You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
prometheus/rules/alerting_test.go

1028 lines
26 KiB

// Copyright 2016 The Prometheus Authors
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package rules
import (
"context"
"errors"
"testing"
"time"
"github.com/go-kit/log"
"github.com/prometheus/common/model"
"github.com/stretchr/testify/require"
"github.com/prometheus/prometheus/model/histogram"
"github.com/prometheus/prometheus/model/labels"
"github.com/prometheus/prometheus/model/relabel"
"github.com/prometheus/prometheus/model/timestamp"
"github.com/prometheus/prometheus/notifier"
"github.com/prometheus/prometheus/promql"
"github.com/prometheus/prometheus/promql/parser"
Add SyncForState Implementation for Ruler HA (#10070) * continuously syncing activeAt for alerts Signed-off-by: Yijie Qin <qinyijie@amazon.com> Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * add import Signed-off-by: Yijie Qin <qinyijie@amazon.com> Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * Refactor SyncForState and add unit tests Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * Format code Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * Add hook for syncForState Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Fix go lint Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Refactor syncForState override implementation Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Add syncForState override func as argument to Update() Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Fix go formatting Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Fix circleci test errors Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Remove overrideFunc as argument to run() Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * remove the syncForState Signed-off-by: Yijie Qin <qinyijie@amazon.com> * use the override function to decide if need to replace the activeAt or not Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix test case Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix format Signed-off-by: Yijie Qin <qinyijie@amazon.com> * Trigger build Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fixing comments Signed-off-by: Yijie Qin <qinyijie@amazon.com> * return the result of map of alerts instead of single one Signed-off-by: Yijie Qin <qinyijie@amazon.com> * upper case the QueryforStateSeries Signed-off-by: Yijie Qin <qinyijie@amazon.com> * use a more generic rule group post process function type Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix indentation Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix gofmt Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix lint Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fixing naming Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix comments Signed-off-by: Yijie Qin <qinyijie@amazon.com> * add the lastEvalTimestamp as parameter Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fmt Signed-off-by: Yijie Qin <qinyijie@amazon.com> * change funcType to func Signed-off-by: Yijie Qin <qinyijie@amazon.com> Co-authored-by: Yijie Qin <qinyijie@amazon.com> Co-authored-by: Yijie Qin <63399121+qinxx108@users.noreply.github.com>
3 years ago
"github.com/prometheus/prometheus/storage"
"github.com/prometheus/prometheus/util/teststorage"
"github.com/prometheus/prometheus/util/testutil"
)
var testEngine = promql.NewEngine(promql.EngineOpts{
Logger: nil,
Reg: nil,
MaxSamples: 10000,
Timeout: 100 * time.Second,
NoStepSubqueryIntervalFn: func(int64) int64 { return 60 * 1000 },
EnableAtModifier: true,
EnableNegativeOffset: true,
EnablePerStepStats: true,
})
func TestAlertingRuleState(t *testing.T) {
tests := []struct {
name string
active map[uint64]*Alert
want AlertState
}{
{
name: "MaxStateFiring",
active: map[uint64]*Alert{
0: {State: StatePending},
1: {State: StateFiring},
},
want: StateFiring,
},
{
name: "MaxStatePending",
active: map[uint64]*Alert{
0: {State: StateInactive},
1: {State: StatePending},
},
want: StatePending,
},
{
name: "MaxStateInactive",
active: map[uint64]*Alert{
0: {State: StateInactive},
1: {State: StateInactive},
},
want: StateInactive,
},
}
for i, test := range tests {
rule := NewAlertingRule(test.name, nil, 0, 0, labels.EmptyLabels(), labels.EmptyLabels(), labels.EmptyLabels(), "", true, nil)
rule.active = test.active
got := rule.State()
require.Equal(t, test.want, got, "test case %d unexpected AlertState, want:%d got:%d", i, test.want, got)
}
}
func TestAlertingRuleTemplateWithHistogram(t *testing.T) {
h := histogram.FloatHistogram{
Schema: 0,
Count: 30,
Sum: 1111.1,
ZeroThreshold: 0.001,
ZeroCount: 2,
PositiveSpans: []histogram.Span{
{Offset: 0, Length: 1},
{Offset: 1, Length: 5},
},
PositiveBuckets: []float64{1, 1, 2, 1, 1, 1},
NegativeSpans: []histogram.Span{
{Offset: 1, Length: 4},
{Offset: 4, Length: 3},
},
NegativeBuckets: []float64{-2, 2, 2, 7, 5, 5, 2},
}
q := func(ctx context.Context, qs string, t time.Time) (promql.Vector, error) {
return []promql.Sample{{H: &h}}, nil
}
expr, err := parser.ParseExpr("foo")
require.NoError(t, err)
rule := NewAlertingRule(
"HistogramAsValue",
expr,
time.Minute,
0,
labels.FromStrings("histogram", "{{ $value }}"),
labels.EmptyLabels(), labels.EmptyLabels(), "", true, nil,
)
evalTime := time.Now()
res, err := rule.Eval(context.TODO(), evalTime, q, nil, 0)
require.NoError(t, err)
require.Len(t, res, 2)
for _, smpl := range res {
smplName := smpl.Metric.Get("__name__")
if smplName == "ALERTS" {
result := promql.Sample{
Metric: labels.FromStrings(
"__name__", "ALERTS",
"alertname", "HistogramAsValue",
"alertstate", "pending",
"histogram", h.String(),
),
T: timestamp.FromTime(evalTime),
F: 1,
}
testutil.RequireEqual(t, result, smpl)
} else {
// If not 'ALERTS', it has to be 'ALERTS_FOR_STATE'.
require.Equal(t, "ALERTS_FOR_STATE", smplName)
}
}
}
func TestAlertingRuleLabelsUpdate(t *testing.T) {
storage := promql.LoadedStorage(t, `
load 1m
http_requests{job="app-server", instance="0"} 75 85 70 70 stale
`)
t.Cleanup(func() { storage.Close() })
expr, err := parser.ParseExpr(`http_requests < 100`)
require.NoError(t, err)
rule := NewAlertingRule(
"HTTPRequestRateLow",
expr,
time.Minute,
0,
// Basing alerting rule labels off of a value that can change is a very bad idea.
// If an alert is going back and forth between two label values it will never fire.
// Instead, you should write two alerts with constant labels.
labels.FromStrings("severity", "{{ if lt $value 80.0 }}critical{{ else }}warning{{ end }}"),
labels.EmptyLabels(), labels.EmptyLabels(), "", true, nil,
)
results := []promql.Vector{
{
promql.Sample{
Metric: labels.FromStrings(
"__name__", "ALERTS",
"alertname", "HTTPRequestRateLow",
"alertstate", "pending",
"instance", "0",
"job", "app-server",
"severity", "critical",
),
promql: Separate `Point` into `FPoint` and `HPoint` In other words: Instead of having a “polymorphous” `Point` that can either contain a float value or a histogram value, use an `FPoint` for floats and an `HPoint` for histograms. This seemingly small change has a _lot_ of repercussions throughout the codebase. The idea here is to avoid the increase in size of `Point` arrays that happened after native histograms had been added. The higher-level data structures (`Sample`, `Series`, etc.) are still “polymorphous”. The same idea could be applied to them, but at each step the trade-offs needed to be evaluated. The idea with this change is to do the minimum necessary to get back to pre-histogram performance for functions that do not touch histograms. Here are comparisons for the `changes` function. The test data doesn't include histograms yet. Ideally, there would be no change in the benchmark result at all. First runtime v2.39 compared to directly prior to this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10) ``` And then runtime v2.39 compared to after this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9) ``` In summary, the runtime doesn't really improve with this change for queries with just a few steps. For queries with many steps, this commit essentially reinstates the old performance. This is good because the many-step queries are the one that matter most (longest absolute runtime). In terms of allocations, though, this commit doesn't make a dent at all (numbers not shown). The reason is that most of the allocations happen in the sampleRingIterator (in the storage package), which has to be addressed in a separate commit. Signed-off-by: beorn7 <beorn@grafana.com>
2 years ago
F: 1,
},
},
{
promql.Sample{
Metric: labels.FromStrings(
"__name__", "ALERTS",
"alertname", "HTTPRequestRateLow",
"alertstate", "pending",
"instance", "0",
"job", "app-server",
"severity", "warning",
),
promql: Separate `Point` into `FPoint` and `HPoint` In other words: Instead of having a “polymorphous” `Point` that can either contain a float value or a histogram value, use an `FPoint` for floats and an `HPoint` for histograms. This seemingly small change has a _lot_ of repercussions throughout the codebase. The idea here is to avoid the increase in size of `Point` arrays that happened after native histograms had been added. The higher-level data structures (`Sample`, `Series`, etc.) are still “polymorphous”. The same idea could be applied to them, but at each step the trade-offs needed to be evaluated. The idea with this change is to do the minimum necessary to get back to pre-histogram performance for functions that do not touch histograms. Here are comparisons for the `changes` function. The test data doesn't include histograms yet. Ideally, there would be no change in the benchmark result at all. First runtime v2.39 compared to directly prior to this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10) ``` And then runtime v2.39 compared to after this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9) ``` In summary, the runtime doesn't really improve with this change for queries with just a few steps. For queries with many steps, this commit essentially reinstates the old performance. This is good because the many-step queries are the one that matter most (longest absolute runtime). In terms of allocations, though, this commit doesn't make a dent at all (numbers not shown). The reason is that most of the allocations happen in the sampleRingIterator (in the storage package), which has to be addressed in a separate commit. Signed-off-by: beorn7 <beorn@grafana.com>
2 years ago
F: 1,
},
},
{
promql.Sample{
Metric: labels.FromStrings(
"__name__", "ALERTS",
"alertname", "HTTPRequestRateLow",
"alertstate", "pending",
"instance", "0",
"job", "app-server",
"severity", "critical",
),
promql: Separate `Point` into `FPoint` and `HPoint` In other words: Instead of having a “polymorphous” `Point` that can either contain a float value or a histogram value, use an `FPoint` for floats and an `HPoint` for histograms. This seemingly small change has a _lot_ of repercussions throughout the codebase. The idea here is to avoid the increase in size of `Point` arrays that happened after native histograms had been added. The higher-level data structures (`Sample`, `Series`, etc.) are still “polymorphous”. The same idea could be applied to them, but at each step the trade-offs needed to be evaluated. The idea with this change is to do the minimum necessary to get back to pre-histogram performance for functions that do not touch histograms. Here are comparisons for the `changes` function. The test data doesn't include histograms yet. Ideally, there would be no change in the benchmark result at all. First runtime v2.39 compared to directly prior to this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10) ``` And then runtime v2.39 compared to after this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9) ``` In summary, the runtime doesn't really improve with this change for queries with just a few steps. For queries with many steps, this commit essentially reinstates the old performance. This is good because the many-step queries are the one that matter most (longest absolute runtime). In terms of allocations, though, this commit doesn't make a dent at all (numbers not shown). The reason is that most of the allocations happen in the sampleRingIterator (in the storage package), which has to be addressed in a separate commit. Signed-off-by: beorn7 <beorn@grafana.com>
2 years ago
F: 1,
},
},
{
promql.Sample{
Metric: labels.FromStrings(
"__name__", "ALERTS",
"alertname", "HTTPRequestRateLow",
"alertstate", "firing",
"instance", "0",
"job", "app-server",
"severity", "critical",
),
promql: Separate `Point` into `FPoint` and `HPoint` In other words: Instead of having a “polymorphous” `Point` that can either contain a float value or a histogram value, use an `FPoint` for floats and an `HPoint` for histograms. This seemingly small change has a _lot_ of repercussions throughout the codebase. The idea here is to avoid the increase in size of `Point` arrays that happened after native histograms had been added. The higher-level data structures (`Sample`, `Series`, etc.) are still “polymorphous”. The same idea could be applied to them, but at each step the trade-offs needed to be evaluated. The idea with this change is to do the minimum necessary to get back to pre-histogram performance for functions that do not touch histograms. Here are comparisons for the `changes` function. The test data doesn't include histograms yet. Ideally, there would be no change in the benchmark result at all. First runtime v2.39 compared to directly prior to this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10) ``` And then runtime v2.39 compared to after this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9) ``` In summary, the runtime doesn't really improve with this change for queries with just a few steps. For queries with many steps, this commit essentially reinstates the old performance. This is good because the many-step queries are the one that matter most (longest absolute runtime). In terms of allocations, though, this commit doesn't make a dent at all (numbers not shown). The reason is that most of the allocations happen in the sampleRingIterator (in the storage package), which has to be addressed in a separate commit. Signed-off-by: beorn7 <beorn@grafana.com>
2 years ago
F: 1,
},
},
}
baseTime := time.Unix(0, 0)
for i, result := range results {
t.Logf("case %d", i)
evalTime := baseTime.Add(time.Duration(i) * time.Minute)
promql: Separate `Point` into `FPoint` and `HPoint` In other words: Instead of having a “polymorphous” `Point` that can either contain a float value or a histogram value, use an `FPoint` for floats and an `HPoint` for histograms. This seemingly small change has a _lot_ of repercussions throughout the codebase. The idea here is to avoid the increase in size of `Point` arrays that happened after native histograms had been added. The higher-level data structures (`Sample`, `Series`, etc.) are still “polymorphous”. The same idea could be applied to them, but at each step the trade-offs needed to be evaluated. The idea with this change is to do the minimum necessary to get back to pre-histogram performance for functions that do not touch histograms. Here are comparisons for the `changes` function. The test data doesn't include histograms yet. Ideally, there would be no change in the benchmark result at all. First runtime v2.39 compared to directly prior to this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10) ``` And then runtime v2.39 compared to after this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9) ``` In summary, the runtime doesn't really improve with this change for queries with just a few steps. For queries with many steps, this commit essentially reinstates the old performance. This is good because the many-step queries are the one that matter most (longest absolute runtime). In terms of allocations, though, this commit doesn't make a dent at all (numbers not shown). The reason is that most of the allocations happen in the sampleRingIterator (in the storage package), which has to be addressed in a separate commit. Signed-off-by: beorn7 <beorn@grafana.com>
2 years ago
result[0].T = timestamp.FromTime(evalTime)
res, err := rule.Eval(context.TODO(), evalTime, EngineQueryFunc(testEngine, storage), nil, 0)
require.NoError(t, err)
var filteredRes promql.Vector // After removing 'ALERTS_FOR_STATE' samples.
for _, smpl := range res {
smplName := smpl.Metric.Get("__name__")
if smplName == "ALERTS" {
filteredRes = append(filteredRes, smpl)
} else {
// If not 'ALERTS', it has to be 'ALERTS_FOR_STATE'.
require.Equal(t, "ALERTS_FOR_STATE", smplName)
}
}
testutil.RequireEqual(t, result, filteredRes)
}
evalTime := baseTime.Add(time.Duration(len(results)) * time.Minute)
res, err := rule.Eval(context.TODO(), evalTime, EngineQueryFunc(testEngine, storage), nil, 0)
require.NoError(t, err)
require.Empty(t, res)
}
func TestAlertingRuleExternalLabelsInTemplate(t *testing.T) {
storage := promql.LoadedStorage(t, `
load 1m
http_requests{job="app-server", instance="0"} 75 85 70 70
`)
t.Cleanup(func() { storage.Close() })
expr, err := parser.ParseExpr(`http_requests < 100`)
require.NoError(t, err)
ruleWithoutExternalLabels := NewAlertingRule(
"ExternalLabelDoesNotExist",
expr,
time.Minute,
0,
labels.FromStrings("templated_label", "There are {{ len $externalLabels }} external Labels, of which foo is {{ $externalLabels.foo }}."),
labels.EmptyLabels(),
labels.EmptyLabels(),
"",
true, log.NewNopLogger(),
)
ruleWithExternalLabels := NewAlertingRule(
"ExternalLabelExists",
expr,
time.Minute,
0,
labels.FromStrings("templated_label", "There are {{ len $externalLabels }} external Labels, of which foo is {{ $externalLabels.foo }}."),
labels.EmptyLabels(),
labels.FromStrings("foo", "bar", "dings", "bums"),
"",
true, log.NewNopLogger(),
)
result := promql.Vector{
promql.Sample{
Metric: labels.FromStrings(
"__name__", "ALERTS",
"alertname", "ExternalLabelDoesNotExist",
"alertstate", "pending",
"instance", "0",
"job", "app-server",
"templated_label", "There are 0 external Labels, of which foo is .",
),
promql: Separate `Point` into `FPoint` and `HPoint` In other words: Instead of having a “polymorphous” `Point` that can either contain a float value or a histogram value, use an `FPoint` for floats and an `HPoint` for histograms. This seemingly small change has a _lot_ of repercussions throughout the codebase. The idea here is to avoid the increase in size of `Point` arrays that happened after native histograms had been added. The higher-level data structures (`Sample`, `Series`, etc.) are still “polymorphous”. The same idea could be applied to them, but at each step the trade-offs needed to be evaluated. The idea with this change is to do the minimum necessary to get back to pre-histogram performance for functions that do not touch histograms. Here are comparisons for the `changes` function. The test data doesn't include histograms yet. Ideally, there would be no change in the benchmark result at all. First runtime v2.39 compared to directly prior to this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10) ``` And then runtime v2.39 compared to after this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9) ``` In summary, the runtime doesn't really improve with this change for queries with just a few steps. For queries with many steps, this commit essentially reinstates the old performance. This is good because the many-step queries are the one that matter most (longest absolute runtime). In terms of allocations, though, this commit doesn't make a dent at all (numbers not shown). The reason is that most of the allocations happen in the sampleRingIterator (in the storage package), which has to be addressed in a separate commit. Signed-off-by: beorn7 <beorn@grafana.com>
2 years ago
F: 1,
},
promql.Sample{
Metric: labels.FromStrings(
"__name__", "ALERTS",
"alertname", "ExternalLabelExists",
"alertstate", "pending",
"instance", "0",
"job", "app-server",
"templated_label", "There are 2 external Labels, of which foo is bar.",
),
promql: Separate `Point` into `FPoint` and `HPoint` In other words: Instead of having a “polymorphous” `Point` that can either contain a float value or a histogram value, use an `FPoint` for floats and an `HPoint` for histograms. This seemingly small change has a _lot_ of repercussions throughout the codebase. The idea here is to avoid the increase in size of `Point` arrays that happened after native histograms had been added. The higher-level data structures (`Sample`, `Series`, etc.) are still “polymorphous”. The same idea could be applied to them, but at each step the trade-offs needed to be evaluated. The idea with this change is to do the minimum necessary to get back to pre-histogram performance for functions that do not touch histograms. Here are comparisons for the `changes` function. The test data doesn't include histograms yet. Ideally, there would be no change in the benchmark result at all. First runtime v2.39 compared to directly prior to this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10) ``` And then runtime v2.39 compared to after this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9) ``` In summary, the runtime doesn't really improve with this change for queries with just a few steps. For queries with many steps, this commit essentially reinstates the old performance. This is good because the many-step queries are the one that matter most (longest absolute runtime). In terms of allocations, though, this commit doesn't make a dent at all (numbers not shown). The reason is that most of the allocations happen in the sampleRingIterator (in the storage package), which has to be addressed in a separate commit. Signed-off-by: beorn7 <beorn@grafana.com>
2 years ago
F: 1,
},
}
evalTime := time.Unix(0, 0)
promql: Separate `Point` into `FPoint` and `HPoint` In other words: Instead of having a “polymorphous” `Point` that can either contain a float value or a histogram value, use an `FPoint` for floats and an `HPoint` for histograms. This seemingly small change has a _lot_ of repercussions throughout the codebase. The idea here is to avoid the increase in size of `Point` arrays that happened after native histograms had been added. The higher-level data structures (`Sample`, `Series`, etc.) are still “polymorphous”. The same idea could be applied to them, but at each step the trade-offs needed to be evaluated. The idea with this change is to do the minimum necessary to get back to pre-histogram performance for functions that do not touch histograms. Here are comparisons for the `changes` function. The test data doesn't include histograms yet. Ideally, there would be no change in the benchmark result at all. First runtime v2.39 compared to directly prior to this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10) ``` And then runtime v2.39 compared to after this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9) ``` In summary, the runtime doesn't really improve with this change for queries with just a few steps. For queries with many steps, this commit essentially reinstates the old performance. This is good because the many-step queries are the one that matter most (longest absolute runtime). In terms of allocations, though, this commit doesn't make a dent at all (numbers not shown). The reason is that most of the allocations happen in the sampleRingIterator (in the storage package), which has to be addressed in a separate commit. Signed-off-by: beorn7 <beorn@grafana.com>
2 years ago
result[0].T = timestamp.FromTime(evalTime)
result[1].T = timestamp.FromTime(evalTime)
var filteredRes promql.Vector // After removing 'ALERTS_FOR_STATE' samples.
res, err := ruleWithoutExternalLabels.Eval(
context.TODO(), evalTime, EngineQueryFunc(testEngine, storage), nil, 0,
)
require.NoError(t, err)
for _, smpl := range res {
smplName := smpl.Metric.Get("__name__")
if smplName == "ALERTS" {
filteredRes = append(filteredRes, smpl)
} else {
// If not 'ALERTS', it has to be 'ALERTS_FOR_STATE'.
require.Equal(t, "ALERTS_FOR_STATE", smplName)
}
}
res, err = ruleWithExternalLabels.Eval(
context.TODO(), evalTime, EngineQueryFunc(testEngine, storage), nil, 0,
)
require.NoError(t, err)
for _, smpl := range res {
smplName := smpl.Metric.Get("__name__")
if smplName == "ALERTS" {
filteredRes = append(filteredRes, smpl)
} else {
// If not 'ALERTS', it has to be 'ALERTS_FOR_STATE'.
require.Equal(t, "ALERTS_FOR_STATE", smplName)
}
}
testutil.RequireEqual(t, result, filteredRes)
}
func TestAlertingRuleExternalURLInTemplate(t *testing.T) {
storage := promql.LoadedStorage(t, `
load 1m
http_requests{job="app-server", instance="0"} 75 85 70 70
`)
t.Cleanup(func() { storage.Close() })
expr, err := parser.ParseExpr(`http_requests < 100`)
require.NoError(t, err)
ruleWithoutExternalURL := NewAlertingRule(
"ExternalURLDoesNotExist",
expr,
time.Minute,
0,
labels.FromStrings("templated_label", "The external URL is {{ $externalURL }}."),
labels.EmptyLabels(),
labels.EmptyLabels(),
"",
true, log.NewNopLogger(),
)
ruleWithExternalURL := NewAlertingRule(
"ExternalURLExists",
expr,
time.Minute,
0,
labels.FromStrings("templated_label", "The external URL is {{ $externalURL }}."),
labels.EmptyLabels(),
labels.EmptyLabels(),
"http://localhost:1234",
true, log.NewNopLogger(),
)
result := promql.Vector{
promql.Sample{
Metric: labels.FromStrings(
"__name__", "ALERTS",
"alertname", "ExternalURLDoesNotExist",
"alertstate", "pending",
"instance", "0",
"job", "app-server",
"templated_label", "The external URL is .",
),
promql: Separate `Point` into `FPoint` and `HPoint` In other words: Instead of having a “polymorphous” `Point` that can either contain a float value or a histogram value, use an `FPoint` for floats and an `HPoint` for histograms. This seemingly small change has a _lot_ of repercussions throughout the codebase. The idea here is to avoid the increase in size of `Point` arrays that happened after native histograms had been added. The higher-level data structures (`Sample`, `Series`, etc.) are still “polymorphous”. The same idea could be applied to them, but at each step the trade-offs needed to be evaluated. The idea with this change is to do the minimum necessary to get back to pre-histogram performance for functions that do not touch histograms. Here are comparisons for the `changes` function. The test data doesn't include histograms yet. Ideally, there would be no change in the benchmark result at all. First runtime v2.39 compared to directly prior to this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10) ``` And then runtime v2.39 compared to after this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9) ``` In summary, the runtime doesn't really improve with this change for queries with just a few steps. For queries with many steps, this commit essentially reinstates the old performance. This is good because the many-step queries are the one that matter most (longest absolute runtime). In terms of allocations, though, this commit doesn't make a dent at all (numbers not shown). The reason is that most of the allocations happen in the sampleRingIterator (in the storage package), which has to be addressed in a separate commit. Signed-off-by: beorn7 <beorn@grafana.com>
2 years ago
F: 1,
},
promql.Sample{
Metric: labels.FromStrings(
"__name__", "ALERTS",
"alertname", "ExternalURLExists",
"alertstate", "pending",
"instance", "0",
"job", "app-server",
"templated_label", "The external URL is http://localhost:1234.",
),
promql: Separate `Point` into `FPoint` and `HPoint` In other words: Instead of having a “polymorphous” `Point` that can either contain a float value or a histogram value, use an `FPoint` for floats and an `HPoint` for histograms. This seemingly small change has a _lot_ of repercussions throughout the codebase. The idea here is to avoid the increase in size of `Point` arrays that happened after native histograms had been added. The higher-level data structures (`Sample`, `Series`, etc.) are still “polymorphous”. The same idea could be applied to them, but at each step the trade-offs needed to be evaluated. The idea with this change is to do the minimum necessary to get back to pre-histogram performance for functions that do not touch histograms. Here are comparisons for the `changes` function. The test data doesn't include histograms yet. Ideally, there would be no change in the benchmark result at all. First runtime v2.39 compared to directly prior to this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10) ``` And then runtime v2.39 compared to after this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9) ``` In summary, the runtime doesn't really improve with this change for queries with just a few steps. For queries with many steps, this commit essentially reinstates the old performance. This is good because the many-step queries are the one that matter most (longest absolute runtime). In terms of allocations, though, this commit doesn't make a dent at all (numbers not shown). The reason is that most of the allocations happen in the sampleRingIterator (in the storage package), which has to be addressed in a separate commit. Signed-off-by: beorn7 <beorn@grafana.com>
2 years ago
F: 1,
},
}
evalTime := time.Unix(0, 0)
promql: Separate `Point` into `FPoint` and `HPoint` In other words: Instead of having a “polymorphous” `Point` that can either contain a float value or a histogram value, use an `FPoint` for floats and an `HPoint` for histograms. This seemingly small change has a _lot_ of repercussions throughout the codebase. The idea here is to avoid the increase in size of `Point` arrays that happened after native histograms had been added. The higher-level data structures (`Sample`, `Series`, etc.) are still “polymorphous”. The same idea could be applied to them, but at each step the trade-offs needed to be evaluated. The idea with this change is to do the minimum necessary to get back to pre-histogram performance for functions that do not touch histograms. Here are comparisons for the `changes` function. The test data doesn't include histograms yet. Ideally, there would be no change in the benchmark result at all. First runtime v2.39 compared to directly prior to this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10) ``` And then runtime v2.39 compared to after this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9) ``` In summary, the runtime doesn't really improve with this change for queries with just a few steps. For queries with many steps, this commit essentially reinstates the old performance. This is good because the many-step queries are the one that matter most (longest absolute runtime). In terms of allocations, though, this commit doesn't make a dent at all (numbers not shown). The reason is that most of the allocations happen in the sampleRingIterator (in the storage package), which has to be addressed in a separate commit. Signed-off-by: beorn7 <beorn@grafana.com>
2 years ago
result[0].T = timestamp.FromTime(evalTime)
result[1].T = timestamp.FromTime(evalTime)
var filteredRes promql.Vector // After removing 'ALERTS_FOR_STATE' samples.
res, err := ruleWithoutExternalURL.Eval(
context.TODO(), evalTime, EngineQueryFunc(testEngine, storage), nil, 0,
)
require.NoError(t, err)
for _, smpl := range res {
smplName := smpl.Metric.Get("__name__")
if smplName == "ALERTS" {
filteredRes = append(filteredRes, smpl)
} else {
// If not 'ALERTS', it has to be 'ALERTS_FOR_STATE'.
require.Equal(t, "ALERTS_FOR_STATE", smplName)
}
}
res, err = ruleWithExternalURL.Eval(
context.TODO(), evalTime, EngineQueryFunc(testEngine, storage), nil, 0,
)
require.NoError(t, err)
for _, smpl := range res {
smplName := smpl.Metric.Get("__name__")
if smplName == "ALERTS" {
filteredRes = append(filteredRes, smpl)
} else {
// If not 'ALERTS', it has to be 'ALERTS_FOR_STATE'.
require.Equal(t, "ALERTS_FOR_STATE", smplName)
}
}
testutil.RequireEqual(t, result, filteredRes)
}
func TestAlertingRuleEmptyLabelFromTemplate(t *testing.T) {
storage := promql.LoadedStorage(t, `
load 1m
http_requests{job="app-server", instance="0"} 75 85 70 70
`)
t.Cleanup(func() { storage.Close() })
expr, err := parser.ParseExpr(`http_requests < 100`)
require.NoError(t, err)
rule := NewAlertingRule(
"EmptyLabel",
expr,
time.Minute,
0,
labels.FromStrings("empty_label", ""),
labels.EmptyLabels(),
labels.EmptyLabels(),
"",
true, log.NewNopLogger(),
)
result := promql.Vector{
promql.Sample{
Metric: labels.FromStrings(
"__name__", "ALERTS",
"alertname", "EmptyLabel",
"alertstate", "pending",
"instance", "0",
"job", "app-server",
),
promql: Separate `Point` into `FPoint` and `HPoint` In other words: Instead of having a “polymorphous” `Point` that can either contain a float value or a histogram value, use an `FPoint` for floats and an `HPoint` for histograms. This seemingly small change has a _lot_ of repercussions throughout the codebase. The idea here is to avoid the increase in size of `Point` arrays that happened after native histograms had been added. The higher-level data structures (`Sample`, `Series`, etc.) are still “polymorphous”. The same idea could be applied to them, but at each step the trade-offs needed to be evaluated. The idea with this change is to do the minimum necessary to get back to pre-histogram performance for functions that do not touch histograms. Here are comparisons for the `changes` function. The test data doesn't include histograms yet. Ideally, there would be no change in the benchmark result at all. First runtime v2.39 compared to directly prior to this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10) ``` And then runtime v2.39 compared to after this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9) ``` In summary, the runtime doesn't really improve with this change for queries with just a few steps. For queries with many steps, this commit essentially reinstates the old performance. This is good because the many-step queries are the one that matter most (longest absolute runtime). In terms of allocations, though, this commit doesn't make a dent at all (numbers not shown). The reason is that most of the allocations happen in the sampleRingIterator (in the storage package), which has to be addressed in a separate commit. Signed-off-by: beorn7 <beorn@grafana.com>
2 years ago
F: 1,
},
}
evalTime := time.Unix(0, 0)
promql: Separate `Point` into `FPoint` and `HPoint` In other words: Instead of having a “polymorphous” `Point` that can either contain a float value or a histogram value, use an `FPoint` for floats and an `HPoint` for histograms. This seemingly small change has a _lot_ of repercussions throughout the codebase. The idea here is to avoid the increase in size of `Point` arrays that happened after native histograms had been added. The higher-level data structures (`Sample`, `Series`, etc.) are still “polymorphous”. The same idea could be applied to them, but at each step the trade-offs needed to be evaluated. The idea with this change is to do the minimum necessary to get back to pre-histogram performance for functions that do not touch histograms. Here are comparisons for the `changes` function. The test data doesn't include histograms yet. Ideally, there would be no change in the benchmark result at all. First runtime v2.39 compared to directly prior to this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10) ``` And then runtime v2.39 compared to after this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9) ``` In summary, the runtime doesn't really improve with this change for queries with just a few steps. For queries with many steps, this commit essentially reinstates the old performance. This is good because the many-step queries are the one that matter most (longest absolute runtime). In terms of allocations, though, this commit doesn't make a dent at all (numbers not shown). The reason is that most of the allocations happen in the sampleRingIterator (in the storage package), which has to be addressed in a separate commit. Signed-off-by: beorn7 <beorn@grafana.com>
2 years ago
result[0].T = timestamp.FromTime(evalTime)
var filteredRes promql.Vector // After removing 'ALERTS_FOR_STATE' samples.
res, err := rule.Eval(
context.TODO(), evalTime, EngineQueryFunc(testEngine, storage), nil, 0,
)
require.NoError(t, err)
for _, smpl := range res {
smplName := smpl.Metric.Get("__name__")
if smplName == "ALERTS" {
filteredRes = append(filteredRes, smpl)
} else {
// If not 'ALERTS', it has to be 'ALERTS_FOR_STATE'.
require.Equal(t, "ALERTS_FOR_STATE", smplName)
}
}
testutil.RequireEqual(t, result, filteredRes)
}
func TestAlertingRuleQueryInTemplate(t *testing.T) {
storage := promql.LoadedStorage(t, `
load 1m
http_requests{job="app-server", instance="0"} 70 85 70 70
`)
t.Cleanup(func() { storage.Close() })
expr, err := parser.ParseExpr(`sum(http_requests) < 100`)
require.NoError(t, err)
ruleWithQueryInTemplate := NewAlertingRule(
"ruleWithQueryInTemplate",
expr,
time.Minute,
0,
labels.FromStrings("label", "value"),
labels.FromStrings("templated_label", `{{- with "sort(sum(http_requests) by (instance))" | query -}}
{{- range $i,$v := . -}}
instance: {{ $v.Labels.instance }}, value: {{ printf "%.0f" $v.Value }};
{{- end -}}
{{- end -}}
`),
labels.EmptyLabels(),
"",
true, log.NewNopLogger(),
)
evalTime := time.Unix(0, 0)
startQueryCh := make(chan struct{})
getDoneCh := make(chan struct{})
slowQueryFunc := func(ctx context.Context, q string, ts time.Time) (promql.Vector, error) {
if q == "sort(sum(http_requests) by (instance))" {
// This is a minimum reproduction of issue 10703, expand template with query.
close(startQueryCh)
select {
case <-getDoneCh:
case <-time.After(time.Millisecond * 10):
// Assert no blocking when template expanding.
require.Fail(t, "unexpected blocking when template expanding.")
}
}
return EngineQueryFunc(testEngine, storage)(ctx, q, ts)
}
go func() {
<-startQueryCh
_ = ruleWithQueryInTemplate.Health()
_ = ruleWithQueryInTemplate.LastError()
_ = ruleWithQueryInTemplate.GetEvaluationDuration()
_ = ruleWithQueryInTemplate.GetEvaluationTimestamp()
close(getDoneCh)
}()
_, err = ruleWithQueryInTemplate.Eval(
context.TODO(), evalTime, slowQueryFunc, nil, 0,
)
require.NoError(t, err)
}
func BenchmarkAlertingRuleAtomicField(b *testing.B) {
b.ReportAllocs()
rule := NewAlertingRule("bench", nil, 0, 0, labels.EmptyLabels(), labels.EmptyLabels(), labels.EmptyLabels(), "", true, nil)
done := make(chan struct{})
go func() {
for i := 0; i < b.N; i++ {
rule.GetEvaluationTimestamp()
}
close(done)
}()
b.RunParallel(func(pb *testing.PB) {
for pb.Next() {
rule.SetEvaluationTimestamp(time.Now())
}
})
<-done
}
func TestAlertingRuleDuplicate(t *testing.T) {
storage := teststorage.New(t)
defer storage.Close()
opts := promql.EngineOpts{
Logger: nil,
Reg: nil,
MaxSamples: 10,
Timeout: 10 * time.Second,
}
engine := promql.NewEngine(opts)
ctx, cancelCtx := context.WithCancel(context.Background())
defer cancelCtx()
now := time.Now()
expr, _ := parser.ParseExpr(`vector(0) or label_replace(vector(0),"test","x","","")`)
rule := NewAlertingRule(
"foo",
expr,
time.Minute,
0,
labels.FromStrings("test", "test"),
labels.EmptyLabels(),
labels.EmptyLabels(),
"",
true, log.NewNopLogger(),
)
_, err := rule.Eval(ctx, now, EngineQueryFunc(engine, storage), nil, 0)
require.Error(t, err)
require.EqualError(t, err, "vector contains metrics with the same labelset after applying alert labels")
}
func TestAlertingRuleLimit(t *testing.T) {
storage := promql.LoadedStorage(t, `
load 1m
metric{label="1"} 1
metric{label="2"} 1
`)
t.Cleanup(func() { storage.Close() })
tests := []struct {
limit int
err string
}{
{
limit: 0,
},
{
limit: -1,
},
{
limit: 2,
},
{
limit: 1,
err: "exceeded limit of 1 with 2 alerts",
},
}
expr, _ := parser.ParseExpr(`metric > 0`)
rule := NewAlertingRule(
"foo",
expr,
time.Minute,
0,
labels.FromStrings("test", "test"),
labels.EmptyLabels(),
labels.EmptyLabels(),
"",
true, log.NewNopLogger(),
)
evalTime := time.Unix(0, 0)
for _, test := range tests {
switch _, err := rule.Eval(context.TODO(), evalTime, EngineQueryFunc(testEngine, storage), nil, test.limit); {
case err != nil:
require.EqualError(t, err, test.err)
case test.err != "":
t.Errorf("Expected errror %s, got none", test.err)
}
}
}
Add SyncForState Implementation for Ruler HA (#10070) * continuously syncing activeAt for alerts Signed-off-by: Yijie Qin <qinyijie@amazon.com> Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * add import Signed-off-by: Yijie Qin <qinyijie@amazon.com> Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * Refactor SyncForState and add unit tests Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * Format code Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * Add hook for syncForState Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Fix go lint Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Refactor syncForState override implementation Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Add syncForState override func as argument to Update() Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Fix go formatting Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Fix circleci test errors Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Remove overrideFunc as argument to run() Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * remove the syncForState Signed-off-by: Yijie Qin <qinyijie@amazon.com> * use the override function to decide if need to replace the activeAt or not Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix test case Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix format Signed-off-by: Yijie Qin <qinyijie@amazon.com> * Trigger build Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fixing comments Signed-off-by: Yijie Qin <qinyijie@amazon.com> * return the result of map of alerts instead of single one Signed-off-by: Yijie Qin <qinyijie@amazon.com> * upper case the QueryforStateSeries Signed-off-by: Yijie Qin <qinyijie@amazon.com> * use a more generic rule group post process function type Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix indentation Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix gofmt Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix lint Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fixing naming Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix comments Signed-off-by: Yijie Qin <qinyijie@amazon.com> * add the lastEvalTimestamp as parameter Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fmt Signed-off-by: Yijie Qin <qinyijie@amazon.com> * change funcType to func Signed-off-by: Yijie Qin <qinyijie@amazon.com> Co-authored-by: Yijie Qin <qinyijie@amazon.com> Co-authored-by: Yijie Qin <63399121+qinxx108@users.noreply.github.com>
3 years ago
func TestQueryForStateSeries(t *testing.T) {
testError := errors.New("test error")
type testInput struct {
selectMockFunction func(sortSeries bool, hints *storage.SelectHints, matchers ...*labels.Matcher) storage.SeriesSet
expectedSeries storage.Series
expectedError error
}
tests := []testInput{
// Test for empty series.
{
selectMockFunction: func(sortSeries bool, hints *storage.SelectHints, matchers ...*labels.Matcher) storage.SeriesSet {
return storage.EmptySeriesSet()
},
expectedSeries: nil,
expectedError: nil,
},
// Test for error series.
{
selectMockFunction: func(sortSeries bool, hints *storage.SelectHints, matchers ...*labels.Matcher) storage.SeriesSet {
return storage.ErrSeriesSet(testError)
},
expectedSeries: nil,
expectedError: testError,
},
// Test for mock series.
{
selectMockFunction: func(sortSeries bool, hints *storage.SelectHints, matchers ...*labels.Matcher) storage.SeriesSet {
return storage.TestSeriesSet(storage.MockSeries(
[]int64{1, 2, 3},
[]float64{1, 2, 3},
[]string{"__name__", "ALERTS_FOR_STATE", "alertname", "TestRule", "severity", "critical"},
))
},
expectedSeries: storage.MockSeries(
[]int64{1, 2, 3},
[]float64{1, 2, 3},
[]string{"__name__", "ALERTS_FOR_STATE", "alertname", "TestRule", "severity", "critical"},
),
expectedError: nil,
},
}
testFunc := func(tst testInput) {
querier := &storage.MockQuerier{
SelectMockFunction: tst.selectMockFunction,
}
rule := NewAlertingRule(
"TestRule",
nil,
time.Minute,
0,
Add SyncForState Implementation for Ruler HA (#10070) * continuously syncing activeAt for alerts Signed-off-by: Yijie Qin <qinyijie@amazon.com> Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * add import Signed-off-by: Yijie Qin <qinyijie@amazon.com> Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * Refactor SyncForState and add unit tests Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * Format code Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * Add hook for syncForState Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Fix go lint Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Refactor syncForState override implementation Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Add syncForState override func as argument to Update() Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Fix go formatting Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Fix circleci test errors Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Remove overrideFunc as argument to run() Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * remove the syncForState Signed-off-by: Yijie Qin <qinyijie@amazon.com> * use the override function to decide if need to replace the activeAt or not Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix test case Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix format Signed-off-by: Yijie Qin <qinyijie@amazon.com> * Trigger build Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fixing comments Signed-off-by: Yijie Qin <qinyijie@amazon.com> * return the result of map of alerts instead of single one Signed-off-by: Yijie Qin <qinyijie@amazon.com> * upper case the QueryforStateSeries Signed-off-by: Yijie Qin <qinyijie@amazon.com> * use a more generic rule group post process function type Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix indentation Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix gofmt Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix lint Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fixing naming Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix comments Signed-off-by: Yijie Qin <qinyijie@amazon.com> * add the lastEvalTimestamp as parameter Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fmt Signed-off-by: Yijie Qin <qinyijie@amazon.com> * change funcType to func Signed-off-by: Yijie Qin <qinyijie@amazon.com> Co-authored-by: Yijie Qin <qinyijie@amazon.com> Co-authored-by: Yijie Qin <63399121+qinxx108@users.noreply.github.com>
3 years ago
labels.FromStrings("severity", "critical"),
labels.EmptyLabels(), labels.EmptyLabels(), "", true, nil,
Add SyncForState Implementation for Ruler HA (#10070) * continuously syncing activeAt for alerts Signed-off-by: Yijie Qin <qinyijie@amazon.com> Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * add import Signed-off-by: Yijie Qin <qinyijie@amazon.com> Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * Refactor SyncForState and add unit tests Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * Format code Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * Add hook for syncForState Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Fix go lint Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Refactor syncForState override implementation Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Add syncForState override func as argument to Update() Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Fix go formatting Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Fix circleci test errors Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Remove overrideFunc as argument to run() Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * remove the syncForState Signed-off-by: Yijie Qin <qinyijie@amazon.com> * use the override function to decide if need to replace the activeAt or not Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix test case Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix format Signed-off-by: Yijie Qin <qinyijie@amazon.com> * Trigger build Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fixing comments Signed-off-by: Yijie Qin <qinyijie@amazon.com> * return the result of map of alerts instead of single one Signed-off-by: Yijie Qin <qinyijie@amazon.com> * upper case the QueryforStateSeries Signed-off-by: Yijie Qin <qinyijie@amazon.com> * use a more generic rule group post process function type Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix indentation Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix gofmt Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix lint Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fixing naming Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix comments Signed-off-by: Yijie Qin <qinyijie@amazon.com> * add the lastEvalTimestamp as parameter Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fmt Signed-off-by: Yijie Qin <qinyijie@amazon.com> * change funcType to func Signed-off-by: Yijie Qin <qinyijie@amazon.com> Co-authored-by: Yijie Qin <qinyijie@amazon.com> Co-authored-by: Yijie Qin <63399121+qinxx108@users.noreply.github.com>
3 years ago
)
alert := &Alert{
State: 0,
Labels: labels.EmptyLabels(),
Annotations: labels.EmptyLabels(),
Add SyncForState Implementation for Ruler HA (#10070) * continuously syncing activeAt for alerts Signed-off-by: Yijie Qin <qinyijie@amazon.com> Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * add import Signed-off-by: Yijie Qin <qinyijie@amazon.com> Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * Refactor SyncForState and add unit tests Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * Format code Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * Add hook for syncForState Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Fix go lint Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Refactor syncForState override implementation Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Add syncForState override func as argument to Update() Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Fix go formatting Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Fix circleci test errors Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Remove overrideFunc as argument to run() Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * remove the syncForState Signed-off-by: Yijie Qin <qinyijie@amazon.com> * use the override function to decide if need to replace the activeAt or not Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix test case Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix format Signed-off-by: Yijie Qin <qinyijie@amazon.com> * Trigger build Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fixing comments Signed-off-by: Yijie Qin <qinyijie@amazon.com> * return the result of map of alerts instead of single one Signed-off-by: Yijie Qin <qinyijie@amazon.com> * upper case the QueryforStateSeries Signed-off-by: Yijie Qin <qinyijie@amazon.com> * use a more generic rule group post process function type Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix indentation Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix gofmt Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix lint Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fixing naming Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix comments Signed-off-by: Yijie Qin <qinyijie@amazon.com> * add the lastEvalTimestamp as parameter Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fmt Signed-off-by: Yijie Qin <qinyijie@amazon.com> * change funcType to func Signed-off-by: Yijie Qin <qinyijie@amazon.com> Co-authored-by: Yijie Qin <qinyijie@amazon.com> Co-authored-by: Yijie Qin <63399121+qinxx108@users.noreply.github.com>
3 years ago
Value: 0,
ActiveAt: time.Time{},
FiredAt: time.Time{},
ResolvedAt: time.Time{},
LastSentAt: time.Time{},
ValidUntil: time.Time{},
}
series, err := rule.QueryforStateSeries(context.Background(), alert, querier)
Add SyncForState Implementation for Ruler HA (#10070) * continuously syncing activeAt for alerts Signed-off-by: Yijie Qin <qinyijie@amazon.com> Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * add import Signed-off-by: Yijie Qin <qinyijie@amazon.com> Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * Refactor SyncForState and add unit tests Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * Format code Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * Add hook for syncForState Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Fix go lint Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Refactor syncForState override implementation Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Add syncForState override func as argument to Update() Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Fix go formatting Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Fix circleci test errors Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> Remove overrideFunc as argument to run() Signed-off-by: Wilbert Guo <wilbeguo@amazon.com> * remove the syncForState Signed-off-by: Yijie Qin <qinyijie@amazon.com> * use the override function to decide if need to replace the activeAt or not Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix test case Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix format Signed-off-by: Yijie Qin <qinyijie@amazon.com> * Trigger build Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fixing comments Signed-off-by: Yijie Qin <qinyijie@amazon.com> * return the result of map of alerts instead of single one Signed-off-by: Yijie Qin <qinyijie@amazon.com> * upper case the QueryforStateSeries Signed-off-by: Yijie Qin <qinyijie@amazon.com> * use a more generic rule group post process function type Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix indentation Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix gofmt Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix lint Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fixing naming Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fix comments Signed-off-by: Yijie Qin <qinyijie@amazon.com> * add the lastEvalTimestamp as parameter Signed-off-by: Yijie Qin <qinyijie@amazon.com> * fmt Signed-off-by: Yijie Qin <qinyijie@amazon.com> * change funcType to func Signed-off-by: Yijie Qin <qinyijie@amazon.com> Co-authored-by: Yijie Qin <qinyijie@amazon.com> Co-authored-by: Yijie Qin <63399121+qinxx108@users.noreply.github.com>
3 years ago
require.Equal(t, tst.expectedSeries, series)
require.Equal(t, tst.expectedError, err)
}
for _, tst := range tests {
testFunc(tst)
}
}
// TestSendAlertsDontAffectActiveAlerts tests a fix for https://github.com/prometheus/prometheus/issues/11424.
func TestSendAlertsDontAffectActiveAlerts(t *testing.T) {
rule := NewAlertingRule(
"TestRule",
nil,
time.Minute,
0,
labels.FromStrings("severity", "critical"),
labels.EmptyLabels(), labels.EmptyLabels(), "", true, nil,
)
// Set an active alert.
lbls := labels.FromStrings("a1", "1")
h := lbls.Hash()
al := &Alert{State: StateFiring, Labels: lbls, ActiveAt: time.Now()}
rule.active[h] = al
expr, err := parser.ParseExpr("foo")
require.NoError(t, err)
rule.vector = expr
// The relabel rule reproduced the bug here.
opts := notifier.Options{
QueueCapacity: 1,
RelabelConfigs: []*relabel.Config{
{
SourceLabels: model.LabelNames{"a1"},
Regex: relabel.MustNewRegexp("(.+)"),
TargetLabel: "a1",
Replacement: "bug",
Action: "replace",
},
},
}
nm := notifier.NewManager(&opts, log.NewNopLogger())
f := SendAlerts(nm, "")
notifyFunc := func(ctx context.Context, expr string, alerts ...*Alert) {
require.Len(t, alerts, 1)
require.Equal(t, al, alerts[0])
f(ctx, expr, alerts...)
}
rule.sendAlerts(context.Background(), time.Now(), 0, 0, notifyFunc)
nm.Stop()
// The relabel rule changes a1=1 to a1=bug.
// But the labels with the AlertingRule should not be changed.
testutil.RequireEqual(t, labels.FromStrings("a1", "1"), rule.active[h].Labels)
}
func TestKeepFiringFor(t *testing.T) {
storage := promql.LoadedStorage(t, `
load 1m
http_requests{job="app-server", instance="0"} 75 85 70 70 10x5
`)
t.Cleanup(func() { storage.Close() })
expr, err := parser.ParseExpr(`http_requests > 50`)
require.NoError(t, err)
rule := NewAlertingRule(
"HTTPRequestRateHigh",
expr,
time.Minute,
time.Minute,
labels.EmptyLabels(),
labels.EmptyLabels(), labels.EmptyLabels(), "", true, nil,
)
results := []promql.Vector{
{
promql.Sample{
Metric: labels.FromStrings(
"__name__", "ALERTS",
"alertname", "HTTPRequestRateHigh",
"alertstate", "pending",
"instance", "0",
"job", "app-server",
),
promql: Separate `Point` into `FPoint` and `HPoint` In other words: Instead of having a “polymorphous” `Point` that can either contain a float value or a histogram value, use an `FPoint` for floats and an `HPoint` for histograms. This seemingly small change has a _lot_ of repercussions throughout the codebase. The idea here is to avoid the increase in size of `Point` arrays that happened after native histograms had been added. The higher-level data structures (`Sample`, `Series`, etc.) are still “polymorphous”. The same idea could be applied to them, but at each step the trade-offs needed to be evaluated. The idea with this change is to do the minimum necessary to get back to pre-histogram performance for functions that do not touch histograms. Here are comparisons for the `changes` function. The test data doesn't include histograms yet. Ideally, there would be no change in the benchmark result at all. First runtime v2.39 compared to directly prior to this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10) ``` And then runtime v2.39 compared to after this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9) ``` In summary, the runtime doesn't really improve with this change for queries with just a few steps. For queries with many steps, this commit essentially reinstates the old performance. This is good because the many-step queries are the one that matter most (longest absolute runtime). In terms of allocations, though, this commit doesn't make a dent at all (numbers not shown). The reason is that most of the allocations happen in the sampleRingIterator (in the storage package), which has to be addressed in a separate commit. Signed-off-by: beorn7 <beorn@grafana.com>
2 years ago
F: 1,
},
},
{
promql.Sample{
Metric: labels.FromStrings(
"__name__", "ALERTS",
"alertname", "HTTPRequestRateHigh",
"alertstate", "firing",
"instance", "0",
"job", "app-server",
),
promql: Separate `Point` into `FPoint` and `HPoint` In other words: Instead of having a “polymorphous” `Point` that can either contain a float value or a histogram value, use an `FPoint` for floats and an `HPoint` for histograms. This seemingly small change has a _lot_ of repercussions throughout the codebase. The idea here is to avoid the increase in size of `Point` arrays that happened after native histograms had been added. The higher-level data structures (`Sample`, `Series`, etc.) are still “polymorphous”. The same idea could be applied to them, but at each step the trade-offs needed to be evaluated. The idea with this change is to do the minimum necessary to get back to pre-histogram performance for functions that do not touch histograms. Here are comparisons for the `changes` function. The test data doesn't include histograms yet. Ideally, there would be no change in the benchmark result at all. First runtime v2.39 compared to directly prior to this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10) ``` And then runtime v2.39 compared to after this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9) ``` In summary, the runtime doesn't really improve with this change for queries with just a few steps. For queries with many steps, this commit essentially reinstates the old performance. This is good because the many-step queries are the one that matter most (longest absolute runtime). In terms of allocations, though, this commit doesn't make a dent at all (numbers not shown). The reason is that most of the allocations happen in the sampleRingIterator (in the storage package), which has to be addressed in a separate commit. Signed-off-by: beorn7 <beorn@grafana.com>
2 years ago
F: 1,
},
},
{
promql.Sample{
Metric: labels.FromStrings(
"__name__", "ALERTS",
"alertname", "HTTPRequestRateHigh",
"alertstate", "firing",
"instance", "0",
"job", "app-server",
),
promql: Separate `Point` into `FPoint` and `HPoint` In other words: Instead of having a “polymorphous” `Point` that can either contain a float value or a histogram value, use an `FPoint` for floats and an `HPoint` for histograms. This seemingly small change has a _lot_ of repercussions throughout the codebase. The idea here is to avoid the increase in size of `Point` arrays that happened after native histograms had been added. The higher-level data structures (`Sample`, `Series`, etc.) are still “polymorphous”. The same idea could be applied to them, but at each step the trade-offs needed to be evaluated. The idea with this change is to do the minimum necessary to get back to pre-histogram performance for functions that do not touch histograms. Here are comparisons for the `changes` function. The test data doesn't include histograms yet. Ideally, there would be no change in the benchmark result at all. First runtime v2.39 compared to directly prior to this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10) ``` And then runtime v2.39 compared to after this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9) ``` In summary, the runtime doesn't really improve with this change for queries with just a few steps. For queries with many steps, this commit essentially reinstates the old performance. This is good because the many-step queries are the one that matter most (longest absolute runtime). In terms of allocations, though, this commit doesn't make a dent at all (numbers not shown). The reason is that most of the allocations happen in the sampleRingIterator (in the storage package), which has to be addressed in a separate commit. Signed-off-by: beorn7 <beorn@grafana.com>
2 years ago
F: 1,
},
},
{
promql.Sample{
Metric: labels.FromStrings(
"__name__", "ALERTS",
"alertname", "HTTPRequestRateHigh",
"alertstate", "firing",
"instance", "0",
"job", "app-server",
),
promql: Separate `Point` into `FPoint` and `HPoint` In other words: Instead of having a “polymorphous” `Point` that can either contain a float value or a histogram value, use an `FPoint` for floats and an `HPoint` for histograms. This seemingly small change has a _lot_ of repercussions throughout the codebase. The idea here is to avoid the increase in size of `Point` arrays that happened after native histograms had been added. The higher-level data structures (`Sample`, `Series`, etc.) are still “polymorphous”. The same idea could be applied to them, but at each step the trade-offs needed to be evaluated. The idea with this change is to do the minimum necessary to get back to pre-histogram performance for functions that do not touch histograms. Here are comparisons for the `changes` function. The test data doesn't include histograms yet. Ideally, there would be no change in the benchmark result at all. First runtime v2.39 compared to directly prior to this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10) ``` And then runtime v2.39 compared to after this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9) ``` In summary, the runtime doesn't really improve with this change for queries with just a few steps. For queries with many steps, this commit essentially reinstates the old performance. This is good because the many-step queries are the one that matter most (longest absolute runtime). In terms of allocations, though, this commit doesn't make a dent at all (numbers not shown). The reason is that most of the allocations happen in the sampleRingIterator (in the storage package), which has to be addressed in a separate commit. Signed-off-by: beorn7 <beorn@grafana.com>
2 years ago
F: 1,
},
},
// From now on the alert should keep firing.
{
promql.Sample{
Metric: labels.FromStrings(
"__name__", "ALERTS",
"alertname", "HTTPRequestRateHigh",
"alertstate", "firing",
"instance", "0",
"job", "app-server",
),
promql: Separate `Point` into `FPoint` and `HPoint` In other words: Instead of having a “polymorphous” `Point` that can either contain a float value or a histogram value, use an `FPoint` for floats and an `HPoint` for histograms. This seemingly small change has a _lot_ of repercussions throughout the codebase. The idea here is to avoid the increase in size of `Point` arrays that happened after native histograms had been added. The higher-level data structures (`Sample`, `Series`, etc.) are still “polymorphous”. The same idea could be applied to them, but at each step the trade-offs needed to be evaluated. The idea with this change is to do the minimum necessary to get back to pre-histogram performance for functions that do not touch histograms. Here are comparisons for the `changes` function. The test data doesn't include histograms yet. Ideally, there would be no change in the benchmark result at all. First runtime v2.39 compared to directly prior to this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10) ``` And then runtime v2.39 compared to after this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9) ``` In summary, the runtime doesn't really improve with this change for queries with just a few steps. For queries with many steps, this commit essentially reinstates the old performance. This is good because the many-step queries are the one that matter most (longest absolute runtime). In terms of allocations, though, this commit doesn't make a dent at all (numbers not shown). The reason is that most of the allocations happen in the sampleRingIterator (in the storage package), which has to be addressed in a separate commit. Signed-off-by: beorn7 <beorn@grafana.com>
2 years ago
F: 1,
},
},
}
baseTime := time.Unix(0, 0)
for i, result := range results {
t.Logf("case %d", i)
evalTime := baseTime.Add(time.Duration(i) * time.Minute)
promql: Separate `Point` into `FPoint` and `HPoint` In other words: Instead of having a “polymorphous” `Point` that can either contain a float value or a histogram value, use an `FPoint` for floats and an `HPoint` for histograms. This seemingly small change has a _lot_ of repercussions throughout the codebase. The idea here is to avoid the increase in size of `Point` arrays that happened after native histograms had been added. The higher-level data structures (`Sample`, `Series`, etc.) are still “polymorphous”. The same idea could be applied to them, but at each step the trade-offs needed to be evaluated. The idea with this change is to do the minimum necessary to get back to pre-histogram performance for functions that do not touch histograms. Here are comparisons for the `changes` function. The test data doesn't include histograms yet. Ideally, there would be no change in the benchmark result at all. First runtime v2.39 compared to directly prior to this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10) ``` And then runtime v2.39 compared to after this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9) ``` In summary, the runtime doesn't really improve with this change for queries with just a few steps. For queries with many steps, this commit essentially reinstates the old performance. This is good because the many-step queries are the one that matter most (longest absolute runtime). In terms of allocations, though, this commit doesn't make a dent at all (numbers not shown). The reason is that most of the allocations happen in the sampleRingIterator (in the storage package), which has to be addressed in a separate commit. Signed-off-by: beorn7 <beorn@grafana.com>
2 years ago
result[0].T = timestamp.FromTime(evalTime)
res, err := rule.Eval(context.TODO(), evalTime, EngineQueryFunc(testEngine, storage), nil, 0)
require.NoError(t, err)
var filteredRes promql.Vector // After removing 'ALERTS_FOR_STATE' samples.
for _, smpl := range res {
smplName := smpl.Metric.Get("__name__")
if smplName == "ALERTS" {
filteredRes = append(filteredRes, smpl)
} else {
// If not 'ALERTS', it has to be 'ALERTS_FOR_STATE'.
require.Equal(t, "ALERTS_FOR_STATE", smplName)
}
}
testutil.RequireEqual(t, result, filteredRes)
}
evalTime := baseTime.Add(time.Duration(len(results)) * time.Minute)
res, err := rule.Eval(context.TODO(), evalTime, EngineQueryFunc(testEngine, storage), nil, 0)
require.NoError(t, err)
require.Empty(t, res)
}
func TestPendingAndKeepFiringFor(t *testing.T) {
storage := promql.LoadedStorage(t, `
load 1m
http_requests{job="app-server", instance="0"} 75 10x10
`)
t.Cleanup(func() { storage.Close() })
expr, err := parser.ParseExpr(`http_requests > 50`)
require.NoError(t, err)
rule := NewAlertingRule(
"HTTPRequestRateHigh",
expr,
time.Minute,
time.Minute,
labels.EmptyLabels(),
labels.EmptyLabels(), labels.EmptyLabels(), "", true, nil,
)
result := promql.Sample{
Metric: labels.FromStrings(
"__name__", "ALERTS",
"alertname", "HTTPRequestRateHigh",
"alertstate", "pending",
"instance", "0",
"job", "app-server",
),
promql: Separate `Point` into `FPoint` and `HPoint` In other words: Instead of having a “polymorphous” `Point` that can either contain a float value or a histogram value, use an `FPoint` for floats and an `HPoint` for histograms. This seemingly small change has a _lot_ of repercussions throughout the codebase. The idea here is to avoid the increase in size of `Point` arrays that happened after native histograms had been added. The higher-level data structures (`Sample`, `Series`, etc.) are still “polymorphous”. The same idea could be applied to them, but at each step the trade-offs needed to be evaluated. The idea with this change is to do the minimum necessary to get back to pre-histogram performance for functions that do not touch histograms. Here are comparisons for the `changes` function. The test data doesn't include histograms yet. Ideally, there would be no change in the benchmark result at all. First runtime v2.39 compared to directly prior to this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10) ``` And then runtime v2.39 compared to after this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9) ``` In summary, the runtime doesn't really improve with this change for queries with just a few steps. For queries with many steps, this commit essentially reinstates the old performance. This is good because the many-step queries are the one that matter most (longest absolute runtime). In terms of allocations, though, this commit doesn't make a dent at all (numbers not shown). The reason is that most of the allocations happen in the sampleRingIterator (in the storage package), which has to be addressed in a separate commit. Signed-off-by: beorn7 <beorn@grafana.com>
2 years ago
F: 1,
}
baseTime := time.Unix(0, 0)
promql: Separate `Point` into `FPoint` and `HPoint` In other words: Instead of having a “polymorphous” `Point` that can either contain a float value or a histogram value, use an `FPoint` for floats and an `HPoint` for histograms. This seemingly small change has a _lot_ of repercussions throughout the codebase. The idea here is to avoid the increase in size of `Point` arrays that happened after native histograms had been added. The higher-level data structures (`Sample`, `Series`, etc.) are still “polymorphous”. The same idea could be applied to them, but at each step the trade-offs needed to be evaluated. The idea with this change is to do the minimum necessary to get back to pre-histogram performance for functions that do not touch histograms. Here are comparisons for the `changes` function. The test data doesn't include histograms yet. Ideally, there would be no change in the benchmark result at all. First runtime v2.39 compared to directly prior to this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10) ``` And then runtime v2.39 compared to after this commit: ``` name old time/op new time/op delta RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8) RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10) RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10) RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8) RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10) RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9) RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10) RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10) RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9) ``` In summary, the runtime doesn't really improve with this change for queries with just a few steps. For queries with many steps, this commit essentially reinstates the old performance. This is good because the many-step queries are the one that matter most (longest absolute runtime). In terms of allocations, though, this commit doesn't make a dent at all (numbers not shown). The reason is that most of the allocations happen in the sampleRingIterator (in the storage package), which has to be addressed in a separate commit. Signed-off-by: beorn7 <beorn@grafana.com>
2 years ago
result.T = timestamp.FromTime(baseTime)
res, err := rule.Eval(context.TODO(), baseTime, EngineQueryFunc(testEngine, storage), nil, 0)
require.NoError(t, err)
require.Len(t, res, 2)
for _, smpl := range res {
smplName := smpl.Metric.Get("__name__")
if smplName == "ALERTS" {
testutil.RequireEqual(t, result, smpl)
} else {
// If not 'ALERTS', it has to be 'ALERTS_FOR_STATE'.
require.Equal(t, "ALERTS_FOR_STATE", smplName)
}
}
evalTime := baseTime.Add(time.Minute)
res, err = rule.Eval(context.TODO(), evalTime, EngineQueryFunc(testEngine, storage), nil, 0)
require.NoError(t, err)
require.Empty(t, res)
}
// TestAlertingEvalWithOrigin checks that the alerting rule details are passed through the context.
func TestAlertingEvalWithOrigin(t *testing.T) {
ctx := context.Background()
now := time.Now()
const (
name = "my-recording-rule"
query = `count(metric{foo="bar"}) > 0`
)
var (
detail RuleDetail
lbs = labels.FromStrings("test", "test")
)
expr, err := parser.ParseExpr(query)
require.NoError(t, err)
rule := NewAlertingRule(
name,
expr,
time.Second,
time.Minute,
lbs,
labels.EmptyLabels(),
labels.EmptyLabels(),
"",
true, log.NewNopLogger(),
)
_, err = rule.Eval(ctx, now, func(ctx context.Context, qs string, _ time.Time) (promql.Vector, error) {
detail = FromOriginContext(ctx)
return nil, nil
}, nil, 0)
require.NoError(t, err)
require.Equal(t, detail, NewRuleDetail(rule))
}
func TestAlertingRule_SetNoDependentRules(t *testing.T) {
rule := NewAlertingRule(
"test",
&parser.NumberLiteral{Val: 1},
time.Minute,
0,
labels.FromStrings("test", "test"),
labels.EmptyLabels(),
labels.EmptyLabels(),
"",
true, log.NewNopLogger(),
)
require.False(t, rule.NoDependentRules())
rule.SetNoDependentRules(false)
require.False(t, rule.NoDependentRules())
rule.SetNoDependentRules(true)
require.True(t, rule.NoDependentRules())
}
func TestAlertingRule_SetNoDependencyRules(t *testing.T) {
rule := NewAlertingRule(
"test",
&parser.NumberLiteral{Val: 1},
time.Minute,
0,
labels.FromStrings("test", "test"),
labels.EmptyLabels(),
labels.EmptyLabels(),
"",
true, log.NewNopLogger(),
)
require.False(t, rule.NoDependencyRules())
rule.SetNoDependencyRules(false)
require.False(t, rule.NoDependencyRules())
rule.SetNoDependencyRules(true)
require.True(t, rule.NoDependencyRules())
}