prometheus

Commit Graph

Author	SHA1	Message	Date
Oleg Zaytsev	6e2905a4d4	Use zeropool.Pool to workaround SA6002 (#12189 ) * Use zeropool.Pool to workaround SA6002 I built a tiny library called https://github.com/colega/zeropool to workaround the SA6002 staticheck issue. While searching for the references of that SA6002 staticheck issues on Github first results was Prometheus itself, with quite a lot of ignores of it. This changes the usages of `sync.Pool` to `zeropool.Pool[T]` where a pointer is not available. Also added a benchmark for HeadAppender Append/Commit when series already exist, which is one of the most usual cases IMO, as I didn't find any. Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Improve BenchmarkHeadAppender with more cases Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * A little copying is better than a little dependency https://www.youtube.com/watch?v=PAAkCSZUG1c&t=9m28s Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Fix imports order Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Add license header Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Copyright should be on one of the first 3 lines Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Use require.Equal for testing I don't depend on testify in my lib, but here we have it available. Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Avoid flaky test Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Also use zeropool for pointsPool in engine.go Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> --------- Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>	2 years ago
Abhijit Mukherjee	8f6d5dcd45	Fix: getting rid of EncOOOXOR chunk encoding (#12111 ) Signed-off-by: mabhi <abhijit.mukherjee@infracloud.io>	2 years ago
Vishal N	96ba6831ae	Observe delta in seconds prometheus_tsdb_sample_ooo_delta Signed-off-by: Vishal Nadagouda <vishalmn1996@gmail.com>	2 years ago
beorn7	1cfc8f65a3	histograms: Return actually useful counter reset hints This is a bit more conservative than we could be. As long as a chunk isn't the first in a block, we can be pretty sure that the previous chunk won't disappear. However, the incremental gain of returning NotCounterReset in these cases is probably very small and might not be worth the code complications. Wwith this, we now also pay attention to an explicitly set counter reset during ingestion. While the case doesn't show up in practice yet, there could be scenarios where the metric source knows there was a counter reset even if it might not be visible from the values in the histogram. It is also useful for testing. Signed-off-by: beorn7 <beorn@grafana.com>	2 years ago
beorn7	57c18420ab	histograms: General readability tweaks - Adjust doc comments to go1.19 style. - Break down some overly long lines. - Minor doc comment tweaks and fixes. - Some renaming. Some rationales for the last point: I have renamed “interjections” into “inserts”, mostly because it is shorter, and the word shows up a lot by now (and the concept is cryptic enough to not obfuscate it even more with abbreviations). I have also tried to find more descriptive naming for the “compare spans” functions. Signed-off-by: beorn7 <beorn@grafana.com>	2 years ago
Mingjie Shao	78d3c4e823	tsdb: Fixed typo in Histogram Signed-off-by: Mingjie Shao <com.jerryshao@jerryshao.com>	2 years ago
Ganesh Vernekar	cb2be6e62f	Merge pull request #11779 from codesome/memseries-ooo tsdb: Only initialise out-of-order fields when required	2 years ago
Ganesh Vernekar	38fa151a7c	tsdb: Only initialise out-of-order fields when required Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	2 years ago
beorn7	6dcd03dbf3	tsdb: Add integer gauge histogram support This follows what #11783 has done for float gauge histograms. Signed-off-by: beorn7 <beorn@grafana.com>	2 years ago
Ganesh Vernekar	609b12d719	tsdb: Support gauge float histogram with recoding of chunk Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	2 years ago
Ganesh Vernekar	2820e327db	tsdb: Add staleness handling for FloatHistogram Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	2 years ago
Ganesh Vernekar	e555469ba1	tsdb: Remove isHistogramSeries from memSeries Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	2 years ago
Marc Tudurí	9474610baf	Support FloatHistogram in TSDB (#11522 ) Extends Appender.AppendHistogram function to accept the FloatHistogram. TSDB supports appending, querying, WAL replay, for this new type of histogram. Signed-off-by: Marc Tudurí <marctc@protonmail.com> Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>	2 years ago
Bryan Boreham	543c318ec2	Update package tsdb for new labels.Labels type Signed-off-by: Bryan Boreham <bjboreham@gmail.com>	2 years ago
Bryan Boreham	6bdecf377c	Switch from 'sanity' to more inclusive lanuage (#9376 ) * Switch from 'sanity' to more inclusive lanuage "Removing ableist language in code is important; it helps to create and maintain an environment that welcomes all developers of all backgrounds, while emphasizing that we as developers select the most articulate, precise, descriptive language we can rather than relying on metaphors. The phrase sanity check is ableist, and unnecessarily references mental health in our code bases. It denotes that people with mental illnesses are inferior, wrong, or incorrect, and the phrase sanity continues to be used by employers and other individuals to discriminate against these people." From https://gist.github.com/seanmhanson/fe370c2d8bd2b3228680e38899baf5cc Signed-off-by: Bryan Boreham <bjboreham@gmail.com>	2 years ago
Ganesh Vernekar	42633bd05c	Merge pull request #11485 from t00350320/prometheus-office GetRefByhash() will query a label's ref with hash value rather than lset.Hash().	2 years ago
tanghengjian	982007ecab	GetRefByhash will query a label's ref with hash value rather than lset.Hash(). Signed-off-by: tanghengjian <1040104807@qq.com>	2 years ago
Signed-off-by: Jesus Vazquez	3362bf6d79	Fix merge conflicts Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>	2 years ago
Jesus Vazquez	e934d0f011	Merge 'main' into sparsehistogram Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>	2 years ago
Ganesh Vernekar	d0a6488c74	Update metrics for histograms Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	2 years ago
Bryan Boreham	d166da7b59	tsdb: stop saving a copy of last 4 samples in memSeries (#11296 ) * TSDB chunks: remove race between writing and reading Because the data is stored as a bit-stream, the last byte in the stream could change if the stream is appended to after an Iterator is obtained. Copy the last byte when the Iterator is created, so we don't have to read it later. Clarify in comments that concurrent Iterator and Appender are allowed, but the chunk must not be modified while an Iterator is created. (This was already the case, in order to copy the bstream slice header.) * TSDB: stop saving last 4 samples in memSeries This extra copy of the last 4 samples was introduced to avoid a race condition between reading the last byte of the chunk and writing to it. But now we have fixed that by having `bstreamReader` copy the last byte, we don't need to copy the last 4 samples. This change saves 56 bytes per series, which is very worthwhile when you have millions or tens of millions of series. * TSDB: tidy up stopIterator re-use Previous changes have left this code duplicating some lines; pull them out to a separate function and tidy up. * TSDB head_test: stop checking when iterators are wrapped The behaviour has changed so chunk iterators are only wrapped when transaction isolation requires them to stop short of the end. This makes tests fail which are checking the type. Tests should check the observable behaviour, not the type. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>	2 years ago
Bryan Boreham	ff00dee262	tsdb: turn off transaction isolation for head compaction (#11317 ) * tsdb: add a basic test for read/write isolation * tsdb: store the min time with isolationAppender So that we can see when appending has moved past a certain point in time. * tsdb: allow RangeHead to have isolation disabled This will be used when for head compaction. * tsdb: do head compaction with isolation disabled This saves a lot of work tracking appends done while compaction is ongoing. Signed-off-by: Bryan Boreham <bjboreham@gmail.com>	2 years ago
Bryan Boreham	d0607435a2	tsdb: remove chunkRange and oooCapMax from memSeries (#11288 ) * tsdb: remove chunkRange from memSeries chunkRange is the (oddly-named) configured duration for the head block. We don't need a copy of this value per series. Pass it down where required, and remove the copy. The value in `Head` is only updated in `resetInMemoryState()`, which also discards all `memSeries`. * tsdb: remove oooCapMax from memSeries oooCapMax is the configured maximum capacity for an out-of-order chunk. Storing it per-series uses extra memory, and has surprising behaviour if users change the value in config - series created before the change will keep their old value. Instead, pass it down where required, and remove the per-series value. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>	2 years ago
Jesus Vazquez	c1b669bf9b	Add out-of-order sample support to the TSDB (#11075 ) * Introduce out-of-order TSDB support This implementation is based on this design doc: https://docs.google.com/document/d/1Kppm7qL9C-BJB1j6yb6-9ObG3AbdZnFUBYPNNWwDBYM/edit?usp=sharing This commit adds support to accept out-of-order ("OOO") sample into the TSDB up to a configurable time allowance. If OOO is enabled, overlapping querying are automatically enabled. Most of the additions have been borrowed from https://github.com/grafana/mimir-prometheus/ Here is the list ist of the original commits cherry picked from mimir-prometheus into this branch: - `4b2198d7ec` - `2836e5513f` - `00b379c3a5` - `ff0dc75758` - `a632c73352` - `c6f3d4ab33` - `5e8406a1d4` - `abde1e0ba1` - `e70e769889` - `df59320886` Co-authored-by: Jesus Vazquez <jesus.vazquez@grafana.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: Dieter Plaetinck <dieter@grafana.com> Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * gofumpt files Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Add license header to missing files Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix OOO tests due to existing chunk disk mapper implementation Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix truncate int overflow Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Add Sync method to the WAL and update tests Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * remove useless sync Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Update minOOOTime after truncating Head * Update minOOOTime after truncating Head Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix lint Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Add a unit test Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Load OutOfOrderTimeWindow only once per appender Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix OOO Head LabelValues and PostingsForMatchers Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix replay of OOO mmap chunks Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Remove unnecessary err check Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Prevent panic with ApplyConfig Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Run OOO compaction after restart if there is OOO data from WBL Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Apply Bartek's suggestions Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com> Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Refactor OOO compaction Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Address comments and TODOs - Added a comment explaining why we need the allow overlapping compaction toggle - Clarified TSDBConfig OutOfOrderTimeWindow doc - Added an owner to all the TODOs in the code Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Run go format Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix remaining review comments Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix tests Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Change wbl reference when truncating ooo in TestHeadMinOOOTimeUpdate Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix TestWBLAndMmapReplay test failure on windows Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Address most of the feedback Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Refactor the block meta for out of order Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix windows error Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix review comments Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: Dieter Plaetinck <dieter@grafana.com> Co-authored-by: Oleg Zaytsev <mail@olegzaytsev.com> Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>	2 years ago
Ganesh Vernekar	2474c6fb2c	Error on amending histograms on append (#11308 ) * Error on amending histograms on append Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Rename Matches to Equals Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	2 years ago
Ganesh Vernekar	d354f20c2a	Add a feature flag to control native histogram ingestion (#11253 ) * Add runtime config to control native histogram ingestion Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Make the config into a CLI flag Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	2 years ago
Julien Pivotto	ec6c1f17d1	Update dependencies (#11287 ) Updating dependencies following CI changes and move to go 1.19 Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>	2 years ago
Ganesh Vernekar	f540c1dbd3	Add support for histograms in WAL checkpointing (#11210 ) * Add support for histograms in WAL checkpointing Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix review comments Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix tests Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	2 years ago
Ganesh Vernekar	d209a29a5b	Add unit test for histogram append and various querying scenarios (#11194 ) * Add unit test for histogram append and various querying scenarios Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * make lint happy Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix tests Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix review comments Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	2 years ago
Łukasz Mierzwa	3196c98bc2	Reduce memSeries memory usage by decoupling metadata (#11152 ) Metadata was added recently but doesn't seem to be used much, at least as far as I could identify. Yet it's part of memSeries struct and so even when empty takes 48 bytes, which is a lot given that without it memSeries requires 224 bytes. This change turns it into a pointer on the struct, that get set only when metadata is actually set of given series. Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com> Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>	2 years ago
beorn7	c9fd3c235d	Merge branch 'main' into sparsehistogram	2 years ago
Levi Harrison	77a7af4461	Add histogram validation (#11052 ) * Add histogram validation Signed-off-by: Levi Harrison <git@leviharrison.dev> * Correct negative offset validation Signed-off-by: Levi Harrison <git@leviharrison.dev> * Address review comments Signed-off-by: Levi Harrison <git@leviharrison.dev> * Validation benchmark Signed-off-by: Levi Harrison <git@leviharrison.dev> * Add more checks Signed-off-by: Levi Harrison <git@leviharrison.dev> * Attempt to fix tests Signed-off-by: Levi Harrison <git@leviharrison.dev> * Fix stuff Signed-off-by: Levi Harrison <git@leviharrison.dev>	2 years ago
Levi Harrison	cb8582637a	Implement rollback for histograms (#11071 ) Signed-off-by: Levi Harrison <git@leviharrison.dev>	2 years ago
Paschalis Tsilias	d1122e0743	Introduce TSDB changes for appending metadata to the WAL (#10972 ) * Append metadata to the WAL Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Remove extra whitespace; Reword some docstrings and comments Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Use RLock() for hasNewMetadata check Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Use single byte for metric type in RefMetadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Update proposed WAL format for single-byte type metadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Implementa MetadataAppender interface for the Agent Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Address first round of review comments Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Amend description of metadata in wal.md Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Correct key used to retrieve metadata from cache When we're setting metadata entries in the scrapeCace, we're using the p.Help(), p.Unit(), p.Type() helpers, which retrieve the series name and use it as the cache key. When checking for cache entries though, we used p.Series() as the key, which included the metric name _with_ its labels. That meant that we were never actually hitting the cache. We're fixing this by utiling the __name__ internal label for correctly getting the cache entries after they've been set by setHelp(), setType() or setUnit(). Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Put feature behind a feature flag Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix AppendMetadata docstring Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Reorder WAL format document Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Change error message of AppendMetadata; Fix access of s.meta in AppendMetadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Reuse temporary buffer in Metadata encoder Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Only keep latest metadata for each refID during checkpointing Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix test that's referencing decoding metadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Avoid creating metadata block if no new metadata are present Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Add tests for corrupt metadata block and relevant record type Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix CR comments Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Extract logic about changing metadata in an anonymous function Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Implement new proposed WAL format and amend relevant tests Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Use 'const' for metadata field names Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Apply metadata to head memSeries in Commit, not in AppendMetadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Add docstring and rename extracted helper in scrape.go Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Add tests for tsdb-related cases Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix linter issues vol1 Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix linter issues vol2 Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix Windows test by closing WAL reader files Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Use switch instead of two if statements in metadata decoding Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix review comments around TestMetadata* tests Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Add code for replaying WAL; test correctness of in-memory data after a replay Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Remove scrape-loop related code from PR Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Address first round of comments Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Simplify tests by sorting slices before comparison Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix test to use separate transactions Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Empty out buffer and record slices after encoding latest metadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix linting issue Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Update calculation for DroppedMetadata metric Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Rename MetadataAppender interface and AppendMetadata method to MetadataUpdater/UpdateMetadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Reuse buffer when encoding latest metadata for each series Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix review comments; Check all returned error values using two helpers Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Simplify use of helpers Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Satisfy linter Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>	2 years ago
beorn7	49be0784b4	tsdb: Fix chunk handling during histogram recoding Previously, the maxTime wasn't updated properly in case of a recoding happening. My apologies for reformatting many lines for line length. During the bug hunt, I tried to make things more readable in a reasonably wide editor window. Signed-off-by: beorn7 <beorn@grafana.com>	2 years ago
beorn7	3bc711e333	Merge branch 'main' into sparsehistogram	3 years ago
Oleg Zaytsev	af0f6da5cb	Fix chunk overflow appending samples at a variable rate (#10607 ) * Add a test with variable samples rate append This test overflows the chunk created in memseries, and the total amount of samples in the (only) mmapped chunk is 29, instead of the 65565 appended ones. Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Cut new chunk when rate prediction was wrong When appending samples at a slow rate, and then appending at a higher rate, the prediction we made to cut a new chunk is no longer valid. Sometimes this can even cause an overflow in the chunk, if more samples than uint16 can hold are appended. Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Improve comment on 2samplesPerChunk Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> Assert that all chunks have less than 240 samples Also, trigger new chunk at 240, not at more than 240 Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>	3 years ago
beorn7	4210aac74a	Merge branch 'main' into sparsehistogram	3 years ago
Dieter Plaetinck	aa8874bc56	clarify Head.appendableMinValidTime (#10303 ) Signed-off-by: Dieter Plaetinck <dieter@grafana.com>	3 years ago
Mauro Stettler	0df3489275	Write chunks via queue, predicting the refs (#10051 ) * Write chunks via queue, predicting the refs Our load tests have shown that there is a latency spike in the remote write handler whenever the head chunks need to be written, because chunkDiskMapper.WriteChunk() blocks until the chunks are written to disk. This adds a queue to the chunk disk mapper which makes the WriteChunk() method non-blocking unless the queue is full. Reads can still be served from the queue. Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * address PR feeddback Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * initialize metrics without .Add(0) Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * change isRunningMtx to normal lock Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * do not re-initialize chunkrefmap Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * update metric outside of lock scope Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * add benchmark for adding job to chunk write queue Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * remove unnecessary "success" var Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * gofumpt -extra Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * avoid WithLabelValues call in addJob Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * format comments Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * addressing PR feedback Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * rename cutExpectRef to cutAndExpectRef Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * use head.Init() instead of .initTime() Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * address PR feedback Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * PR feedback Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com> Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * update test according to PR feedback Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * replace callbackWg -> awaitCb Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * better test of truncation with empty files Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> * replace callbackWg -> awaitCb Signed-off-by: Mauro Stettler <mauro.stettler@gmail.com> Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>	3 years ago
Björn Rabenstein	7e42acd3b1	tsdb: Rework iterators (#9877 ) - Pick At... method via return value of Next/Seek. - Do not clobber returned buckets. - Add partial FloatHistogram suppert. Note that the promql package is now _only_ dealing with FloatHistograms, following the idea that PromQL only knows float values. As a byproduct, I have removed the histogramSeries metric. In my understanding, series can have both float and histogram samples, so that metric doesn't make sense anymore. As another byproduct, I have converged the sampleBuf and the histogramSampleBuf in memSeries into one. The sample type stored in the sampleBuf has been extended to also contain histograms even before this commit. Signed-off-by: beorn7 <beorn@grafana.com>	3 years ago
Ganesh Vernekar	26c0a433f5	Support appending different sample types to the same series (#9705 ) * Support appending different sample types to the same series Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix comments Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix build Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>	3 years ago
Darshan Chaudhary	9dcf8b2208	Add the ability to disable tsdb isolation (#9270 ) * Disable isolation in isolation struct Signed-off-by: darshanime <deathbullet@gmail.com> * Run tsdb tests with isolation disabled Signed-off-by: darshanime <deathbullet@gmail.com> * Check for isolation disabled in isoState.Close() Signed-off-by: darshanime <deathbullet@gmail.com> * use t.Skip to skip isolation tests when disabled Signed-off-by: darshanime <deathbullet@gmail.com> * address review comments Signed-off-by: darshanime <deathbullet@gmail.com> * fix test for defaultIsolationState Signed-off-by: darshanime <deathbullet@gmail.com> * Change flag name. Set flag in DB. Do not init txRing. Close isoState. Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Test disabled isolation in CircleCI test_go Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Skip isolation related tests in db_test.go Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>	3 years ago
beorn7	5d4db805ac	Merge branch 'main' into sparsehistogram	3 years ago
Dieter Plaetinck	0fac9bb859	Add basic initial developer docs for TSDB (#9451 ) * Add basic initial developer docs for TSDB There's a decent amount of content already out there (blog posts, conference talks, etc), but: * when they get stale, they don't tend to get updated * they still leave me with questions that I'ld like to answer for developers (like me) who want to use, or work with, TSDB What I propose is developer docs inside the prometheus repository. Easy to find and harness the power of the community to expand it and keep it up to date. * perfect is the enemy of good. Let's have a base and incrementally improve * Markdown docs should be broad but not too deep. Source code comments can complement them, and are the ideal place for implementation details. Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * use example code that works out of the box Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * Apply suggestions from code review Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com> Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * PR feedback Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * more docs Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * PR feedback Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * Apply suggestions from code review Signed-off-by: Dieter Plaetinck <dieter@grafana.com> Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com> * Apply suggestions from code review Signed-off-by: Dieter Plaetinck <dieter@grafana.com> Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com> * feedback Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * Update tsdb/docs/usage.md Signed-off-by: Dieter Plaetinck <dieter@grafana.com> Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com> * final tweaks Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * workaround docs versioning issue Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * Move example code to real executable, testable example. Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * cleanup example test and make sure it always reproduces Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * obtain temp dir in a way that works with older Go versions Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * Fix Ganesh's comments Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com> Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>	3 years ago
beorn7	4c28d9fac7	Move to histogram.Histogram pointers This is to avoid copying the many fields of a histogram.Histogram all the time. This also fixes a bunch of formerly broken tests. Signed-off-by: beorn7 <beorn@grafana.com>	3 years ago
beorn7	c954cd9d1d	Move packages out of deprecated pkg directory This creates a new `model` directory and moves all data-model related packages over there: exemplar labels relabel rulefmt textparse timestamp value All the others are more or less utilities and have been moved to `util`: gate logging modetimevfs pool runtime Signed-off-by: beorn7 <beorn@grafana.com>	3 years ago
Dieter Plaetinck	cda025b5b5	TSDB: demistify SeriesRefs and ChunkRefs (#9536 ) * TSDB: demistify seriesRefs and ChunkRefs The TSDB package contains many types of series and chunk references, all shrouded in uint types. Often the same uint value may actually mean one of different types, in non-obvious ways. This PR aims to clarify the code and help navigating to relevant docs, usage, etc much quicker. Concretely: * Use appropriately named types and document their semantics and relations. * Make multiplexing and demuxing of types explicit (on the boundaries between concrete implementations and generic interfaces). * Casting between different types should be free. None of the changes should have any impact on how the code runs. TODO: Implement BlockSeriesRef where appropriate (for a future PR) Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * feedback Signed-off-by: Dieter Plaetinck <dieter@grafana.com> * agent: demistify seriesRefs and ChunkRefs Signed-off-by: Dieter Plaetinck <dieter@grafana.com>	3 years ago
Marco Pracucci	edd05d7010	Add Head.AppendableMinValidTime() (#9643 ) Signed-off-by: Marco Pracucci <marco@pracucci.com>	3 years ago
Serge Catudal	8c3eca84db	Fix remote write receiver endpoint for exemplars (#9414 ) Signed-off-by: Serge Catudal <serge.catudal@gmail.com>	3 years ago

1 2

66 Commits (291ab4d0bc6ea9f0e61073f303bd3982e9727b8d)