* WIP implement WAL watcher reading via notifications over a channel from
the TSDB code
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Notify via head appenders Commit (finished all WAL logging) rather than
on each WAL Log call
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Fix misspelled Notify plus add a metric for dropped Write notifications
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Update tests to handle new notification pattern
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* this test maybe needs more time on windows?
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* does this test need more time on windows as well?
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* read timeout is already a time.Duration
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* remove mistakenly commited benchmark data files
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* address some review feedback
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* fix missed changes from previous commit
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Fix issues from wrapper function
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* try fixing race condition in test by allowing tests to overwrite the
read ticker timeout instead of calling the Notify function
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* fix linting
Signed-off-by: Callum Styan <callumstyan@gmail.com>
---------
Signed-off-by: Callum Styan <callumstyan@gmail.com>
Wiser coders than myself have come to the conclusion that a `switch`
statement is almost always superior to a statement that includes any
`else if`.
The exceptions that I have found in our codebase are just these two:
* The `if else` is followed by an additional statement before the next
condition (separated by a `;`).
* The whole thing is within a `for` loop and `break` statements are
used. In this case, using `switch` would require tagging the `for`
loop, which probably tips the balance.
Why are `switch` statements more readable?
For one, fewer curly braces. But more importantly, the conditions all
have the same alignment, so the whole thing follows the natural flow
of going down a list of conditions. With `else if`, in contrast, all
conditions but the first are "hidden" behind `} else if `, harder to
spot and (for no good reason) presented differently from the first
condition.
I'm sure the aforemention wise coders can list even more reasons.
In any case, I like it so much that I have found myself recommending
it in code reviews. I would like to make it a habit in our code base,
without making it a hard requirement that we would test on the CI. But
for that, there has to be a role model, so this commit eliminates all
`if else` occurrences, unless it is autogenerated code or fits one of
the exceptions above.
Signed-off-by: beorn7 <beorn@grafana.com>
We haven't updated golint-ci in our CI yet, but this commit prepares
for that.
There are a lot of new warnings, and it is mostly because the "revive"
linter got updated. I agree with most of the new warnings, mostly
around not naming unused function parameters (although it is justified
in some cases for documentation purposes – while things like mocks are
a good example where not naming the parameter is clearer).
I'm pretty upset about the "empty block" warning to include `for`
loops. It's such a common pattern to do something in the head of the
`for` loop and then have an empty block. There is still an open issue
about this: https://github.com/mgechev/revive/issues/810 I have
disabled "revive" altogether in files where empty blocks are used
excessively, and I have made the effort to add individual
`// nolint:revive` where empty blocks are used just once or twice.
It's borderline noisy, though, but let's go with it for now.
I should mention that none of the "empty block" warnings for `for`
loop bodies were legitimate.
Signed-off-by: beorn7 <beorn@grafana.com>
In other words: Instead of having a “polymorphous” `Point` that can
either contain a float value or a histogram value, use an `FPoint` for
floats and an `HPoint` for histograms.
This seemingly small change has a _lot_ of repercussions throughout
the codebase.
The idea here is to avoid the increase in size of `Point` arrays that
happened after native histograms had been added.
The higher-level data structures (`Sample`, `Series`, etc.) are still
“polymorphous”. The same idea could be applied to them, but at each
step the trade-offs needed to be evaluated.
The idea with this change is to do the minimum necessary to get back
to pre-histogram performance for functions that do not touch
histograms. Here are comparisons for the `changes` function. The test
data doesn't include histograms yet. Ideally, there would be no change
in the benchmark result at all.
First runtime v2.39 compared to directly prior to this commit:
```
name old time/op new time/op delta
RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8)
RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10)
RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9)
RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10)
```
And then runtime v2.39 compared to after this commit:
```
name old time/op new time/op delta
RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8)
RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8)
RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10)
RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9)
RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9)
```
In summary, the runtime doesn't really improve with this change for
queries with just a few steps. For queries with many steps, this
commit essentially reinstates the old performance. This is good
because the many-step queries are the one that matter most (longest
absolute runtime).
In terms of allocations, though, this commit doesn't make a dent at
all (numbers not shown). The reason is that most of the allocations
happen in the sampleRingIterator (in the storage package), which has
to be addressed in a separate commit.
Signed-off-by: beorn7 <beorn@grafana.com>
This makes it more consistent with other command like import rules. We
don't have stricts rules and uniformity accross promtool unfortunately,
but I think it's better to only have the http config on relevant check
commands to avoid thinking Prometheus can e.g. check the config over the
wire.
Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>
There are a few tests that will run prometheus command.
This can test if there's already something listening on port :9090 since --web.listen-address defaults to 0.0.0.0:9090.
To fix that we can tell prometheus to use a random port on loopback interface.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
It took a `Labels` where the memory could be re-used, but in practice
this hardly ever benefitted. Especially after converting `relabel.Process`
to `relabel.ProcessBuilder`.
Comparing the parameter to `nil` was a bug; `EmptyLabels` is not `nil`
so the slice was reallocated multiple times by `append`.
Lastly `Builder.Labels()` now estimates that the final size will depend
on labels added and deleted.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Common service discovery mechanisms such as Kubernetes can generate a
lot of target groups, so this function was allocating a lot of memory
which then immediately became garbage. Re-using the structures across
an entire Sync saves effort.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Save work converting to `Labels` then to `Builder`.
`PopulateLabels()` now takes as Builder as input.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Dumping without any limit on the data being dumped will generate
a large amount of data. Also, sometimes it is necessary to dump
only a part of the data in order to change or transfer it.
This change allows to specify a part of the data to dump and
by default works same as before. (no public API change)
Signed-off-by: Amin Borjian <borjianamin98@outlook.com>
Extends Appender.AppendHistogram function to accept the FloatHistogram. TSDB supports appending, querying, WAL replay, for this new type of histogram.
Signed-off-by: Marc Tudurí <marctc@protonmail.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Instead of passing in a `ScratchBuilder` and `Labels`, just pass the
builder and the caller can extract labels from it. In many cases the
caller didn't use the Labels value anyway.
Now in `Labels.ScratchBuilder` we need a slightly different API: one
to assign what will be the result, instead of overwriting some other
`Labels`. This is safer and easier to reason about.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
This necessitates a change to the `tsdb.IndexReader` interface:
`index.Reader` is used from multiple goroutines concurrently, so we
can't have state in it.
We do retain a `ScratchBuilder` in `blockBaseSeriesSet` which is
iterator-like.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Patterned after `Chunk.Iterator()`: pass the old iterator in so it
can be re-used to avoid allocating a new object.
(This commit does not do any re-use; it is just changing all the method
signatures so re-use is possible in later commits.)
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Introduce out-of-order TSDB support
This implementation is based on this design doc:
https://docs.google.com/document/d/1Kppm7qL9C-BJB1j6yb6-9ObG3AbdZnFUBYPNNWwDBYM/edit?usp=sharing
This commit adds support to accept out-of-order ("OOO") sample into the TSDB
up to a configurable time allowance. If OOO is enabled, overlapping querying
are automatically enabled.
Most of the additions have been borrowed from
https://github.com/grafana/mimir-prometheus/
Here is the list ist of the original commits cherry picked
from mimir-prometheus into this branch:
- 4b2198d7ec
- 2836e5513f
- 00b379c3a5
- ff0dc75758
- a632c73352
- c6f3d4ab33
- 5e8406a1d4
- abde1e0ba1
- e70e769889
- df59320886
Co-authored-by: Jesus Vazquez <jesus.vazquez@grafana.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Dieter Plaetinck <dieter@grafana.com>
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* gofumpt files
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Add license header to missing files
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix OOO tests due to existing chunk disk mapper implementation
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix truncate int overflow
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Add Sync method to the WAL and update tests
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* remove useless sync
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Update minOOOTime after truncating Head
* Update minOOOTime after truncating Head
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix lint
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Add a unit test
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Load OutOfOrderTimeWindow only once per appender
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix OOO Head LabelValues and PostingsForMatchers
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix replay of OOO mmap chunks
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Remove unnecessary err check
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Prevent panic with ApplyConfig
Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Run OOO compaction after restart if there is OOO data from WBL
Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Apply Bartek's suggestions
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Refactor OOO compaction
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Address comments and TODOs
- Added a comment explaining why we need the allow overlapping
compaction toggle
- Clarified TSDBConfig OutOfOrderTimeWindow doc
- Added an owner to all the TODOs in the code
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Run go format
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix remaining review comments
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix tests
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Change wbl reference when truncating ooo in TestHeadMinOOOTimeUpdate
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix TestWBLAndMmapReplay test failure on windows
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Address most of the feedback
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Refactor the block meta for out of order
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix windows error
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix review comments
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Dieter Plaetinck <dieter@grafana.com>
Co-authored-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Add runtime config to control native histogram ingestion
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Make the config into a CLI flag
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Bryan Boreham