You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
prometheus/storage/remote/queue_manager_test.go

245 lines
6.2 KiB

// Copyright 2013 The Prometheus Authors
Add optional sample replication to OpenTSDB. Prometheus needs long-term storage. Since we don't have enough resources to build our own timeseries storage from scratch ontop of Riak, Cassandra or a similar distributed datastore at the moment, we're planning on using OpenTSDB as long-term storage for Prometheus. It's data model is roughly compatible with that of Prometheus, with some caveats. As a first step, this adds write-only replication from Prometheus to OpenTSDB, with the following things worth noting: 1) I tried to keep the integration lightweight, meaning that anything related to OpenTSDB is isolated to its own package and only main knows about it (essentially it tees all samples to both the existing storage and TSDB). It's not touching the existing TieredStorage at all to avoid more complexity in that area. This might change in the future, especially if we decide to implement a read path for OpenTSDB through Prometheus as well. 2) Backpressure while sending to OpenTSDB is handled by simply dropping samples on the floor when the in-memory queue of samples destined for OpenTSDB runs full. Prometheus also only attempts to send samples once, rather than implementing a complex retry algorithm. Thus, replication to OpenTSDB is best-effort for now. If needed, this may be extended in the future. 3) Samples are sent in batches of limited size to OpenTSDB. The optimal batch size, timeout parameters, etc. may need to be adjusted in the future. 4) OpenTSDB has different rules for legal characters in tag (label) values. While Prometheus allows any characters in label values, OpenTSDB limits them to a to z, A to Z, 0 to 9, -, _, . and /. Currently any illegal characters in Prometheus label values are simply replaced by an underscore. Especially when integrating OpenTSDB with the read path in Prometheus, we'll need to reconsider this: either we'll need to introduce the same limitations for Prometheus labels or escape/encode illegal characters in OpenTSDB in such a way that they are fully decodable again when reading through Prometheus, so that corresponding timeseries in both systems match in their labelsets. Change-Id: I8394c9c55dbac3946a0fa497f566d5e6e2d600b5
11 years ago
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package remote
import (
"fmt"
Add optional sample replication to OpenTSDB. Prometheus needs long-term storage. Since we don't have enough resources to build our own timeseries storage from scratch ontop of Riak, Cassandra or a similar distributed datastore at the moment, we're planning on using OpenTSDB as long-term storage for Prometheus. It's data model is roughly compatible with that of Prometheus, with some caveats. As a first step, this adds write-only replication from Prometheus to OpenTSDB, with the following things worth noting: 1) I tried to keep the integration lightweight, meaning that anything related to OpenTSDB is isolated to its own package and only main knows about it (essentially it tees all samples to both the existing storage and TSDB). It's not touching the existing TieredStorage at all to avoid more complexity in that area. This might change in the future, especially if we decide to implement a read path for OpenTSDB through Prometheus as well. 2) Backpressure while sending to OpenTSDB is handled by simply dropping samples on the floor when the in-memory queue of samples destined for OpenTSDB runs full. Prometheus also only attempts to send samples once, rather than implementing a complex retry algorithm. Thus, replication to OpenTSDB is best-effort for now. If needed, this may be extended in the future. 3) Samples are sent in batches of limited size to OpenTSDB. The optimal batch size, timeout parameters, etc. may need to be adjusted in the future. 4) OpenTSDB has different rules for legal characters in tag (label) values. While Prometheus allows any characters in label values, OpenTSDB limits them to a to z, A to Z, 0 to 9, -, _, . and /. Currently any illegal characters in Prometheus label values are simply replaced by an underscore. Especially when integrating OpenTSDB with the read path in Prometheus, we'll need to reconsider this: either we'll need to introduce the same limitations for Prometheus labels or escape/encode illegal characters in OpenTSDB in such a way that they are fully decodable again when reading through Prometheus, so that corresponding timeseries in both systems match in their labelsets. Change-Id: I8394c9c55dbac3946a0fa497f566d5e6e2d600b5
11 years ago
"sync"
"sync/atomic"
Add optional sample replication to OpenTSDB. Prometheus needs long-term storage. Since we don't have enough resources to build our own timeseries storage from scratch ontop of Riak, Cassandra or a similar distributed datastore at the moment, we're planning on using OpenTSDB as long-term storage for Prometheus. It's data model is roughly compatible with that of Prometheus, with some caveats. As a first step, this adds write-only replication from Prometheus to OpenTSDB, with the following things worth noting: 1) I tried to keep the integration lightweight, meaning that anything related to OpenTSDB is isolated to its own package and only main knows about it (essentially it tees all samples to both the existing storage and TSDB). It's not touching the existing TieredStorage at all to avoid more complexity in that area. This might change in the future, especially if we decide to implement a read path for OpenTSDB through Prometheus as well. 2) Backpressure while sending to OpenTSDB is handled by simply dropping samples on the floor when the in-memory queue of samples destined for OpenTSDB runs full. Prometheus also only attempts to send samples once, rather than implementing a complex retry algorithm. Thus, replication to OpenTSDB is best-effort for now. If needed, this may be extended in the future. 3) Samples are sent in batches of limited size to OpenTSDB. The optimal batch size, timeout parameters, etc. may need to be adjusted in the future. 4) OpenTSDB has different rules for legal characters in tag (label) values. While Prometheus allows any characters in label values, OpenTSDB limits them to a to z, A to Z, 0 to 9, -, _, . and /. Currently any illegal characters in Prometheus label values are simply replaced by an underscore. Especially when integrating OpenTSDB with the read path in Prometheus, we'll need to reconsider this: either we'll need to introduce the same limitations for Prometheus labels or escape/encode illegal characters in OpenTSDB in such a way that they are fully decodable again when reading through Prometheus, so that corresponding timeseries in both systems match in their labelsets. Change-Id: I8394c9c55dbac3946a0fa497f566d5e6e2d600b5
11 years ago
"testing"
"time"
Add optional sample replication to OpenTSDB. Prometheus needs long-term storage. Since we don't have enough resources to build our own timeseries storage from scratch ontop of Riak, Cassandra or a similar distributed datastore at the moment, we're planning on using OpenTSDB as long-term storage for Prometheus. It's data model is roughly compatible with that of Prometheus, with some caveats. As a first step, this adds write-only replication from Prometheus to OpenTSDB, with the following things worth noting: 1) I tried to keep the integration lightweight, meaning that anything related to OpenTSDB is isolated to its own package and only main knows about it (essentially it tees all samples to both the existing storage and TSDB). It's not touching the existing TieredStorage at all to avoid more complexity in that area. This might change in the future, especially if we decide to implement a read path for OpenTSDB through Prometheus as well. 2) Backpressure while sending to OpenTSDB is handled by simply dropping samples on the floor when the in-memory queue of samples destined for OpenTSDB runs full. Prometheus also only attempts to send samples once, rather than implementing a complex retry algorithm. Thus, replication to OpenTSDB is best-effort for now. If needed, this may be extended in the future. 3) Samples are sent in batches of limited size to OpenTSDB. The optimal batch size, timeout parameters, etc. may need to be adjusted in the future. 4) OpenTSDB has different rules for legal characters in tag (label) values. While Prometheus allows any characters in label values, OpenTSDB limits them to a to z, A to Z, 0 to 9, -, _, . and /. Currently any illegal characters in Prometheus label values are simply replaced by an underscore. Especially when integrating OpenTSDB with the read path in Prometheus, we'll need to reconsider this: either we'll need to introduce the same limitations for Prometheus labels or escape/encode illegal characters in OpenTSDB in such a way that they are fully decodable again when reading through Prometheus, so that corresponding timeseries in both systems match in their labelsets. Change-Id: I8394c9c55dbac3946a0fa497f566d5e6e2d600b5
11 years ago
"github.com/prometheus/common/model"
Add optional sample replication to OpenTSDB. Prometheus needs long-term storage. Since we don't have enough resources to build our own timeseries storage from scratch ontop of Riak, Cassandra or a similar distributed datastore at the moment, we're planning on using OpenTSDB as long-term storage for Prometheus. It's data model is roughly compatible with that of Prometheus, with some caveats. As a first step, this adds write-only replication from Prometheus to OpenTSDB, with the following things worth noting: 1) I tried to keep the integration lightweight, meaning that anything related to OpenTSDB is isolated to its own package and only main knows about it (essentially it tees all samples to both the existing storage and TSDB). It's not touching the existing TieredStorage at all to avoid more complexity in that area. This might change in the future, especially if we decide to implement a read path for OpenTSDB through Prometheus as well. 2) Backpressure while sending to OpenTSDB is handled by simply dropping samples on the floor when the in-memory queue of samples destined for OpenTSDB runs full. Prometheus also only attempts to send samples once, rather than implementing a complex retry algorithm. Thus, replication to OpenTSDB is best-effort for now. If needed, this may be extended in the future. 3) Samples are sent in batches of limited size to OpenTSDB. The optimal batch size, timeout parameters, etc. may need to be adjusted in the future. 4) OpenTSDB has different rules for legal characters in tag (label) values. While Prometheus allows any characters in label values, OpenTSDB limits them to a to z, A to Z, 0 to 9, -, _, . and /. Currently any illegal characters in Prometheus label values are simply replaced by an underscore. Especially when integrating OpenTSDB with the read path in Prometheus, we'll need to reconsider this: either we'll need to introduce the same limitations for Prometheus labels or escape/encode illegal characters in OpenTSDB in such a way that they are fully decodable again when reading through Prometheus, so that corresponding timeseries in both systems match in their labelsets. Change-Id: I8394c9c55dbac3946a0fa497f566d5e6e2d600b5
11 years ago
)
type TestStorageClient struct {
receivedSamples map[string]model.Samples
expectedSamples map[string]model.Samples
Add optional sample replication to OpenTSDB. Prometheus needs long-term storage. Since we don't have enough resources to build our own timeseries storage from scratch ontop of Riak, Cassandra or a similar distributed datastore at the moment, we're planning on using OpenTSDB as long-term storage for Prometheus. It's data model is roughly compatible with that of Prometheus, with some caveats. As a first step, this adds write-only replication from Prometheus to OpenTSDB, with the following things worth noting: 1) I tried to keep the integration lightweight, meaning that anything related to OpenTSDB is isolated to its own package and only main knows about it (essentially it tees all samples to both the existing storage and TSDB). It's not touching the existing TieredStorage at all to avoid more complexity in that area. This might change in the future, especially if we decide to implement a read path for OpenTSDB through Prometheus as well. 2) Backpressure while sending to OpenTSDB is handled by simply dropping samples on the floor when the in-memory queue of samples destined for OpenTSDB runs full. Prometheus also only attempts to send samples once, rather than implementing a complex retry algorithm. Thus, replication to OpenTSDB is best-effort for now. If needed, this may be extended in the future. 3) Samples are sent in batches of limited size to OpenTSDB. The optimal batch size, timeout parameters, etc. may need to be adjusted in the future. 4) OpenTSDB has different rules for legal characters in tag (label) values. While Prometheus allows any characters in label values, OpenTSDB limits them to a to z, A to Z, 0 to 9, -, _, . and /. Currently any illegal characters in Prometheus label values are simply replaced by an underscore. Especially when integrating OpenTSDB with the read path in Prometheus, we'll need to reconsider this: either we'll need to introduce the same limitations for Prometheus labels or escape/encode illegal characters in OpenTSDB in such a way that they are fully decodable again when reading through Prometheus, so that corresponding timeseries in both systems match in their labelsets. Change-Id: I8394c9c55dbac3946a0fa497f566d5e6e2d600b5
11 years ago
wg sync.WaitGroup
mtx sync.Mutex
Add optional sample replication to OpenTSDB. Prometheus needs long-term storage. Since we don't have enough resources to build our own timeseries storage from scratch ontop of Riak, Cassandra or a similar distributed datastore at the moment, we're planning on using OpenTSDB as long-term storage for Prometheus. It's data model is roughly compatible with that of Prometheus, with some caveats. As a first step, this adds write-only replication from Prometheus to OpenTSDB, with the following things worth noting: 1) I tried to keep the integration lightweight, meaning that anything related to OpenTSDB is isolated to its own package and only main knows about it (essentially it tees all samples to both the existing storage and TSDB). It's not touching the existing TieredStorage at all to avoid more complexity in that area. This might change in the future, especially if we decide to implement a read path for OpenTSDB through Prometheus as well. 2) Backpressure while sending to OpenTSDB is handled by simply dropping samples on the floor when the in-memory queue of samples destined for OpenTSDB runs full. Prometheus also only attempts to send samples once, rather than implementing a complex retry algorithm. Thus, replication to OpenTSDB is best-effort for now. If needed, this may be extended in the future. 3) Samples are sent in batches of limited size to OpenTSDB. The optimal batch size, timeout parameters, etc. may need to be adjusted in the future. 4) OpenTSDB has different rules for legal characters in tag (label) values. While Prometheus allows any characters in label values, OpenTSDB limits them to a to z, A to Z, 0 to 9, -, _, . and /. Currently any illegal characters in Prometheus label values are simply replaced by an underscore. Especially when integrating OpenTSDB with the read path in Prometheus, we'll need to reconsider this: either we'll need to introduce the same limitations for Prometheus labels or escape/encode illegal characters in OpenTSDB in such a way that they are fully decodable again when reading through Prometheus, so that corresponding timeseries in both systems match in their labelsets. Change-Id: I8394c9c55dbac3946a0fa497f566d5e6e2d600b5
11 years ago
}
func NewTestStorageClient() *TestStorageClient {
return &TestStorageClient{
receivedSamples: map[string]model.Samples{},
expectedSamples: map[string]model.Samples{},
}
}
func (c *TestStorageClient) expectSamples(ss model.Samples) {
c.mtx.Lock()
defer c.mtx.Unlock()
for _, s := range ss {
ts := s.Metric.String()
c.expectedSamples[ts] = append(c.expectedSamples[ts], s)
}
c.wg.Add(len(ss))
Add optional sample replication to OpenTSDB. Prometheus needs long-term storage. Since we don't have enough resources to build our own timeseries storage from scratch ontop of Riak, Cassandra or a similar distributed datastore at the moment, we're planning on using OpenTSDB as long-term storage for Prometheus. It's data model is roughly compatible with that of Prometheus, with some caveats. As a first step, this adds write-only replication from Prometheus to OpenTSDB, with the following things worth noting: 1) I tried to keep the integration lightweight, meaning that anything related to OpenTSDB is isolated to its own package and only main knows about it (essentially it tees all samples to both the existing storage and TSDB). It's not touching the existing TieredStorage at all to avoid more complexity in that area. This might change in the future, especially if we decide to implement a read path for OpenTSDB through Prometheus as well. 2) Backpressure while sending to OpenTSDB is handled by simply dropping samples on the floor when the in-memory queue of samples destined for OpenTSDB runs full. Prometheus also only attempts to send samples once, rather than implementing a complex retry algorithm. Thus, replication to OpenTSDB is best-effort for now. If needed, this may be extended in the future. 3) Samples are sent in batches of limited size to OpenTSDB. The optimal batch size, timeout parameters, etc. may need to be adjusted in the future. 4) OpenTSDB has different rules for legal characters in tag (label) values. While Prometheus allows any characters in label values, OpenTSDB limits them to a to z, A to Z, 0 to 9, -, _, . and /. Currently any illegal characters in Prometheus label values are simply replaced by an underscore. Especially when integrating OpenTSDB with the read path in Prometheus, we'll need to reconsider this: either we'll need to introduce the same limitations for Prometheus labels or escape/encode illegal characters in OpenTSDB in such a way that they are fully decodable again when reading through Prometheus, so that corresponding timeseries in both systems match in their labelsets. Change-Id: I8394c9c55dbac3946a0fa497f566d5e6e2d600b5
11 years ago
}
func (c *TestStorageClient) waitForExpectedSamples(t *testing.T) {
Add optional sample replication to OpenTSDB. Prometheus needs long-term storage. Since we don't have enough resources to build our own timeseries storage from scratch ontop of Riak, Cassandra or a similar distributed datastore at the moment, we're planning on using OpenTSDB as long-term storage for Prometheus. It's data model is roughly compatible with that of Prometheus, with some caveats. As a first step, this adds write-only replication from Prometheus to OpenTSDB, with the following things worth noting: 1) I tried to keep the integration lightweight, meaning that anything related to OpenTSDB is isolated to its own package and only main knows about it (essentially it tees all samples to both the existing storage and TSDB). It's not touching the existing TieredStorage at all to avoid more complexity in that area. This might change in the future, especially if we decide to implement a read path for OpenTSDB through Prometheus as well. 2) Backpressure while sending to OpenTSDB is handled by simply dropping samples on the floor when the in-memory queue of samples destined for OpenTSDB runs full. Prometheus also only attempts to send samples once, rather than implementing a complex retry algorithm. Thus, replication to OpenTSDB is best-effort for now. If needed, this may be extended in the future. 3) Samples are sent in batches of limited size to OpenTSDB. The optimal batch size, timeout parameters, etc. may need to be adjusted in the future. 4) OpenTSDB has different rules for legal characters in tag (label) values. While Prometheus allows any characters in label values, OpenTSDB limits them to a to z, A to Z, 0 to 9, -, _, . and /. Currently any illegal characters in Prometheus label values are simply replaced by an underscore. Especially when integrating OpenTSDB with the read path in Prometheus, we'll need to reconsider this: either we'll need to introduce the same limitations for Prometheus labels or escape/encode illegal characters in OpenTSDB in such a way that they are fully decodable again when reading through Prometheus, so that corresponding timeseries in both systems match in their labelsets. Change-Id: I8394c9c55dbac3946a0fa497f566d5e6e2d600b5
11 years ago
c.wg.Wait()
c.mtx.Lock()
defer c.mtx.Unlock()
for ts, expectedSamples := range c.expectedSamples {
for i, expected := range expectedSamples {
if !expected.Equal(c.receivedSamples[ts][i]) {
t.Fatalf("%d. Expected %v, got %v", i, expected, c.receivedSamples[ts][i])
}
Add optional sample replication to OpenTSDB. Prometheus needs long-term storage. Since we don't have enough resources to build our own timeseries storage from scratch ontop of Riak, Cassandra or a similar distributed datastore at the moment, we're planning on using OpenTSDB as long-term storage for Prometheus. It's data model is roughly compatible with that of Prometheus, with some caveats. As a first step, this adds write-only replication from Prometheus to OpenTSDB, with the following things worth noting: 1) I tried to keep the integration lightweight, meaning that anything related to OpenTSDB is isolated to its own package and only main knows about it (essentially it tees all samples to both the existing storage and TSDB). It's not touching the existing TieredStorage at all to avoid more complexity in that area. This might change in the future, especially if we decide to implement a read path for OpenTSDB through Prometheus as well. 2) Backpressure while sending to OpenTSDB is handled by simply dropping samples on the floor when the in-memory queue of samples destined for OpenTSDB runs full. Prometheus also only attempts to send samples once, rather than implementing a complex retry algorithm. Thus, replication to OpenTSDB is best-effort for now. If needed, this may be extended in the future. 3) Samples are sent in batches of limited size to OpenTSDB. The optimal batch size, timeout parameters, etc. may need to be adjusted in the future. 4) OpenTSDB has different rules for legal characters in tag (label) values. While Prometheus allows any characters in label values, OpenTSDB limits them to a to z, A to Z, 0 to 9, -, _, . and /. Currently any illegal characters in Prometheus label values are simply replaced by an underscore. Especially when integrating OpenTSDB with the read path in Prometheus, we'll need to reconsider this: either we'll need to introduce the same limitations for Prometheus labels or escape/encode illegal characters in OpenTSDB in such a way that they are fully decodable again when reading through Prometheus, so that corresponding timeseries in both systems match in their labelsets. Change-Id: I8394c9c55dbac3946a0fa497f566d5e6e2d600b5
11 years ago
}
}
}
func (c *TestStorageClient) Store(ss model.Samples) error {
c.mtx.Lock()
defer c.mtx.Unlock()
for _, s := range ss {
ts := s.Metric.String()
c.receivedSamples[ts] = append(c.receivedSamples[ts], s)
}
c.wg.Add(-len(ss))
Add optional sample replication to OpenTSDB. Prometheus needs long-term storage. Since we don't have enough resources to build our own timeseries storage from scratch ontop of Riak, Cassandra or a similar distributed datastore at the moment, we're planning on using OpenTSDB as long-term storage for Prometheus. It's data model is roughly compatible with that of Prometheus, with some caveats. As a first step, this adds write-only replication from Prometheus to OpenTSDB, with the following things worth noting: 1) I tried to keep the integration lightweight, meaning that anything related to OpenTSDB is isolated to its own package and only main knows about it (essentially it tees all samples to both the existing storage and TSDB). It's not touching the existing TieredStorage at all to avoid more complexity in that area. This might change in the future, especially if we decide to implement a read path for OpenTSDB through Prometheus as well. 2) Backpressure while sending to OpenTSDB is handled by simply dropping samples on the floor when the in-memory queue of samples destined for OpenTSDB runs full. Prometheus also only attempts to send samples once, rather than implementing a complex retry algorithm. Thus, replication to OpenTSDB is best-effort for now. If needed, this may be extended in the future. 3) Samples are sent in batches of limited size to OpenTSDB. The optimal batch size, timeout parameters, etc. may need to be adjusted in the future. 4) OpenTSDB has different rules for legal characters in tag (label) values. While Prometheus allows any characters in label values, OpenTSDB limits them to a to z, A to Z, 0 to 9, -, _, . and /. Currently any illegal characters in Prometheus label values are simply replaced by an underscore. Especially when integrating OpenTSDB with the read path in Prometheus, we'll need to reconsider this: either we'll need to introduce the same limitations for Prometheus labels or escape/encode illegal characters in OpenTSDB in such a way that they are fully decodable again when reading through Prometheus, so that corresponding timeseries in both systems match in their labelsets. Change-Id: I8394c9c55dbac3946a0fa497f566d5e6e2d600b5
11 years ago
return nil
}
func (c *TestStorageClient) Name() string {
return "teststorageclient"
}
Add optional sample replication to OpenTSDB. Prometheus needs long-term storage. Since we don't have enough resources to build our own timeseries storage from scratch ontop of Riak, Cassandra or a similar distributed datastore at the moment, we're planning on using OpenTSDB as long-term storage for Prometheus. It's data model is roughly compatible with that of Prometheus, with some caveats. As a first step, this adds write-only replication from Prometheus to OpenTSDB, with the following things worth noting: 1) I tried to keep the integration lightweight, meaning that anything related to OpenTSDB is isolated to its own package and only main knows about it (essentially it tees all samples to both the existing storage and TSDB). It's not touching the existing TieredStorage at all to avoid more complexity in that area. This might change in the future, especially if we decide to implement a read path for OpenTSDB through Prometheus as well. 2) Backpressure while sending to OpenTSDB is handled by simply dropping samples on the floor when the in-memory queue of samples destined for OpenTSDB runs full. Prometheus also only attempts to send samples once, rather than implementing a complex retry algorithm. Thus, replication to OpenTSDB is best-effort for now. If needed, this may be extended in the future. 3) Samples are sent in batches of limited size to OpenTSDB. The optimal batch size, timeout parameters, etc. may need to be adjusted in the future. 4) OpenTSDB has different rules for legal characters in tag (label) values. While Prometheus allows any characters in label values, OpenTSDB limits them to a to z, A to Z, 0 to 9, -, _, . and /. Currently any illegal characters in Prometheus label values are simply replaced by an underscore. Especially when integrating OpenTSDB with the read path in Prometheus, we'll need to reconsider this: either we'll need to introduce the same limitations for Prometheus labels or escape/encode illegal characters in OpenTSDB in such a way that they are fully decodable again when reading through Prometheus, so that corresponding timeseries in both systems match in their labelsets. Change-Id: I8394c9c55dbac3946a0fa497f566d5e6e2d600b5
11 years ago
func TestSampleDelivery(t *testing.T) {
// Let's create an even number of send batches so we don't run into the
// batch timeout case.
cfg := defaultConfig
n := cfg.QueueCapacity * 2
cfg.Shards = 1
Add optional sample replication to OpenTSDB. Prometheus needs long-term storage. Since we don't have enough resources to build our own timeseries storage from scratch ontop of Riak, Cassandra or a similar distributed datastore at the moment, we're planning on using OpenTSDB as long-term storage for Prometheus. It's data model is roughly compatible with that of Prometheus, with some caveats. As a first step, this adds write-only replication from Prometheus to OpenTSDB, with the following things worth noting: 1) I tried to keep the integration lightweight, meaning that anything related to OpenTSDB is isolated to its own package and only main knows about it (essentially it tees all samples to both the existing storage and TSDB). It's not touching the existing TieredStorage at all to avoid more complexity in that area. This might change in the future, especially if we decide to implement a read path for OpenTSDB through Prometheus as well. 2) Backpressure while sending to OpenTSDB is handled by simply dropping samples on the floor when the in-memory queue of samples destined for OpenTSDB runs full. Prometheus also only attempts to send samples once, rather than implementing a complex retry algorithm. Thus, replication to OpenTSDB is best-effort for now. If needed, this may be extended in the future. 3) Samples are sent in batches of limited size to OpenTSDB. The optimal batch size, timeout parameters, etc. may need to be adjusted in the future. 4) OpenTSDB has different rules for legal characters in tag (label) values. While Prometheus allows any characters in label values, OpenTSDB limits them to a to z, A to Z, 0 to 9, -, _, . and /. Currently any illegal characters in Prometheus label values are simply replaced by an underscore. Especially when integrating OpenTSDB with the read path in Prometheus, we'll need to reconsider this: either we'll need to introduce the same limitations for Prometheus labels or escape/encode illegal characters in OpenTSDB in such a way that they are fully decodable again when reading through Prometheus, so that corresponding timeseries in both systems match in their labelsets. Change-Id: I8394c9c55dbac3946a0fa497f566d5e6e2d600b5
11 years ago
samples := make(model.Samples, 0, n)
Add optional sample replication to OpenTSDB. Prometheus needs long-term storage. Since we don't have enough resources to build our own timeseries storage from scratch ontop of Riak, Cassandra or a similar distributed datastore at the moment, we're planning on using OpenTSDB as long-term storage for Prometheus. It's data model is roughly compatible with that of Prometheus, with some caveats. As a first step, this adds write-only replication from Prometheus to OpenTSDB, with the following things worth noting: 1) I tried to keep the integration lightweight, meaning that anything related to OpenTSDB is isolated to its own package and only main knows about it (essentially it tees all samples to both the existing storage and TSDB). It's not touching the existing TieredStorage at all to avoid more complexity in that area. This might change in the future, especially if we decide to implement a read path for OpenTSDB through Prometheus as well. 2) Backpressure while sending to OpenTSDB is handled by simply dropping samples on the floor when the in-memory queue of samples destined for OpenTSDB runs full. Prometheus also only attempts to send samples once, rather than implementing a complex retry algorithm. Thus, replication to OpenTSDB is best-effort for now. If needed, this may be extended in the future. 3) Samples are sent in batches of limited size to OpenTSDB. The optimal batch size, timeout parameters, etc. may need to be adjusted in the future. 4) OpenTSDB has different rules for legal characters in tag (label) values. While Prometheus allows any characters in label values, OpenTSDB limits them to a to z, A to Z, 0 to 9, -, _, . and /. Currently any illegal characters in Prometheus label values are simply replaced by an underscore. Especially when integrating OpenTSDB with the read path in Prometheus, we'll need to reconsider this: either we'll need to introduce the same limitations for Prometheus labels or escape/encode illegal characters in OpenTSDB in such a way that they are fully decodable again when reading through Prometheus, so that corresponding timeseries in both systems match in their labelsets. Change-Id: I8394c9c55dbac3946a0fa497f566d5e6e2d600b5
11 years ago
for i := 0; i < n; i++ {
name := model.LabelValue(fmt.Sprintf("test_metric_%d", i))
samples = append(samples, &model.Sample{
Metric: model.Metric{
model.MetricNameLabel: name,
Add optional sample replication to OpenTSDB. Prometheus needs long-term storage. Since we don't have enough resources to build our own timeseries storage from scratch ontop of Riak, Cassandra or a similar distributed datastore at the moment, we're planning on using OpenTSDB as long-term storage for Prometheus. It's data model is roughly compatible with that of Prometheus, with some caveats. As a first step, this adds write-only replication from Prometheus to OpenTSDB, with the following things worth noting: 1) I tried to keep the integration lightweight, meaning that anything related to OpenTSDB is isolated to its own package and only main knows about it (essentially it tees all samples to both the existing storage and TSDB). It's not touching the existing TieredStorage at all to avoid more complexity in that area. This might change in the future, especially if we decide to implement a read path for OpenTSDB through Prometheus as well. 2) Backpressure while sending to OpenTSDB is handled by simply dropping samples on the floor when the in-memory queue of samples destined for OpenTSDB runs full. Prometheus also only attempts to send samples once, rather than implementing a complex retry algorithm. Thus, replication to OpenTSDB is best-effort for now. If needed, this may be extended in the future. 3) Samples are sent in batches of limited size to OpenTSDB. The optimal batch size, timeout parameters, etc. may need to be adjusted in the future. 4) OpenTSDB has different rules for legal characters in tag (label) values. While Prometheus allows any characters in label values, OpenTSDB limits them to a to z, A to Z, 0 to 9, -, _, . and /. Currently any illegal characters in Prometheus label values are simply replaced by an underscore. Especially when integrating OpenTSDB with the read path in Prometheus, we'll need to reconsider this: either we'll need to introduce the same limitations for Prometheus labels or escape/encode illegal characters in OpenTSDB in such a way that they are fully decodable again when reading through Prometheus, so that corresponding timeseries in both systems match in their labelsets. Change-Id: I8394c9c55dbac3946a0fa497f566d5e6e2d600b5
11 years ago
},
Value: model.SampleValue(i),
Add optional sample replication to OpenTSDB. Prometheus needs long-term storage. Since we don't have enough resources to build our own timeseries storage from scratch ontop of Riak, Cassandra or a similar distributed datastore at the moment, we're planning on using OpenTSDB as long-term storage for Prometheus. It's data model is roughly compatible with that of Prometheus, with some caveats. As a first step, this adds write-only replication from Prometheus to OpenTSDB, with the following things worth noting: 1) I tried to keep the integration lightweight, meaning that anything related to OpenTSDB is isolated to its own package and only main knows about it (essentially it tees all samples to both the existing storage and TSDB). It's not touching the existing TieredStorage at all to avoid more complexity in that area. This might change in the future, especially if we decide to implement a read path for OpenTSDB through Prometheus as well. 2) Backpressure while sending to OpenTSDB is handled by simply dropping samples on the floor when the in-memory queue of samples destined for OpenTSDB runs full. Prometheus also only attempts to send samples once, rather than implementing a complex retry algorithm. Thus, replication to OpenTSDB is best-effort for now. If needed, this may be extended in the future. 3) Samples are sent in batches of limited size to OpenTSDB. The optimal batch size, timeout parameters, etc. may need to be adjusted in the future. 4) OpenTSDB has different rules for legal characters in tag (label) values. While Prometheus allows any characters in label values, OpenTSDB limits them to a to z, A to Z, 0 to 9, -, _, . and /. Currently any illegal characters in Prometheus label values are simply replaced by an underscore. Especially when integrating OpenTSDB with the read path in Prometheus, we'll need to reconsider this: either we'll need to introduce the same limitations for Prometheus labels or escape/encode illegal characters in OpenTSDB in such a way that they are fully decodable again when reading through Prometheus, so that corresponding timeseries in both systems match in their labelsets. Change-Id: I8394c9c55dbac3946a0fa497f566d5e6e2d600b5
11 years ago
})
}
c := NewTestStorageClient()
Add optional sample replication to OpenTSDB. Prometheus needs long-term storage. Since we don't have enough resources to build our own timeseries storage from scratch ontop of Riak, Cassandra or a similar distributed datastore at the moment, we're planning on using OpenTSDB as long-term storage for Prometheus. It's data model is roughly compatible with that of Prometheus, with some caveats. As a first step, this adds write-only replication from Prometheus to OpenTSDB, with the following things worth noting: 1) I tried to keep the integration lightweight, meaning that anything related to OpenTSDB is isolated to its own package and only main knows about it (essentially it tees all samples to both the existing storage and TSDB). It's not touching the existing TieredStorage at all to avoid more complexity in that area. This might change in the future, especially if we decide to implement a read path for OpenTSDB through Prometheus as well. 2) Backpressure while sending to OpenTSDB is handled by simply dropping samples on the floor when the in-memory queue of samples destined for OpenTSDB runs full. Prometheus also only attempts to send samples once, rather than implementing a complex retry algorithm. Thus, replication to OpenTSDB is best-effort for now. If needed, this may be extended in the future. 3) Samples are sent in batches of limited size to OpenTSDB. The optimal batch size, timeout parameters, etc. may need to be adjusted in the future. 4) OpenTSDB has different rules for legal characters in tag (label) values. While Prometheus allows any characters in label values, OpenTSDB limits them to a to z, A to Z, 0 to 9, -, _, . and /. Currently any illegal characters in Prometheus label values are simply replaced by an underscore. Especially when integrating OpenTSDB with the read path in Prometheus, we'll need to reconsider this: either we'll need to introduce the same limitations for Prometheus labels or escape/encode illegal characters in OpenTSDB in such a way that they are fully decodable again when reading through Prometheus, so that corresponding timeseries in both systems match in their labelsets. Change-Id: I8394c9c55dbac3946a0fa497f566d5e6e2d600b5
11 years ago
c.expectSamples(samples[:len(samples)/2])
m := NewStorageQueueManager(c, &cfg)
Add optional sample replication to OpenTSDB. Prometheus needs long-term storage. Since we don't have enough resources to build our own timeseries storage from scratch ontop of Riak, Cassandra or a similar distributed datastore at the moment, we're planning on using OpenTSDB as long-term storage for Prometheus. It's data model is roughly compatible with that of Prometheus, with some caveats. As a first step, this adds write-only replication from Prometheus to OpenTSDB, with the following things worth noting: 1) I tried to keep the integration lightweight, meaning that anything related to OpenTSDB is isolated to its own package and only main knows about it (essentially it tees all samples to both the existing storage and TSDB). It's not touching the existing TieredStorage at all to avoid more complexity in that area. This might change in the future, especially if we decide to implement a read path for OpenTSDB through Prometheus as well. 2) Backpressure while sending to OpenTSDB is handled by simply dropping samples on the floor when the in-memory queue of samples destined for OpenTSDB runs full. Prometheus also only attempts to send samples once, rather than implementing a complex retry algorithm. Thus, replication to OpenTSDB is best-effort for now. If needed, this may be extended in the future. 3) Samples are sent in batches of limited size to OpenTSDB. The optimal batch size, timeout parameters, etc. may need to be adjusted in the future. 4) OpenTSDB has different rules for legal characters in tag (label) values. While Prometheus allows any characters in label values, OpenTSDB limits them to a to z, A to Z, 0 to 9, -, _, . and /. Currently any illegal characters in Prometheus label values are simply replaced by an underscore. Especially when integrating OpenTSDB with the read path in Prometheus, we'll need to reconsider this: either we'll need to introduce the same limitations for Prometheus labels or escape/encode illegal characters in OpenTSDB in such a way that they are fully decodable again when reading through Prometheus, so that corresponding timeseries in both systems match in their labelsets. Change-Id: I8394c9c55dbac3946a0fa497f566d5e6e2d600b5
11 years ago
// These should be received by the client.
for _, s := range samples[:len(samples)/2] {
m.Append(s)
}
Add optional sample replication to OpenTSDB. Prometheus needs long-term storage. Since we don't have enough resources to build our own timeseries storage from scratch ontop of Riak, Cassandra or a similar distributed datastore at the moment, we're planning on using OpenTSDB as long-term storage for Prometheus. It's data model is roughly compatible with that of Prometheus, with some caveats. As a first step, this adds write-only replication from Prometheus to OpenTSDB, with the following things worth noting: 1) I tried to keep the integration lightweight, meaning that anything related to OpenTSDB is isolated to its own package and only main knows about it (essentially it tees all samples to both the existing storage and TSDB). It's not touching the existing TieredStorage at all to avoid more complexity in that area. This might change in the future, especially if we decide to implement a read path for OpenTSDB through Prometheus as well. 2) Backpressure while sending to OpenTSDB is handled by simply dropping samples on the floor when the in-memory queue of samples destined for OpenTSDB runs full. Prometheus also only attempts to send samples once, rather than implementing a complex retry algorithm. Thus, replication to OpenTSDB is best-effort for now. If needed, this may be extended in the future. 3) Samples are sent in batches of limited size to OpenTSDB. The optimal batch size, timeout parameters, etc. may need to be adjusted in the future. 4) OpenTSDB has different rules for legal characters in tag (label) values. While Prometheus allows any characters in label values, OpenTSDB limits them to a to z, A to Z, 0 to 9, -, _, . and /. Currently any illegal characters in Prometheus label values are simply replaced by an underscore. Especially when integrating OpenTSDB with the read path in Prometheus, we'll need to reconsider this: either we'll need to introduce the same limitations for Prometheus labels or escape/encode illegal characters in OpenTSDB in such a way that they are fully decodable again when reading through Prometheus, so that corresponding timeseries in both systems match in their labelsets. Change-Id: I8394c9c55dbac3946a0fa497f566d5e6e2d600b5
11 years ago
// These will be dropped because the queue is full.
for _, s := range samples[len(samples)/2:] {
m.Append(s)
}
Add optional sample replication to OpenTSDB. Prometheus needs long-term storage. Since we don't have enough resources to build our own timeseries storage from scratch ontop of Riak, Cassandra or a similar distributed datastore at the moment, we're planning on using OpenTSDB as long-term storage for Prometheus. It's data model is roughly compatible with that of Prometheus, with some caveats. As a first step, this adds write-only replication from Prometheus to OpenTSDB, with the following things worth noting: 1) I tried to keep the integration lightweight, meaning that anything related to OpenTSDB is isolated to its own package and only main knows about it (essentially it tees all samples to both the existing storage and TSDB). It's not touching the existing TieredStorage at all to avoid more complexity in that area. This might change in the future, especially if we decide to implement a read path for OpenTSDB through Prometheus as well. 2) Backpressure while sending to OpenTSDB is handled by simply dropping samples on the floor when the in-memory queue of samples destined for OpenTSDB runs full. Prometheus also only attempts to send samples once, rather than implementing a complex retry algorithm. Thus, replication to OpenTSDB is best-effort for now. If needed, this may be extended in the future. 3) Samples are sent in batches of limited size to OpenTSDB. The optimal batch size, timeout parameters, etc. may need to be adjusted in the future. 4) OpenTSDB has different rules for legal characters in tag (label) values. While Prometheus allows any characters in label values, OpenTSDB limits them to a to z, A to Z, 0 to 9, -, _, . and /. Currently any illegal characters in Prometheus label values are simply replaced by an underscore. Especially when integrating OpenTSDB with the read path in Prometheus, we'll need to reconsider this: either we'll need to introduce the same limitations for Prometheus labels or escape/encode illegal characters in OpenTSDB in such a way that they are fully decodable again when reading through Prometheus, so that corresponding timeseries in both systems match in their labelsets. Change-Id: I8394c9c55dbac3946a0fa497f566d5e6e2d600b5
11 years ago
go m.Run()
defer m.Stop()
Add optional sample replication to OpenTSDB. Prometheus needs long-term storage. Since we don't have enough resources to build our own timeseries storage from scratch ontop of Riak, Cassandra or a similar distributed datastore at the moment, we're planning on using OpenTSDB as long-term storage for Prometheus. It's data model is roughly compatible with that of Prometheus, with some caveats. As a first step, this adds write-only replication from Prometheus to OpenTSDB, with the following things worth noting: 1) I tried to keep the integration lightweight, meaning that anything related to OpenTSDB is isolated to its own package and only main knows about it (essentially it tees all samples to both the existing storage and TSDB). It's not touching the existing TieredStorage at all to avoid more complexity in that area. This might change in the future, especially if we decide to implement a read path for OpenTSDB through Prometheus as well. 2) Backpressure while sending to OpenTSDB is handled by simply dropping samples on the floor when the in-memory queue of samples destined for OpenTSDB runs full. Prometheus also only attempts to send samples once, rather than implementing a complex retry algorithm. Thus, replication to OpenTSDB is best-effort for now. If needed, this may be extended in the future. 3) Samples are sent in batches of limited size to OpenTSDB. The optimal batch size, timeout parameters, etc. may need to be adjusted in the future. 4) OpenTSDB has different rules for legal characters in tag (label) values. While Prometheus allows any characters in label values, OpenTSDB limits them to a to z, A to Z, 0 to 9, -, _, . and /. Currently any illegal characters in Prometheus label values are simply replaced by an underscore. Especially when integrating OpenTSDB with the read path in Prometheus, we'll need to reconsider this: either we'll need to introduce the same limitations for Prometheus labels or escape/encode illegal characters in OpenTSDB in such a way that they are fully decodable again when reading through Prometheus, so that corresponding timeseries in both systems match in their labelsets. Change-Id: I8394c9c55dbac3946a0fa497f566d5e6e2d600b5
11 years ago
c.waitForExpectedSamples(t)
}
func TestSampleDeliveryOrder(t *testing.T) {
cfg := defaultConfig
ts := 10
n := cfg.MaxSamplesPerSend * ts
// Ensure we don't drop samples in this test.
cfg.QueueCapacity = n
samples := make(model.Samples, 0, n)
for i := 0; i < n; i++ {
name := model.LabelValue(fmt.Sprintf("test_metric_%d", i%ts))
samples = append(samples, &model.Sample{
Metric: model.Metric{
model.MetricNameLabel: name,
},
Value: model.SampleValue(i),
Timestamp: model.Time(i),
})
}
c := NewTestStorageClient()
c.expectSamples(samples)
m := NewStorageQueueManager(c, &cfg)
// These should be received by the client.
for _, s := range samples {
m.Append(s)
}
go m.Run()
defer m.Stop()
c.waitForExpectedSamples(t)
}
// TestBlockingStorageClient is a queue_manager StorageClient which will block
// on any calls to Store(), until the `block` channel is closed, at which point
// the `numCalls` property will contain a count of how many times Store() was
// called.
type TestBlockingStorageClient struct {
block chan bool
numCalls uint64
}
func NewTestBlockedStorageClient() *TestBlockingStorageClient {
return &TestBlockingStorageClient{
block: make(chan bool),
numCalls: 0,
}
}
func (c *TestBlockingStorageClient) Store(s model.Samples) error {
atomic.AddUint64(&c.numCalls, 1)
<-c.block
return nil
}
func (c *TestBlockingStorageClient) NumCalls() uint64 {
return atomic.LoadUint64(&c.numCalls)
}
func (c *TestBlockingStorageClient) unlock() {
close(c.block)
}
func (c *TestBlockingStorageClient) Name() string {
return "testblockingstorageclient"
}
func TestSpawnNotMoreThanMaxConcurrentSendsGoroutines(t *testing.T) {
// Our goal is to fully empty the queue:
// `MaxSamplesPerSend*Shards` samples should be consumed by the
// per-shard goroutines, and then another `MaxSamplesPerSend`
// should be left on the queue.
cfg := defaultConfig
n := cfg.MaxSamplesPerSend*cfg.Shards + cfg.MaxSamplesPerSend
cfg.QueueCapacity = n
samples := make(model.Samples, 0, n)
for i := 0; i < n; i++ {
name := model.LabelValue(fmt.Sprintf("test_metric_%d", i))
samples = append(samples, &model.Sample{
Metric: model.Metric{
model.MetricNameLabel: name,
},
Value: model.SampleValue(i),
})
}
c := NewTestBlockedStorageClient()
m := NewStorageQueueManager(c, &cfg)
go m.Run()
defer func() {
c.unlock()
m.Stop()
}()
for _, s := range samples {
m.Append(s)
}
// Wait until the runShard() loops drain the queue. If things went right, it
// should then immediately block in sendSamples(), but, in case of error,
// it would spawn too many goroutines, and thus we'd see more calls to
// client.Store()
//
// The timed wait is maybe non-ideal, but, in order to verify that we're
// not spawning too many concurrent goroutines, we have to wait on the
// Run() loop to consume a specific number of elements from the
// queue... and it doesn't signal that in any obvious way, except by
// draining the queue. We cap the waiting at 1 second -- that should give
// plenty of time, and keeps the failure fairly quick if we're not draining
// the queue properly.
for i := 0; i < 100 && m.queueLen() > 0; i++ {
time.Sleep(10 * time.Millisecond)
}
if m.queueLen() != cfg.MaxSamplesPerSend {
t.Fatalf("Failed to drain StorageQueueManager queue, %d elements left",
m.queueLen(),
)
}
numCalls := c.NumCalls()
if numCalls != uint64(cfg.Shards) {
t.Errorf("Saw %d concurrent sends, expected %d", numCalls, cfg.Shards)
}
}