per series, which is very worthwhile when
you have millions or tens of millions of series.
* TSDB: tidy up stopIterator re-use
Previous changes have left this code duplicating some lines; pull
them out to a separate function and tidy up.
* TSDB head_test: stop checking when iterators are wrapped
The behaviour has changed so chunk iterators are only wrapped when
transaction isolation requires them to stop short of the end.
This makes tests fail which are checking the type.
Tests should check the observable behaviour, not the type.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
* tsdb: add a basic test for read/write isolation
* tsdb: store the min time with isolationAppender
So that we can see when appending has moved past a certain point in time.
* tsdb: allow RangeHead to have isolation disabled
This will be used when for head compaction.
* tsdb: do head compaction with isolation disabled
This saves a lot of work tracking appends done while compaction is ongoing.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* tsdb: remove chunkRange from memSeries
chunkRange is the (oddly-named) configured duration for the head block.
We don't need a copy of this value per series. Pass it down where
required, and remove the copy.
The value in `Head` is only updated in `resetInMemoryState()`, which
also discards all `memSeries`.
* tsdb: remove oooCapMax from memSeries
oooCapMax is the configured maximum capacity for an out-of-order chunk.
Storing it per-series uses extra memory, and has surprising behaviour
if users change the value in config - series created before the change
will keep their old value.
Instead, pass it down where required, and remove the per-series value.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Introduce out-of-order TSDB support
This implementation is based on this design doc:
https://docs.google.com/document/d/1Kppm7qL9C-BJB1j6yb6-9ObG3AbdZnFUBYPNNWwDBYM/edit?usp=sharing
This commit adds support to accept out-of-order ("OOO") sample into the TSDB
up to a configurable time allowance. If OOO is enabled, overlapping querying
are automatically enabled.
Most of the additions have been borrowed from
https://github.com/grafana/mimir-prometheus/
Here is the list ist of the original commits cherry picked
from mimir-prometheus into this branch:
- 4b2198d7ec
- 2836e5513f
- 00b379c3a5
- ff0dc75758
- a632c73352
- c6f3d4ab33
- 5e8406a1d4
- abde1e0ba1
- e70e769889
- df59320886
Co-authored-by: Jesus Vazquez <jesus.vazquez@grafana.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Dieter Plaetinck <dieter@grafana.com>
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* gofumpt files
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Add license header to missing files
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix OOO tests due to existing chunk disk mapper implementation
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix truncate int overflow
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Add Sync method to the WAL and update tests
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* remove useless sync
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Update minOOOTime after truncating Head
* Update minOOOTime after truncating Head
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix lint
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Add a unit test
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Load OutOfOrderTimeWindow only once per appender
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix OOO Head LabelValues and PostingsForMatchers
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix replay of OOO mmap chunks
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Remove unnecessary err check
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Prevent panic with ApplyConfig
Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Run OOO compaction after restart if there is OOO data from WBL
Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Apply Bartek's suggestions
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Refactor OOO compaction
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Address comments and TODOs
- Added a comment explaining why we need the allow overlapping
compaction toggle
- Clarified TSDBConfig OutOfOrderTimeWindow doc
- Added an owner to all the TODOs in the code
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Run go format
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix remaining review comments
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix tests
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Change wbl reference when truncating ooo in TestHeadMinOOOTimeUpdate
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix TestWBLAndMmapReplay test failure on windows
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Address most of the feedback
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Refactor the block meta for out of order
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix windows error
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix review comments
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Dieter Plaetinck <dieter@grafana.com>
Co-authored-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
The chunk pool belongs to the head not to the series. Pass it down where
required, and remove the copy of the pointer that `memSeries` was
holding.
`safeChunk` also needs to hold it, because in scenarios where it is used
we don't have a reference to the head. However it was already holding
`chunkDiskMapper` for the same reason, so no big change.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Add runtime config to control native histogram ingestion
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Make the config into a CLI flag
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Metadata was added recently but doesn't seem to be used much, at least as far as I could identify.
Yet it's part of memSeries struct and so even when empty takes 48 bytes,
which is a lot given that without it memSeries requires 224 bytes.
This change turns it into a pointer on the struct, that get set only when metadata is actually set of given series.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
* Append metadata to the WAL
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Remove extra whitespace; Reword some docstrings and comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use RLock() for hasNewMetadata check
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use single byte for metric type in RefMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Update proposed WAL format for single-byte type metadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Implementa MetadataAppender interface for the Agent
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Address first round of review comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Amend description of metadata in wal.md
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Correct key used to retrieve metadata from cache
When we're setting metadata entries in the scrapeCace, we're using the
p.Help(), p.Unit(), p.Type() helpers, which retrieve the series name and
use it as the cache key. When checking for cache entries though, we used
p.Series() as the key, which included the metric name _with_ its labels.
That meant that we were never actually hitting the cache. We're fixing
this by utiling the __name__ internal label for correctly getting the
cache entries after they've been set by setHelp(), setType() or
setUnit().
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Put feature behind a feature flag
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix AppendMetadata docstring
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Reorder WAL format document
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Change error message of AppendMetadata; Fix access of s.meta in AppendMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Reuse temporary buffer in Metadata encoder
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Only keep latest metadata for each refID during checkpointing
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix test that's referencing decoding metadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Avoid creating metadata block if no new metadata are present
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add tests for corrupt metadata block and relevant record type
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix CR comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Extract logic about changing metadata in an anonymous function
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Implement new proposed WAL format and amend relevant tests
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use 'const' for metadata field names
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Apply metadata to head memSeries in Commit, not in AppendMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add docstring and rename extracted helper in scrape.go
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add tests for tsdb-related cases
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix linter issues vol1
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix linter issues vol2
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix Windows test by closing WAL reader files
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use switch instead of two if statements in metadata decoding
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix review comments around TestMetadata* tests
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add code for replaying WAL; test correctness of in-memory data after a replay
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Remove scrape-loop related code from PR
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Address first round of comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Simplify tests by sorting slices before comparison
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix test to use separate transactions
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Empty out buffer and record slices after encoding latest metadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix linting issue
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Update calculation for DroppedMetadata metric
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Rename MetadataAppender interface and AppendMetadata method to MetadataUpdater/UpdateMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Reuse buffer when encoding latest metadata for each series
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix review comments; Check all returned error values using two helpers
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Simplify use of helpers
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Satisfy linter
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Write chunks via queue, predicting the refs
Our load tests have shown that there is a latency spike in the
remote write handler whenever the head chunks need to be written,
because chunkDiskMapper.WriteChunk() blocks until the chunks are written
to disk.
This adds a queue to the chunk disk mapper which makes the WriteChunk()
method non-blocking unless the queue is full. Reads can still be served
from the queue.
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* address PR feeddback
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* initialize metrics without .Add(0)
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* change isRunningMtx to normal lock
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* do not re-initialize chunkrefmap
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* update metric outside of lock scope
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* add benchmark for adding job to chunk write queue
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* remove unnecessary "success" var
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* gofumpt -extra
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* avoid WithLabelValues call in addJob
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* format comments
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* addressing PR feedback
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* rename cutExpectRef to cutAndExpectRef
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* use head.Init() instead of .initTime()
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* address PR feedback
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* PR feedback
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* update test according to PR feedback
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* replace callbackWg -> awaitCb
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* better test of truncation with empty files
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
* replace callbackWg -> awaitCb
Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
The atomic Int64 type wasn't able to be represented when logging
via go-kit log and ended up as `"unsupported value type"`.
Signed-off-by: Nick Pillitteri <nick.pillitteri@grafana.com>
- Pick At... method via return value of Next/Seek.
- Do not clobber returned buckets.
- Add partial FloatHistogram suppert.
Note that the promql package is now _only_ dealing with
FloatHistograms, following the idea that PromQL only knows float
values.
As a byproduct, I have removed the histogramSeries metric. In my
understanding, series can have both float and histogram samples, so
that metric doesn't make sense anymore.
As another byproduct, I have converged the sampleBuf and the
histogramSampleBuf in memSeries into one. The sample type stored in
the sampleBuf has been extended to also contain histograms even before
this commit.
Signed-off-by: beorn7 <beorn@grafana.com>
* Support appending different sample types to the same series
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix comments
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix build
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Disable isolation in isolation struct
Signed-off-by: darshanime <deathbullet@gmail.com>
* Run tsdb tests with isolation disabled
Signed-off-by: darshanime <deathbullet@gmail.com>
* Check for isolation disabled in isoState.Close()
Signed-off-by: darshanime <deathbullet@gmail.com>
* use t.Skip to skip isolation tests when disabled
Signed-off-by: darshanime <deathbullet@gmail.com>
* address review comments
Signed-off-by: darshanime <deathbullet@gmail.com>
* fix test for defaultIsolationState
Signed-off-by: darshanime <deathbullet@gmail.com>
* Change flag name. Set flag in DB. Do not init txRing. Close isoState.
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Test disabled isolation in CircleCI test_go
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Skip isolation related tests in db_test.go
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Add basic initial developer docs for TSDB
There's a decent amount of content already out there (blog posts,
conference talks, etc), but:
* when they get stale, they don't tend to get updated
* they still leave me with questions that I'ld like to answer
for developers (like me) who want to use, or work with, TSDB
What I propose is developer docs inside the prometheus
repository. Easy to find and harness the power of the community
to expand it and keep it up to date.
* perfect is the enemy of good. Let's have a base and incrementally improve
* Markdown docs should be broad but not too deep. Source code comments
can complement them, and are the ideal place for implementation details.
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* use example code that works out of the box
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* Apply suggestions from code review
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* PR feedback
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* more docs
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* PR feedback
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* Apply suggestions from code review
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Apply suggestions from code review
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* feedback
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* Update tsdb/docs/usage.md
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* final tweaks
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* workaround docs versioning issue
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* Move example code to real executable, testable example.
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* cleanup example test and make sure it always reproduces
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* obtain temp dir in a way that works with older Go versions
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* Fix Ganesh's comments
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
This is to avoid copying the many fields of a histogram.Histogram all
the time.
This also fixes a bunch of formerly broken tests.
Signed-off-by: beorn7 <beorn@grafana.com>
This creates a new `model` directory and moves all data-model related
packages over there:
exemplar labels relabel rulefmt textparse timestamp value
All the others are more or less utilities and have been moved to `util`:
gate logging modetimevfs pool runtime
Signed-off-by: beorn7 <beorn@grafana.com>
* TSDB: demistify seriesRefs and ChunkRefs
The TSDB package contains many types of series and chunk references,
all shrouded in uint types. Often the same uint value may
actually mean one of different types, in non-obvious ways.
This PR aims to clarify the code and help navigating to relevant docs,
usage, etc much quicker.
Concretely:
* Use appropriately named types and document their semantics and
relations.
* Make multiplexing and demuxing of types explicit
(on the boundaries between concrete implementations and generic
interfaces).
* Casting between different types should be free. None of the changes
should have any impact on how the code runs.
TODO: Implement BlockSeriesRef where appropriate (for a future PR)
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* feedback
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* agent: demistify seriesRefs and ChunkRefs
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* Use dedicated Ref type
Throughout the code base, there are reference types masked as
regular integers. Let's use dedicated types. They are
equivalent, but clearer semantically.
This also makes it trivial to find where they are used,
and from uses, find the centralized docs.
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* postpone some work until after possible return
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* clarify
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* rename feedback
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* skip header is up to caller
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
A lot of this code was hacked together, literally during a
hackathon. This commit intends not to change the code substantially,
but just make the code obey the usual style practices.
A (possibly incomplete) list of areas:
* Generally address linter warnings.
* The `pgk` directory is deprecated as per dev-summit. No new packages should
be added to it. I moved the new `pkg/histogram` package to `model`
anticipating what's proposed in #9478.
* Make the naming of the Sparse Histogram more consistent. Including
abbreviations, there were just too many names for it: SparseHistogram,
Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in
general. Only add "Sparse" if it is needed to avoid confusion with
conventional Histograms (which is rare because the TSDB really has no notion
of conventional Histograms). Use abbreviations only in local scope, and then
really abbreviate (not just removing three out of seven letters like in
"Histo"). This is in the spirit of
https://github.com/golang/go/wiki/CodeReviewComments#variable-names
* Several other minor name changes.
* A lot of formatting of doc comments. For one, following
https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences
, but also layout question, anticipating how things will look like
when rendered by `godoc` (even where `godoc` doesn't render them
right now because they are for unexported types or not a doc comment
at all but just a normal code comment - consistency is queen!).
* Re-enabled `TestQueryLog` and `TestEndopints` (they pass now,
leaving them disabled was presumably an oversight).
* Bucket iterator for histogram.Histogram is now created with a
method.
* HistogramChunk.iterator now allows iterator recycling. (I think
@dieterbe only commented it out because he was confused by the
question in the comment.)
* HistogramAppender.Append panics now because we decided to treat
staleness marker differently.
Signed-off-by: beorn7 <beorn@grafana.com>
* Call delete on head if interval overlaps
Signed-off-by: darshanime <deathbullet@gmail.com>
* Garbage collect tombstones during head gc
Signed-off-by: darshanime <deathbullet@gmail.com>
* Truncate tombstones before min time during head gc
Signed-off-by: darshanime <deathbullet@gmail.com>
* Lock less by deleting all keys in a single pass
Signed-off-by: darshanime <deathbullet@gmail.com>
* Pass map to DeleteTombstones
Signed-off-by: darshanime <deathbullet@gmail.com>
* Create new slice to replace old one
Signed-off-by: darshanime <deathbullet@gmail.com>
This saves memory, effort and locking.
Since every symbol is also added to postings, `Symbols()` can be
implemented there instead. This now has to build a map for
deduplication, but `Symbols()` is only called for compaction, and `gc()`
used to rebuild the symbols map after every compaction so not an
additional cost.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Remove query hacks in the API and fix metrics
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Tests for the metrics
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Better way to count series on restart
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* PromQL: Fix start and end keywords masking label and metric names
This commit fixes an issue with the "at modifier" that introduced two
new keywords: `start` and `end`. In grouping options and in metric
names, these keywords took precedence over metric or label names, so
that those metrics and labels could no longer be referenced.
Signed-off-by: Clayton Peters <clayton.peters@man.com>
* Add in additional tests for metrics and/or labels called start/end.
Signed-off-by: Clayton Peters <clayton.peters@man.com>
* *: Cut 2.29.0-rc.0
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* VERSION: bump to 2.29.0-rc.0
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* Remove experimental wording on size-based retention
Followup of #9004
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Fix PR reference in changelog
Signed-off-by: George Brighton <george@gebn.co.uk>
* Describe EC2 availability zone IDs at most once per refresh (#9142)
Signed-off-by: George Brighton <george@gebn.co.uk>
* Describe EC2 availability zones at most once per SD load
Closes#9142.
Signed-off-by: George Brighton <george@gebn.co.uk>
* Incorporate feedback
Signed-off-by: George Brighton <george@gebn.co.uk>
* Integrate feedback
Signed-off-by: George Brighton <george@gebn.co.uk>
* Add a compatibility note for macOS users.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* *: Cut v2.29.0-rc.1
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* Fix `kuma_sd` targetgroup reporting (#9157)
* Bundle all xDS targets into a single group
Signed-off-by: austin ce <austin.cawley@gmail.com>
* *: cut v2.29.0-rc.2
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* Rename links
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* bump codemirror-promql to 0.17.0
Signed-off-by: Augustin Husson <husson.augustin@gmail.com>
* *: cut v2.29.0
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* tsdb: align atomically accessed int64 (#9192)
This prevents a panic in 32-bit archs:
https://pkg.go.dev/sync/atomic#pkg-note-BUGFixed#9190
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Release 2.29.1 (#9193)
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
Co-authored-by: Clayton Peters <clayton.peters@man.com>
Co-authored-by: Frederic Branczyk <fbranczyk@gmail.com>
Co-authored-by: George Brighton <george@gebn.co.uk>
Co-authored-by: Austin Cawley-Edwards <austin.cawley@gmail.com>
Co-authored-by: Levi Harrison <git@leviharrison.dev>
Co-authored-by: Augustin Husson <husson.augustin@gmail.com>
* Fix `kuma_sd` targetgroup reporting (#9157)
* Bundle all xDS targets into a single group
Signed-off-by: austin ce <austin.cawley@gmail.com>
* Snapshot in-memory chunks on shutdown for faster restarts (#7229)
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Rename links
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Remove Individual Data Type Caps in Per-shard Buffering for Remote Write (#8921)
* Moved everything to nPending buffer
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Simplify exemplar capacity addition
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added pre-allocation
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Don't allocate if not sending exemplars
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Avoid deadlock when processing duplicate series record (#9170)
* Avoid deadlock when processing duplicate series record
`processWALSamples()` needs to be able to send on its output channel
before it can read the input channel, so reads to allow this in case the
output channel is full.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* processWALSamples: update comment
Previous text seems to relate to an earlier implementation.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Optimise WAL loading by removing extra map and caching min-time (#9160)
* BenchmarkLoadWAL: close WAL after use
So that goroutines are stopped and resources released
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* BenchmarkLoadWAL: make series IDs co-prime with #workers
Series are distributed across workers by taking the modulus of the
ID with the number of workers, so multiples of 100 are a poor choice.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* BenchmarkLoadWAL: simulate mmapped chunks
Real Prometheus cuts chunks every 120 samples, then skips those samples
when re-reading the WAL. Simulate this by creating a single mapped chunk
for each series, since the max time is all the reader looks at.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Fix comment
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Remove series map from processWALSamples()
The locks that is commented to reduce contention in are now sharded
32,000 ways, so won't be contended. Removing the map saves memory and
goes just as fast.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* loadWAL: Cache the last mmapped chunk time
So we can skip calling append() for samples it will reject.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Improvements from code review
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Full stops and capitals on comments
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Cache max time in both places mmappedChunks is updated
Including refactor to extract function `setMMappedChunks`, to reduce
code duplication.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Update head min/max time when mmapped chunks added
This ensures we have the correct values if no WAL samples are added for
that series.
Note that `mSeries.maxTime()` was always `math.MinInt64` before, since
that function doesn't consider mmapped chunks.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Split Go and React Tests (#8897)
* Added go-ci and react-ci
Co-authored-by: Julien Pivotto <roidelapluie@inuits.eu>
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Remove search keymap from new expression editor (#9184)
Signed-off-by: Julius Volz <julius.volz@gmail.com>
Co-authored-by: Austin Cawley-Edwards <austin.cawley@gmail.com>
Co-authored-by: Levi Harrison <git@leviharrison.dev>
Co-authored-by: Julien Pivotto <roidelapluie@inuits.eu>
Co-authored-by: Bryan Boreham <bjboreham@gmail.com>
Co-authored-by: Julius Volz <julius.volz@gmail.com>
* BenchmarkLoadWAL: close WAL after use
So that goroutines are stopped and resources released
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* BenchmarkLoadWAL: make series IDs co-prime with #workers
Series are distributed across workers by taking the modulus of the
ID with the number of workers, so multiples of 100 are a poor choice.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* BenchmarkLoadWAL: simulate mmapped chunks
Real Prometheus cuts chunks every 120 samples, then skips those samples
when re-reading the WAL. Simulate this by creating a single mapped chunk
for each series, since the max time is all the reader looks at.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Fix comment
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Remove series map from processWALSamples()
The locks that is commented to reduce contention in are now sharded
32,000 ways, so won't be contended. Removing the map saves memory and
goes just as fast.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* loadWAL: Cache the last mmapped chunk time
So we can skip calling append() for samples it will reject.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Improvements from code review
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Full stops and capitals on comments
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Cache max time in both places mmappedChunks is updated
Including refactor to extract function `setMMappedChunks`, to reduce
code duplication.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Update head min/max time when mmapped chunks added
This ensures we have the correct values if no WAL samples are added for
that series.
Note that `mSeries.maxTime()` was always `math.MinInt64` before, since
that function doesn't consider mmapped chunks.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
I was struggling to understand the purpose of this method until I
tweaked the tests, so I decided to write down my observations.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Push the matchers for LabelNames all the way into the index.
NB This doesn't actually implement it in the index, just plumbs it through for now...
Signed-off-by: Tom Wilkie <tom@grafana.com>
* Hack it up. Does not work.
Signed-off-by: Tom Wilkie <tom@grafana.com>
* Revert changes I don't understand
Can't see why do we need to hold a mutex on symbols, and the purpose of
the LabelNamesFor method.
Maybe I'll need to re-add this later.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Implement LabelNamesFor
This method provides the label names that appear in the postings
provided. We do that deeper than the label values because we know
beforehand that most of the label names we'll be the same across
different postings, and we don't want to go down an up looking up the
same symbols for all different series.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Mutex on symbols should be unlocked
However, I still don't understand why do we need a mutex here.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Fix head.LabelNamesFor
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Implement mockIndex LabelNames with matchers
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Nitpick on slice initialisation
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Add tests for LabelNamesWithMatchers
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Fix the mutex mess on head.LabelValues/LabelNames
I still don't see why we need to grab that unrelated mutex, but at least
now we're grabbing it consistently
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Check error after iterating postings
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Use the error from posting when there was en error in postings
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Update storage/interface.go comment
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Update tsdb/index/index.go comment
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Update tsdb/index/index.go wrapped error msg
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Update tsdb/index/index.go wrapped error msg
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Update tsdb/index/index.go warpped error msg
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Remove unneeded comment
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Add testcases for LabelNames w/matchers in api.go
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Use t.Cleanup() instead of defer in tests
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Tom Wilkie <tom@grafana.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Create experimental circular buffer resize method, benchmarks
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Optimize exemplar resize to only replay as many exemplars as needed
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* More comments, benchmark AddExemplar
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* optimizations
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* comment
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Slight refactor of resize benchmark + make use of resize via runtime
reloadable storage config.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Some more config related changes.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address some review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address more review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Refactor to remove usage of noopExemplarStorage and avoid race condition
when resizing from Head code.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Fix or add comments to clarify some of the new behaviour.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* fix potential panics related to negative exemplar buffer lengths
Signed-off-by: Callum Styan <callumstyan@gmail.com>
Co-authored-by: Callum Styan <callumstyan@gmail.com>
Fetch the low watermark value under the same lock as we need for the
appender, rather than releasing then re-aquiring a lock on the same
Mutex.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Bryan Boreham