You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
prometheus/tsdb/wlog/watcher_test.go

800 lines
22 KiB

Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
// Copyright 2018 The Prometheus Authors
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package wlog
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
import (
"fmt"
"math/rand"
"os"
"path"
"sync"
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
"testing"
"time"
"github.com/go-kit/log"
"github.com/prometheus/client_golang/prometheus"
"github.com/stretchr/testify/require"
"github.com/prometheus/prometheus/model/histogram"
"github.com/prometheus/prometheus/model/labels"
"github.com/prometheus/prometheus/tsdb/chunks"
"github.com/prometheus/prometheus/tsdb/record"
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
)
var (
defaultRetryInterval = 100 * time.Millisecond
defaultRetries = 100
wMetrics = NewWatcherMetrics(prometheus.DefaultRegisterer)
)
// retry executes f() n times at each interval until it returns true.
func retry(t *testing.T, interval time.Duration, n int, f func() bool) {
t.Helper()
ticker := time.NewTicker(interval)
for i := 0; i <= n; i++ {
if f() {
return
}
<-ticker.C
}
ticker.Stop()
t.Logf("function returned false")
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
type writeToMock struct {
samplesAppended int
exemplarsAppended int
histogramsAppended int
floatHistogramsAppended int
seriesLock sync.Mutex
seriesSegmentIndexes map[chunks.HeadSeriesRef]int
// delay reads with a short sleep
delay time.Duration
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
}
func (wtm *writeToMock) Append(s []record.RefSample) bool {
if wtm.delay > 0 {
time.Sleep(wtm.delay)
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
wtm.samplesAppended += len(s)
return true
}
Add Exemplar Remote Write support (#8296) * Write exemplars to the WAL and send them over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update example for exemplars, print data in a more obvious format. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add metrics for remote write of exemplars. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix incorrect slices passed to send in remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * We need to unregister the new metrics. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> * Order of exemplar append vs write exemplar to WAL needs to change. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Condense sample/exemplar delivery tests to parameterized sub-tests Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename test methods for clarity now that they also handle exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename counter variable. Fix instances where metrics were not updated correctly Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Add exemplars to LoadWAL benchmark Signed-off-by: Callum Styan <callumstyan@gmail.com> * last exemplars timestamp metric needs to convert value to seconds with ms precision Signed-off-by: Callum Styan <callumstyan@gmail.com> * Process exemplar records in a separate go routine when loading the WAL. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments related to clarifying comments and variable names. Also refactor sample/exemplar to enqueue prompb types. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Regenerate types proto with comments, update protoc version again. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Put remote write of exemplars behind a feature flag. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address some of Ganesh's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Move exemplar remote write feature flag to a config file field. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address Bartek's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Don't allocate exemplar buffers in queue_manager if we're not going to send exemplars over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add ValidateExemplar function, validate exemplars when appending to head and log them all to WAL before adding them to exemplar storage. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address more reivew comments from Ganesh. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add exemplar total label length check. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address a few last review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> Co-authored-by: Martin Disibio <mdisibio@gmail.com>
4 years ago
func (wtm *writeToMock) AppendExemplars(e []record.RefExemplar) bool {
if wtm.delay > 0 {
time.Sleep(wtm.delay)
}
Add Exemplar Remote Write support (#8296) * Write exemplars to the WAL and send them over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update example for exemplars, print data in a more obvious format. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add metrics for remote write of exemplars. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix incorrect slices passed to send in remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * We need to unregister the new metrics. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> * Order of exemplar append vs write exemplar to WAL needs to change. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Condense sample/exemplar delivery tests to parameterized sub-tests Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename test methods for clarity now that they also handle exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename counter variable. Fix instances where metrics were not updated correctly Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Add exemplars to LoadWAL benchmark Signed-off-by: Callum Styan <callumstyan@gmail.com> * last exemplars timestamp metric needs to convert value to seconds with ms precision Signed-off-by: Callum Styan <callumstyan@gmail.com> * Process exemplar records in a separate go routine when loading the WAL. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments related to clarifying comments and variable names. Also refactor sample/exemplar to enqueue prompb types. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Regenerate types proto with comments, update protoc version again. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Put remote write of exemplars behind a feature flag. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address some of Ganesh's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Move exemplar remote write feature flag to a config file field. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address Bartek's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Don't allocate exemplar buffers in queue_manager if we're not going to send exemplars over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add ValidateExemplar function, validate exemplars when appending to head and log them all to WAL before adding them to exemplar storage. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address more reivew comments from Ganesh. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add exemplar total label length check. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address a few last review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> Co-authored-by: Martin Disibio <mdisibio@gmail.com>
4 years ago
wtm.exemplarsAppended += len(e)
return true
}
func (wtm *writeToMock) AppendHistograms(h []record.RefHistogramSample) bool {
if wtm.delay > 0 {
time.Sleep(wtm.delay)
}
wtm.histogramsAppended += len(h)
return true
}
func (wtm *writeToMock) AppendFloatHistograms(fh []record.RefFloatHistogramSample) bool {
if wtm.delay > 0 {
time.Sleep(wtm.delay)
}
wtm.floatHistogramsAppended += len(fh)
return true
}
func (wtm *writeToMock) StoreSeries(series []record.RefSeries, index int) {
if wtm.delay > 0 {
time.Sleep(wtm.delay)
}
wtm.UpdateSeriesSegment(series, index)
}
func (wtm *writeToMock) UpdateSeriesSegment(series []record.RefSeries, index int) {
wtm.seriesLock.Lock()
defer wtm.seriesLock.Unlock()
for _, s := range series {
wtm.seriesSegmentIndexes[s.Ref] = index
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
}
}
func (wtm *writeToMock) SeriesReset(index int) {
// Check for series that are in segments older than the checkpoint
// that were not also present in the checkpoint.
wtm.seriesLock.Lock()
defer wtm.seriesLock.Unlock()
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
for k, v := range wtm.seriesSegmentIndexes {
if v < index {
delete(wtm.seriesSegmentIndexes, k)
}
}
}
[tsdb] re-implement WAL watcher to read via a "notification" channel (#11949) * WIP implement WAL watcher reading via notifications over a channel from the TSDB code Signed-off-by: Callum Styan <callumstyan@gmail.com> * Notify via head appenders Commit (finished all WAL logging) rather than on each WAL Log call Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix misspelled Notify plus add a metric for dropped Write notifications Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update tests to handle new notification pattern Signed-off-by: Callum Styan <callumstyan@gmail.com> * this test maybe needs more time on windows? Signed-off-by: Callum Styan <callumstyan@gmail.com> * does this test need more time on windows as well? Signed-off-by: Callum Styan <callumstyan@gmail.com> * read timeout is already a time.Duration Signed-off-by: Callum Styan <callumstyan@gmail.com> * remove mistakenly commited benchmark data files Signed-off-by: Callum Styan <callumstyan@gmail.com> * address some review feedback Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix missed changes from previous commit Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix issues from wrapper function Signed-off-by: Callum Styan <callumstyan@gmail.com> * try fixing race condition in test by allowing tests to overwrite the read ticker timeout instead of calling the Notify function Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix linting Signed-off-by: Callum Styan <callumstyan@gmail.com> --------- Signed-off-by: Callum Styan <callumstyan@gmail.com>
2 years ago
func (wtm *writeToMock) checkNumSeries() int {
wtm.seriesLock.Lock()
defer wtm.seriesLock.Unlock()
return len(wtm.seriesSegmentIndexes)
}
func newWriteToMock(delay time.Duration) *writeToMock {
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
return &writeToMock{
seriesSegmentIndexes: make(map[chunks.HeadSeriesRef]int),
delay: delay,
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
}
}
func TestTailSamples(t *testing.T) {
pageSize := 32 * 1024
const seriesCount = 10
const samplesCount = 250
Add Exemplar Remote Write support (#8296) * Write exemplars to the WAL and send them over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update example for exemplars, print data in a more obvious format. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add metrics for remote write of exemplars. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix incorrect slices passed to send in remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * We need to unregister the new metrics. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> * Order of exemplar append vs write exemplar to WAL needs to change. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Condense sample/exemplar delivery tests to parameterized sub-tests Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename test methods for clarity now that they also handle exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename counter variable. Fix instances where metrics were not updated correctly Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Add exemplars to LoadWAL benchmark Signed-off-by: Callum Styan <callumstyan@gmail.com> * last exemplars timestamp metric needs to convert value to seconds with ms precision Signed-off-by: Callum Styan <callumstyan@gmail.com> * Process exemplar records in a separate go routine when loading the WAL. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments related to clarifying comments and variable names. Also refactor sample/exemplar to enqueue prompb types. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Regenerate types proto with comments, update protoc version again. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Put remote write of exemplars behind a feature flag. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address some of Ganesh's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Move exemplar remote write feature flag to a config file field. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address Bartek's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Don't allocate exemplar buffers in queue_manager if we're not going to send exemplars over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add ValidateExemplar function, validate exemplars when appending to head and log them all to WAL before adding them to exemplar storage. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address more reivew comments from Ganesh. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add exemplar total label length check. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address a few last review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> Co-authored-by: Martin Disibio <mdisibio@gmail.com>
4 years ago
const exemplarsCount = 25
const histogramsCount = 50
for _, compress := range []CompressionType{CompressionNone, CompressionSnappy, CompressionZstd} {
t.Run(fmt.Sprintf("compress=%s", compress), func(t *testing.T) {
now := time.Now()
dir := t.TempDir()
wdir := path.Join(dir, "wal")
err := os.Mkdir(wdir, 0o777)
require.NoError(t, err)
enc := record.Encoder{}
w, err := NewSize(nil, nil, wdir, 128*pageSize, compress)
require.NoError(t, err)
defer func() {
require.NoError(t, w.Close())
}()
// Write to the initial segment then checkpoint.
for i := 0; i < seriesCount; i++ {
ref := i + 100
series := enc.Series([]record.RefSeries{
{
Ref: chunks.HeadSeriesRef(ref),
Labels: labels.FromStrings("__name__", fmt.Sprintf("metric_%d", i)),
},
}, nil)
require.NoError(t, w.Log(series))
for j := 0; j < samplesCount; j++ {
inner := rand.Intn(ref + 1)
sample := enc.Samples([]record.RefSample{
{
Ref: chunks.HeadSeriesRef(inner),
T: now.UnixNano() + 1,
V: float64(i),
},
}, nil)
require.NoError(t, w.Log(sample))
}
Add Exemplar Remote Write support (#8296) * Write exemplars to the WAL and send them over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update example for exemplars, print data in a more obvious format. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add metrics for remote write of exemplars. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix incorrect slices passed to send in remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * We need to unregister the new metrics. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> * Order of exemplar append vs write exemplar to WAL needs to change. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Condense sample/exemplar delivery tests to parameterized sub-tests Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename test methods for clarity now that they also handle exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename counter variable. Fix instances where metrics were not updated correctly Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Add exemplars to LoadWAL benchmark Signed-off-by: Callum Styan <callumstyan@gmail.com> * last exemplars timestamp metric needs to convert value to seconds with ms precision Signed-off-by: Callum Styan <callumstyan@gmail.com> * Process exemplar records in a separate go routine when loading the WAL. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments related to clarifying comments and variable names. Also refactor sample/exemplar to enqueue prompb types. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Regenerate types proto with comments, update protoc version again. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Put remote write of exemplars behind a feature flag. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address some of Ganesh's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Move exemplar remote write feature flag to a config file field. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address Bartek's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Don't allocate exemplar buffers in queue_manager if we're not going to send exemplars over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add ValidateExemplar function, validate exemplars when appending to head and log them all to WAL before adding them to exemplar storage. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address more reivew comments from Ganesh. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add exemplar total label length check. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address a few last review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> Co-authored-by: Martin Disibio <mdisibio@gmail.com>
4 years ago
for j := 0; j < exemplarsCount; j++ {
inner := rand.Intn(ref + 1)
exemplar := enc.Exemplars([]record.RefExemplar{
{
Ref: chunks.HeadSeriesRef(inner),
Add Exemplar Remote Write support (#8296) * Write exemplars to the WAL and send them over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update example for exemplars, print data in a more obvious format. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add metrics for remote write of exemplars. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix incorrect slices passed to send in remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * We need to unregister the new metrics. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> * Order of exemplar append vs write exemplar to WAL needs to change. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Condense sample/exemplar delivery tests to parameterized sub-tests Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename test methods for clarity now that they also handle exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename counter variable. Fix instances where metrics were not updated correctly Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Add exemplars to LoadWAL benchmark Signed-off-by: Callum Styan <callumstyan@gmail.com> * last exemplars timestamp metric needs to convert value to seconds with ms precision Signed-off-by: Callum Styan <callumstyan@gmail.com> * Process exemplar records in a separate go routine when loading the WAL. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments related to clarifying comments and variable names. Also refactor sample/exemplar to enqueue prompb types. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Regenerate types proto with comments, update protoc version again. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Put remote write of exemplars behind a feature flag. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address some of Ganesh's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Move exemplar remote write feature flag to a config file field. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address Bartek's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Don't allocate exemplar buffers in queue_manager if we're not going to send exemplars over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add ValidateExemplar function, validate exemplars when appending to head and log them all to WAL before adding them to exemplar storage. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address more reivew comments from Ganesh. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add exemplar total label length check. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address a few last review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> Co-authored-by: Martin Disibio <mdisibio@gmail.com>
4 years ago
T: now.UnixNano() + 1,
V: float64(i),
Labels: labels.FromStrings("trace_id", fmt.Sprintf("trace-%d", inner)),
Add Exemplar Remote Write support (#8296) * Write exemplars to the WAL and send them over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update example for exemplars, print data in a more obvious format. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add metrics for remote write of exemplars. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix incorrect slices passed to send in remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * We need to unregister the new metrics. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> * Order of exemplar append vs write exemplar to WAL needs to change. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Condense sample/exemplar delivery tests to parameterized sub-tests Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename test methods for clarity now that they also handle exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename counter variable. Fix instances where metrics were not updated correctly Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Add exemplars to LoadWAL benchmark Signed-off-by: Callum Styan <callumstyan@gmail.com> * last exemplars timestamp metric needs to convert value to seconds with ms precision Signed-off-by: Callum Styan <callumstyan@gmail.com> * Process exemplar records in a separate go routine when loading the WAL. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments related to clarifying comments and variable names. Also refactor sample/exemplar to enqueue prompb types. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Regenerate types proto with comments, update protoc version again. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Put remote write of exemplars behind a feature flag. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address some of Ganesh's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Move exemplar remote write feature flag to a config file field. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address Bartek's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Don't allocate exemplar buffers in queue_manager if we're not going to send exemplars over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add ValidateExemplar function, validate exemplars when appending to head and log them all to WAL before adding them to exemplar storage. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address more reivew comments from Ganesh. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add exemplar total label length check. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address a few last review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> Co-authored-by: Martin Disibio <mdisibio@gmail.com>
4 years ago
},
}, nil)
require.NoError(t, w.Log(exemplar))
}
for j := 0; j < histogramsCount; j++ {
inner := rand.Intn(ref + 1)
hist := &histogram.Histogram{
Schema: 2,
ZeroThreshold: 1e-128,
ZeroCount: 0,
Count: 2,
Sum: 0,
PositiveSpans: []histogram.Span{{Offset: 0, Length: 1}},
PositiveBuckets: []int64{int64(i) + 1},
NegativeSpans: []histogram.Span{{Offset: 0, Length: 1}},
NegativeBuckets: []int64{int64(-i) - 1},
}
histogram := enc.HistogramSamples([]record.RefHistogramSample{{
Ref: chunks.HeadSeriesRef(inner),
T: now.UnixNano() + 1,
H: hist,
}}, nil)
require.NoError(t, w.Log(histogram))
floatHistogram := enc.FloatHistogramSamples([]record.RefFloatHistogramSample{{
Ref: chunks.HeadSeriesRef(inner),
T: now.UnixNano() + 1,
FH: hist.ToFloat(nil),
}}, nil)
require.NoError(t, w.Log(floatHistogram))
}
}
// Start read after checkpoint, no more data written.
first, last, err := Segments(w.Dir())
require.NoError(t, err)
wt := newWriteToMock(0)
watcher := NewWatcher(wMetrics, nil, nil, "", wt, dir, true, true)
watcher.SetStartTime(now)
// Set the Watcher's metrics so they're not nil pointers.
watcher.setMetrics()
for i := first; i <= last; i++ {
segment, err := OpenReadSegment(SegmentName(watcher.walDir, i))
require.NoError(t, err)
defer segment.Close()
reader := NewLiveReader(nil, NewLiveReaderMetrics(nil), segment)
// Use tail true so we can ensure we got the right number of samples.
watcher.readSegment(reader, i, true)
}
expectedSeries := seriesCount
expectedSamples := seriesCount * samplesCount
Add Exemplar Remote Write support (#8296) * Write exemplars to the WAL and send them over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update example for exemplars, print data in a more obvious format. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add metrics for remote write of exemplars. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix incorrect slices passed to send in remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * We need to unregister the new metrics. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> * Order of exemplar append vs write exemplar to WAL needs to change. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Condense sample/exemplar delivery tests to parameterized sub-tests Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename test methods for clarity now that they also handle exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename counter variable. Fix instances where metrics were not updated correctly Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Add exemplars to LoadWAL benchmark Signed-off-by: Callum Styan <callumstyan@gmail.com> * last exemplars timestamp metric needs to convert value to seconds with ms precision Signed-off-by: Callum Styan <callumstyan@gmail.com> * Process exemplar records in a separate go routine when loading the WAL. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments related to clarifying comments and variable names. Also refactor sample/exemplar to enqueue prompb types. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Regenerate types proto with comments, update protoc version again. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Put remote write of exemplars behind a feature flag. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address some of Ganesh's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Move exemplar remote write feature flag to a config file field. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address Bartek's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Don't allocate exemplar buffers in queue_manager if we're not going to send exemplars over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add ValidateExemplar function, validate exemplars when appending to head and log them all to WAL before adding them to exemplar storage. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address more reivew comments from Ganesh. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add exemplar total label length check. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address a few last review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> Co-authored-by: Martin Disibio <mdisibio@gmail.com>
4 years ago
expectedExemplars := seriesCount * exemplarsCount
expectedHistograms := seriesCount * histogramsCount
retry(t, defaultRetryInterval, defaultRetries, func() bool {
[tsdb] re-implement WAL watcher to read via a "notification" channel (#11949) * WIP implement WAL watcher reading via notifications over a channel from the TSDB code Signed-off-by: Callum Styan <callumstyan@gmail.com> * Notify via head appenders Commit (finished all WAL logging) rather than on each WAL Log call Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix misspelled Notify plus add a metric for dropped Write notifications Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update tests to handle new notification pattern Signed-off-by: Callum Styan <callumstyan@gmail.com> * this test maybe needs more time on windows? Signed-off-by: Callum Styan <callumstyan@gmail.com> * does this test need more time on windows as well? Signed-off-by: Callum Styan <callumstyan@gmail.com> * read timeout is already a time.Duration Signed-off-by: Callum Styan <callumstyan@gmail.com> * remove mistakenly commited benchmark data files Signed-off-by: Callum Styan <callumstyan@gmail.com> * address some review feedback Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix missed changes from previous commit Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix issues from wrapper function Signed-off-by: Callum Styan <callumstyan@gmail.com> * try fixing race condition in test by allowing tests to overwrite the read ticker timeout instead of calling the Notify function Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix linting Signed-off-by: Callum Styan <callumstyan@gmail.com> --------- Signed-off-by: Callum Styan <callumstyan@gmail.com>
2 years ago
return wt.checkNumSeries() >= expectedSeries
})
[tsdb] re-implement WAL watcher to read via a "notification" channel (#11949) * WIP implement WAL watcher reading via notifications over a channel from the TSDB code Signed-off-by: Callum Styan <callumstyan@gmail.com> * Notify via head appenders Commit (finished all WAL logging) rather than on each WAL Log call Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix misspelled Notify plus add a metric for dropped Write notifications Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update tests to handle new notification pattern Signed-off-by: Callum Styan <callumstyan@gmail.com> * this test maybe needs more time on windows? Signed-off-by: Callum Styan <callumstyan@gmail.com> * does this test need more time on windows as well? Signed-off-by: Callum Styan <callumstyan@gmail.com> * read timeout is already a time.Duration Signed-off-by: Callum Styan <callumstyan@gmail.com> * remove mistakenly commited benchmark data files Signed-off-by: Callum Styan <callumstyan@gmail.com> * address some review feedback Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix missed changes from previous commit Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix issues from wrapper function Signed-off-by: Callum Styan <callumstyan@gmail.com> * try fixing race condition in test by allowing tests to overwrite the read ticker timeout instead of calling the Notify function Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix linting Signed-off-by: Callum Styan <callumstyan@gmail.com> --------- Signed-off-by: Callum Styan <callumstyan@gmail.com>
2 years ago
require.Equal(t, expectedSeries, wt.checkNumSeries(), "did not receive the expected number of series")
Add Exemplar Remote Write support (#8296) * Write exemplars to the WAL and send them over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update example for exemplars, print data in a more obvious format. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add metrics for remote write of exemplars. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix incorrect slices passed to send in remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * We need to unregister the new metrics. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> * Order of exemplar append vs write exemplar to WAL needs to change. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Condense sample/exemplar delivery tests to parameterized sub-tests Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename test methods for clarity now that they also handle exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename counter variable. Fix instances where metrics were not updated correctly Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Add exemplars to LoadWAL benchmark Signed-off-by: Callum Styan <callumstyan@gmail.com> * last exemplars timestamp metric needs to convert value to seconds with ms precision Signed-off-by: Callum Styan <callumstyan@gmail.com> * Process exemplar records in a separate go routine when loading the WAL. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments related to clarifying comments and variable names. Also refactor sample/exemplar to enqueue prompb types. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Regenerate types proto with comments, update protoc version again. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Put remote write of exemplars behind a feature flag. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address some of Ganesh's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Move exemplar remote write feature flag to a config file field. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address Bartek's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Don't allocate exemplar buffers in queue_manager if we're not going to send exemplars over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add ValidateExemplar function, validate exemplars when appending to head and log them all to WAL before adding them to exemplar storage. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address more reivew comments from Ganesh. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add exemplar total label length check. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address a few last review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> Co-authored-by: Martin Disibio <mdisibio@gmail.com>
4 years ago
require.Equal(t, expectedSamples, wt.samplesAppended, "did not receive the expected number of samples")
require.Equal(t, expectedExemplars, wt.exemplarsAppended, "did not receive the expected number of exemplars")
require.Equal(t, expectedHistograms, wt.histogramsAppended, "did not receive the expected number of histograms")
require.Equal(t, expectedHistograms, wt.floatHistogramsAppended, "did not receive the expected number of float histograms")
})
}
}
func TestReadToEndNoCheckpoint(t *testing.T) {
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
pageSize := 32 * 1024
const seriesCount = 10
const samplesCount = 250
for _, compress := range []CompressionType{CompressionNone, CompressionSnappy, CompressionZstd} {
t.Run(fmt.Sprintf("compress=%s", compress), func(t *testing.T) {
dir := t.TempDir()
wdir := path.Join(dir, "wal")
err := os.Mkdir(wdir, 0o777)
require.NoError(t, err)
w, err := NewSize(nil, nil, wdir, 128*pageSize, compress)
require.NoError(t, err)
defer func() {
require.NoError(t, w.Close())
}()
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
var recs [][]byte
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
enc := record.Encoder{}
for i := 0; i < seriesCount; i++ {
series := enc.Series([]record.RefSeries{
{
Ref: chunks.HeadSeriesRef(i),
Labels: labels.FromStrings("__name__", fmt.Sprintf("metric_%d", i)),
},
}, nil)
recs = append(recs, series)
for j := 0; j < samplesCount; j++ {
sample := enc.Samples([]record.RefSample{
{
Ref: chunks.HeadSeriesRef(j),
T: int64(i),
V: float64(i),
},
}, nil)
recs = append(recs, sample)
// Randomly batch up records.
if rand.Intn(4) < 3 {
require.NoError(t, w.Log(recs...))
recs = recs[:0]
}
}
}
require.NoError(t, w.Log(recs...))
[tsdb] re-implement WAL watcher to read via a "notification" channel (#11949) * WIP implement WAL watcher reading via notifications over a channel from the TSDB code Signed-off-by: Callum Styan <callumstyan@gmail.com> * Notify via head appenders Commit (finished all WAL logging) rather than on each WAL Log call Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix misspelled Notify plus add a metric for dropped Write notifications Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update tests to handle new notification pattern Signed-off-by: Callum Styan <callumstyan@gmail.com> * this test maybe needs more time on windows? Signed-off-by: Callum Styan <callumstyan@gmail.com> * does this test need more time on windows as well? Signed-off-by: Callum Styan <callumstyan@gmail.com> * read timeout is already a time.Duration Signed-off-by: Callum Styan <callumstyan@gmail.com> * remove mistakenly commited benchmark data files Signed-off-by: Callum Styan <callumstyan@gmail.com> * address some review feedback Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix missed changes from previous commit Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix issues from wrapper function Signed-off-by: Callum Styan <callumstyan@gmail.com> * try fixing race condition in test by allowing tests to overwrite the read ticker timeout instead of calling the Notify function Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix linting Signed-off-by: Callum Styan <callumstyan@gmail.com> --------- Signed-off-by: Callum Styan <callumstyan@gmail.com>
2 years ago
readTimeout = time.Second
_, _, err = Segments(w.Dir())
require.NoError(t, err)
wt := newWriteToMock(0)
watcher := NewWatcher(wMetrics, nil, nil, "", wt, dir, false, false)
go watcher.Start()
expected := seriesCount
[tsdb] re-implement WAL watcher to read via a "notification" channel (#11949) * WIP implement WAL watcher reading via notifications over a channel from the TSDB code Signed-off-by: Callum Styan <callumstyan@gmail.com> * Notify via head appenders Commit (finished all WAL logging) rather than on each WAL Log call Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix misspelled Notify plus add a metric for dropped Write notifications Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update tests to handle new notification pattern Signed-off-by: Callum Styan <callumstyan@gmail.com> * this test maybe needs more time on windows? Signed-off-by: Callum Styan <callumstyan@gmail.com> * does this test need more time on windows as well? Signed-off-by: Callum Styan <callumstyan@gmail.com> * read timeout is already a time.Duration Signed-off-by: Callum Styan <callumstyan@gmail.com> * remove mistakenly commited benchmark data files Signed-off-by: Callum Styan <callumstyan@gmail.com> * address some review feedback Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix missed changes from previous commit Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix issues from wrapper function Signed-off-by: Callum Styan <callumstyan@gmail.com> * try fixing race condition in test by allowing tests to overwrite the read ticker timeout instead of calling the Notify function Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix linting Signed-off-by: Callum Styan <callumstyan@gmail.com> --------- Signed-off-by: Callum Styan <callumstyan@gmail.com>
2 years ago
require.Eventually(t, func() bool {
return wt.checkNumSeries() == expected
}, 20*time.Second, 1*time.Second)
watcher.Stop()
})
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
}
func TestReadToEndWithCheckpoint(t *testing.T) {
segmentSize := 32 * 1024
// We need something similar to this # of series and samples
// in order to get enough segments for us to checkpoint.
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
const seriesCount = 10
const samplesCount = 250
for _, compress := range []CompressionType{CompressionNone, CompressionSnappy, CompressionZstd} {
t.Run(fmt.Sprintf("compress=%s", compress), func(t *testing.T) {
dir := t.TempDir()
wdir := path.Join(dir, "wal")
err := os.Mkdir(wdir, 0o777)
require.NoError(t, err)
enc := record.Encoder{}
w, err := NewSize(nil, nil, wdir, segmentSize, compress)
require.NoError(t, err)
defer func() {
require.NoError(t, w.Close())
}()
// Write to the initial segment then checkpoint.
for i := 0; i < seriesCount; i++ {
ref := i + 100
series := enc.Series([]record.RefSeries{
{
Ref: chunks.HeadSeriesRef(ref),
Labels: labels.FromStrings("__name__", fmt.Sprintf("metric_%d", i)),
},
}, nil)
require.NoError(t, w.Log(series))
// Add in an unknown record type, which should be ignored.
require.NoError(t, w.Log([]byte{255}))
for j := 0; j < samplesCount; j++ {
inner := rand.Intn(ref + 1)
sample := enc.Samples([]record.RefSample{
{
Ref: chunks.HeadSeriesRef(inner),
T: int64(i),
V: float64(i),
},
}, nil)
require.NoError(t, w.Log(sample))
}
}
Checkpoint(log.NewNopLogger(), w, 0, 1, func(x chunks.HeadSeriesRef) bool { return true }, 0)
w.Truncate(1)
// Write more records after checkpointing.
for i := 0; i < seriesCount; i++ {
series := enc.Series([]record.RefSeries{
{
Ref: chunks.HeadSeriesRef(i),
Labels: labels.FromStrings("__name__", fmt.Sprintf("metric_%d", i)),
},
}, nil)
require.NoError(t, w.Log(series))
for j := 0; j < samplesCount; j++ {
sample := enc.Samples([]record.RefSample{
{
Ref: chunks.HeadSeriesRef(j),
T: int64(i),
V: float64(i),
},
}, nil)
require.NoError(t, w.Log(sample))
}
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
_, _, err = Segments(w.Dir())
require.NoError(t, err)
[tsdb] re-implement WAL watcher to read via a "notification" channel (#11949) * WIP implement WAL watcher reading via notifications over a channel from the TSDB code Signed-off-by: Callum Styan <callumstyan@gmail.com> * Notify via head appenders Commit (finished all WAL logging) rather than on each WAL Log call Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix misspelled Notify plus add a metric for dropped Write notifications Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update tests to handle new notification pattern Signed-off-by: Callum Styan <callumstyan@gmail.com> * this test maybe needs more time on windows? Signed-off-by: Callum Styan <callumstyan@gmail.com> * does this test need more time on windows as well? Signed-off-by: Callum Styan <callumstyan@gmail.com> * read timeout is already a time.Duration Signed-off-by: Callum Styan <callumstyan@gmail.com> * remove mistakenly commited benchmark data files Signed-off-by: Callum Styan <callumstyan@gmail.com> * address some review feedback Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix missed changes from previous commit Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix issues from wrapper function Signed-off-by: Callum Styan <callumstyan@gmail.com> * try fixing race condition in test by allowing tests to overwrite the read ticker timeout instead of calling the Notify function Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix linting Signed-off-by: Callum Styan <callumstyan@gmail.com> --------- Signed-off-by: Callum Styan <callumstyan@gmail.com>
2 years ago
readTimeout = time.Second
wt := newWriteToMock(0)
watcher := NewWatcher(wMetrics, nil, nil, "", wt, dir, false, false)
go watcher.Start()
expected := seriesCount * 2
[tsdb] re-implement WAL watcher to read via a "notification" channel (#11949) * WIP implement WAL watcher reading via notifications over a channel from the TSDB code Signed-off-by: Callum Styan <callumstyan@gmail.com> * Notify via head appenders Commit (finished all WAL logging) rather than on each WAL Log call Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix misspelled Notify plus add a metric for dropped Write notifications Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update tests to handle new notification pattern Signed-off-by: Callum Styan <callumstyan@gmail.com> * this test maybe needs more time on windows? Signed-off-by: Callum Styan <callumstyan@gmail.com> * does this test need more time on windows as well? Signed-off-by: Callum Styan <callumstyan@gmail.com> * read timeout is already a time.Duration Signed-off-by: Callum Styan <callumstyan@gmail.com> * remove mistakenly commited benchmark data files Signed-off-by: Callum Styan <callumstyan@gmail.com> * address some review feedback Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix missed changes from previous commit Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix issues from wrapper function Signed-off-by: Callum Styan <callumstyan@gmail.com> * try fixing race condition in test by allowing tests to overwrite the read ticker timeout instead of calling the Notify function Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix linting Signed-off-by: Callum Styan <callumstyan@gmail.com> --------- Signed-off-by: Callum Styan <callumstyan@gmail.com>
2 years ago
require.Eventually(t, func() bool {
return wt.checkNumSeries() == expected
}, 10*time.Second, 1*time.Second)
watcher.Stop()
})
}
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
}
func TestReadCheckpoint(t *testing.T) {
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
pageSize := 32 * 1024
const seriesCount = 10
const samplesCount = 250
for _, compress := range []CompressionType{CompressionNone, CompressionSnappy, CompressionZstd} {
t.Run(fmt.Sprintf("compress=%s", compress), func(t *testing.T) {
dir := t.TempDir()
wdir := path.Join(dir, "wal")
err := os.Mkdir(wdir, 0o777)
require.NoError(t, err)
Add out-of-order sample support to the TSDB (#11075) * Introduce out-of-order TSDB support This implementation is based on this design doc: https://docs.google.com/document/d/1Kppm7qL9C-BJB1j6yb6-9ObG3AbdZnFUBYPNNWwDBYM/edit?usp=sharing This commit adds support to accept out-of-order ("OOO") sample into the TSDB up to a configurable time allowance. If OOO is enabled, overlapping querying are automatically enabled. Most of the additions have been borrowed from https://github.com/grafana/mimir-prometheus/ Here is the list ist of the original commits cherry picked from mimir-prometheus into this branch: - 4b2198d7ec47d50989b7c2df66b7b207c32f7f6e - 2836e5513f1bc591535a859f5d41154a75e7c6bc - 00b379c3a5b1ec3799699b6242f300a2b3ea30f0 - ff0dc757587cada63ca948d2d5eb00bf090d63e0 - a632c73352a7e39d60b445700beb47d691549c3e - c6f3d4ab339ab80bbbce74c9946237ced01f0509 - 5e8406a1d4a50d0052bbee83e28ca3b3371408aa - abde1e0ba128936b9eb0224ee1551e56216ebd4a - e70e7698897bb03860bee0467c733fa44e14c9bd - df59320886e03a555d379ac4b0b3130f661407e0 Co-authored-by: Jesus Vazquez <jesus.vazquez@grafana.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: Dieter Plaetinck <dieter@grafana.com> Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * gofumpt files Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Add license header to missing files Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix OOO tests due to existing chunk disk mapper implementation Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix truncate int overflow Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Add Sync method to the WAL and update tests Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * remove useless sync Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Update minOOOTime after truncating Head * Update minOOOTime after truncating Head Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix lint Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Add a unit test Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Load OutOfOrderTimeWindow only once per appender Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix OOO Head LabelValues and PostingsForMatchers Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix replay of OOO mmap chunks Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Remove unnecessary err check Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Prevent panic with ApplyConfig Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Run OOO compaction after restart if there is OOO data from WBL Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Apply Bartek's suggestions Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com> Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Refactor OOO compaction Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Address comments and TODOs - Added a comment explaining why we need the allow overlapping compaction toggle - Clarified TSDBConfig OutOfOrderTimeWindow doc - Added an owner to all the TODOs in the code Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Run go format Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix remaining review comments Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix tests Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Change wbl reference when truncating ooo in TestHeadMinOOOTimeUpdate Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix TestWBLAndMmapReplay test failure on windows Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Address most of the feedback Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Refactor the block meta for out of order Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix windows error Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix review comments Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: Dieter Plaetinck <dieter@grafana.com> Co-authored-by: Oleg Zaytsev <mail@olegzaytsev.com> Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
2 years ago
f, err := os.Create(SegmentName(wdir, 30))
require.NoError(t, err)
require.NoError(t, f.Close())
enc := record.Encoder{}
w, err := NewSize(nil, nil, wdir, 128*pageSize, compress)
require.NoError(t, err)
Add out-of-order sample support to the TSDB (#11075) * Introduce out-of-order TSDB support This implementation is based on this design doc: https://docs.google.com/document/d/1Kppm7qL9C-BJB1j6yb6-9ObG3AbdZnFUBYPNNWwDBYM/edit?usp=sharing This commit adds support to accept out-of-order ("OOO") sample into the TSDB up to a configurable time allowance. If OOO is enabled, overlapping querying are automatically enabled. Most of the additions have been borrowed from https://github.com/grafana/mimir-prometheus/ Here is the list ist of the original commits cherry picked from mimir-prometheus into this branch: - 4b2198d7ec47d50989b7c2df66b7b207c32f7f6e - 2836e5513f1bc591535a859f5d41154a75e7c6bc - 00b379c3a5b1ec3799699b6242f300a2b3ea30f0 - ff0dc757587cada63ca948d2d5eb00bf090d63e0 - a632c73352a7e39d60b445700beb47d691549c3e - c6f3d4ab339ab80bbbce74c9946237ced01f0509 - 5e8406a1d4a50d0052bbee83e28ca3b3371408aa - abde1e0ba128936b9eb0224ee1551e56216ebd4a - e70e7698897bb03860bee0467c733fa44e14c9bd - df59320886e03a555d379ac4b0b3130f661407e0 Co-authored-by: Jesus Vazquez <jesus.vazquez@grafana.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: Dieter Plaetinck <dieter@grafana.com> Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * gofumpt files Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Add license header to missing files Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix OOO tests due to existing chunk disk mapper implementation Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix truncate int overflow Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Add Sync method to the WAL and update tests Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * remove useless sync Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Update minOOOTime after truncating Head * Update minOOOTime after truncating Head Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix lint Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Add a unit test Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Load OutOfOrderTimeWindow only once per appender Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix OOO Head LabelValues and PostingsForMatchers Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix replay of OOO mmap chunks Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Remove unnecessary err check Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Prevent panic with ApplyConfig Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Run OOO compaction after restart if there is OOO data from WBL Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Apply Bartek's suggestions Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com> Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Refactor OOO compaction Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Address comments and TODOs - Added a comment explaining why we need the allow overlapping compaction toggle - Clarified TSDBConfig OutOfOrderTimeWindow doc - Added an owner to all the TODOs in the code Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Run go format Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix remaining review comments Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix tests Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Change wbl reference when truncating ooo in TestHeadMinOOOTimeUpdate Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix TestWBLAndMmapReplay test failure on windows Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Address most of the feedback Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Refactor the block meta for out of order Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix windows error Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix review comments Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: Dieter Plaetinck <dieter@grafana.com> Co-authored-by: Oleg Zaytsev <mail@olegzaytsev.com> Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
2 years ago
t.Cleanup(func() {
require.NoError(t, w.Close())
Add out-of-order sample support to the TSDB (#11075) * Introduce out-of-order TSDB support This implementation is based on this design doc: https://docs.google.com/document/d/1Kppm7qL9C-BJB1j6yb6-9ObG3AbdZnFUBYPNNWwDBYM/edit?usp=sharing This commit adds support to accept out-of-order ("OOO") sample into the TSDB up to a configurable time allowance. If OOO is enabled, overlapping querying are automatically enabled. Most of the additions have been borrowed from https://github.com/grafana/mimir-prometheus/ Here is the list ist of the original commits cherry picked from mimir-prometheus into this branch: - 4b2198d7ec47d50989b7c2df66b7b207c32f7f6e - 2836e5513f1bc591535a859f5d41154a75e7c6bc - 00b379c3a5b1ec3799699b6242f300a2b3ea30f0 - ff0dc757587cada63ca948d2d5eb00bf090d63e0 - a632c73352a7e39d60b445700beb47d691549c3e - c6f3d4ab339ab80bbbce74c9946237ced01f0509 - 5e8406a1d4a50d0052bbee83e28ca3b3371408aa - abde1e0ba128936b9eb0224ee1551e56216ebd4a - e70e7698897bb03860bee0467c733fa44e14c9bd - df59320886e03a555d379ac4b0b3130f661407e0 Co-authored-by: Jesus Vazquez <jesus.vazquez@grafana.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: Dieter Plaetinck <dieter@grafana.com> Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * gofumpt files Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Add license header to missing files Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix OOO tests due to existing chunk disk mapper implementation Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix truncate int overflow Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Add Sync method to the WAL and update tests Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * remove useless sync Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Update minOOOTime after truncating Head * Update minOOOTime after truncating Head Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix lint Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Add a unit test Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Load OutOfOrderTimeWindow only once per appender Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix OOO Head LabelValues and PostingsForMatchers Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix replay of OOO mmap chunks Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Remove unnecessary err check Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Prevent panic with ApplyConfig Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Run OOO compaction after restart if there is OOO data from WBL Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Apply Bartek's suggestions Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com> Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Refactor OOO compaction Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Address comments and TODOs - Added a comment explaining why we need the allow overlapping compaction toggle - Clarified TSDBConfig OutOfOrderTimeWindow doc - Added an owner to all the TODOs in the code Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Run go format Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix remaining review comments Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix tests Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Change wbl reference when truncating ooo in TestHeadMinOOOTimeUpdate Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix TestWBLAndMmapReplay test failure on windows Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Address most of the feedback Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Refactor the block meta for out of order Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix windows error Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix review comments Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: Dieter Plaetinck <dieter@grafana.com> Co-authored-by: Oleg Zaytsev <mail@olegzaytsev.com> Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
2 years ago
})
// Write to the initial segment then checkpoint.
for i := 0; i < seriesCount; i++ {
ref := i + 100
series := enc.Series([]record.RefSeries{
{
Ref: chunks.HeadSeriesRef(ref),
Labels: labels.FromStrings("__name__", fmt.Sprintf("metric_%d", i)),
},
}, nil)
require.NoError(t, w.Log(series))
for j := 0; j < samplesCount; j++ {
inner := rand.Intn(ref + 1)
sample := enc.Samples([]record.RefSample{
{
Ref: chunks.HeadSeriesRef(inner),
T: int64(i),
V: float64(i),
},
}, nil)
require.NoError(t, w.Log(sample))
}
}
Add out-of-order sample support to the TSDB (#11075) * Introduce out-of-order TSDB support This implementation is based on this design doc: https://docs.google.com/document/d/1Kppm7qL9C-BJB1j6yb6-9ObG3AbdZnFUBYPNNWwDBYM/edit?usp=sharing This commit adds support to accept out-of-order ("OOO") sample into the TSDB up to a configurable time allowance. If OOO is enabled, overlapping querying are automatically enabled. Most of the additions have been borrowed from https://github.com/grafana/mimir-prometheus/ Here is the list ist of the original commits cherry picked from mimir-prometheus into this branch: - 4b2198d7ec47d50989b7c2df66b7b207c32f7f6e - 2836e5513f1bc591535a859f5d41154a75e7c6bc - 00b379c3a5b1ec3799699b6242f300a2b3ea30f0 - ff0dc757587cada63ca948d2d5eb00bf090d63e0 - a632c73352a7e39d60b445700beb47d691549c3e - c6f3d4ab339ab80bbbce74c9946237ced01f0509 - 5e8406a1d4a50d0052bbee83e28ca3b3371408aa - abde1e0ba128936b9eb0224ee1551e56216ebd4a - e70e7698897bb03860bee0467c733fa44e14c9bd - df59320886e03a555d379ac4b0b3130f661407e0 Co-authored-by: Jesus Vazquez <jesus.vazquez@grafana.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: Dieter Plaetinck <dieter@grafana.com> Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * gofumpt files Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Add license header to missing files Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix OOO tests due to existing chunk disk mapper implementation Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix truncate int overflow Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Add Sync method to the WAL and update tests Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * remove useless sync Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Update minOOOTime after truncating Head * Update minOOOTime after truncating Head Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix lint Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Add a unit test Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Load OutOfOrderTimeWindow only once per appender Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix OOO Head LabelValues and PostingsForMatchers Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix replay of OOO mmap chunks Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Remove unnecessary err check Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Prevent panic with ApplyConfig Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Run OOO compaction after restart if there is OOO data from WBL Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Apply Bartek's suggestions Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com> Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Refactor OOO compaction Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Address comments and TODOs - Added a comment explaining why we need the allow overlapping compaction toggle - Clarified TSDBConfig OutOfOrderTimeWindow doc - Added an owner to all the TODOs in the code Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Run go format Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix remaining review comments Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix tests Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Change wbl reference when truncating ooo in TestHeadMinOOOTimeUpdate Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> * Fix TestWBLAndMmapReplay test failure on windows Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Address most of the feedback Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Refactor the block meta for out of order Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix windows error Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix review comments Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com> Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: Dieter Plaetinck <dieter@grafana.com> Co-authored-by: Oleg Zaytsev <mail@olegzaytsev.com> Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
2 years ago
_, err = w.NextSegmentSync()
require.NoError(t, err)
_, err = Checkpoint(log.NewNopLogger(), w, 30, 31, func(x chunks.HeadSeriesRef) bool { return true }, 0)
require.NoError(t, err)
require.NoError(t, w.Truncate(32))
// Start read after checkpoint, no more data written.
_, _, err = Segments(w.Dir())
require.NoError(t, err)
wt := newWriteToMock(0)
watcher := NewWatcher(wMetrics, nil, nil, "", wt, dir, false, false)
go watcher.Start()
expectedSeries := seriesCount
retry(t, defaultRetryInterval, defaultRetries, func() bool {
[tsdb] re-implement WAL watcher to read via a "notification" channel (#11949) * WIP implement WAL watcher reading via notifications over a channel from the TSDB code Signed-off-by: Callum Styan <callumstyan@gmail.com> * Notify via head appenders Commit (finished all WAL logging) rather than on each WAL Log call Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix misspelled Notify plus add a metric for dropped Write notifications Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update tests to handle new notification pattern Signed-off-by: Callum Styan <callumstyan@gmail.com> * this test maybe needs more time on windows? Signed-off-by: Callum Styan <callumstyan@gmail.com> * does this test need more time on windows as well? Signed-off-by: Callum Styan <callumstyan@gmail.com> * read timeout is already a time.Duration Signed-off-by: Callum Styan <callumstyan@gmail.com> * remove mistakenly commited benchmark data files Signed-off-by: Callum Styan <callumstyan@gmail.com> * address some review feedback Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix missed changes from previous commit Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix issues from wrapper function Signed-off-by: Callum Styan <callumstyan@gmail.com> * try fixing race condition in test by allowing tests to overwrite the read ticker timeout instead of calling the Notify function Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix linting Signed-off-by: Callum Styan <callumstyan@gmail.com> --------- Signed-off-by: Callum Styan <callumstyan@gmail.com>
2 years ago
return wt.checkNumSeries() >= expectedSeries
})
watcher.Stop()
[tsdb] re-implement WAL watcher to read via a "notification" channel (#11949) * WIP implement WAL watcher reading via notifications over a channel from the TSDB code Signed-off-by: Callum Styan <callumstyan@gmail.com> * Notify via head appenders Commit (finished all WAL logging) rather than on each WAL Log call Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix misspelled Notify plus add a metric for dropped Write notifications Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update tests to handle new notification pattern Signed-off-by: Callum Styan <callumstyan@gmail.com> * this test maybe needs more time on windows? Signed-off-by: Callum Styan <callumstyan@gmail.com> * does this test need more time on windows as well? Signed-off-by: Callum Styan <callumstyan@gmail.com> * read timeout is already a time.Duration Signed-off-by: Callum Styan <callumstyan@gmail.com> * remove mistakenly commited benchmark data files Signed-off-by: Callum Styan <callumstyan@gmail.com> * address some review feedback Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix missed changes from previous commit Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix issues from wrapper function Signed-off-by: Callum Styan <callumstyan@gmail.com> * try fixing race condition in test by allowing tests to overwrite the read ticker timeout instead of calling the Notify function Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix linting Signed-off-by: Callum Styan <callumstyan@gmail.com> --------- Signed-off-by: Callum Styan <callumstyan@gmail.com>
2 years ago
require.Equal(t, expectedSeries, wt.checkNumSeries())
})
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
}
}
func TestReadCheckpointMultipleSegments(t *testing.T) {
pageSize := 32 * 1024
const segments = 1
const seriesCount = 20
const samplesCount = 300
for _, compress := range []CompressionType{CompressionNone, CompressionSnappy, CompressionZstd} {
t.Run(fmt.Sprintf("compress=%s", compress), func(t *testing.T) {
dir := t.TempDir()
wdir := path.Join(dir, "wal")
err := os.Mkdir(wdir, 0o777)
require.NoError(t, err)
enc := record.Encoder{}
w, err := NewSize(nil, nil, wdir, pageSize, compress)
require.NoError(t, err)
// Write a bunch of data.
for i := 0; i < segments; i++ {
for j := 0; j < seriesCount; j++ {
ref := j + (i * 100)
series := enc.Series([]record.RefSeries{
{
Ref: chunks.HeadSeriesRef(ref),
Labels: labels.FromStrings("__name__", fmt.Sprintf("metric_%d", i)),
},
}, nil)
require.NoError(t, w.Log(series))
for k := 0; k < samplesCount; k++ {
inner := rand.Intn(ref + 1)
sample := enc.Samples([]record.RefSample{
{
Ref: chunks.HeadSeriesRef(inner),
T: int64(i),
V: float64(i),
},
}, nil)
require.NoError(t, w.Log(sample))
}
}
}
require.NoError(t, w.Close())
// At this point we should have at least 6 segments, lets create a checkpoint dir of the first 5.
checkpointDir := dir + "/wal/checkpoint.000004"
err = os.Mkdir(checkpointDir, 0o777)
require.NoError(t, err)
for i := 0; i <= 4; i++ {
err := os.Rename(SegmentName(dir+"/wal", i), SegmentName(checkpointDir, i))
require.NoError(t, err)
}
wt := newWriteToMock(0)
watcher := NewWatcher(wMetrics, nil, nil, "", wt, dir, false, false)
watcher.MaxSegment = -1
// Set the Watcher's metrics so they're not nil pointers.
watcher.setMetrics()
lastCheckpoint, _, err := LastCheckpoint(watcher.walDir)
require.NoError(t, err)
err = watcher.readCheckpoint(lastCheckpoint, (*Watcher).readSegment)
require.NoError(t, err)
})
}
}
func TestCheckpointSeriesReset(t *testing.T) {
segmentSize := 32 * 1024
// We need something similar to this # of series and samples
// in order to get enough segments for us to checkpoint.
const seriesCount = 20
const samplesCount = 350
testCases := []struct {
compress CompressionType
segments int
}{
{compress: CompressionNone, segments: 14},
{compress: CompressionSnappy, segments: 13},
Tail the TSDB WAL for remote_write This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down. We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes. Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases. As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s). This changes also includes the following optimisations: - only marshal the proto request once, not once per retry - maintain a single copy of the labels for given series to reduce GC pressure Other minor tweaks: - only reshard if we've also successfully sent recently - add pending samples, latest sent timestamp, WAL events processed metrics Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype) Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes) Signed-off-by: Callum Styan <callumstyan@gmail.com>
6 years ago
}
for _, tc := range testCases {
t.Run(fmt.Sprintf("compress=%s", tc.compress), func(t *testing.T) {
dir := t.TempDir()
wdir := path.Join(dir, "wal")
err := os.Mkdir(wdir, 0o777)
require.NoError(t, err)
enc := record.Encoder{}
w, err := NewSize(nil, nil, wdir, segmentSize, tc.compress)
require.NoError(t, err)
defer func() {
require.NoError(t, w.Close())
}()
// Write to the initial segment, then checkpoint later.
for i := 0; i < seriesCount; i++ {
ref := i + 100
series := enc.Series([]record.RefSeries{
{
Ref: chunks.HeadSeriesRef(ref),
Labels: labels.FromStrings("__name__", fmt.Sprintf("metric_%d", i)),
},
}, nil)
require.NoError(t, w.Log(series))
for j := 0; j < samplesCount; j++ {
inner := rand.Intn(ref + 1)
sample := enc.Samples([]record.RefSample{
{
Ref: chunks.HeadSeriesRef(inner),
T: int64(i),
V: float64(i),
},
}, nil)
require.NoError(t, w.Log(sample))
}
}
_, _, err = Segments(w.Dir())
require.NoError(t, err)
[tsdb] re-implement WAL watcher to read via a "notification" channel (#11949) * WIP implement WAL watcher reading via notifications over a channel from the TSDB code Signed-off-by: Callum Styan <callumstyan@gmail.com> * Notify via head appenders Commit (finished all WAL logging) rather than on each WAL Log call Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix misspelled Notify plus add a metric for dropped Write notifications Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update tests to handle new notification pattern Signed-off-by: Callum Styan <callumstyan@gmail.com> * this test maybe needs more time on windows? Signed-off-by: Callum Styan <callumstyan@gmail.com> * does this test need more time on windows as well? Signed-off-by: Callum Styan <callumstyan@gmail.com> * read timeout is already a time.Duration Signed-off-by: Callum Styan <callumstyan@gmail.com> * remove mistakenly commited benchmark data files Signed-off-by: Callum Styan <callumstyan@gmail.com> * address some review feedback Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix missed changes from previous commit Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix issues from wrapper function Signed-off-by: Callum Styan <callumstyan@gmail.com> * try fixing race condition in test by allowing tests to overwrite the read ticker timeout instead of calling the Notify function Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix linting Signed-off-by: Callum Styan <callumstyan@gmail.com> --------- Signed-off-by: Callum Styan <callumstyan@gmail.com>
2 years ago
readTimeout = time.Second
wt := newWriteToMock(0)
watcher := NewWatcher(wMetrics, nil, nil, "", wt, dir, false, false)
watcher.MaxSegment = -1
go watcher.Start()
expected := seriesCount
retry(t, defaultRetryInterval, defaultRetries, func() bool {
[tsdb] re-implement WAL watcher to read via a "notification" channel (#11949) * WIP implement WAL watcher reading via notifications over a channel from the TSDB code Signed-off-by: Callum Styan <callumstyan@gmail.com> * Notify via head appenders Commit (finished all WAL logging) rather than on each WAL Log call Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix misspelled Notify plus add a metric for dropped Write notifications Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update tests to handle new notification pattern Signed-off-by: Callum Styan <callumstyan@gmail.com> * this test maybe needs more time on windows? Signed-off-by: Callum Styan <callumstyan@gmail.com> * does this test need more time on windows as well? Signed-off-by: Callum Styan <callumstyan@gmail.com> * read timeout is already a time.Duration Signed-off-by: Callum Styan <callumstyan@gmail.com> * remove mistakenly commited benchmark data files Signed-off-by: Callum Styan <callumstyan@gmail.com> * address some review feedback Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix missed changes from previous commit Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix issues from wrapper function Signed-off-by: Callum Styan <callumstyan@gmail.com> * try fixing race condition in test by allowing tests to overwrite the read ticker timeout instead of calling the Notify function Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix linting Signed-off-by: Callum Styan <callumstyan@gmail.com> --------- Signed-off-by: Callum Styan <callumstyan@gmail.com>
2 years ago
return wt.checkNumSeries() >= expected
})
[tsdb] re-implement WAL watcher to read via a "notification" channel (#11949) * WIP implement WAL watcher reading via notifications over a channel from the TSDB code Signed-off-by: Callum Styan <callumstyan@gmail.com> * Notify via head appenders Commit (finished all WAL logging) rather than on each WAL Log call Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix misspelled Notify plus add a metric for dropped Write notifications Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update tests to handle new notification pattern Signed-off-by: Callum Styan <callumstyan@gmail.com> * this test maybe needs more time on windows? Signed-off-by: Callum Styan <callumstyan@gmail.com> * does this test need more time on windows as well? Signed-off-by: Callum Styan <callumstyan@gmail.com> * read timeout is already a time.Duration Signed-off-by: Callum Styan <callumstyan@gmail.com> * remove mistakenly commited benchmark data files Signed-off-by: Callum Styan <callumstyan@gmail.com> * address some review feedback Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix missed changes from previous commit Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix issues from wrapper function Signed-off-by: Callum Styan <callumstyan@gmail.com> * try fixing race condition in test by allowing tests to overwrite the read ticker timeout instead of calling the Notify function Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix linting Signed-off-by: Callum Styan <callumstyan@gmail.com> --------- Signed-off-by: Callum Styan <callumstyan@gmail.com>
2 years ago
require.Eventually(t, func() bool {
return wt.checkNumSeries() == seriesCount
}, 10*time.Second, 1*time.Second)
_, err = Checkpoint(log.NewNopLogger(), w, 2, 4, func(x chunks.HeadSeriesRef) bool { return true }, 0)
require.NoError(t, err)
err = w.Truncate(5)
require.NoError(t, err)
_, cpi, err := LastCheckpoint(path.Join(dir, "wal"))
require.NoError(t, err)
err = watcher.garbageCollectSeries(cpi + 1)
require.NoError(t, err)
watcher.Stop()
// If you modify the checkpoint and truncate segment #'s run the test to see how
// many series records you end up with and change the last Equals check accordingly
// or modify the Equals to Assert(len(wt.seriesLabels) < seriesCount*10)
[tsdb] re-implement WAL watcher to read via a "notification" channel (#11949) * WIP implement WAL watcher reading via notifications over a channel from the TSDB code Signed-off-by: Callum Styan <callumstyan@gmail.com> * Notify via head appenders Commit (finished all WAL logging) rather than on each WAL Log call Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix misspelled Notify plus add a metric for dropped Write notifications Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update tests to handle new notification pattern Signed-off-by: Callum Styan <callumstyan@gmail.com> * this test maybe needs more time on windows? Signed-off-by: Callum Styan <callumstyan@gmail.com> * does this test need more time on windows as well? Signed-off-by: Callum Styan <callumstyan@gmail.com> * read timeout is already a time.Duration Signed-off-by: Callum Styan <callumstyan@gmail.com> * remove mistakenly commited benchmark data files Signed-off-by: Callum Styan <callumstyan@gmail.com> * address some review feedback Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix missed changes from previous commit Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix issues from wrapper function Signed-off-by: Callum Styan <callumstyan@gmail.com> * try fixing race condition in test by allowing tests to overwrite the read ticker timeout instead of calling the Notify function Signed-off-by: Callum Styan <callumstyan@gmail.com> * fix linting Signed-off-by: Callum Styan <callumstyan@gmail.com> --------- Signed-off-by: Callum Styan <callumstyan@gmail.com>
2 years ago
require.Eventually(t, func() bool {
return wt.checkNumSeries() == tc.segments
}, 20*time.Second, 1*time.Second)
})
}
}
func TestRun_StartupTime(t *testing.T) {
const pageSize = 32 * 1024
const segments = 10
const seriesCount = 20
const samplesCount = 300
for _, compress := range []CompressionType{CompressionNone, CompressionSnappy, CompressionZstd} {
t.Run(string(compress), func(t *testing.T) {
dir := t.TempDir()
wdir := path.Join(dir, "wal")
err := os.Mkdir(wdir, 0o777)
require.NoError(t, err)
enc := record.Encoder{}
w, err := NewSize(nil, nil, wdir, pageSize, compress)
require.NoError(t, err)
for i := 0; i < segments; i++ {
for j := 0; j < seriesCount; j++ {
ref := j + (i * 100)
series := enc.Series([]record.RefSeries{
{
Ref: chunks.HeadSeriesRef(ref),
Labels: labels.FromStrings("__name__", fmt.Sprintf("metric_%d", i)),
},
}, nil)
require.NoError(t, w.Log(series))
for k := 0; k < samplesCount; k++ {
inner := rand.Intn(ref + 1)
sample := enc.Samples([]record.RefSample{
{
Ref: chunks.HeadSeriesRef(inner),
T: int64(i),
V: float64(i),
},
}, nil)
require.NoError(t, w.Log(sample))
}
}
}
require.NoError(t, w.Close())
wt := newWriteToMock(0)
watcher := NewWatcher(wMetrics, nil, nil, "", wt, dir, false, false)
watcher.MaxSegment = segments
watcher.setMetrics()
startTime := time.Now()
err = watcher.Run()
require.Less(t, time.Since(startTime), readTimeout)
require.NoError(t, err)
})
}
}
func TestRun_AvoidNotifyWhenBehind(t *testing.T) {
const pageSize = 32 * 1024
const segments = 10
const seriesCount = 20
const samplesCount = 300
// This test can take longer than intended to finish in cloud CI.
readTimeout := 10 * time.Second
for _, compress := range []CompressionType{CompressionNone, CompressionSnappy, CompressionZstd} {
t.Run(string(compress), func(t *testing.T) {
dir := t.TempDir()
wdir := path.Join(dir, "wal")
err := os.Mkdir(wdir, 0o777)
require.NoError(t, err)
enc := record.Encoder{}
w, err := NewSize(nil, nil, wdir, pageSize, compress)
require.NoError(t, err)
var wg sync.WaitGroup
// add one segment initially to ensure there's a value > 0 for the last segment id
for i := 0; i < 1; i++ {
for j := 0; j < seriesCount; j++ {
ref := j + (i * 100)
series := enc.Series([]record.RefSeries{
{
Ref: chunks.HeadSeriesRef(ref),
Labels: labels.FromStrings("__name__", fmt.Sprintf("metric_%d", i)),
},
}, nil)
require.NoError(t, w.Log(series))
for k := 0; k < samplesCount; k++ {
inner := rand.Intn(ref + 1)
sample := enc.Samples([]record.RefSample{
{
Ref: chunks.HeadSeriesRef(inner),
T: int64(i),
V: float64(i),
},
}, nil)
require.NoError(t, w.Log(sample))
}
}
}
wg.Add(1)
go func() {
defer wg.Done()
for i := 1; i < segments; i++ {
for j := 0; j < seriesCount; j++ {
ref := j + (i * 100)
series := enc.Series([]record.RefSeries{
{
Ref: chunks.HeadSeriesRef(ref),
Labels: labels.FromStrings("__name__", fmt.Sprintf("metric_%d", i)),
},
}, nil)
require.NoError(t, w.Log(series))
for k := 0; k < samplesCount; k++ {
inner := rand.Intn(ref + 1)
sample := enc.Samples([]record.RefSample{
{
Ref: chunks.HeadSeriesRef(inner),
T: int64(i),
V: float64(i),
},
}, nil)
require.NoError(t, w.Log(sample))
}
}
}
}()
wt := newWriteToMock(time.Millisecond)
watcher := NewWatcher(wMetrics, nil, nil, "", wt, dir, false, false)
watcher.MaxSegment = segments
watcher.setMetrics()
startTime := time.Now()
err = watcher.Run()
wg.Wait()
require.Less(t, time.Since(startTime), readTimeout)
require.NoError(t, err)
require.NoError(t, w.Close())
})
}
}