In some cases the service may take a while to startup openvpn.exe,
causing connection to the management interface to timeout. This could
leave behind the OpenVPN process if/when it eventually starts up.
(Trac 905, 1050).
As errors in starting up the OpenVPN daemon are independently
handled, its better to keep retrying the management interface connection
until aborted due to errors or by the user.
- On timeout, log a message on the status window and retry the
management interface connection
- Eliminate the timed-out state that is no longer used
- Call StopOpenVPN() before abort so that OpenVPN daemon
is not left running in case it starts up later.
- In the unlikely event that OpenManagement() fails, show an error
- User can abort by pressing disconnect
A "retrying.." message is logged on to the status window every
15 seconds.
See Trac: #905, #1050
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- Set env variables such as OPENSSL_CONF and OPENSSL_MODULES
- Replace deprecated initialization (since OpenSSL 1.1.0)
by OpenSSL_init_crypto()
Signed-off-by: Selva Nair <selva.nair@gmail.com>
The user is prompted with a message showing the config
name that will be imported. The user can accept or cancel
the operation.
If the user was already prompted for over-write permission
because a config with the same name exists, no further dialog
is shown.
Import using the menu (Import File...) is not affected.
Rationale:
We want to set "Import" as the default verb for the context
menu of .ovpn files. This will allow import of configs by
double-click. Also when .ovpn file is downloaded using a browser,
setting the default bowser action to "open" will result in an import.
In such cases a silent import action could be surprising, and a
prompt showing what is being imported could provide a better UX.
On the flip-side, the prompt/dialog will also be shown when import
is done from the context menu of .ovpn by "right click and
choose import" or when "openvpn-gui.exe --import foo"
or "openvpn-gui.exe --command import foo" is executed. As import
is an action that does not result in an immediately visible result
(unlike, say, edit or print), a prompt requiring user action is of
some value even in these cases. At worst it's a minor annoyance.
See also: https://github.com/OpenVPN/openvpn-build/pull/227
and discussions there-in
Signed-off-by: Selva Nair <selva.nair@gmail.com>
%S --> %hs in wide format strings, %ls otherwise
%s --> %ls in wide format strings, unchanged otherwise
%c --> %lc in wide format strings
Resource files together have about 970 lines affected and
were edited by looping through all with
sed -i 's/%S/%hs/g' $file
sed -i 's/%s/%ls/g' $file
All other files were manually changed (about 85 lines).
Recent versions of mingw-w64 implicitly turns on __USE_MINGW_ANSI_STDIO
if _GNU_SOURCE, _XOPEN_SOURCE etc are defined (which we do usei).
This breaks non-standard spec such as %S. Anyway, we have been
gradually getting rid of those.
MSVC builds should not be affected.
v2: multiple occurrences in same line was missed in v1 (/g missing in
sed expression). Fixed.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
ParseUrl extended to parse generic URLs and parse
the path. DownloadProfile() function re-factored
for reuse with generic URL.
Also:
- INTERNET_FLAG_RELOAD added to the request
call to force reloading the data from server instead
of using possibly cached data.
- Input box for URL extended in length to about
50 characters wide.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Import a config file from command line as
`openvpn-gui.exe --command import <file-path>`
The command is send to a running instance if any.
Otherwise the GUI extecutable is started and
the import processed.
`openvpn-gui --import <file-path>`
is interpreted as the same command.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Factor out importing part (everything except file open dialog)
into separate function, which can be used when importing
profile from URL.
Signed-off-by: Lev Stipakov <lev@openvpn.net>
This is the first patch from series which implemets
importing profile from URL, currently implemented
by OpenVPN Access Server.
Move "Import from file" menu item under new "Import"
item. Add "Import from AS..." item under "Import", which
opens new profile import dialog.
Signed-off-by: Lev Stipakov <lev@openvpn.net>
This adds support for web-based extra authentication, which may be
used by OpenVPN Cloud. When enabled and client sends IV_SSO=openurl,
server pushes Info command OPEN_URL:<url>. The client opens that URL and
user authenticates.
Signed-off-by: Lev Stipakov <lev@openvpn.net>
By some reasons Release build ignores _INC_MATH and includes math.h,
which conflicts with our own log definition. Rename it to log_.
While on it, also rename other enum names for consistency.
Signed-off-by: Lev Stipakov <lev@openvpn.net>
We currently use WM_COMMAND message which is delivered with the
ID of the menu item requiring a unique ID for every command
(connect, disconnect etc..) for each connection profile. Instead,
use WM_MENUCOMMAND so that the message delivers a handle to the
menu and the position index of the menu item.
Connection menu array is now dynamically allocated. Yet, there
is still a limitation on the number of configs as the config
index + mgmt_port_offset must be < 65536 to be usable as a port
number. The error message shown for "too many configs" is reworded.
(English language file only).
Note: The current way of selecting the management port based on the
index of the config file increases chances of port conflicts
when the number of configs is large. It could be useful to change
this logic but that is beyond the cope of this PR.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Change the way echo-msg window is update (thread safety).
When new echo-msg content is available for display, update the window
from the thread owning it by sending a message to it.
A blocking SendMessage (with a timeout) is used, as the window
needs access to the config's echo-msg buffer which is cleared
on return from this this call.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- Add a message box that support appending messages with
a title formatted at a larger font and a text
displayed in the default font.
- A global instance of the message box is used to
display messages from all profiles.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Process four new echo commands to construct messages to be
displayed to the user:
echo msg message-text
echo msg-n message-text
echo msg-window message-title
echo msg-notify message-title
Note: All rules of push and echo processing apply and determine
what is received as echo commands by the GUI. In addition,
'url-encoded' characters (% followed by two hex digits) are
decoded and displayed.
The message is constructed in the GUI by concatenating the text
specified in one or more "echo msg text" or "echo msg-n text"
commands. In case of "echo msg text" text is appended with a new
line. An empty text in this case will
just add a new line.
The message ends and gets displayed when one of the following
are receieved:
echo msg-window title
echo msg-notify title
where "title" becomes the title of the message window. In case of
msg-window, a modeless window shows the message, in the latter case
a notification balloon is shown.
Example: when pushed from the server:
push "echo msg I say let the world go to hell%2C"
push "echo msg I must have my cup of tea."
push "echo msg-window Notes from the underground"
will display a modeless window with title
"Notes from the underground" and a two line body
--
I say let the world go to hell,
I must have my cup of tea.
--
Note that the message itself is not quoted in the above examples
and so it relies on the server's option-parser combining
individual words into a space separated string. Number of words
on a line is limited by the maximum number of parameters allowed
in openvpn commands (16). This limitation may be avoided by quoting
the text that follows so that the option parser sees it as one
parameter.
The comma character is not allowed in pushed strings, so
it has to be sent encoded as %2C as shown above.
Such encoding of arbitrary bytes is suppored. For example,
newlines may be embedded as %0A, though discouraged. Instead
use multiple "echo msg" commands to separate lines by new line.
An example with embedded spaces and multiple lines concatenated
without a new line in between (note use of single quotes):
push "echo msg-n I swear to you gentlemen%2C that to be"
push "echo msg-n ' overly conscious is a sickness%2C ' "
push "echo msg-n a real%2C thorough sickness."
push "echo msg-notify Quote of the Day"
will show up as a notification that displays for an
OS-dependent interval as:
--
Quote of the Day
I swear to you gentlemen, that to be overly conscious
is a sickness, a real, thorough sickness.
--
where the location of the line break is automatically determined
by the notification API and is OS version-dependent.
Commands like "echo msg ..." in the config file are also
processed the same way. It gets displayed when the GUI connects
to the management interface and receives all pending echo.
Pushed message(s) get displayed when the client daemon
processes push-reply and passes on echo directives to the
GUI.
TODO: The actual window that displays the messages is
implemented in the next commit.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
We didn't use interactive service when gui was running
under admin because of some privilege escalation vulnerability in Vista.
Apparently this issue doesn't exist on Win7 and newer versions so
it is safe to use iservice on those systems.
Introduce "Always use interactive service" option,
which is "on" by default. This should enable users,
who by various reasons run gui as admin, use Wintun.
When gui is running as admin and interactive service
cannot be started or not installed, warn that wintun will not work.
Signed-off-by: Lev Stipakov <lev@openvpn.net>
- Prompt the user for permission if import may overwrite
an existing config.
- Also raise an error if the import file source matches the
global or local config directory. Reimporting a config on to
itself is not supported. This also avoids ERROR_SHARING_VIOLATION
in CopyFile() when source and destination are the same.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Add an new command 'rescan' that may be sent to a running
instance of the GUI to force it rescan the config folders.
Use case: with an instance of the is GUI running, one can
manually copy a config file to the config folder and start
it using "openvpn-gui --command rescan" followed by
"openvpn-gui --command connect foo"
v2: The calls to rebuild config file list and recreate
menus is refactored into a function.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
found by cppcheck
[main.c:457] -> [main.c:457]: (warning) Either the condition 'copy_data->dwData==(WM_APP+15)&&c->hwndStatus&&c' is redundant or there is possible null pointer dereference: c.
The number of configs is now unlimited. But there is a limit
of 2^16 menu items which permits only about 2^12 configs to be
displayed in the menu. A warning is shown if the number of
configs exceeds this value.
For a responsive menu keep the number of configs under ~1000.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- Group all configs in a subdirectory with directory name
as the label.
- If any connection is active, newly found configs are
added to the root group to keep the logic simple.
- Directory hierarchy is scanned up to a depth of 4: i.e.,
config_dir and global_config_dir and its subdirectories
up to 3 levels down.
Only support for scanning configs and attaching group labels
is added here. Rendering the nested menu is the subject of
a later commit.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
When openvpn is run with --help option it pops up a help
message and exits when that window is closed. Such instances
cannot accept any commands and should not be treated as a
running instance.
Fix by
(i) When run with --help, promptly release the semaphore used
to restrict to a single running instance.
(ii) Wait for a short interval (200 msec) before timing out of
locking the semaphore. This helps avoid race conditions.
While at it also make sure the semaphore is released and closed
on exit.
Fixes issue: #237
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Treat '--connect foo.ovpn' and '--connect foo' as the same. This matches
with the behaviour of '--command connect foo'.
Note: the argument is first compared against config file names and then
against config names.
Based on comment by larson0815 here:
https://github.com/selvanair/openvpn-gui/issues/5
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- New option --command <action> <params> to send commands to
a running instance of openvpn-gui.exe
Supported actions are
connect, disconnect, reconnect
each of which takes the name of the config (with or without the
extension .ovpn) as a parameter;
disconnect_all, exit
which take no parameter and
silent_connection
which takes an optional parameter = 0 or 1 (1 is the default)
Examples: with the gui running, start a new instance as
openvpn-gui.exe --command disconnect myvpn : ask running instance
to disconnect myvpn if connected
openvpn-gui.exe --command status myvpn : ask running instance
to show the status window for myvpn if available
openvpn-gui.exe --command disconnect_all : ask running instance
to disconnect all active connections
- The second instance exits after issuing a SendMessage to the
already running instance. If no action is specified, the running
instance is notified to show a balloon to alert the user
- These messages may also be sent from scripts as COPYDATA messages
with the wData element specifying the action to execute and lpData
a pointer to the parameter. The dwData param must be one of
WM_OVPN_xxx with xxx = START, STOP, RESTART, STOPALL, EXIT or
SILENT. See main.h for their values.
v2: Bug fixes based on test reports from larson0815
here: https://github.com/selvanair/openvpn-gui/issues/5
and cron410 here: https://github.com/OpenVPN/openvpn-gui/issues/104
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- This works the same way as restart button in the status window
but is more conveniently accessible from the tray menu.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- A new registry HKLM\Software\OpenVPN\disable_save_passwords
(32 bit DWORD value) may be set to a non-zero value to
disable password saving by users. Applies to both auth and
private key passwords. Usernames are always saved.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Support the following echo commands
- "echo forget-passwords": delete passwords internally saved by the GUI
but do not disable the password save feature. Useful when pushed
from the server so that it gets processed after authentication. Also see
management-notes.txt in openvpn docs.
- "echo save-passwords": enables private-key and auth-user-pass passwords
to be saved. Will be effective at startup only if present in the config
file. If pushed from the server, will get used for subsequent
password prompts. Essentially this has the effect of presenting the password
dialogs to the user with save-password checkbox selected. The user may still
uncheck it during the dialog.
Note: echo commands are processed as and when they are received and in the order
received.
TODO: support for "echo setenv name var", "echo disable-save-passwords" etc..
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Warnings dsabled if silent_connection is true
- interactive service is not installed or not running
- duplicate configs found and ignored
v2: Update description of --silent_connection in README
and English resource file (translations not updated).
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- Set dpi-awareness to true in the manifest (i.e., "system-dpi aware")
- Check system dpi and scale and/or position widgets and windows
that depend on the system dpi (only components within the status
window are affected).
Note: Declaring dpi awareness eliminates automatic rescaling of
windows that causes blurred text on high dpi monitors.
Windows 8.1 and later allow per monitor dpi setting which is
not handled here.
Note: IDS_NFO_TOKEN_PASSWORD_CAPTION and IDS_NFO_TOKEN_PASSWORD_REQUEST
strings need translation.
TODO: support for selecting pkcs11-id from the GUI
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Option ediitng dialogs are in two tabs: General and Advanced.
Proxy related options are left in the proxy tab. Options
config_dir, config_ext, log_dir, script timeouts and
service-only flag are in the Advanced tab. All other more commonly
used flags and options are in the General tab.
- As options are editable, save values in registry only when they differ
from the default values. This leaves the registry clean and makes changing
options and their defaults during updates easier.
- Entries for config_dir and log_dir must be absolute paths.
Environemental variables such as %PROFILEDIR% may be used
to construct these.
- Empty config_dir, config_ext and log_dir entries are silently
ignored (i.e., the current values are left unchanged).
- Store all numeric and boolean parameters in registry as DWORD instead of
strings.
- On startup, the default parameters are loaded, then the registry is read
and finally command-line parameters parsedi.
- Out of range script timeout values in registry truncated with a
warning instead of fatal error. This allows the user to access the
settings dialog and make corrections.
- Save proxy and language settings under the same
HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings.
- Save the current version of the GUI in regsitry so that updates
can be detected and any needed registry cleanup done.
- If no version info is present in the registry any values in OpenVPN-GUI
key in HKCU are deleted for a clean start as this is the first version
to save registry values in HKCU. Language and proxy data if present
under Nilings is migrated.
Note: new controls in the General tab and newly added Advanced tab dialog
are copied to all language files from the English version. These need to
be translated.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- Replace allow_password by a runtime check that enables password
change menu only when the user has write-access to the key file.
- Read exe_path and priority from HKLM and do not duplicate in HKCU.
- Always allow the user to view the config: edit will succeed if user
has write access.
- Always include the proxy settings tab which is the default.
- Remove the unused power event handling and disconnect_on_suspend key.
- Remove password_attempts -- user can stop the password dilaog
by clicking cancel.
- Remove allow_service: implicitly enabled if service_only is used.
- Deprecate removed options in cmd-line parser
- Update README.rst
- Close config file before exit in GetKeyFileName
- Close thread and dialog handles in passphrase.c
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- Username and, optionally, password as well as the private
key passphrase are saved in config-specific registry keys
- All saved data are kept encrypted using DPAPI
- The passphrase dialog is skipped if a valid saved private
key password is available. However, the user-auth dialog
is always presented, prefilled with the saved username
and password.
Note: A text string "Save password" is added to three dialogs
in all language resource files. Additional text with ids
IDS_MENU_CLEARPASS and IDS_NFO_DELETE_PASS are added to the
STRINGTABLE only in the English language resource file.
All these need translations.
Signed-off-by: Selva Nair <selva.nair@gmail.com>
When a connection is attempted using a config in a location
that would fail, offer an option to add the user to the "OpenVPN
Administrators" group. This is done using shell-execute which will
show a UAC prompt for elevation. If it fails (due to user chooses
NO or the UAC dialog fails) the connection is not started.
v2 Changes
- Rebase to master
- Automaticlaly add the admin group if it doesn't exist
- Allow unicode strings in debug output
- Use domain\username to identify user
- Fix the PrintDebug macro
Minor changes based on user feedback
- Bring the window back to foreground after UAC prompt completion
- Show a message if another connection is tried during authorization
- Do not add user to ovpn_admin_group if it is same as the built-in admin group
Signed-off-by: Selva Nair <selva.nair@gmail.com>
- Set default config directory (config_dir) to %UserProfile%\OpenVPN\config
(saved and read back from HKCU\Software\OpenVPN-GUI\config_dir)
- Add a global_config_dir variable read from HKLM\Software\OpenVPN\config_dir
or set to OpenVPN-install-path\config
- Scan both directories and their sub directories for connection profiles.
In case of name conflicts config_dir gets priority over global_config_dir
- Eliminate multiple warnings of duplicate configs
Fixed on review (Thanks to leobasilio@gmail.com)
- Fix wrongly used o.config_dir in 2 locations
- Unrelated: Added missing CheckIServiceStatus to service.h
Signed-off-by: Selva Nair <selva.nair@gmail.com>
Selva Nair