I think we should increment the metric here, we're setting the rule
health anyways. This means even if the "evaluation" suceeded, none of
the samples made it to storage.
This is a simplified solution to: https://github.com/prometheus/prometheus/pull/8410/
Signed-off-by: Goutham Veeramachaneni <gouthamve@gmail.com>
* [rule] Update rule health for append/commit fails
Similar to https://github.com/prometheus/prometheus/pull/8410 will
provide more context.
Signed-off-by: Goutham Veeramachaneni <gouthamve@gmail.com>
* Add test for updating health on append fails
Signed-off-by: Goutham Veeramachaneni <gouthamve@gmail.com>
This moves the label lookup into TSDB, whilst still keeping the cached-ref optimisation for repeated Appends.
This makes the API easier to consume and implement. In particular this change is motivated by the scrape-time-aggregation work, which I don't think is possible to implement without it as it needs access to label values.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
* Label rule_group_iterations metric with group name
evalTotal and evalFailures having the label but iterations not having it
is an odd mismatch.
Signed-off-by: Goutham Veeramachaneni <gouthamve@gmail.com>
* Remove the metrics when a group is deleted.
Signed-off-by: Goutham Veeramachaneni <gouthamve@gmail.com>
* Initialise the metrics
Signed-off-by: Goutham Veeramachaneni <gouthamve@gmail.com>
To load ALERT_FOR_STATE only `storage.Queryable` interface is required,
so this patch uses this narrower interface for to perform this.
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* Add errors and Warnings to SeriesSet
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Change Querier interface and refactor accordingly
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Refactor promql/engine to propagate warnings at eval stage
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Address review issues
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Make sure all the series from all Selects are pre-advanced
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Address review issues
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Separate merge series sets
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Clean
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Refactor merge querier failure handling
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Refactored and simplified fanout with improvements from incoming chunk iterator PRs.
* Secondary logic is hidden, instead of weird failed series set logic we had.
* Fanout is well commented
* Fanout closing record all errors
* MergeQuerier improved API (clearer)
* deferredGenericMergeSeriesSet is not needed as we return no samples anyway for failed series sets (next = false).
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fix formatting
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Fix CI issues
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Added final tests for error handling.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Addressed Brian's comments.
* Moved hints in populate to be allocated only when needed.
* Used sync.Once in secondary Querier to achieve all-or-nothing partial response logic.
* Select after first Next is done will panic.
NOTE: in lazySeriesSet in theory we could just panic, I think however we can
totally just return error, it will panic in expand anyway.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Utilize errWithWarnings
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Fix recently introduced expansion issue
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Add tests for secondary querier error handling
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Implement lazy merge
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Add name to test cases
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Reorganize
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Address review comments
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Address review comments
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Remove redundant warnings
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Fix rebase mistake
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
Rather than sending a value to the done channel on a group to indicate
whether or not to add stale markers to a closing rule group use an
explicit boolean. This allows more functions than just run() to read
from the done channel and fixes an issue where Eval() could consume the
channel during an update, causing run() to never return.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
time.Unix attaches the local timezone, which can then
leak out (e.g. in the alert json). While this is harmless,
we should be consistent.
Signed-off-by: Brian Brazil <brian.brazil@robustperception.io>
This is technically BREAKING CHANGE, but it was like this from the beginning: I just notice that we rely in
Prometheus on remote read being sorted. This is because we use selected data from remote reads in MergeSeriesSet
which rely on sorting.
I found during work on https://github.com/prometheus/prometheus/pull/5882 that
we do so many repetitions because of this, for not good reason. I think
I found a good balance between convenience and readability with just one method.
Smaller the interface = better.
Also I don't know what TestSelectSorted was testing, but now it's testing sorting.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
This fixes#6992, which was introduced by #6777. There was an
intermediate component which translated TSDB errors into storage errors,
but that component was deleted and this bug went unnoticed, until we
were watching at the Prombench results. Without this, scrape will fail
instead of dropping samples or using "Add" when the series have been
garbage collected.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
With defer having less of a performance penalty, there is no reason
not to do those crucial operations via defer.
Context: With isolation in place, if we forget to Commit/Rollback, the
low watermark will get stuck forever.
The current code should not have any bugs, but moving to defer helps
to avoid future bugs.
This is also moving the `closeAppend` in the `Commit` implementation
itself to defer. If logging to the WAL fails, we would have missed the
`closeAppend`.
Signed-off-by: beorn7 <beorn@grafana.com>
This is technically BREAKING CHANGE, but it was like this from the beginning: I just notice that we rely in
Prometheus on remote read being sorted. This is because we use selected data from remote reads in MergeSeriesSet
which rely on sorting.
I found during work on https://github.com/prometheus/prometheus/pull/5882 that
we do so many repetitions because of this, for not good reason. I think
I found a good balance between convenience and readability with just one method.
Smaller the interface = better.
Also I don't know what TestSelectSorted was testing, but now it's testing sorting.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
This is part of https://github.com/prometheus/prometheus/pull/5882 that can be done to simplify things.
All todos I added will be fixed in follow up PRs.
* querier.Querier, querier.Appender, querier.SeriesSet, and querier.Series interfaces merged
with storage interface.go. All imports that.
* querier.SeriesIterator replaced by chunkenc.Iterator
* Added chunkenc.Iterator.Seek method and tests for xor implementation (?)
* Since we properly handle SelectParams for Select methods I adjusted min max
based on that. This should help in terms of performance for queries with functions like offset.
* added Seek to deletedIterator and test.
* storage/tsdb was removed as it was only a unnecessary glue with incompatible structs.
No logic was changed, only different source of abstractions, so no need for benchmarks.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Query Log: add origin of the rules
We don't set rule name and rule kind because the added value would be
quite low, given we have now the file, the group and the query.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
With the next release of client_golang, Summaries will not have
objectives by default. To not lose the objectives we have right now,
explicitly state the current default objectives.
Signed-off-by: beorn7 <beorn@grafana.com>
* Working group name
Signed-off-by: Pritam Bhudia <pritam.bhudia@baesystems.com>
* Working categorised by group name
Signed-off-by: Pritam Bhudia <pritam.bhudia@baesystems.com>
* Changed group sorting in web
Signed-off-by: Pritam Bhudia <pritam.bhudia@baesystems.com>
* Fixed group sorting and comments
Signed-off-by: Pritam Bhudia <pritam.bhudia@baesystems.com>
* Fixed group sorting and comments with gofmt
Signed-off-by: Pritam Bhudia <pritam.bhudia@baesystems.com>
* Added file and group name
Signed-off-by: Pritam Bhudia <pritam.bhudia@baesystems.com>
* reverted back to full path to yml file
Signed-off-by: Pritam Bhudia <pritam.bhudia@baesystems.com>
i) Uses the more idiomatic Wrap and Wrapf methods for creating nested errors.
ii) Fixes some incorrect usages of fmt.Errorf where the error messages don't have any formatting directives.
iii) Does away with the use of fmt package for errors in favour of pkg/errors
Signed-off-by: tariqibrahim <tariq181290@gmail.com>
Levi Harrison