There is no point in localizing "OpenVPN GUI"
tray icon tooltip. Remove it from resources and
replace with PACKAGE_NAME define.
Signed-off-by: Lev Stipakov <lev@openvpn.net>
Also remove related variables from configure.ac
as those are unused since we updated resources to be
MSVC compliant.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- ShellExecute with runas is used to elevate
- This Option is hidden if PLAP dll is not found in the
install_path bin folder
- Depends on the presence of openvpn-plap-install.reg
and openvpn-plap-uninstall.reg in the install-path bin
folder.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
If '--management' option cannot be parsed in the config file of a
persistent profile (due to missing option, unreadable password etc.),
connecting it from the GUI menu fails.
In such cases show an error message instead of silently failing.
The message is shown only during manual connect attempts,
not during auto-connect or resume.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- Remove service-only mode (start/stop service) which has not been in
use since we moved to running the GUI as limited user.
Also its not very useful as it does not allow any control of
service-started daemons
- Keep CheckServiceStatus and always check the status of
automatic service.
The status of the service will be used to toggle supporting
control of persistent connections started by the service.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Persistent connections have openvpn.exe daemon started
external to the GUI (e.g., by the automatic service).
This patch adds support for attaching to the management
i/f of such daemons from the GUI and control the connection.
The GUI never stops or starts the openvpn.exe process in this
case. Instead, connect and disconnect buttons signal the
management interface of a running openvpn.exe process to start
the tunnel by attaching to mgmt i/f and sending hold-release if
needed or stop it and wait in management-hold state
(see DisconnectDaemon()).
When the GUI process exits, persistent connections are left in their
current state using DetachOpenVPN().
No connections are marked as persistent as yet. That is done
in a following commit.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
This extended style makes the window topmost in z-order.
We currently set this for the user-auth and private-key
passphrase dialogs, but useful for any dialog that may popup
without user interaction.
(Eg., challenge response during a server-initiated restart
or reneg).
Trac: #1465
Signed-off-by: Selva Nair <selva.nair@gmail.com>
This adds optional support for using OpenVPN3 client
as an alternative to openvpn2.
Just replacing one client with another will not work:
- OpenVPN3 doesn't use interactive service, it uses
"agent" service with completely different protocol. OpenVPN GUI
needs to talk to agent using HTTP and JSON.
- OpenVPN3 management interface realtime notifications must be
explicitly turned on in order for GUI to work.
To enable using openvpn3:
- use any of *-ovpn3 presets (cmake build system)
- ./configure --enable-ovpn3 (mingw)
To switch betweet openvpn2 and openvpn3, see "OpenVPN Engine"
radiobutton group in Settings -> Advanced dialog.
OnReady() implementation was slighly changed - "log all on"
replaced with "log on all" - according to management interface
documentation this is the right way to do it, and also OpenVPN3
only supports "on all" order.
Management interface - enabled OpenVPN3 client (omiclient.exe) and
agent (ovpnagent.exe) are now part of openvpn3 repo.
Co-authored-by: Christopher Ng <facboy@gmail.com>
Signed-off-by: Christopher Ng <facboy@gmail.com>
Signed-off-by: Lev Stipakov <lev@openvpn.net>
* Provide more space for challenge dialog text
We do use a re-sizeable dialog box for dynamic challenge-response
to cater for potentially long lines of challenge text. But the
space specified for the widget is enough for only a single short line
(~60 characters) of text.
Increase the horizontal and vertical space to allow for up to
two lines of ~120 characters per line.
The default size of the Window is not changed. But it is
automatically resized if the space required for the text
is longer than the window width minus some margin. The max
horizontal size of the window is capped at 640 nominal pixels
as longer text will be wrapped in to two lines.
Github issue #468
Signed-off-by: Selva Nair <selva.nair@gmail.com>
%S --> %hs in wide format strings, %ls otherwise
%s --> %ls in wide format strings, unchanged otherwise
%c --> %lc in wide format strings
Resource files together have about 970 lines affected and
were edited by looping through all with
sed -i 's/%S/%hs/g' $file
sed -i 's/%s/%ls/g' $file
All other files were manually changed (about 85 lines).
Recent versions of mingw-w64 implicitly turns on __USE_MINGW_ANSI_STDIO
if _GNU_SOURCE, _XOPEN_SOURCE etc are defined (which we do usei).
This breaks non-standard spec such as %S. Anyway, we have been
gradually getting rid of those.
MSVC builds should not be affected.
v2: multiple occurrences in same line was missed in v1 (/g missing in
sed expression). Fixed.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
This is the first patch from series which implemets
importing profile from URL, currently implemented
by OpenVPN Access Server.
Move "Import from file" menu item under new "Import"
item. Add "Import from AS..." item under "Import", which
opens new profile import dialog.
Signed-off-by: Lev Stipakov <lev@openvpn.net>
- Remove intermediate quotes in continued lines
- Remove macro substitutions in strings
- Split two long LTEXT (>256 characters) into two
All changes autogenerated using a sed script here
https://gist.github.com/selvanair/ae78c29869d7c1d15abcb909f04676c6
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Describe recently added command line options:
- iservice_admin
- disable_popup_messages
- popup_mute_interval
- management_port_offset
Added the default English text to all langauage files.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
We didn't use interactive service when gui was running
under admin because of some privilege escalation vulnerability in Vista.
Apparently this issue doesn't exist on Win7 and newer versions so
it is safe to use iservice on those systems.
Introduce "Always use interactive service" option,
which is "on" by default. This should enable users,
who by various reasons run gui as admin, use Wintun.
When gui is running as admin and interactive service
cannot be started or not installed, warn that wintun will not work.
Signed-off-by: Lev Stipakov <lev@openvpn.net>
- All missing strings are copied from the English version
which is the default.
- Description of "--command cmd" is also copied from the
English version where missing.
- Some whitespace changes for consistent formatting of all files
No user-visible changes except for the --help output
which will now include a description of the "--command cmd"
option in English when a translation is not available.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- This checkbox is inactive and does nothing.
The service-only usage can be still activated using the command
line option --service_only or by editing the registry, but its
not a recommended use case for GUI version 11.0 and above.
See also issue: #264
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- Show the assigned IP numbers, traffic stats (bytes in/out), and
the GUI and OpenVPN core versions on the status window.
Note: IDS_TXT_BYTECOUNT = "Bytes in: %s out %s" needs translation.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- Make the OK button appear highlighted as the default action so that
the user can press enter and submit the form. This also gives a clearer
indication of the default action when automatic submission of saved
username/password activates.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- "Wrong username or password" message shown in the auth userpass dialog after
an auth failure
- "Wrong password" message shown in the private key password dialog after a
password failure.
These message texts are colored red by default (TODO: make the color customizable)
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- Copy updates to copyright by commit 32c31ab942 in
Englishc to all other language files.
- Change version displayed in About page to the form
"a.b.c.d"
- General settings dialog is incomplete in chinese:
copy from English version.
- Add the word "OpenVPN" in the About page of Norwegian
mistakenly removed by commit d81b93d487..
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- Add a base64 decode function using Windows CyptoAPI
- Move multibyte to widechar conversions to a function
- Add config name to caption of password dialogs to help user
identify the request
- Add new dialog template for generic password/PIN requests
and use it to handle dynamic challenge
Note 1: if dynamic challenge response verification fails, an auth-failed
message is returned by the server causing the GUI to clear any saved
password even if the user-auth dialog itself succeeeded.
Note 2: Dialog template ID_DLG_CHALLENGE_RESPONSE added to language
files may require translation.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Option ediitng dialogs are in two tabs: General and Advanced.
Proxy related options are left in the proxy tab. Options
config_dir, config_ext, log_dir, script timeouts and
service-only flag are in the Advanced tab. All other more commonly
used flags and options are in the General tab.
- As options are editable, save values in registry only when they differ
from the default values. This leaves the registry clean and makes changing
options and their defaults during updates easier.
- Entries for config_dir and log_dir must be absolute paths.
Environemental variables such as %PROFILEDIR% may be used
to construct these.
- Empty config_dir, config_ext and log_dir entries are silently
ignored (i.e., the current values are left unchanged).
- Store all numeric and boolean parameters in registry as DWORD instead of
strings.
- On startup, the default parameters are loaded, then the registry is read
and finally command-line parameters parsedi.
- Out of range script timeout values in registry truncated with a
warning instead of fatal error. This allows the user to access the
settings dialog and make corrections.
- Save proxy and language settings under the same
HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings.
- Save the current version of the GUI in regsitry so that updates
can be detected and any needed registry cleanup done.
- If no version info is present in the registry any values in OpenVPN-GUI
key in HKCU are deleted for a clean start as this is the first version
to save registry values in HKCU. Language and proxy data if present
under Nilings is migrated.
Note: new controls in the General tab and newly added Advanced tab dialog
are copied to all language files from the English version. These need to
be translated.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- Username and, optionally, password as well as the private
key passphrase are saved in config-specific registry keys
- All saved data are kept encrypted using DPAPI
- The passphrase dialog is skipped if a valid saved private
key password is available. However, the user-auth dialog
is always presented, prefilled with the saved username
and password.
Note: A text string "Save password" is added to three dialogs
in all language resource files. Additional text with ids
IDS_MENU_CLEARPASS and IDS_NFO_DELETE_PASS are added to the
STRINGTABLE only in the English language resource file.
All these need translations.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Lev Stipakov