- The wait function optionally calls IsDialogMessage() if a dialog
handle is specified. For other customizations the caller can
install a WH_MSGFILTER hook. The hook will get called with
nCode = MSGF_OVPN_WAIT and lParam = &msg.
- Use this in place of Sleep in main.c, scripts.c and PLAP dll.
Fixes#576
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Persistent connections have openvpn.exe daemon started
external to the GUI (e.g., by the automatic service).
This patch adds support for attaching to the management
i/f of such daemons from the GUI and control the connection.
The GUI never stops or starts the openvpn.exe process in this
case. Instead, connect and disconnect buttons signal the
management interface of a running openvpn.exe process to start
the tunnel by attaching to mgmt i/f and sending hold-release if
needed or stop it and wait in management-hold state
(see DisconnectDaemon()).
When the GUI process exits, persistent connections are left in their
current state using DetachOpenVPN().
No connections are marked as persistent as yet. That is done
in a following commit.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Use a custom message to pass state change notification from OpenVPN
to all top level windows in the thread. Currently only the pending auth
dialog responds to this message by closing when the state changes.
The state change could be due to timeout, errors or success via
out-of-band authentication which makes the dialog no longer valid.
The case of CR_TEXT messages that do not require a response is handled
in the next commit.
See also issue #440https://github.com/OpenVPN/openvpn-gui/issues/440
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Change the way echo-msg window is update (thread safety).
When new echo-msg content is available for display, update the window
from the thread owning it by sending a message to it.
A blocking SendMessage (with a timeout) is used, as the window
needs access to the config's echo-msg buffer which is cleared
on return from this this call.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
The help message is truncated in some languages with
recent increases in textual information in the
usage string. Eg., see "openvpn-gui --help" with
Dutch selected as the language where the text
is about 2300 characters while the buffer is only 2048.
The window still fits on typical screen sizes, so
just increase the buffer size to 3000.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Add an new command 'rescan' that may be sent to a running
instance of the GUI to force it rescan the config folders.
Use case: with an instance of the is GUI running, one can
manually copy a config file to the config folder and start
it using "openvpn-gui --command rescan" followed by
"openvpn-gui --command connect foo"
v2: The calls to rebuild config file list and recreate
menus is refactored into a function.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
This adds msvc project files and tiny code changes,
required to build this project with msvc.
Microsoft resource compiler, unlike mingw's windres,
doesn't fully support macros and multi-line strings,
so I had to create a separate resource file for msvc.
Signed-off-by: Lev Stipakov <lev@openvpn.net>
- Group all configs in a subdirectory with directory name
as the label.
- If any connection is active, newly found configs are
added to the root group to keep the logic simple.
- Directory hierarchy is scanned up to a depth of 4: i.e.,
config_dir and global_config_dir and its subdirectories
up to 3 levels down.
Only support for scanning configs and attaching group labels
is added here. Rendering the nested menu is the subject of
a later commit.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- New option --command <action> <params> to send commands to
a running instance of openvpn-gui.exe
Supported actions are
connect, disconnect, reconnect
each of which takes the name of the config (with or without the
extension .ovpn) as a parameter;
disconnect_all, exit
which take no parameter and
silent_connection
which takes an optional parameter = 0 or 1 (1 is the default)
Examples: with the gui running, start a new instance as
openvpn-gui.exe --command disconnect myvpn : ask running instance
to disconnect myvpn if connected
openvpn-gui.exe --command status myvpn : ask running instance
to show the status window for myvpn if available
openvpn-gui.exe --command disconnect_all : ask running instance
to disconnect all active connections
- The second instance exits after issuing a SendMessage to the
already running instance. If no action is specified, the running
instance is notified to show a balloon to alert the user
- These messages may also be sent from scripts as COPYDATA messages
with the wData element specifying the action to execute and lpData
a pointer to the parameter. The dwData param must be one of
WM_OVPN_xxx with xxx = START, STOP, RESTART, STOPALL, EXIT or
SILENT. See main.h for their values.
v2: Bug fixes based on test reports from larson0815
here: https://github.com/selvanair/openvpn-gui/issues/5
and cron410 here: https://github.com/OpenVPN/openvpn-gui/issues/104
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- Increase the buffer size used to load the usage string to 2048
chars (defined by USAGE_BUF_SIZE in main.h)
- Make GetGUILanguage() visible outside localization.c
Trac: #833
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- Set dpi-awareness to true in the manifest (i.e., "system-dpi aware")
- Check system dpi and scale and/or position widgets and windows
that depend on the system dpi (only components within the status
window are affected).
Note: Declaring dpi awareness eliminates automatic rescaling of
windows that causes blurred text on high dpi monitors.
Windows 8.1 and later allow per monitor dpi setting which is
not handled here.
Option ediitng dialogs are in two tabs: General and Advanced.
Proxy related options are left in the proxy tab. Options
config_dir, config_ext, log_dir, script timeouts and
service-only flag are in the Advanced tab. All other more commonly
used flags and options are in the General tab.
- As options are editable, save values in registry only when they differ
from the default values. This leaves the registry clean and makes changing
options and their defaults during updates easier.
- Entries for config_dir and log_dir must be absolute paths.
Environemental variables such as %PROFILEDIR% may be used
to construct these.
- Empty config_dir, config_ext and log_dir entries are silently
ignored (i.e., the current values are left unchanged).
- Store all numeric and boolean parameters in registry as DWORD instead of
strings.
- On startup, the default parameters are loaded, then the registry is read
and finally command-line parameters parsedi.
- Out of range script timeout values in registry truncated with a
warning instead of fatal error. This allows the user to access the
settings dialog and make corrections.
- Save proxy and language settings under the same
HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings.
- Save the current version of the GUI in regsitry so that updates
can be detected and any needed registry cleanup done.
- If no version info is present in the registry any values in OpenVPN-GUI
key in HKCU are deleted for a clean start as this is the first version
to save registry values in HKCU. Language and proxy data if present
under Nilings is migrated.
Note: new controls in the General tab and newly added Advanced tab dialog
are copied to all language files from the English version. These need to
be translated.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- Username and, optionally, password as well as the private
key passphrase are saved in config-specific registry keys
- All saved data are kept encrypted using DPAPI
- The passphrase dialog is skipped if a valid saved private
key password is available. However, the user-auth dialog
is always presented, prefilled with the saved username
and password.
Note: A text string "Save password" is added to three dialogs
in all language resource files. Additional text with ids
IDS_MENU_CLEARPASS and IDS_NFO_DELETE_PASS are added to the
STRINGTABLE only in the English language resource file.
All these need translations.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
When a connection is attempted using a config in a location
that would fail, offer an option to add the user to the "OpenVPN
Administrators" group. This is done using shell-execute which will
show a UAC prompt for elevation. If it fails (due to user chooses
NO or the UAC dialog fails) the connection is not started.
v2 Changes
- Rebase to master
- Automaticlaly add the admin group if it doesn't exist
- Allow unicode strings in debug output
- Use domain\username to identify user
- Fix the PrintDebug macro
Minor changes based on user feedback
- Bring the window back to foreground after UAC prompt completion
- Show a message if another connection is tried during authorization
- Do not add user to ovpn_admin_group if it is same as the built-in admin group
Signed-off-by: Selva Nair <selva.nair@gmail.com>
[openvpn_config.c:194]: (style) The function 'ConfigFileOptionExist' is never used.
[localization.c:299]: (style) The function 'LocalizedDialogBox' is never used.
[main.c:549]: (style) The function 'PrintErrorDebug' is never used.
[main.c:583]: (style) The function 'init_security_attributes_allow_all' is never used.
[misc.c:180]: (style) The function 'wcseq' is never used.
Selva Nair