You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
prometheus/promql/testdata/histograms.test

236 lines
9.2 KiB

# Two histograms with 4 buckets each (x_sum and x_count not included,
# only buckets). Lowest bucket for one histogram < 0, for the other >
# 0. They have the same name, just separated by label. Not useful in
# practice, but can happen (if clients change bucketing), and the
# server has to cope with it.
# Test histogram.
load 5m
testhistogram_bucket{le="0.1", start="positive"} 0+5x10
testhistogram_bucket{le=".2", start="positive"} 0+7x10
testhistogram_bucket{le="1e0", start="positive"} 0+11x10
testhistogram_bucket{le="+Inf", start="positive"} 0+12x10
testhistogram_bucket{le="-.2", start="negative"} 0+1x10
testhistogram_bucket{le="-0.1", start="negative"} 0+2x10
testhistogram_bucket{le="0.3", start="negative"} 0+2x10
testhistogram_bucket{le="+Inf", start="negative"} 0+3x10
# Another test histogram, where q(1/6), q(1/2), and q(5/6) are each in
# the middle of a bucket and should therefore be 1, 3, and 5,
# respectively.
load 5m
testhistogram2_bucket{le="0"} 0+0x10
testhistogram2_bucket{le="2"} 0+1x10
testhistogram2_bucket{le="4"} 0+2x10
testhistogram2_bucket{le="6"} 0+3x10
testhistogram2_bucket{le="+Inf"} 0+3x10
# Now a more realistic histogram per job and instance to test aggregation.
load 5m
request_duration_seconds_bucket{job="job1", instance="ins1", le="0.1"} 0+1x10
request_duration_seconds_bucket{job="job1", instance="ins1", le="0.2"} 0+3x10
request_duration_seconds_bucket{job="job1", instance="ins1", le="+Inf"} 0+4x10
request_duration_seconds_bucket{job="job1", instance="ins2", le="0.1"} 0+2x10
request_duration_seconds_bucket{job="job1", instance="ins2", le="0.2"} 0+5x10
request_duration_seconds_bucket{job="job1", instance="ins2", le="+Inf"} 0+6x10
request_duration_seconds_bucket{job="job2", instance="ins1", le="0.1"} 0+3x10
request_duration_seconds_bucket{job="job2", instance="ins1", le="0.2"} 0+4x10
request_duration_seconds_bucket{job="job2", instance="ins1", le="+Inf"} 0+6x10
request_duration_seconds_bucket{job="job2", instance="ins2", le="0.1"} 0+4x10
request_duration_seconds_bucket{job="job2", instance="ins2", le="0.2"} 0+7x10
request_duration_seconds_bucket{job="job2", instance="ins2", le="+Inf"} 0+9x10
# Different le representations in one histogram.
load 5m
mixed_bucket{job="job1", instance="ins1", le="0.1"} 0+1x10
mixed_bucket{job="job1", instance="ins1", le="0.2"} 0+1x10
mixed_bucket{job="job1", instance="ins1", le="2e-1"} 0+1x10
mixed_bucket{job="job1", instance="ins1", le="2.0e-1"} 0+1x10
mixed_bucket{job="job1", instance="ins1", le="+Inf"} 0+4x10
mixed_bucket{job="job1", instance="ins2", le="+inf"} 0+0x10
mixed_bucket{job="job1", instance="ins2", le="+Inf"} 0+0x10
# Quantile too low.
eval instant at 50m histogram_quantile(-0.1, testhistogram_bucket)
{start="positive"} -Inf
{start="negative"} -Inf
# Quantile too high.
eval instant at 50m histogram_quantile(1.01, testhistogram_bucket)
{start="positive"} +Inf
{start="negative"} +Inf
# Quantile invalid.
eval instant at 50m histogram_quantile(NaN, testhistogram_bucket)
{start="positive"} NaN
{start="negative"} NaN
# Quantile value in lowest bucket, which is positive.
eval instant at 50m histogram_quantile(0, testhistogram_bucket{start="positive"})
{start="positive"} 0
# Quantile value in lowest bucket, which is negative.
eval instant at 50m histogram_quantile(0, testhistogram_bucket{start="negative"})
{start="negative"} -0.2
# Quantile value in highest bucket.
eval instant at 50m histogram_quantile(1, testhistogram_bucket)
{start="positive"} 1
{start="negative"} 0.3
# Finally some useful quantiles.
eval instant at 50m histogram_quantile(0.2, testhistogram_bucket)
{start="positive"} 0.048
{start="negative"} -0.2
eval instant at 50m histogram_quantile(0.5, testhistogram_bucket)
{start="positive"} 0.15
{start="negative"} -0.15
eval instant at 50m histogram_quantile(0.8, testhistogram_bucket)
{start="positive"} 0.72
{start="negative"} 0.3
# More realistic with rates.
eval instant at 50m histogram_quantile(0.2, rate(testhistogram_bucket[5m]))
{start="positive"} 0.048
{start="negative"} -0.2
eval instant at 50m histogram_quantile(0.5, rate(testhistogram_bucket[5m]))
{start="positive"} 0.15
{start="negative"} -0.15
eval instant at 50m histogram_quantile(0.8, rate(testhistogram_bucket[5m]))
{start="positive"} 0.72
{start="negative"} 0.3
# Want results exactly in the middle of the bucket.
eval instant at 7m histogram_quantile(1./6., testhistogram2_bucket)
{} 1
eval instant at 7m histogram_quantile(0.5, testhistogram2_bucket)
{} 3
eval instant at 7m histogram_quantile(5./6., testhistogram2_bucket)
{} 5
eval instant at 47m histogram_quantile(1./6., rate(testhistogram2_bucket[15m]))
{} 1
eval instant at 47m histogram_quantile(0.5, rate(testhistogram2_bucket[15m]))
{} 3
eval instant at 47m histogram_quantile(5./6., rate(testhistogram2_bucket[15m]))
{} 5
# Aggregated histogram: Everything in one.
eval instant at 50m histogram_quantile(0.3, sum(rate(request_duration_seconds_bucket[5m])) by (le))
{} 0.075
eval instant at 50m histogram_quantile(0.5, sum(rate(request_duration_seconds_bucket[5m])) by (le))
{} 0.1277777777777778
# Aggregated histogram: Everything in one. Now with avg, which does not change anything.
eval instant at 50m histogram_quantile(0.3, avg(rate(request_duration_seconds_bucket[5m])) by (le))
{} 0.075
eval instant at 50m histogram_quantile(0.5, avg(rate(request_duration_seconds_bucket[5m])) by (le))
{} 0.12777777777777778
# Aggregated histogram: By instance.
eval instant at 50m histogram_quantile(0.3, sum(rate(request_duration_seconds_bucket[5m])) by (le, instance))
{instance="ins1"} 0.075
{instance="ins2"} 0.075
eval instant at 50m histogram_quantile(0.5, sum(rate(request_duration_seconds_bucket[5m])) by (le, instance))
{instance="ins1"} 0.1333333333
{instance="ins2"} 0.125
# Aggregated histogram: By job.
eval instant at 50m histogram_quantile(0.3, sum(rate(request_duration_seconds_bucket[5m])) by (le, job))
{job="job1"} 0.1
{job="job2"} 0.0642857142857143
eval instant at 50m histogram_quantile(0.5, sum(rate(request_duration_seconds_bucket[5m])) by (le, job))
{job="job1"} 0.14
{job="job2"} 0.1125
# Aggregated histogram: By job and instance.
eval instant at 50m histogram_quantile(0.3, sum(rate(request_duration_seconds_bucket[5m])) by (le, job, instance))
{instance="ins1", job="job1"} 0.11
{instance="ins2", job="job1"} 0.09
{instance="ins1", job="job2"} 0.06
{instance="ins2", job="job2"} 0.0675
eval instant at 50m histogram_quantile(0.5, sum(rate(request_duration_seconds_bucket[5m])) by (le, job, instance))
{instance="ins1", job="job1"} 0.15
{instance="ins2", job="job1"} 0.1333333333333333
{instance="ins1", job="job2"} 0.1
{instance="ins2", job="job2"} 0.1166666666666667
# The unaggregated histogram for comparison. Same result as the previous one.
eval instant at 50m histogram_quantile(0.3, rate(request_duration_seconds_bucket[5m]))
{instance="ins1", job="job1"} 0.11
{instance="ins2", job="job1"} 0.09
{instance="ins1", job="job2"} 0.06
{instance="ins2", job="job2"} 0.0675
eval instant at 50m histogram_quantile(0.5, rate(request_duration_seconds_bucket[5m]))
{instance="ins1", job="job1"} 0.15
{instance="ins2", job="job1"} 0.13333333333333333
{instance="ins1", job="job2"} 0.1
{instance="ins2", job="job2"} 0.11666666666666667
Force buckets in a histogram to be monotonic for quantile estimation (#2610) * Force buckets in a histogram to be monotonic for quantile estimation The assumption that bucket counts increase monotonically with increasing upperBound may be violated during: * Recording rule evaluation of histogram_quantile, especially when rate() has been applied to the underlying bucket timeseries. * Evaluation of histogram_quantile computed over federated bucket timeseries, especially when rate() has been applied This is because scraped data is not made available to RR evalution or federation atomically, so some buckets are computed with data from the N most recent scrapes, but the other buckets are missing the most recent observations. Monotonicity is usually guaranteed because if a bucket with upper bound u1 has count c1, then any bucket with a higher upper bound u > u1 must have counted all c1 observations and perhaps more, so that c >= c1. Randomly interspersed partial sampling breaks that guarantee, and rate() exacerbates it. Specifically, suppose bucket le=1000 has a count of 10 from 4 samples but the bucket with le=2000 has a count of 7, from 3 samples. The monotonicity is broken. It is exacerbated by rate() because under normal operation, cumulative counting of buckets will cause the bucket counts to diverge such that small differences from missing samples are not a problem. rate() removes this divergence.) bucketQuantile depends on that monotonicity to do a binary search for the bucket with the qth percentile count, so breaking the monotonicity guarantee causes bucketQuantile() to return undefined (nonsense) results. As a somewhat hacky solution until the Prometheus project is ready to accept the changes required to make scrapes atomic, we calculate the "envelope" of the histogram buckets, essentially removing any decreases in the count between successive buckets. * Fix up comment docs for ensureMonotonic * ensureMonotonic: Use switch statement Use switch statement rather than if/else for better readability. Process the most frequent cases first.
8 years ago
# A histogram with nonmonotonic bucket counts. This may happen when recording
# rule evaluation or federation races scrape ingestion, causing some buckets
# counts to be derived from fewer samples.
Force buckets in a histogram to be monotonic for quantile estimation (#2610) * Force buckets in a histogram to be monotonic for quantile estimation The assumption that bucket counts increase monotonically with increasing upperBound may be violated during: * Recording rule evaluation of histogram_quantile, especially when rate() has been applied to the underlying bucket timeseries. * Evaluation of histogram_quantile computed over federated bucket timeseries, especially when rate() has been applied This is because scraped data is not made available to RR evalution or federation atomically, so some buckets are computed with data from the N most recent scrapes, but the other buckets are missing the most recent observations. Monotonicity is usually guaranteed because if a bucket with upper bound u1 has count c1, then any bucket with a higher upper bound u > u1 must have counted all c1 observations and perhaps more, so that c >= c1. Randomly interspersed partial sampling breaks that guarantee, and rate() exacerbates it. Specifically, suppose bucket le=1000 has a count of 10 from 4 samples but the bucket with le=2000 has a count of 7, from 3 samples. The monotonicity is broken. It is exacerbated by rate() because under normal operation, cumulative counting of buckets will cause the bucket counts to diverge such that small differences from missing samples are not a problem. rate() removes this divergence.) bucketQuantile depends on that monotonicity to do a binary search for the bucket with the qth percentile count, so breaking the monotonicity guarantee causes bucketQuantile() to return undefined (nonsense) results. As a somewhat hacky solution until the Prometheus project is ready to accept the changes required to make scrapes atomic, we calculate the "envelope" of the histogram buckets, essentially removing any decreases in the count between successive buckets. * Fix up comment docs for ensureMonotonic * ensureMonotonic: Use switch statement Use switch statement rather than if/else for better readability. Process the most frequent cases first.
8 years ago
load 5m
nonmonotonic_bucket{le="0.1"} 0+2x10
nonmonotonic_bucket{le="1"} 0+1x10
nonmonotonic_bucket{le="10"} 0+5x10
nonmonotonic_bucket{le="100"} 0+4x10
Force buckets in a histogram to be monotonic for quantile estimation (#2610) * Force buckets in a histogram to be monotonic for quantile estimation The assumption that bucket counts increase monotonically with increasing upperBound may be violated during: * Recording rule evaluation of histogram_quantile, especially when rate() has been applied to the underlying bucket timeseries. * Evaluation of histogram_quantile computed over federated bucket timeseries, especially when rate() has been applied This is because scraped data is not made available to RR evalution or federation atomically, so some buckets are computed with data from the N most recent scrapes, but the other buckets are missing the most recent observations. Monotonicity is usually guaranteed because if a bucket with upper bound u1 has count c1, then any bucket with a higher upper bound u > u1 must have counted all c1 observations and perhaps more, so that c >= c1. Randomly interspersed partial sampling breaks that guarantee, and rate() exacerbates it. Specifically, suppose bucket le=1000 has a count of 10 from 4 samples but the bucket with le=2000 has a count of 7, from 3 samples. The monotonicity is broken. It is exacerbated by rate() because under normal operation, cumulative counting of buckets will cause the bucket counts to diverge such that small differences from missing samples are not a problem. rate() removes this divergence.) bucketQuantile depends on that monotonicity to do a binary search for the bucket with the qth percentile count, so breaking the monotonicity guarantee causes bucketQuantile() to return undefined (nonsense) results. As a somewhat hacky solution until the Prometheus project is ready to accept the changes required to make scrapes atomic, we calculate the "envelope" of the histogram buckets, essentially removing any decreases in the count between successive buckets. * Fix up comment docs for ensureMonotonic * ensureMonotonic: Use switch statement Use switch statement rather than if/else for better readability. Process the most frequent cases first.
8 years ago
nonmonotonic_bucket{le="1000"} 0+9x10
nonmonotonic_bucket{le="+Inf"} 0+8x10
Force buckets in a histogram to be monotonic for quantile estimation (#2610) * Force buckets in a histogram to be monotonic for quantile estimation The assumption that bucket counts increase monotonically with increasing upperBound may be violated during: * Recording rule evaluation of histogram_quantile, especially when rate() has been applied to the underlying bucket timeseries. * Evaluation of histogram_quantile computed over federated bucket timeseries, especially when rate() has been applied This is because scraped data is not made available to RR evalution or federation atomically, so some buckets are computed with data from the N most recent scrapes, but the other buckets are missing the most recent observations. Monotonicity is usually guaranteed because if a bucket with upper bound u1 has count c1, then any bucket with a higher upper bound u > u1 must have counted all c1 observations and perhaps more, so that c >= c1. Randomly interspersed partial sampling breaks that guarantee, and rate() exacerbates it. Specifically, suppose bucket le=1000 has a count of 10 from 4 samples but the bucket with le=2000 has a count of 7, from 3 samples. The monotonicity is broken. It is exacerbated by rate() because under normal operation, cumulative counting of buckets will cause the bucket counts to diverge such that small differences from missing samples are not a problem. rate() removes this divergence.) bucketQuantile depends on that monotonicity to do a binary search for the bucket with the qth percentile count, so breaking the monotonicity guarantee causes bucketQuantile() to return undefined (nonsense) results. As a somewhat hacky solution until the Prometheus project is ready to accept the changes required to make scrapes atomic, we calculate the "envelope" of the histogram buckets, essentially removing any decreases in the count between successive buckets. * Fix up comment docs for ensureMonotonic * ensureMonotonic: Use switch statement Use switch statement rather than if/else for better readability. Process the most frequent cases first.
8 years ago
# Nonmonotonic buckets
eval instant at 50m histogram_quantile(0.01, nonmonotonic_bucket)
{} 0.0045
eval instant at 50m histogram_quantile(0.5, nonmonotonic_bucket)
{} 8.5
Force buckets in a histogram to be monotonic for quantile estimation (#2610) * Force buckets in a histogram to be monotonic for quantile estimation The assumption that bucket counts increase monotonically with increasing upperBound may be violated during: * Recording rule evaluation of histogram_quantile, especially when rate() has been applied to the underlying bucket timeseries. * Evaluation of histogram_quantile computed over federated bucket timeseries, especially when rate() has been applied This is because scraped data is not made available to RR evalution or federation atomically, so some buckets are computed with data from the N most recent scrapes, but the other buckets are missing the most recent observations. Monotonicity is usually guaranteed because if a bucket with upper bound u1 has count c1, then any bucket with a higher upper bound u > u1 must have counted all c1 observations and perhaps more, so that c >= c1. Randomly interspersed partial sampling breaks that guarantee, and rate() exacerbates it. Specifically, suppose bucket le=1000 has a count of 10 from 4 samples but the bucket with le=2000 has a count of 7, from 3 samples. The monotonicity is broken. It is exacerbated by rate() because under normal operation, cumulative counting of buckets will cause the bucket counts to diverge such that small differences from missing samples are not a problem. rate() removes this divergence.) bucketQuantile depends on that monotonicity to do a binary search for the bucket with the qth percentile count, so breaking the monotonicity guarantee causes bucketQuantile() to return undefined (nonsense) results. As a somewhat hacky solution until the Prometheus project is ready to accept the changes required to make scrapes atomic, we calculate the "envelope" of the histogram buckets, essentially removing any decreases in the count between successive buckets. * Fix up comment docs for ensureMonotonic * ensureMonotonic: Use switch statement Use switch statement rather than if/else for better readability. Process the most frequent cases first.
8 years ago
eval instant at 50m histogram_quantile(0.99, nonmonotonic_bucket)
{} 979.75
# Buckets with different representations of the same upper bound.
eval instant at 50m histogram_quantile(0.5, rate(mixed_bucket[5m]))
{instance="ins1", job="job1"} 0.15
{instance="ins2", job="job1"} NaN
eval instant at 50m histogram_quantile(0.75, rate(mixed_bucket[5m]))
{instance="ins1", job="job1"} 0.2
{instance="ins2", job="job1"} NaN
eval instant at 50m histogram_quantile(1, rate(mixed_bucket[5m]))
{instance="ins1", job="job1"} 0.2
{instance="ins2", job="job1"} NaN
load 5m
empty_bucket{le="0.1", job="job1", instance="ins1"} 0x10
empty_bucket{le="0.2", job="job1", instance="ins1"} 0x10
empty_bucket{le="+Inf", job="job1", instance="ins1"} 0x10
eval instant at 50m histogram_quantile(0.2, rate(empty_bucket[5m]))
{instance="ins1", job="job1"} NaN
# Load a duplicate histogram with a different name to test failure scenario on multiple histograms with the same label set
# https://github.com/prometheus/prometheus/issues/9910
load 5m
request_duration_seconds2_bucket{job="job1", instance="ins1", le="0.1"} 0+1x10
request_duration_seconds2_bucket{job="job1", instance="ins1", le="0.2"} 0+3x10
request_duration_seconds2_bucket{job="job1", instance="ins1", le="+Inf"} 0+4x10
eval_fail instant at 50m histogram_quantile(0.99, {__name__=~"request_duration.*"})