You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
prometheus/model/histogram/histogram.go

355 lines
17 KiB

// Copyright 2021 The Prometheus Authors
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package histogram
import (
"math"
)
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
3 years ago
// Histogram encodes a sparse, high-resolution histogram. See the design
// document for full details:
// https://docs.google.com/document/d/1cLNv3aufPZb3fNfaJgdaRBZsInZKKIHo9E6HinJVbpM/edit#
//
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
3 years ago
// The most tricky bit is how bucket indices represent real bucket boundaries.
// An example for schema 0 (by which each bucket is twice as wide as the
// previous bucket):
//
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
3 years ago
// Bucket boundaries → [-2,-1) [-1,-0.5) [-0.5,-0.25) ... [-0.001,0.001] ... (0.25,0.5] (0.5,1] (1,2] ....
// ↑ ↑ ↑ ↑ ↑ ↑ ↑
// Zero bucket (width e.g. 0.001) → | | | ZB | | |
// Positive bucket indices → | | | ... -1 0 1 2 3
// Negative bucket indices → 3 2 1 0 -1 ...
//
// Wich bucket indices are actually used is determined by the spans.
type Histogram struct {
// Currently valid schema numbers are -4 <= n <= 8. They are all for
// base-2 bucket schemas, where 1 is a bucket boundary in each case, and
// then each power of two is divided into 2^n logarithmic buckets. Or
// in other words, each bucket boundary is the previous boundary times
// 2^(2^-n).
Schema int32
// Width of the zero bucket.
ZeroThreshold float64
// Observations falling into the zero bucket.
ZeroCount uint64
// Total number of observations.
Count uint64
// Sum of observations.
Sum float64
// Spans for positive and negative buckets (see Span below).
PositiveSpans, NegativeSpans []Span
// Observation counts in buckets. The first element is an absolute
// count. All following ones are deltas relative to the previous
// element.
PositiveBuckets, NegativeBuckets []int64
}
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
3 years ago
// A Span defines a continuous sequence of buckets.
type Span struct {
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
3 years ago
// Gap to previous span (always positive), or starting index for the 1st
// span (which can be negative).
Offset int32
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
3 years ago
// Length of the span.
Length uint32
}
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
3 years ago
// Copy returns a deep copy of the Histogram.
func (h Histogram) Copy() Histogram {
c := h
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
3 years ago
if h.PositiveSpans != nil {
c.PositiveSpans = make([]Span, len(h.PositiveSpans))
copy(c.PositiveSpans, h.PositiveSpans)
}
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
3 years ago
if h.NegativeSpans != nil {
c.NegativeSpans = make([]Span, len(h.NegativeSpans))
copy(c.NegativeSpans, h.NegativeSpans)
}
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
3 years ago
if h.PositiveBuckets != nil {
c.PositiveBuckets = make([]int64, len(h.PositiveBuckets))
copy(c.PositiveBuckets, h.PositiveBuckets)
}
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
3 years ago
if h.NegativeBuckets != nil {
c.NegativeBuckets = make([]int64, len(h.NegativeBuckets))
copy(c.NegativeBuckets, h.NegativeBuckets)
}
return c
}
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
3 years ago
// CumulativeBucketIterator returns a BucketIterator to iterate over a
// cumulative view of the buckets. This method currently only supports
// Histograms without negative buckets and panics if the Histogram has negative
// buckets. It is currently only used for testing.
func (h Histogram) CumulativeBucketIterator() BucketIterator {
if len(h.NegativeBuckets) > 0 {
panic("CumulativeIterator called on Histogram with negative buckets")
}
return &cumulativeBucketIterator{h: h, posSpansIdx: -1}
}
// BucketIterator iterates over the buckets of a Histogram, returning decoded
// buckets.
type BucketIterator interface {
// Next advances the iterator by one.
Next() bool
// At returns the current bucket.
At() Bucket
// Err returns the current error. It should be used only after iterator is
// exhausted, that is `Next` or `Seek` returns false.
Err() error
}
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
3 years ago
// Bucket represents a bucket (currently only a cumulative one with an upper
// inclusive bound and a cumulative count).
type Bucket struct {
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
3 years ago
Upper float64
Count uint64
}
type cumulativeBucketIterator struct {
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
3 years ago
h Histogram
posSpansIdx int // Index in h.PositiveSpans we are in. -1 means 0 bucket.
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
3 years ago
posBucketsIdx int // Index in h.PositiveBuckets.
idxInSpan uint32 // Index in the current span. 0 <= idxInSpan < span.Length.
initialised bool
currIdx int32 // The actual bucket index after decoding from spans.
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
3 years ago
currUpper float64 // The upper boundary of the current bucket.
currCount int64 // Current non-cumulative count for the current bucket. Does not apply for empty bucket.
currCumulativeCount uint64 // Current "cumulative" count for the current bucket.
// Between 2 spans there could be some empty buckets which
// still needs to be counted for cumulative buckets.
// When we hit the end of a span, we use this to iterate
// through the empty buckets.
emptyBucketCount int32
}
func (c *cumulativeBucketIterator) Next() bool {
if c.posSpansIdx == -1 {
// Zero bucket.
c.posSpansIdx++
if c.h.ZeroCount == 0 {
return c.Next()
}
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
3 years ago
c.currUpper = c.h.ZeroThreshold
c.currCount = int64(c.h.ZeroCount)
c.currCumulativeCount = uint64(c.currCount)
return true
}
if c.posSpansIdx >= len(c.h.PositiveSpans) {
return false
}
if c.emptyBucketCount > 0 {
// We are traversing through empty buckets at the moment.
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
3 years ago
c.currUpper = getUpper(c.currIdx, c.h.Schema)
c.currIdx++
c.emptyBucketCount--
return true
}
span := c.h.PositiveSpans[c.posSpansIdx]
if c.posSpansIdx == 0 && !c.initialised {
// Initialising.
c.currIdx = span.Offset
// The first bucket is absolute value and not a delta with Zero bucket.
c.currCount = 0
c.initialised = true
}
c.currCount += c.h.PositiveBuckets[c.posBucketsIdx]
c.currCumulativeCount += uint64(c.currCount)
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
3 years ago
c.currUpper = getUpper(c.currIdx, c.h.Schema)
c.posBucketsIdx++
c.idxInSpan++
c.currIdx++
if c.idxInSpan >= span.Length {
// Move to the next span. This one is done.
c.posSpansIdx++
c.idxInSpan = 0
if c.posSpansIdx < len(c.h.PositiveSpans) {
c.emptyBucketCount = c.h.PositiveSpans[c.posSpansIdx].Offset
}
}
return true
}
func (c *cumulativeBucketIterator) At() Bucket {
return Bucket{
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
3 years ago
Upper: c.currUpper,
Count: c.currCumulativeCount,
}
}
func (c *cumulativeBucketIterator) Err() error { return nil }
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
3 years ago
func getUpper(idx, schema int32) float64 {
if schema < 0 {
return math.Ldexp(1, int(idx)<<(-schema))
}
fracIdx := idx & ((1 << schema) - 1)
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
3 years ago
frac := exponentialBounds[schema][fracIdx]
exp := (int(idx) >> schema) + 1
return math.Ldexp(frac, exp)
}
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
3 years ago
// exponentialBounds is a precalculated table of bucket bounds in the interval
// [0.5,1) in schema 0 to 8.
var exponentialBounds = [][]float64{
// Schema "0":
{0.5},
// Schema 1:
{0.5, 0.7071067811865475},
// Schema 2:
{0.5, 0.5946035575013605, 0.7071067811865475, 0.8408964152537144},
// Schema 3:
{0.5, 0.5452538663326288, 0.5946035575013605, 0.6484197773255048,
0.7071067811865475, 0.7711054127039704, 0.8408964152537144, 0.9170040432046711},
// Schema 4:
{0.5, 0.5221368912137069, 0.5452538663326288, 0.5693943173783458,
0.5946035575013605, 0.620928906036742, 0.6484197773255048, 0.6771277734684463,
0.7071067811865475, 0.7384130729697496, 0.7711054127039704, 0.805245165974627,
0.8408964152537144, 0.8781260801866495, 0.9170040432046711, 0.9576032806985735},
// Schema 5:
{0.5, 0.5109485743270583, 0.5221368912137069, 0.5335702003384117,
0.5452538663326288, 0.5571933712979462, 0.5693943173783458, 0.5818624293887887,
0.5946035575013605, 0.6076236799902344, 0.620928906036742, 0.6345254785958666,
0.6484197773255048, 0.6626183215798706, 0.6771277734684463, 0.6919549409819159,
0.7071067811865475, 0.7225904034885232, 0.7384130729697496, 0.7545822137967112,
0.7711054127039704, 0.7879904225539431, 0.805245165974627, 0.8228777390769823,
0.8408964152537144, 0.8593096490612387, 0.8781260801866495, 0.8973545375015533,
0.9170040432046711, 0.9370838170551498, 0.9576032806985735, 0.9785720620876999},
// Schema 6:
{0.5, 0.5054446430258502, 0.5109485743270583, 0.5165124395106142,
0.5221368912137069, 0.5278225891802786, 0.5335702003384117, 0.5393803988785598,
0.5452538663326288, 0.5511912916539204, 0.5571933712979462, 0.5632608093041209,
0.5693943173783458, 0.5755946149764913, 0.5818624293887887, 0.5881984958251406,
0.5946035575013605, 0.6010783657263515, 0.6076236799902344, 0.6142402680534349,
0.620928906036742, 0.6276903785123455, 0.6345254785958666, 0.6414350080393891,
0.6484197773255048, 0.6554806057623822, 0.6626183215798706, 0.6698337620266515,
0.6771277734684463, 0.6845012114872953, 0.6919549409819159, 0.6994898362691555,
0.7071067811865475, 0.7148066691959849, 0.7225904034885232, 0.7304588970903234,
0.7384130729697496, 0.7464538641456323, 0.7545822137967112, 0.762799075372269,
0.7711054127039704, 0.7795022001189185, 0.7879904225539431, 0.7965710756711334,
0.805245165974627, 0.8140137109286738, 0.8228777390769823, 0.8318382901633681,
0.8408964152537144, 0.8500531768592616, 0.8593096490612387, 0.8686669176368529,
0.8781260801866495, 0.8876882462632604, 0.8973545375015533, 0.9071260877501991,
0.9170040432046711, 0.9269895625416926, 0.9370838170551498, 0.9472879907934827,
0.9576032806985735, 0.9680308967461471, 0.9785720620876999, 0.9892280131939752},
// Schema 7:
{0.5, 0.5027149505564014, 0.5054446430258502, 0.5081891574554764,
0.5109485743270583, 0.5137229745593818, 0.5165124395106142, 0.5193170509806894,
0.5221368912137069, 0.5249720429003435, 0.5278225891802786, 0.5306886136446309,
0.5335702003384117, 0.5364674337629877, 0.5393803988785598, 0.5423091811066545,
0.5452538663326288, 0.5482145409081883, 0.5511912916539204, 0.5541842058618393,
0.5571933712979462, 0.5602188762048033, 0.5632608093041209, 0.5663192597993595,
0.5693943173783458, 0.572486072215902, 0.5755946149764913, 0.5787200368168754,
0.5818624293887887, 0.585021884841625, 0.5881984958251406, 0.5913923554921704,
0.5946035575013605, 0.5978321960199137, 0.6010783657263515, 0.6043421618132907,
0.6076236799902344, 0.6109230164863786, 0.6142402680534349, 0.6175755319684665,
0.620928906036742, 0.6243004885946023, 0.6276903785123455, 0.6310986751971253,
0.6345254785958666, 0.637970889198196, 0.6414350080393891, 0.6449179367033329,
0.6484197773255048, 0.6519406325959679, 0.6554806057623822, 0.659039800633032,
0.6626183215798706, 0.6662162735415805, 0.6698337620266515, 0.6734708931164728,
0.6771277734684463, 0.6808045103191123, 0.6845012114872953, 0.688217985377265,
0.6919549409819159, 0.6957121878859629, 0.6994898362691555, 0.7032879969095076,
0.7071067811865475, 0.7109463010845827, 0.7148066691959849, 0.718687998724491,
0.7225904034885232, 0.7265139979245261, 0.7304588970903234, 0.7344252166684908,
0.7384130729697496, 0.7424225829363761, 0.7464538641456323, 0.7505070348132126,
0.7545822137967112, 0.7586795205991071, 0.762799075372269, 0.7669409989204777,
0.7711054127039704, 0.7752924388424999, 0.7795022001189185, 0.7837348199827764,
0.7879904225539431, 0.7922691326262467, 0.7965710756711334, 0.8008963778413465,
0.805245165974627, 0.8096175675974316, 0.8140137109286738, 0.8184337248834821,
0.8228777390769823, 0.8273458838280969, 0.8318382901633681, 0.8363550898207981,
0.8408964152537144, 0.8454623996346523, 0.8500531768592616, 0.8546688815502312,
0.8593096490612387, 0.8639756154809185, 0.8686669176368529, 0.8733836930995842,
0.8781260801866495, 0.8828942179666361, 0.8876882462632604, 0.8925083056594671,
0.8973545375015533, 0.9022270839033115, 0.9071260877501991, 0.9120516927035263,
0.9170040432046711, 0.9219832844793128, 0.9269895625416926, 0.9320230241988943,
0.9370838170551498, 0.9421720895161669, 0.9472879907934827, 0.9524316709088368,
0.9576032806985735, 0.9628029718180622, 0.9680308967461471, 0.9732872087896164,
0.9785720620876999, 0.9838856116165875, 0.9892280131939752, 0.9945994234836328},
// Schema 8:
{0.5, 0.5013556375251013, 0.5027149505564014, 0.5040779490592088,
0.5054446430258502, 0.5068150424757447, 0.5081891574554764, 0.509566998038869,
0.5109485743270583, 0.5123338964485679, 0.5137229745593818, 0.5151158188430205,
0.5165124395106142, 0.5179128468009786, 0.5193170509806894, 0.520725062344158,
0.5221368912137069, 0.5235525479396449, 0.5249720429003435, 0.526395386502313,
0.5278225891802786, 0.5292536613972564, 0.5306886136446309, 0.5321274564422321,
0.5335702003384117, 0.5350168559101208, 0.5364674337629877, 0.5379219445313954,
0.5393803988785598, 0.5408428074966075, 0.5423091811066545, 0.5437795304588847,
0.5452538663326288, 0.5467321995364429, 0.5482145409081883, 0.549700901315111,
0.5511912916539204, 0.5526857228508706, 0.5541842058618393, 0.5556867516724088,
0.5571933712979462, 0.5587040757836845, 0.5602188762048033, 0.5617377836665098,
0.5632608093041209, 0.564787964283144, 0.5663192597993595, 0.5678547070789026,
0.5693943173783458, 0.5709381019847808, 0.572486072215902, 0.5740382394200894,
0.5755946149764913, 0.5771552102951081, 0.5787200368168754, 0.5802891060137493,
0.5818624293887887, 0.5834400184762408, 0.585021884841625, 0.5866080400818185,
0.5881984958251406, 0.5897932637314379, 0.5913923554921704, 0.5929957828304968,
0.5946035575013605, 0.5962156912915756, 0.5978321960199137, 0.5994530835371903,
0.6010783657263515, 0.6027080545025619, 0.6043421618132907, 0.6059806996384005,
0.6076236799902344, 0.6092711149137041, 0.6109230164863786, 0.6125793968185725,
0.6142402680534349, 0.6159056423670379, 0.6175755319684665, 0.6192499490999082,
0.620928906036742, 0.622612415087629, 0.6243004885946023, 0.6259931389331581,
0.6276903785123455, 0.6293922197748583, 0.6310986751971253, 0.6328097572894031,
0.6345254785958666, 0.6362458516947014, 0.637970889198196, 0.6397006037528346,
0.6414350080393891, 0.6431741147730128, 0.6449179367033329, 0.6466664866145447,
0.6484197773255048, 0.6501778216898253, 0.6519406325959679, 0.6537082229673385,
0.6554806057623822, 0.6572577939746774, 0.659039800633032, 0.6608266388015788,
0.6626183215798706, 0.6644148621029772, 0.6662162735415805, 0.6680225691020727,
0.6698337620266515, 0.6716498655934177, 0.6734708931164728, 0.6752968579460171,
0.6771277734684463, 0.6789636531064505, 0.6808045103191123, 0.6826503586020058,
0.6845012114872953, 0.6863570825438342, 0.688217985377265, 0.690083933630119,
0.6919549409819159, 0.6938310211492645, 0.6957121878859629, 0.6975984549830999,
0.6994898362691555, 0.7013863456101023, 0.7032879969095076, 0.7051948041086352,
0.7071067811865475, 0.7090239421602076, 0.7109463010845827, 0.7128738720527471,
0.7148066691959849, 0.7167447066838943, 0.718687998724491, 0.7206365595643126,
0.7225904034885232, 0.7245495448210174, 0.7265139979245261, 0.7284837772007218,
0.7304588970903234, 0.7324393720732029, 0.7344252166684908, 0.7364164454346837,
0.7384130729697496, 0.7404151139112358, 0.7424225829363761, 0.7444354947621984,
0.7464538641456323, 0.7484777058836176, 0.7505070348132126, 0.7525418658117031,
0.7545822137967112, 0.7566280937263048, 0.7586795205991071, 0.7607365094544071,
0.762799075372269, 0.7648672334736434, 0.7669409989204777, 0.7690203869158282,
0.7711054127039704, 0.7731960915705107, 0.7752924388424999, 0.7773944698885442,
0.7795022001189185, 0.7816156449856788, 0.7837348199827764, 0.7858597406461707,
0.7879904225539431, 0.7901268813264122, 0.7922691326262467, 0.7944171921585818,
0.7965710756711334, 0.7987307989543135, 0.8008963778413465, 0.8030678282083853,
0.805245165974627, 0.8074284071024302, 0.8096175675974316, 0.8118126635086642,
0.8140137109286738, 0.8162207259936375, 0.8184337248834821, 0.820652723822003,
0.8228777390769823, 0.8251087869603088, 0.8273458838280969, 0.8295890460808079,
0.8318382901633681, 0.8340936325652911, 0.8363550898207981, 0.8386226785089391,
0.8408964152537144, 0.8431763167241966, 0.8454623996346523, 0.8477546807446661,
0.8500531768592616, 0.8523579048290255, 0.8546688815502312, 0.8569861239649629,
0.8593096490612387, 0.8616394738731368, 0.8639756154809185, 0.8663180910111553,
0.8686669176368529, 0.871022112577578, 0.8733836930995842, 0.8757516765159389,
0.8781260801866495, 0.8805069215187917, 0.8828942179666361, 0.8852879870317771,
0.8876882462632604, 0.890095013257712, 0.8925083056594671, 0.8949281411607002,
0.8973545375015533, 0.8997875124702672, 0.9022270839033115, 0.9046732696855155,
0.9071260877501991, 0.909585556079304, 0.9120516927035263, 0.9145245157024483,
0.9170040432046711, 0.9194902933879467, 0.9219832844793128, 0.9244830347552253,
0.9269895625416926, 0.92950288621441, 0.9320230241988943, 0.9345499949706191,
0.9370838170551498, 0.93962450902828, 0.9421720895161669, 0.9447265771954693,
0.9472879907934827, 0.9498563490882775, 0.9524316709088368, 0.9550139751351947,
0.9576032806985735, 0.9601996065815236, 0.9628029718180622, 0.9654133954938133,
0.9680308967461471, 0.9706554947643201, 0.9732872087896164, 0.9759260581154889,
0.9785720620876999, 0.9812252401044634, 0.9838856116165875, 0.9865531961276168,
0.9892280131939752, 0.9919100824251095, 0.9945994234836328, 0.9972960560854698},
}