You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
prometheus/storage/remote/storage.go

199 lines
5.6 KiB

// Copyright 2017 The Prometheus Authors
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package remote
import (
"context"
"sync"
"time"
"github.com/go-kit/kit/log"
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
"github.com/prometheus/client_golang/prometheus"
"github.com/prometheus/common/model"
"github.com/prometheus/prometheus/config"
"github.com/prometheus/prometheus/pkg/labels"
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
"github.com/prometheus/prometheus/pkg/timestamp"
"github.com/prometheus/prometheus/storage"
)
// startTimeCallback is a callback func that return the oldest timestamp stored in a storage.
type startTimeCallback func() (int64, error)
// Storage represents all the remote read and write endpoints. It implements
// storage.Storage.
type Storage struct {
logger log.Logger
mtx sync.RWMutex
// For writes
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
walDir string
queues []*QueueManager
samplesIn *ewmaRate
samplesInMetric prometheus.Counter
highestTimestampMtx sync.Mutex
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
highestTimestamp int64
highestTimestampMetric prometheus.Gauge
// For reads
queryables []storage.Queryable
localStartTimeCallback startTimeCallback
flushDeadline time.Duration
}
// NewStorage returns a remote.Storage.
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
func NewStorage(l log.Logger, reg prometheus.Registerer, stCallback startTimeCallback, walDir string, flushDeadline time.Duration) *Storage {
if l == nil {
l = log.NewNopLogger()
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
shardUpdateDuration := 10 * time.Second
s := &Storage{
logger: l,
localStartTimeCallback: stCallback,
flushDeadline: flushDeadline,
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
walDir: walDir,
// queues: make(map[*QueueManager]struct{}),
samplesIn: newEWMARate(ewmaWeight, shardUpdateDuration),
samplesInMetric: prometheus.NewCounter(prometheus.CounterOpts{
Name: "prometheus_remote_storage_samples_in_total",
Help: "Samples in to remote storage, compare to samples out for queue managers.",
}),
highestTimestampMetric: prometheus.NewGauge(prometheus.GaugeOpts{
Name: "prometheus_remote_storage_highest_timestamp_in",
Help: "Highest timestamp that has come into the remote storage via the Appender interface, in seconds since epoch.",
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
}),
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
reg.MustRegister(s.samplesInMetric)
reg.MustRegister(s.highestTimestampMetric)
return s
}
// ApplyConfig updates the state as the new config requires.
func (s *Storage) ApplyConfig(conf *config.Config) error {
s.mtx.Lock()
defer s.mtx.Unlock()
// Update write queues
newQueues := []*QueueManager{}
// TODO: we should only stop & recreate queues which have changes,
// as this can be quite disruptive.
for i, rwConf := range conf.RemoteWriteConfigs {
c, err := NewClient(i, &ClientConfig{
URL: rwConf.URL,
Timeout: rwConf.RemoteTimeout,
HTTPClientConfig: rwConf.HTTPClientConfig,
})
if err != nil {
return err
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
// Convert to int64 for comparison with timestamps from samples
// we will eventually read from the WAL on startup.
startTime := timestamp.FromTime(time.Now())
newQueues = append(newQueues, NewQueueManager(
s.logger,
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
s.walDir,
s.samplesIn,
&s.highestTimestamp,
rwConf.QueueConfig,
conf.GlobalConfig.ExternalLabels,
rwConf.WriteRelabelConfigs,
c,
s.flushDeadline,
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
startTime,
))
}
for _, q := range s.queues {
q.Stop()
}
s.queues = newQueues
for _, q := range s.queues {
q.Start()
}
// Update read clients
s.queryables = make([]storage.Queryable, 0, len(conf.RemoteReadConfigs))
for i, rrConf := range conf.RemoteReadConfigs {
c, err := NewClient(i, &ClientConfig{
URL: rrConf.URL,
Timeout: rrConf.RemoteTimeout,
HTTPClientConfig: rrConf.HTTPClientConfig,
})
if err != nil {
return err
}
q := QueryableClient(c)
q = ExternalLabelsHandler(q, conf.GlobalConfig.ExternalLabels)
if len(rrConf.RequiredMatchers) > 0 {
q = RequiredMatchersFilter(q, labelsToEqualityMatchers(rrConf.RequiredMatchers))
}
if !rrConf.ReadRecent {
q = PreferLocalStorageFilter(q, s.localStartTimeCallback)
}
s.queryables = append(s.queryables, q)
}
return nil
}
// StartTime implements the Storage interface.
func (s *Storage) StartTime() (int64, error) {
return int64(model.Latest), nil
}
// Querier returns a storage.MergeQuerier combining the remote client queriers
// of each configured remote read endpoint.
func (s *Storage) Querier(ctx context.Context, mint, maxt int64) (storage.Querier, error) {
s.mtx.Lock()
queryables := s.queryables
s.mtx.Unlock()
queriers := make([]storage.Querier, 0, len(queryables))
for _, queryable := range queryables {
q, err := queryable.Querier(ctx, mint, maxt)
if err != nil {
return nil, err
}
queriers = append(queriers, q)
}
return storage.NewMergeQuerier(nil, queriers), nil
}
// Close the background processing of the storage queues.
func (s *Storage) Close() error {
s.mtx.Lock()
defer s.mtx.Unlock()
for _, q := range s.queues {
q.Stop()
}
return nil
}
func labelsToEqualityMatchers(ls model.LabelSet) []*labels.Matcher {
ms := make([]*labels.Matcher, 0, len(ls))
for k, v := range ls {
ms = append(ms, &labels.Matcher{
Type: labels.MatchEqual,
Name: string(k),
Value: string(v),
})
}
return ms
}