* remote-write: slow down retries to avoid DDOS
Increase the default max retry time from 100ms to 5 seconds.
Remote write calls are retried after a recoverable error such as the
back-end returning 500. Prometheus waits the minimum time and retries,
then doubles the wait on each subsequent retry until the maximum is
reached.
If some data is still getting through, remote-write will also increase
shards, and the default maximum is 200. 200 shards sending every 100ms
is 20 calls per second, to a back-end that is already in trouble.
5 seconds was chosen to match the default BatchSendDeadline: if we can
afford to wait that long for no response, then we can wait the same time
to retry. We will reach 5 seconds after 9 successive failures.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Update config doc for max_backoff change
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Add a feature flag to enable the new manager
This PR creates a copy of the legacy manager and uses it by default.
It is a companion PR to #9349. With this PR, users can enable the new
discovery manager and provide us with any feedback / side effects that
the new behaviour might have.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
We have been Puppet user for 10 years and we are users of
https://github.com/camptocamp/prometheus-puppetdb-sd
However, that file_sd implementation contains business logic and
assumptions around e.g. the modules which you are using.
This pull request adds a simple PuppetDB service discovery, which will
enable more use cases than the upstream sd.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
This adds a new metric exposing per target scrape sample_limit value. Metrics are only exposed if extra-scrape-metrics feature flag is enabled.
scrape_sample_limit will make it easy to monitor and alert on targets getting close to configured sample_limit, which is important given than exceeding sample_limit results in the entire scrape results being rejected.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
Add a new built-in metric `scrape_timeout_seconds` to allow monitoring
of the ratio of scrape duration to the scrape timeout. Hide behind a
feature flag to avoid additional cardinality by default.
Signed-off-by: SuperQ <superq@gmail.com>
* PromQL: Fix start and end keywords masking label and metric names
This commit fixes an issue with the "at modifier" that introduced two
new keywords: `start` and `end`. In grouping options and in metric
names, these keywords took precedence over metric or label names, so
that those metrics and labels could no longer be referenced.
Signed-off-by: Clayton Peters <clayton.peters@man.com>
* Add in additional tests for metrics and/or labels called start/end.
Signed-off-by: Clayton Peters <clayton.peters@man.com>
* *: Cut 2.29.0-rc.0
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* VERSION: bump to 2.29.0-rc.0
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* Remove experimental wording on size-based retention
Followup of #9004
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Fix PR reference in changelog
Signed-off-by: George Brighton <george@gebn.co.uk>
* Describe EC2 availability zone IDs at most once per refresh (#9142)
Signed-off-by: George Brighton <george@gebn.co.uk>
* Describe EC2 availability zones at most once per SD load
Closes#9142.
Signed-off-by: George Brighton <george@gebn.co.uk>
* Incorporate feedback
Signed-off-by: George Brighton <george@gebn.co.uk>
* Integrate feedback
Signed-off-by: George Brighton <george@gebn.co.uk>
* Add a compatibility note for macOS users.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* *: Cut v2.29.0-rc.1
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* Fix `kuma_sd` targetgroup reporting (#9157)
* Bundle all xDS targets into a single group
Signed-off-by: austin ce <austin.cawley@gmail.com>
* *: cut v2.29.0-rc.2
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* Rename links
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* bump codemirror-promql to 0.17.0
Signed-off-by: Augustin Husson <husson.augustin@gmail.com>
* *: cut v2.29.0
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* tsdb: align atomically accessed int64 (#9192)
This prevents a panic in 32-bit archs:
https://pkg.go.dev/sync/atomic#pkg-note-BUGFixed#9190
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Release 2.29.1 (#9193)
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
Co-authored-by: Clayton Peters <clayton.peters@man.com>
Co-authored-by: Frederic Branczyk <fbranczyk@gmail.com>
Co-authored-by: George Brighton <george@gebn.co.uk>
Co-authored-by: Austin Cawley-Edwards <austin.cawley@gmail.com>
Co-authored-by: Levi Harrison <git@leviharrison.dev>
Co-authored-by: Augustin Husson <husson.augustin@gmail.com>
* optimize Linode SD by polling for event changes during refresh
Most accounts are fairly "static", in the sense that they're not cycling
through instances constantly. So rather than do a full refresh every
interval and potentially make several behind-the-scenes paginated API
calls, this will now poll the `/account/events/` endpoint every minute
with a list of events that we care about. If a matching event is found,
we then do a full refresh.
Co-authored-by: William Smith <wsmith@linode.com>
Signed-off-by: TJ Hoplock <t.hoplock@gmail.com>
Signed-off-by: William Smith <wsmith@linode.com>
* promtool: backfill: allow configuring block duration
When backfilling large amounts of data across long periods of time, it
may in certain circumstances be useful to use a longer block duration to
increase the efficiency and speed of the backfilling process. This patch
adds a flag --block-duration-power to allow a user to choose the power N
where the block duration is 2^(N+1)h.
Signed-off-by: Steve Kuznetsov <skuznets@redhat.com>
* promtool: use sub-tests in backfill testing
Signed-off-by: Steve Kuznetsov <skuznets@redhat.com>
* backfill: add messages to tests for clarity
When someone new breaks a test, seeing "expected: false, got: true" is
really not useful. A nice message helps here.
Signed-off-by: Steve Kuznetsov <skuznets@redhat.com>
* backfill: test long block durations
A test that uses a long block duration to write bigger blocks is added.
The check to make sure all blocks are the default duration is removed.
Signed-off-by: Steve Kuznetsov <skuznets@redhat.com>
* Added MaxSamplesPerSend
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added tests
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Fixed order of require
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added docs
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* writes -> writesReceived
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Improved send loop
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Cut v2.28.0-rc.0 (#8954)
* Cut v2.28.0-rc.0
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Changelog fixup
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Address review comments
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Downgrade some features to enhancements
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Adjust release date to today
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Migrate HTTP SD docs from docs repo (#8972)
See discussion in https://github.com/prometheus/docs/pull/1975
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Cut Prometheus v2.28.0 (#8973)
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Added walreplay API endpoint
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added starting page to react-ui
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Documented the new endpoint
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Fixed typos
Signed-off-by: Levi Harrison <git@leviharrison.dev>
Co-authored-by: Julius Volz <julius.volz@gmail.com>
* Removed logo
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Changed isResponding to isUnexpected
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Changed width of progress bar
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Changed width of progress bar
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added DB stats object
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Updated starting page to work with new fields
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Passing nil
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Passing nil (pt. 2)
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Passing nil (pt. 3)
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Passing nil (and also implementing a method this time) (pt. 4)
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Passing nil (and also implementing a method this time) (pt. 5)
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Changed const to let
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Passing nil (pt. 6)
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Remove SetStats method
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added comma
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Changed api
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Changed to triple equals
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Fixed data response types
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Don't return pointer
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Changed version
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Fixed interface issue
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Fixed pointer
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Fixed copying lock value error
Signed-off-by: Levi Harrison <git@leviharrison.dev>
Co-authored-by: Julius Volz <julius.volz@gmail.com>
* Write exemplars to the WAL and send them over remote write.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Update example for exemplars, print data in a more obvious format.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Add metrics for remote write of exemplars.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Fix incorrect slices passed to send in remote write.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* We need to unregister the new metrics.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address review comments
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Order of exemplar append vs write exemplar to WAL needs to change.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Condense sample/exemplar delivery tests to parameterized sub-tests
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Rename test methods for clarity now that they also handle exemplars
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Rename counter variable. Fix instances where metrics were not updated correctly
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Add exemplars to LoadWAL benchmark
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* last exemplars timestamp metric needs to convert value to seconds with
ms precision
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Process exemplar records in a separate go routine when loading the WAL.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address review comments related to clarifying comments and variable
names. Also refactor sample/exemplar to enqueue prompb types.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Regenerate types proto with comments, update protoc version again.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Put remote write of exemplars behind a feature flag.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address some of Ganesh's review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Move exemplar remote write feature flag to a config file field.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address Bartek's review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Don't allocate exemplar buffers in queue_manager if we're not going to
send exemplars over remote write.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Add ValidateExemplar function, validate exemplars when appending to head
and log them all to WAL before adding them to exemplar storage.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address more reivew comments from Ganesh.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Add exemplar total label length check.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address a few last review comments
Signed-off-by: Callum Styan <callumstyan@gmail.com>
Co-authored-by: Martin Disibio <mdisibio@gmail.com>
* scrape: add label limits per scrape
Add three new limits to the scrape configuration to provide some
mechanism to defend against unbound number of labels and excessive
label lengths. If any of these limits are broken by a sample from a
scrape, the whole scrape will fail. For all of these configuration
options, a zero value means no limit.
The `label_limit` configuration will provide a mechanism to bound the
number of labels per-scrape of a certain sample to a user defined limit.
This limit will be tested against the sample labels plus the discovery
labels, but it will exclude the __name__ from the count since it is a
mandatory Prometheus label to which applying constraints isn't
meaningful.
The `label_name_length_limit` and `label_value_length_limit` will
prevent having labels of excessive lengths. These limits also skip the
__name__ label for the same reasons as the `label_limit` option and will
also make the scrape fail if any sample has a label name/value length
that exceed the predefined limits.
Signed-off-by: Damien Grisonnet <dgrisonn@redhat.com>
* scrape: add metrics and alert to label limits
Add three gauge, one for each label limit to easily access the
limit set by a certain scrape target.
Also add a counter to count the number of targets that exceeded the
label limits and thus were dropped. This is useful for the
`PrometheusLabelLimitHit` alert that will notify the users that scraping
some targets failed because they had samples exceeding the label limits
defined in the scrape configuration.
Signed-off-by: Damien Grisonnet <dgrisonn@redhat.com>
* scrape: apply label limits to __name__ label
Apply limits to the __name__ label that was previously skipped and
truncate the label names and values in the error messages as they can be
very very long.
Signed-off-by: Damien Grisonnet <dgrisonn@redhat.com>
* scrape: remove label limits gauges and refactor
Remove `prometheus_target_scrape_pool_label_limit`,
`prometheus_target_scrape_pool_label_name_length_limit`, and
`prometheus_target_scrape_pool_label_value_length_limit` as they are not
really useful since we don't have the information on the labels in it.
Signed-off-by: Damien Grisonnet <dgrisonn@redhat.com>
Clarify documentation for label_replace() because of ambiguities
between label keys and label values.
Signed-off-by: Matthew Smedberg <matthew.smedberg@gmail.com>
* Enable parsing strings in humanize functions
This is useful to humanize count_values or buckets labels.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
Prometheus adds the ability to read secrets from files. This add
this feature for the scaleway service discovery.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Document lack of metadata deletion in deletion API
See also https://github.com/prometheus/prometheus/issues/7932
I also fixed the other "NOTE" callouts to be formatted in such a way that our
docs system formats them as callout boxes.
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* WIP
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Improve wordings
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Contribute grafana/agent sigv4 code
* address review feedback
- move validation logic for RemoteWrite into unmarshal
- copy configuration fields from ec2 SD config
- remove enabled field, use pointer for enabling sigv4
* Update config/config.go
* Don't provide credentials if secret key / access key left blank
* Add SigV4 headers to the list of unchangeable headers.
* sigv4: don't include all headers in signature
* only test for equality in the authorization header, not the signed date
* address review feedback
1. s/httpClientConfigEnabled/httpClientConfigAuthEnabled
2. bearer_token tuples to "authorization"
3. Un-export NewSigV4RoundTripper
* add x-amz-content-sha256 to list of unchangeable headers
* Document sigv4 configuration
* add suggestion for using default AWS SDK credentials
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
Co-authored-by: Julien Pivotto <roidelapluie@gmail.com>
This PR introduces support for follow_redirect, to enable users to
disable following HTTP redirects.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
The label `__meta_digitalocean_image` expose the `slug` of the image and
the `slug` is only present in the public images.
To refer a user-generated image (`snapshot` or `custom`) we can use
the image's display name.
See: https://developers.digitalocean.com/documentation/v2/#images
Signed-off-by: Matteo Valentini <matteo.valentini@nethesis.it>
- Remove unrelated changes
- Refactor code out of the API module - that is already getting pretty crowded.
- Don't track reference for AddFast in remote write. This has the potential to consume unlimited server-side memory if a malicious client pushes a different label set for every series. For now, its easier and safer to always use the 'slow' path.
- Return 400 on out of order samples.
- Use remote.DecodeWriteRequest in the remote write adapters.
- Put this behing the 'remote-write-server' feature flag
- Add some (very) basic docs.
- Used named return & add test for commit error propagation
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
This commit adds `@ <timestamp>` modifier as per this design doc: https://docs.google.com/document/d/1uSbD3T2beM-iX4-Hp7V074bzBRiRNlqUdcWP6JTDQSs/edit.
An example query:
```
rate(process_cpu_seconds_total[1m])
and
topk(7, rate(process_cpu_seconds_total[1h] @ 1234))
```
which ranks based on last 1h rate and w.r.t. unix timestamp 1234 but actually plots the 1m rate.
Signed-off-by: Ganesh Vernekar <cs15btech11018@iith.ac.in>
Improve the documentation to clarify the differences beetween rules in a
group and outside a group.
Signed-off-by: Thibault Jamet <tjamet@users.noreply.github.com>
commit 9875afc491 changed the type from
metric names to label values, we might as well adjust the description.
The alternative is to revert that commit and restrict names of alerting
rules again even if that was not really enforced.
Signed-off-by: Peter Wu <pwu@cloudflare.com>
The React app's assets are now served under /assets, while all old
custom web assets (including the ones for console templates) are now
served from /classic/static.
I tested different combinations of --web.external-url and
--web.route-prefix with proxies in front, and I couldn't find a problem
yet with the routing. Console templates also still work.
While migrating old endpoints to /classic, I noticed that /version was
being treated like a lot of the old UI pages, with readiness check
handler in front of it, etc. I kept it in /version and removed that
readiness wrapper, since it doesn't seem to be needed for that endpoint.
Signed-off-by: Julius Volz <julius.volz@gmail.com>
`promtool update rules` is no longer available after Prometheus 2.5.
Document this to avoid confusion such as in #6988.
Signed-off-by: Christian Hoffmann <mail@hoffmann-christian.info>
The documentation referenced "data volume containers", which were
superseded by named volume support in Docker several years ago.
There were to bind-mounting examples in the docs that are effectively
doing the same thing, but the description of the second was somewhat
erroneous.
Signed-off-by: Lars Kellogg-Stedman <lars@redhat.com>
The links fix makes the links point to the current version of the files,
e.g. the relase branch.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
Sadly, just linking to the Histogram best practice document, as done
for `histogram_quantile`, would be confusing here because the best
practice document only deals with quantiles in the context of
Histograms and Summaries, which is very different from the context of
the `quantile` aggregator and `quantile_over_time` function, which is
already a source of a lot of confusion.
Thus, I think the least bad solution is to add a short explanation in
this section directly. There isn't even a good resource on the
internet we can link to. A lot of statisticians use φ-quantiles, but
they don't have a generally accepted name for it.
I have added the explanation after the other detailed explanations of
`count_values`, `topk` and `bottomk`. I think that fits quite nicely
into the flow.
Signed-off-by: beorn7 <beorn@grafana.com>
* OpenStack SD: Add availability config option, to choose endpoint type
In some environments Prometheus must query OpenStack via an alternative
endpoint type (gophercloud calls this `availability`.
This commit implements this option.
Co-Authored-By: Dennis Kuhn <d.kuhn@syseleven.de>
Signed-off-by: Steffen Neubauer <s.neubauer@syseleven.de>
* add time range params to labelNames api
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* evaluate min/max time range when reading labels from the head
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* add time range params to labelValues api
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* fix test, add docs
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* add a test for head min max range
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* fix test to match comment
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* address CR comments
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* combine vars only used once
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* add time range params to labelNames api
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* evaluate min/max time range when reading labels from the head
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* add time range params to labelValues api
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* fix test, add docs
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* add a test for head min max range
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* fix test to match comment
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* address CR comments
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* combine vars only used once
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* fix test
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* restart ci
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* use range expectedLabelNames instead of range actualLabelNames in test
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
Added optional configuration item role, defaults to 'container' (backwards-compatible).
Setting role to 'cn' will discover compute nodes instead.
Human-friendly compute node hostname discovery depends on cmon 1.7.0:
c1a2aeca36
Adjust testcases to use discovery config per case as two different types are now supported.
Updated documentation:
* new role setting
* clarify what the name 'container' covers as triton uses different names in different locations
Signed-off-by: jzinkweg <jzinkweg@gmail.com>
- Reduce the level of entry to start gathering metrics with prometheus
by suggesting to just download pre-built exporters instead of requiring
the reader to download an entire Golang build chain and checkout a project.
Fix#6956
Signed-off-by: Harold Dost <h.dost@criteo.com>
Add extra meta labels which will be useful in the case
Prometheus discovery hypervisor .
Signed-off-by: pzqu <pzqu@qq.com>
Co-authored-by: pzqu <pzqu@example.com>
One of our users today asked us if dashes were allowed in recording rule names.
We asserted that they were not, but also that we could not remember for certain.
After determining empirically that they are _not_ allowed, I realized that the
documentation could be slightly clearer about valid rule names.
This PR simply adds a note to the documentation re-iterating that the rules must
be valid metric names - and more importantly, adds a link to where a user can
read what those *are*, in case they were not aware (or did not know where to find it).
Signed-off-by: Andrew Hayworth <ahayworth@gmail.com>
* Added the version to tsdb stats api methods
* Updated changelog.md with references to the status page PRs
Signed-off-by: Joaquin Fernandez Campo <jfcampo@gmail.com>
The curl argument `--data-urlencode` doesn't accept equal signs between
the arg and the value, but needs whitespace instead.
Signed-off-by: Clayton O'Neill <claytono@github.com>
This adds support for a new query param on the new `api/v1/metadata`
endpoint that provides metadata for a specified metric via the V1 API.
It collapses metadata that is equal across all targets, and aggregates
under the same metric name the ones that differ.
Signed-off-by: gotjosh <josue@grafana.com>
* api: provide per metric metadata
This adds a new endpoint that provides per metric metadata via the V1 API.
It collapses metadata that is equal across all targets, and aggregates under the same metric name the ones that differ.
* Allow tests to be asserted on response length
Some tests e.g. limit on API responses, don't require an assertion on
equality.
This allows us to assert against response length instead of
equality.
Signed-off-by: gotjosh <josue@grafana.com>
* Document new status API endpoints
These were added in https://github.com/prometheus/prometheus/pull/6243
for the React UI.
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Update new-in notices
Signed-off-by: Julius Volz <julius.volz@gmail.com>
Update the aggregation operator documentation.
* Include before expression style syntax as valid.
* Update examples to show before style.
Signed-off-by: Ben Kochie <superq@gmail.com>
* docs: update unit testing rules
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* More nits fixed
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
The desired shards calculation now properly keeps track of the rate of
pending samples, and uses the previously unused integralAccumulator to
adjust for missing information in the desired shards calculation.
Also, configure more capacity for each shard. The default 10 capacity
causes shards to block on each other while
sending remote requests. Default to a 500 sample capacity and explain in
the documentation that having more capacity will help throughput.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
* Make compaction docs a little more clear, easy to find.
* Expand compaction docs slightly.
* Add notes about block cleanup to operational section.
Signed-off-by: Ben Kochie <superq@gmail.com>
Previously, the wording could be misunderstood as setting honor_labels
to "false" for federation.
This also adds scraping the Pushgateway as a typical use case for
honor_labels=true.
Signed-off-by: beorn7 <beorn@grafana.com>
Document the behavior of an empty `ec2_sd_config` `region` setting. If this is
omitted or blank, the region is discovered from the instance metadata, if available.
If it is blank and instance region metadata is not available, an error will
result ("EC2 SD configuration requires a region").
Signed-off-by: Svend Sorensen <svend@svends.net>
With v0.16.0 Alertmanager introduced a new API (v2). This patch adds a
configuration option for Prometheus to send alerts to the v2 endpoint
instead of the defautl v1 endpoint.
Signed-off-by: Max Leonard Inden <IndenML@gmail.com>
Lots of alerts are based on ratios (eg. disk usage), and humans are used
to values in percentage in textual descriptions.
Signed-off-by: Jens Erat <email@jenserat.de>
Substring matching for labels doesn't work anymore.
These parts are misleading, and contradict with the rest of the
documentation.
Signed-off-by: Semyon Slepov <slepovss@gmail.com>
This commit improves the wording of the subquery examples and makes
them more consistent with other examples.
Signed-off-by: Lucas Servén Marín <lserven@gmail.com>
Add extra meta labels which will be useful in the case
Prometheus discovery instances from all projects.
Signed-off-by: Kien Nguyen <kiennt2609@gmail.com>
Currently, the lastest version is **2.7**. But the version in web page is **2.0**.
So this commit aims to update the URL to the latest version of **prometheus.io**
Co-Authored-By: Nguyen Phuong An <AnNP@vn.fujitsu.com>
Signed-off-by: Kim Bao Long <longkb@vn.fujitsu.com>
Currently, when we access the modified pages with **HTTP**, it is
redirected to **HTTPS** automatically. So this commit aims to
replace **HTTP** to **HTTPs** for security.
Co-Authored-By: Nguyen Phuong An <AnNP@vn.fujitsu.com>
Signed-off-by: Kim Bao Long <longkb@vn.fujitsu.com>
Although it is spelling mistakes, it might make an affects while reading.
Co-Authored-By: Nguyen Phuong An <AnNP@vn.fujitsu.com>
Signed-off-by: Kim Bao Long <longkb@vn.fujitsu.com>
* discovery/kubernetes: fix support for password_file
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* Create and pass custom RoundTripper to Kubernetes client
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* Use inline HTTPClientConfig
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* Add flag for size based retention
Signed-off-by: Goutham Veeramachaneni <gouthamve@gmail.com>
* Deprecate the old retention flag for a new one.
Signed-off-by: Goutham Veeramachaneni <gouthamve@gmail.com>
* Add ability to take a suffix for size flag
Signed-off-by: Goutham Veeramachaneni <gouthamve@gmail.com>
* Address feedback
Signed-off-by: Goutham Veeramachaneni <gouthamve@gmail.com>
* add logic to check if an azure VM is deallocated or not
* update documentation with the new azure power state label
Signed-off-by: tariqibrahim <tariq.ibrahim@microsoft.com>
* Adding private_dns_name to the list of ec2 labels which can be used in node naming for dynamic environments
Signed-off-by: Serghei Anicheev <serghei@rentalcover.com>
Set __meta_ec2_platform label with the instance platform string. Set to 'windows' on Windows servers and absent otherwise.
Signed-off-by: Silvio Gissi <silvio@gissilabs.com>
By default, OpenStack SD only queries for instances
from specified project. To discover instances from other
projects, users have to add more openstack_sd_configs for
each project.
This patch adds `all_tenants` <bool> options to
openstack_sd_configs. For example:
- job_name: 'openstack_all_instances'
openstack_sd_configs:
- role: instance
region: RegionOne
identity_endpoint: http://<identity_server>/identity/v3
username: <username>
password: <super_secret_password>
domain_name: Default
all_tenants: true
Co-authored-by: Kien Nguyen <kiennt2609@gmail.com>
Signed-off-by: dmatosl <danielmatos.lima@gmail.com>
Additionally, add triton groups metadata to the discovery reponse
and correct a documentation error regarding the triton server id
metadata.
Signed-off-by: Richard Kiene <richard.kiene@joyent.com>
* Inital support for Azure VMSS
Signed-off-by: Johannes Scheuermann <johannes.scheuermann@inovex.de>
* Add documentation for the newly introduced label
Signed-off-by: Johannes M. Scheuermann <joh.scheuer@gmail.com>
Bryan Boreham