Fix unsequential m-map files (#7414)

* Fix unsequential m-map files

Signed-off-by: Ganesh Vernekar <cs15btech11018@iith.ac.in>

* Fix review comments

Signed-off-by: Ganesh Vernekar <cs15btech11018@iith.ac.in>

tsdb/chunks/head_chunks.go

@@ -670,8 +670,8 @@ func (cdm *ChunkDiskMapper) Truncate(mint int64) error {
 
 	var removedFiles []int
 	for _, seq := range chkFileIndices {
-		if seq == cdm.curFileSequence {
-			continue
+		if seq == cdm.curFileSequence || cdm.mmappedChunkFiles[seq].maxt >= mint {
+			break
 		}
 		if cdm.mmappedChunkFiles[seq].maxt < mint {
 			removedFiles = append(removedFiles, seq)
@@ -680,7 +680,10 @@ func (cdm *ChunkDiskMapper) Truncate(mint int64) error {
 	cdm.readPathMtx.RUnlock()
 
 	var merr tsdb_errors.MultiError
-	merr.Add(cdm.CutNewFile())
+	// Cut a new file only if the current file has some chunks.
+	if cdm.curFileNumBytes > HeadChunkFileHeaderSize {
+		merr.Add(cdm.CutNewFile())
+	}
 	merr.Add(cdm.deleteFiles(removedFiles))
 	return merr.Err()
 }

tsdb/chunks/head_chunks_test.go

@@ -156,6 +156,11 @@ func TestHeadReadWriter_WriteChunk_Chunk_IterateChunks(t *testing.T) {
 
 }
 
+// TestHeadReadWriter_Truncate tests
+// * If truncation is happening properly based on the time passed.
+// * The active file is not deleted even if the passed time makes it eligible to be deleted.
+// * Empty current file does not lead to creation of another file after truncation.
+// * Non-empty current file leads to creation of another file after truncation.
 func TestHeadReadWriter_Truncate(t *testing.T) {
 	hrw, close := testHeadReadWriter(t)
 	defer func() {
@@ -163,10 +168,6 @@ func TestHeadReadWriter_Truncate(t *testing.T) {
 		close()
 	}()
 
-	testutil.Assert(t, !hrw.fileMaxtSet, "")
-	testutil.Ok(t, hrw.IterateAllChunks(func(_, _ uint64, _, _ int64, _ uint16) error { return nil }))
-	testutil.Assert(t, hrw.fileMaxtSet, "")
-
 	timeRange := 0
 	fileTimeStep := 100
 	totalFiles := 7
@@ -204,15 +205,15 @@ func TestHeadReadWriter_Truncate(t *testing.T) {
 		cutFile(i)
 	}
 
-	// Verifying the the remaining files.
-	verifyRemainingFiles := func(remainingFiles, startIndex int) {
-		//t.Helper()
+	// Verifying the files.
+	verifyFiles := func(remainingFiles, startIndex int) {
+		t.Helper()
 
 		files, err := ioutil.ReadDir(hrw.dir.Name())
 		testutil.Ok(t, err)
-		testutil.Equals(t, remainingFiles, len(files))
-		testutil.Equals(t, remainingFiles, len(hrw.mmappedChunkFiles))
-		testutil.Equals(t, remainingFiles, len(hrw.closers))
+		testutil.Equals(t, remainingFiles, len(files), "files on disk")
+		testutil.Equals(t, remainingFiles, len(hrw.mmappedChunkFiles), "hrw.mmappedChunkFiles")
+		testutil.Equals(t, remainingFiles, len(hrw.closers), "closers")
 
 		for i := 1; i <= totalFiles; i++ {
 			_, ok := hrw.mmappedChunkFiles[i]
@@ -225,12 +226,12 @@ func TestHeadReadWriter_Truncate(t *testing.T) {
 	}
 
 	// Verify the number of segments.
-	verifyRemainingFiles(totalFiles, 1)
+	verifyFiles(totalFiles, 1)
 
 	// Truncating files.
 	testutil.Ok(t, hrw.Truncate(timeToTruncate))
-	totalFiles++ // Truncation creates a new file.
-	verifyRemainingFiles(totalFiles-filesDeletedAfter1stTruncation, startIndexAfter1stTruncation)
+	totalFiles++ // Truncation creates a new file as the last file is not empty.
+	verifyFiles(totalFiles-filesDeletedAfter1stTruncation, startIndexAfter1stTruncation)
 	addChunk() // Add a chunk so that new file is not truncated.
 
 	dir := hrw.dir.Name()
@@ -245,14 +246,95 @@ func TestHeadReadWriter_Truncate(t *testing.T) {
 	testutil.Ok(t, hrw.IterateAllChunks(func(_, _ uint64, _, _ int64, _ uint16) error { return nil }))
 	testutil.Assert(t, hrw.fileMaxtSet, "")
 
-	// Truncating files after restart.
+	// Truncating files after restart. As the last file was empty, this creates no new files.
 	testutil.Ok(t, hrw.Truncate(timeToTruncateAfterRestart))
-	totalFiles++ // Truncation creates a new file.
-	verifyRemainingFiles(totalFiles-filesDeletedAfter2ndTruncation, startIndexAfter2ndTruncation)
+	verifyFiles(totalFiles-filesDeletedAfter2ndTruncation, startIndexAfter2ndTruncation)
+
+	// First chunk after restart creates a new file.
+	addChunk()
+	totalFiles++
 
 	// Truncating till current time should not delete the current active file.
 	testutil.Ok(t, hrw.Truncate(int64(timeRange+fileTimeStep)))
-	verifyRemainingFiles(2, totalFiles) // One file was the active file and one was newly created.
+	verifyFiles(2, totalFiles) // One file is the active file and one was newly created.
+}
+
+// TestHeadReadWriter_Truncate_NoUnsequentialFiles tests
+// that truncation leaves no unsequential files on disk, mainly under the following case
+// * There is an empty file in between the sequence while the truncation
+//   deletes files only upto a sequence before that (i.e. stops deleting
+//   after it has found a file that is not deletable).
+// This tests https://github.com/prometheus/prometheus/issues/7412 where
+// the truncation used to check all the files for deletion and end up
+// deleting empty files in between and breaking the sequence.
+func TestHeadReadWriter_Truncate_NoUnsequentialFiles(t *testing.T) {
+	hrw, close := testHeadReadWriter(t)
+	defer func() {
+		testutil.Ok(t, hrw.Close())
+		close()
+	}()
+
+	timeRange := 0
+	addChunk := func() {
+		step := 100
+		mint, maxt := timeRange+1, timeRange+step-1
+		_, err := hrw.WriteChunk(1, int64(mint), int64(maxt), randomChunk(t))
+		testutil.Ok(t, err)
+		timeRange += step
+	}
+	emptyFile := func() {
+		testutil.Ok(t, hrw.CutNewFile())
+	}
+	nonEmptyFile := func() {
+		emptyFile()
+		addChunk()
+	}
+
+	addChunk()     // 1. Created with the first chunk.
+	nonEmptyFile() // 2.
+	nonEmptyFile() // 3.
+	emptyFile()    // 4.
+	nonEmptyFile() // 5.
+	emptyFile()    // 6.
+
+	// Verifying the files.
+	verifyFiles := func(remainingFiles []int) {
+		t.Helper()
+
+		files, err := ioutil.ReadDir(hrw.dir.Name())
+		testutil.Ok(t, err)
+		testutil.Equals(t, len(remainingFiles), len(files), "files on disk")
+		testutil.Equals(t, len(remainingFiles), len(hrw.mmappedChunkFiles), "hrw.mmappedChunkFiles")
+		testutil.Equals(t, len(remainingFiles), len(hrw.closers), "closers")
+
+		for _, i := range remainingFiles {
+			_, ok := hrw.mmappedChunkFiles[i]
+			testutil.Equals(t, true, ok)
+		}
+	}
+
+	verifyFiles([]int{1, 2, 3, 4, 5, 6})
+
+	// Truncating files till 2. It should not delete anything after 3 (inclusive)
+	// though files 4 and 6 are empty.
+	file2Maxt := hrw.mmappedChunkFiles[2].maxt
+	testutil.Ok(t, hrw.Truncate(file2Maxt+1))
+	// As 6 was empty, it should not create another file.
+	verifyFiles([]int{3, 4, 5, 6})
+
+	addChunk()
+	// Truncate creates another file as 6 is not empty now.
+	testutil.Ok(t, hrw.Truncate(file2Maxt+1))
+	verifyFiles([]int{3, 4, 5, 6, 7})
+
+	dir := hrw.dir.Name()
+	testutil.Ok(t, hrw.Close())
+
+	// Restarting checks for unsequential files.
+	var err error
+	hrw, err = NewChunkDiskMapper(dir, chunkenc.NewPool())
+	testutil.Ok(t, err)
+	verifyFiles([]int{3, 4, 5, 6, 7})
 }
 
 func testHeadReadWriter(t *testing.T) (hrw *ChunkDiskMapper, close func()) {
@@ -260,6 +342,9 @@ func testHeadReadWriter(t *testing.T) (hrw *ChunkDiskMapper, close func()) {
 	testutil.Ok(t, err)
 	hrw, err = NewChunkDiskMapper(tmpdir, chunkenc.NewPool())
 	testutil.Ok(t, err)
+	testutil.Assert(t, !hrw.fileMaxtSet, "")
+	testutil.Ok(t, hrw.IterateAllChunks(func(_, _ uint64, _, _ int64, _ uint16) error { return nil }))
+	testutil.Assert(t, hrw.fileMaxtSet, "")
 	return hrw, func() {
 		testutil.Ok(t, os.RemoveAll(tmpdir))
 	}