In other words: Instead of having a “polymorphous” `Point` that can
either contain a float value or a histogram value, use an `FPoint` for
floats and an `HPoint` for histograms.
This seemingly small change has a _lot_ of repercussions throughout
the codebase.
The idea here is to avoid the increase in size of `Point` arrays that
happened after native histograms had been added.
The higher-level data structures (`Sample`, `Series`, etc.) are still
“polymorphous”. The same idea could be applied to them, but at each
step the trade-offs needed to be evaluated.
The idea with this change is to do the minimum necessary to get back
to pre-histogram performance for functions that do not touch
histograms. Here are comparisons for the `changes` function. The test
data doesn't include histograms yet. Ideally, there would be no change
in the benchmark result at all.
First runtime v2.39 compared to directly prior to this commit:
```
name old time/op new time/op delta
RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8)
RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10)
RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9)
RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10)
```
And then runtime v2.39 compared to after this commit:
```
name old time/op new time/op delta
RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8)
RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8)
RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10)
RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9)
RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9)
```
In summary, the runtime doesn't really improve with this change for
queries with just a few steps. For queries with many steps, this
commit essentially reinstates the old performance. This is good
because the many-step queries are the one that matter most (longest
absolute runtime).
In terms of allocations, though, this commit doesn't make a dent at
all (numbers not shown). The reason is that most of the allocations
happen in the sampleRingIterator (in the storage package), which has
to be addressed in a separate commit.
Signed-off-by: beorn7 <beorn@grafana.com>
It took a `Labels` where the memory could be re-used, but in practice
this hardly ever benefitted. Especially after converting `relabel.Process`
to `relabel.ProcessBuilder`.
Comparing the parameter to `nil` was a bug; `EmptyLabels` is not `nil`
so the slice was reallocated multiple times by `append`.
Lastly `Builder.Labels()` now estimates that the final size will depend
on labels added and deleted.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
This commit adds a new 'keep_firing_for' field to Prometheus alerting
rules. The 'resolve_delay' field specifies the minimum amount of time
that an alert should remain firing, even if the expression does not
return any results.
This feature was discussed at a previous dev summit, and it was
determined that a feature like this would be useful in order to allow
the expression time to stabilize and prevent confusing resolved messages
from being propagated through Alertmanager.
This approach is simpler than having two PromQL queries, as was
sometimes discussed, and it should be easy to implement.
This commit does not include tests for the 'resolve_delay' field. This
is intentional, as the purpose of this commit is to gather comments on
the proposed design of the 'resolve_delay' field before implementing
tests. Once the design of the 'resolve_delay' field has been finalized,
a follow-up commit will be submitted with tests."
See https://github.com/prometheus/prometheus/issues/11570
Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>
This will allow correlation of executed rule queries with their associated rule names and type
Signed-off-by: Danny Kopping <danny.kopping@grafana.com>
* model/relabel: Add benchmark
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* model/relabel: re-use Builder across relabels
Saves memory allocations.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* labels.Builder: allow re-use of result slice
This reduces memory allocations where the caller has a suitable slice available.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* model/relabel: re-use source values slice
To reduce memory allocations.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Unwind one change causing test failures
Restore original behaviour in PopulateLabels, where we must not overwrite the input set.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* relabel: simplify values optimisation
Use a stack-based array for up to 16 source labels, which will be the
vast majority of cases.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* lint
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
This creates a new `model` directory and moves all data-model related
packages over there:
exemplar labels relabel rulefmt textparse timestamp value
All the others are more or less utilities and have been moved to `util`:
gate logging modetimevfs pool runtime
Signed-off-by: beorn7 <beorn@grafana.com>
The function HoldDuration and Duration did the exact same thing.
Let's only keep HoldDuration() as Duration() is more confusing.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
i) Uses the more idiomatic Wrap and Wrapf methods for creating nested errors.
ii) Fixes some incorrect usages of fmt.Errorf where the error messages don't have any formatting directives.
iii) Does away with the use of fmt package for errors in favour of pkg/errors
Signed-off-by: tariqibrahim <tariq181290@gmail.com>
* *: use latest release of staticcheck
It also fixes a couple of things in the code flagged by the additional
checks.
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* Use official release of staticcheck
Also run 'go list' before staticcheck to avoid failures when downloading packages.
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* Add evaluationTimestamp (Last Evaluation) column to display on /rules
Signed-off-by: Will Hegedus <wbhegedus@liberty.edu>
* Add lastScrapeDuration ("Scrape Duration") to display on /targets
Signed-off-by: Will Hegedus <wbhegedus@liberty.edu>
* Updates based on Julius' feedback
Signed-off-by: Will Hegedus <wbhegedus@liberty.edu>
* Update to set timestamp to when eval started (after eval completes)
Signed-off-by: Will Hegedus <wbhegedus@liberty.edu>
* Update /rules to display time since last evaluation
Signed-off-by: Will Hegedus <wbhegedus@liberty.edu>
* Re-order Last Eval/Eval Time to be consistent with targets page
Signed-off-by: Will Hegedus <wbhegedus@liberty.edu>
* adding information about the health and errors for Rules
adding Health() and LastError() to the Rule interface. This will allow
us to easily surface information about rules.
Signed-off-by: noqcks <benny@noqcks.io>
* updating rules.html with fields for Rule errors and health state
Signed-off-by: noqcks <benny@noqcks.io>
* fix code comment grammar & access Rule health/error info using a mutex
Signed-off-by: noqcks <benny@noqcks.io>
* s/Errors/Error/ in rules.html to remain consistent with targets.html
Signed-off-by: noqcks <benny@noqcks.io>
* adding periods to code comments in reporting/alerting
Signed-off-by: noqcks <benny@noqcks.io>
* putting health/error below mutex in struct field
Signed-off-by: noqcks <benny@noqcks.io>
beorn7