You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

598 lines
17 KiB

/*
* OpenVPN-GUI -- A Windows GUI for OpenVPN.
*
* Copyright (C) 2004 Mathias Sundman <mathias@nilings.se>
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
* 2016 Selva Nair <selva.nair@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program (see the file COPYING included with this
* distribution); if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
#include <windows.h>
#include <tchar.h>
#include <shlobj.h>
#include "main.h"
#include "options.h"
#include "openvpn-gui-res.h"
#include "registry.h"
#include "localization.h"
extern options_t o;
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
struct regkey_str {
const WCHAR *name;
WCHAR *var;
int len;
const WCHAR *value;
} regkey_str[] = {
{L"config_dir", o.config_dir, _countof(o.config_dir), L"%USERPROFILE%\\OpenVPN\\config"},
{L"config_ext", o.ext_string, _countof(o.ext_string), L"ovpn"},
{L"log_dir", o.log_dir, _countof(o.log_dir), L"%USERPROFILE%\\OpenVPN\\log"}
};
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
struct regkey_int {
const WCHAR *name;
DWORD *var;
DWORD value;
} regkey_int[] = {
{L"log_append", &o.log_append, 0},
{L"iservice_admin", &o.iservice_admin, 1},
{L"show_balloon", &o.show_balloon, 1},
{L"silent_connection", &o.silent_connection, 0},
{L"preconnectscript_timeout", &o.preconnectscript_timeout, 10},
{L"connectscript_timeout", &o.connectscript_timeout, 30},
{L"disconnectscript_timeout", &o.disconnectscript_timeout, 10},
{L"show_script_window", &o.show_script_window, 0},
{L"config_menu_view", &o.config_menu_view, CONFIG_VIEW_AUTO},
{L"popup_mute_interval", &o.popup_mute_interval, 24},
{L"disable_popup_messages", &o.disable_popup_messages, 0},
{L"management_port_offset", &o.mgmt_port_offset, 25340},
{L"enable_peristent_connections", &o.enable_persistent, 2},
{L"enable_auto_restart", &o.enable_auto_restart, 1},
{L"auth_pass_concat_otp", &o.auth_pass_concat_otp, 0},
{L"ovpn_engine", &o.ovpn_engine, OPENVPN_ENGINE_OVPN2}
};
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
static int
RegValueExists(HKEY regkey, const WCHAR *name)
{
return (RegQueryValueEx(regkey, name, NULL, NULL, NULL, NULL) == ERROR_SUCCESS);
}
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
static int
GetGlobalRegistryKeys()
{
TCHAR windows_dir[MAX_PATH];
HKEY regkey;
if (!GetWindowsDirectory(windows_dir, _countof(windows_dir)))
{
/* can't get windows dir */
ShowLocalizedMsg(IDS_ERR_GET_WINDOWS_DIR);
/* Use a default value */
_sntprintf_0(windows_dir, L"C:\\Windows");
}
/* set default editor and log_viewer as a fallback for opening config/log files */
_sntprintf_0(o.editor, L"%ls\\%ls", windows_dir, L"System32\\notepad.exe");
_sntprintf_0(o.log_viewer, L"%ls", o.editor);
/* Get path to OpenVPN installation. */
if (RegOpenKeyEx(HKEY_LOCAL_MACHINE, _T("SOFTWARE\\OpenVPN"), 0, KEY_READ, &regkey)
!= ERROR_SUCCESS)
{
/* registry key not found */
regkey = NULL;
ShowLocalizedMsg(IDS_ERR_OPEN_REGISTRY);
}
if (!regkey || !GetRegistryValue(regkey, _T(""), o.install_path, _countof(o.install_path))
|| _tcslen(o.install_path) == 0)
{
/* error reading registry value */
if (regkey)
{
ShowLocalizedMsg(IDS_ERR_READING_REGISTRY);
}
/* Use a sane default value */
_sntprintf_0(o.install_path, _T("%ls"), _T("C:\\Program Files\\OpenVPN\\"));
}
if (o.install_path[_tcslen(o.install_path) - 1] != _T('\\'))
{
_tcscat(o.install_path, _T("\\"));
}
/* an admin-defined global config dir defined in HKLM\OpenVPN\config_dir */
if (!regkey || !GetRegistryValue(regkey, _T("config_dir"), o.global_config_dir, _countof(o.global_config_dir)))
{
/* use default = openvpnpath\config */
_sntprintf_0(o.global_config_dir, _T("%lsconfig"), o.install_path);
}
if (!regkey || !GetRegistryValue(regkey, _T("autostart_config_dir"), o.config_auto_dir, _countof(o.config_auto_dir)))
{
/* use default = openvpnpath\config-auto */
_sntprintf_0(o.config_auto_dir, L"%lsconfig-auto", o.install_path);
}
if (!regkey || !GetRegistryValue(regkey, _T("log_dir"), o.global_log_dir, _countof(o.global_log_dir)))
{
/* use default = openvpnpath\log */
_sntprintf_0(o.global_log_dir, L"%lslog", o.install_path);
}
if (!regkey || !GetRegistryValue(regkey, _T("ovpn_admin_group"), o.ovpn_admin_group, _countof(o.ovpn_admin_group)))
{
_tcsncpy(o.ovpn_admin_group, OVPN_ADMIN_GROUP, _countof(o.ovpn_admin_group)-1);
}
if (!regkey || !GetRegistryValue(regkey, _T("exe_path"), o.exe_path, _countof(o.exe_path)))
{
_sntprintf_0(o.exe_path, _T("%lsbin\\openvpn.exe"), o.install_path);
}
if (!regkey || !GetRegistryValue(regkey, _T("priority"), o.priority_string, _countof(o.priority_string)))
{
_tcsncpy(o.priority_string, _T("NORMAL_PRIORITY_CLASS"), _countof(o.priority_string)-1);
}
if (!regkey || !GetRegistryValueNumeric(regkey, _T("disable_save_passwords"), &o.disable_save_passwords))
{
o.disable_save_passwords = 0;
}
if (regkey)
{
RegCloseKey(regkey);
}
return true;
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
}
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
int
GetRegistryKeys()
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
{
HKEY regkey;
DWORD status;
int i;
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
if (!GetGlobalRegistryKeys())
{
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
return false;
}
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
status = RegOpenKeyEx(HKEY_CURRENT_USER, GUI_REGKEY_HKCU, 0, KEY_READ, &regkey);
for (i = 0; i < (int) _countof(regkey_str); ++i)
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
{
if (status != ERROR_SUCCESS
|| !GetRegistryValue(regkey, regkey_str[i].name, regkey_str[i].var, regkey_str[i].len))
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
{
/* no value found in registry, use the default */
wcsncpy(regkey_str[i].var, regkey_str[i].value, regkey_str[i].len);
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
regkey_str[i].var[regkey_str[i].len-1] = L'\0';
PrintDebug(L"default: %ls = %ls", regkey_str[i].name, regkey_str[i].var);
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
}
else
{
PrintDebug(L"from registry: %ls = %ls", regkey_str[i].name, regkey_str[i].var);
}
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
}
for (i = 0; i < (int) _countof(regkey_int); ++i)
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
{
if (status != ERROR_SUCCESS
|| !GetRegistryValueNumeric(regkey, regkey_int[i].name, regkey_int[i].var))
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
{
/* no value found in registry, use the default */
*regkey_int[i].var = regkey_int[i].value;
PrintDebug(L"default: %ls = %lu", regkey_int[i].name, *regkey_int[i].var);
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
}
else
{
PrintDebug(L"from registry: %ls = %lu", regkey_int[i].name, *regkey_int[i].var);
}
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
}
if (status == ERROR_SUCCESS)
{
RegCloseKey(regkey);
}
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
if ((o.disconnectscript_timeout == 0))
{
ShowLocalizedMsg(IDS_ERR_DISCONN_SCRIPT_TIMEOUT);
o.disconnectscript_timeout = 10;
}
if ((o.preconnectscript_timeout == 0))
{
ShowLocalizedMsg(IDS_ERR_PRECONN_SCRIPT_TIMEOUT);
o.preconnectscript_timeout = 10;
}
if (o.mgmt_port_offset < 1 || o.mgmt_port_offset > 61000)
{
o.mgmt_port_offset = 25340;
}
/* Read group policy setting for password reveal */
status = RegOpenKeyExW(HKEY_CURRENT_USER, L"Software\\Policies\\Microsoft\\Windows\\CredUI", 0, KEY_READ, &regkey);
if (status != ERROR_SUCCESS
|| !GetRegistryValueNumeric(regkey, L"DisablePasswordReveal", &o.disable_password_reveal))
{
o.disable_password_reveal = 0;
PrintDebug(L"default: %ls = %lu", L"DisablePasswordReveal", o.disable_password_reveal);
}
else
{
PrintDebug(L"from policy: %ls = %lu", L"DisablePasswordReveal", o.disable_password_reveal);
}
if (status == ERROR_SUCCESS)
{
RegCloseKey(regkey);
}
ExpandOptions();
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
return true;
}
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
int
SaveRegistryKeys()
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
{
HKEY regkey;
DWORD status;
int i;
int ret = false;
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
status = RegCreateKeyEx(HKEY_CURRENT_USER, GUI_REGKEY_HKCU, 0, NULL, REG_OPTION_NON_VOLATILE,
KEY_WRITE|KEY_READ, NULL, &regkey, NULL);
if (status != ERROR_SUCCESS)
{
ShowLocalizedMsg(IDS_ERR_CREATE_REG_HKCU_KEY, GUI_REGKEY_HKCU);
goto out;
}
for (i = 0; i < (int) _countof(regkey_str); ++i)
{
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
/* save only if the value differs from default or already present in registry */
if (CompareStringExpanded(regkey_str[i].var, regkey_str[i].value) != 0
|| RegValueExists(regkey, regkey_str[i].name) )
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
{
if (!SetRegistryValue(regkey, regkey_str[i].name, regkey_str[i].var))
{
goto out;
}
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
}
}
for (i = 0; i < (int) _countof(regkey_int); ++i)
{
if (*regkey_int[i].var != regkey_int[i].value
|| RegValueExists(regkey, regkey_int[i].name) )
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
{
if (!SetRegistryValueNumeric(regkey, regkey_int[i].name, *regkey_int[i].var))
{
goto out;
}
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
}
}
ret = true;
out:
if (status == ERROR_SUCCESS)
{
RegCloseKey(regkey);
}
return ret;
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
}
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
static BOOL
GetRegistryVersion(version_t *v)
{
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
HKEY regkey;
CLEAR(*v);
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
DWORD len = sizeof(*v);
if (RegOpenKeyEx(HKEY_CURRENT_USER, GUI_REGKEY_HKCU, 0, KEY_READ, &regkey) == ERROR_SUCCESS)
{
if (RegGetValueW(regkey, NULL, L"version", RRF_RT_REG_BINARY, NULL, v, &len)
!= ERROR_SUCCESS)
{
CLEAR(*v);
}
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
RegCloseKey(regkey);
}
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
return true;
}
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
static BOOL
SetRegistryVersion(const version_t *v)
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
{
HKEY regkey;
DWORD status;
BOOL ret = false;
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
status = RegCreateKeyEx(HKEY_CURRENT_USER, GUI_REGKEY_HKCU, 0, NULL, REG_OPTION_NON_VOLATILE,
KEY_WRITE, NULL, &regkey, NULL);
if (status == ERROR_SUCCESS)
{
if (RegSetValueEx(regkey, L"version", 0, REG_BINARY, (const BYTE *) v, sizeof(*v)) == ERROR_SUCCESS)
{
ret = true;
}
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
RegCloseKey(regkey);
}
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
else
{
PrintDebug(L"Eror opening/creating 'HKCU\\%ls' registry key", GUI_REGKEY_HKCU);
}
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
return ret;
}
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
static int
MigrateNilingsKeys()
{
DWORD status;
BOOL ret = false;
HKEY regkey, regkey_proxy, regkey_nilings;
status = RegOpenKeyEx(HKEY_CURRENT_USER, L"Software\\Nilings\\OpenVPN-GUI", 0,
KEY_READ, &regkey_nilings);
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
if (status != ERROR_SUCCESS)
{
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
return true; /* No old keys to migrate */
}
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
status = RegCreateKeyEx(HKEY_CURRENT_USER, GUI_REGKEY_HKCU, 0, NULL, REG_OPTION_NON_VOLATILE,
KEY_ALL_ACCESS, NULL, &regkey, NULL);
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
if (status != ERROR_SUCCESS)
{
ShowLocalizedMsg(IDS_ERR_CREATE_REG_HKCU_KEY, GUI_REGKEY_HKCU);
RegCloseKey(regkey_nilings);
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
return false;
}
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
/* For some reason this needs ALL_ACCESS for the CopyTree below to work */
status = RegCreateKeyEx(regkey, L"proxy", 0, NULL, REG_OPTION_NON_VOLATILE,
KEY_ALL_ACCESS, NULL, &regkey_proxy, NULL);
if (status == ERROR_SUCCESS)
{
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
DWORD ui_lang;
/* Move language setting from Nilings to GUI_REGKEY_HKCU */
if (GetRegistryValueNumeric(regkey_nilings, L"ui_language", &ui_lang))
{
SetRegistryValueNumeric(regkey, L"ui_language", ui_lang);
}
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
status = RegCopyTree(regkey_nilings, NULL, regkey_proxy);
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
if (status == ERROR_SUCCESS)
{
RegDeleteValue(regkey_proxy, L"ui_language"); /* in case copied here */
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
ret = true;
}
RegCloseKey(regkey_proxy);
}
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
else
{
PrintDebug(L"Error creating key 'proxy' in HKCU\\%ls", GUI_REGKEY_HKCU);
}
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
RegCloseKey(regkey);
RegCloseKey(regkey_nilings);
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
return ret;
}
int
UpdateRegistry(void)
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
{
version_t v;
GetRegistryVersion(&v);
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
if (memcmp(&v, &o.version, sizeof(v)) == 0)
{
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
return true;
}
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
switch (v.major)
{
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
case 0: /* Cleanup GUI_REGKEY_HKCU and migrate any values under Nilings */
RegDeleteTree(HKEY_CURRENT_USER, GUI_REGKEY_HKCU); /* delete all values and subkeys */
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
if (!MigrateNilingsKeys())
{
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
return false;
}
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
/* fall through to handle further updates */
case 11:
/* current version -- nothing to do */
break;
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
default:
break;
}
SetRegistryVersion(&o.version);
PrintDebug(L"Registry updated to version %hu.%hu", o.version.major, o.version.minor);
Make options saved in registry editable by user Option ediitng dialogs are in two tabs: General and Advanced. Proxy related options are left in the proxy tab. Options config_dir, config_ext, log_dir, script timeouts and service-only flag are in the Advanced tab. All other more commonly used flags and options are in the General tab. - As options are editable, save values in registry only when they differ from the default values. This leaves the registry clean and makes changing options and their defaults during updates easier. - Entries for config_dir and log_dir must be absolute paths. Environemental variables such as %PROFILEDIR% may be used to construct these. - Empty config_dir, config_ext and log_dir entries are silently ignored (i.e., the current values are left unchanged). - Store all numeric and boolean parameters in registry as DWORD instead of strings. - On startup, the default parameters are loaded, then the registry is read and finally command-line parameters parsedi. - Out of range script timeout values in registry truncated with a warning instead of fatal error. This allows the user to access the settings dialog and make corrections. - Save proxy and language settings under the same HKCU\Software\OpenVPN-GUI key as other options instead of under Nilings. - Save the current version of the GUI in regsitry so that updates can be detected and any needed registry cleanup done. - If no version info is present in the registry any values in OpenVPN-GUI key in HKCU are deleted for a clean start as this is the first version to save registry values in HKCU. Language and proxy data if present under Nilings is migrated. Note: new controls in the General tab and newly added Advanced tab dialog are copied to all language files from the English version. These need to be translated. Signed-off-by: Selva Nair <selva.nair@gmail.com>
8 years ago
return true;
}
LONG
GetRegistryValue(HKEY regkey, const TCHAR *name, TCHAR *data, DWORD len)
{
LONG status;
DWORD type;
DWORD data_len;
data_len = len * sizeof(*data);
/* get a registry string */
status = RegQueryValueEx(regkey, name, NULL, &type, (byte *) data, &data_len);
if (status != ERROR_SUCCESS || type != REG_SZ)
{
return(0);
}
data_len /= sizeof(*data);
if (data_len > 0)
{
data[data_len - 1] = L'\0'; /* REG_SZ strings are not guaranteed to be null-terminated */
}
else
{
data[0] = L'\0';
}
return(data_len);
}
LONG
GetRegistryValueNumeric(HKEY regkey, const TCHAR *name, DWORD *data)
{
DWORD type;
DWORD size = sizeof(*data);
LONG status = RegQueryValueEx(regkey, name, NULL, &type, (PBYTE) data, &size);
return (type == REG_DWORD && status == ERROR_SUCCESS) ? 1 : 0;
}
int
SetRegistryValue(HKEY regkey, const TCHAR *name, const TCHAR *data)
{
/* set a registry string */
DWORD size = (_tcslen(data) + 1) * sizeof(*data);
if (RegSetValueEx(regkey, name, 0, REG_SZ, (PBYTE) data, size) != ERROR_SUCCESS)
{
/* Error writing registry value */
ShowLocalizedMsg(IDS_ERR_WRITE_REGVALUE, GUI_REGKEY_HKCU, name);
return(0);
}
return(1);
}
int
SetRegistryValueNumeric(HKEY regkey, const TCHAR *name, DWORD data)
{
LONG status = RegSetValueEx(regkey, name, 0, REG_DWORD, (PBYTE) &data, sizeof(data));
if (status == ERROR_SUCCESS)
{
return 1;
}
ShowLocalizedMsg(IDS_ERR_WRITE_REGVALUE, GUI_REGKEY_HKCU, name);
return 0;
}
/*
* Open HKCU\Software\OpenVPN-GUI\configs\config-name.
* The caller must close the key. Returns 1 on success.
*/
static int
OpenConfigRegistryKey(const WCHAR *config_name, HKEY *regkey, BOOL create)
{
DWORD status;
const WCHAR fmt[] = L"SOFTWARE\\OpenVPN-GUI\\configs\\%ls";
int count = (wcslen(config_name) + wcslen(fmt) + 1);
WCHAR *name = malloc(count * sizeof(WCHAR));
if (!name)
{
return 0;
}
_snwprintf(name, count, fmt, config_name);
name[count-1] = L'\0';
if (!create)
{
status = RegOpenKeyEx(HKEY_CURRENT_USER, name, 0, KEY_READ | KEY_WRITE, regkey);
}
else
{
/* create if key doesn't exist */
status = RegCreateKeyEx(HKEY_CURRENT_USER, name, 0, NULL,
REG_OPTION_NON_VOLATILE, KEY_READ | KEY_WRITE, NULL, regkey, NULL);
}
free(name);
return (status == ERROR_SUCCESS);
}
int
SetConfigRegistryValueBinary(const WCHAR *config_name, const WCHAR *name, const BYTE *data, DWORD len)
{
HKEY regkey;
DWORD status;
if (!OpenConfigRegistryKey(config_name, &regkey, TRUE))
{
return 0;
}
status = RegSetValueEx(regkey, name, 0, REG_BINARY, data, len);
RegCloseKey(regkey);
return (status == ERROR_SUCCESS);
}
/*
* Read registry value into the user supplied buffer data that can hold
* up to len bytes. Returns the actual number of bytes read or zero on error.
* If data is NULL returns the required buffer size, and no data is read.
*/
DWORD
GetConfigRegistryValue(const WCHAR *config_name, const WCHAR *name, BYTE *data, DWORD len)
{
DWORD status;
DWORD type;
HKEY regkey;
if (!OpenConfigRegistryKey(config_name, &regkey, FALSE))
{
return 0;
}
status = RegQueryValueEx(regkey, name, NULL, &type, data, &len);
RegCloseKey(regkey);
if (status == ERROR_SUCCESS)
{
return len;
}
else
{
return 0;
}
}
int
DeleteConfigRegistryValue(const WCHAR *config_name, const WCHAR *name)
{
DWORD status;
HKEY regkey;
if (!OpenConfigRegistryKey(config_name, &regkey, FALSE))
{
return 0;
}
status = RegDeleteValue(regkey, name);
RegCloseKey(regkey);
return (status == ERROR_SUCCESS);
}