* Two new states will be added to the tcpstat collector called rx_queued_bytes and tx_queued_bytes.
For UDP datagrams an additional collector 'udp_queues' can be used to expose the total lengths of the tx_queue and rx_queue.
@SuperQ and @discordianfish this changes gives us the option to check for overloaded UDP + TCP processing.
The names of the new TCP states and the UDP metric can be discussed.
The current reasons are just:
I don't want to add another collector for the same exposed file, so I just added the new states to the tcpstat collector.
I chose the name 'udp_queue' instead of 'udpstat' as UDP has no state.
Signed-off-by: Peter Bueschel <peter.bueschel@logmein.com>
Update CHANGELOG/VERSION for 1.0.0-rc.0 release.
* Add a note about new https settings to top-level README.
* Mark --web.config flag as experimental.
Signed-off-by: Ben Kochie <superq@gmail.com>
* add a map of profilers to CPUids
`runtime.NumCPU()` returns the number of CPUs that the process can run
on. This number does not necessarily correlate to CPU ids if the
affinity mask of the process is set.
This change maintains the current behavior as default, but also allows
the user to specify a range of CPUids to use instead.
The CPU id is stored as the value of a map keyed on the profiler
object's address.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Daniel Hodges <hodges.daniel.scott@gmail.com>
Signed-off-by: Daniel Hodges <hodges@uber.com>
Co-authored-by: jdamato-fsly <55214354+jdamato-fsly@users.noreply.github.com>
This exposes RAPL statistics from /sys/class/powercap.
Co-Authored-By: Ben Kochie <superq@gmail.com>
Signed-off-by: Ukri Niemimuukko <ukri.niemimuukko@intel.com>
This enables the collection of pressure stall information as exposed
by the `/proc/pressure` interface added in the 4.20 release of the
Linux kernel.
Closes#1174
Signed-off-by: Daniele Sluijters <daenney@users.noreply.github.com>
The cpu frequency information is not always needed and/or available.
This change allows the cpu frequency metrics to be enabled/disabled
separately from the other cpu metrics, and also prevents a frequency
metric failure (such as a parse error) from failing the main cpu
collector.
Fixes#1241
Signed-off-by: Paul Gier <pgier@redhat.com>
* Add diskstats collector for OpenBSD
Tested on i386 and amd64, OpenBSD 6.4 and -current.
* Refactor diskstats collectors
This moves common descriptors from Linux, Darwin, OpenBSD
diskstats collectors into diskstats_common.go
Signed-off-by: Ralf Horstmann <ralf+github@ackstorm.de>
* State that wifi collector is disabled by default
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Add the 'processes' collector to the Readme
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* strip rootfs prefix for run in docker
* Use `/` as default value of path.rootfs, and parse mounts from `/proc/1/mounts`.
* No need to mount `/proc` and `/sys` because we share host's PID
namespace, which allows processes within the container to see all of the
processes on the system.
Closes: #66
Signed-off-by: Ivan Mikheykin <ivan.mikheykin@flant.com>
Signed-off-by: Yecheng Fu <cofyc.jackson@gmail.com>
* add sys/class/net parsing from procfs and expose its metrics
Signed-off-by: Jan Klat <jenik@klatys.cz>
* change code to use int pointers per procfs change, move netclass to separate collector, change metric naming
Signed-off-by: Jan Klat <jenik@klatys.cz>
* bump year in licence, remove redundant newline, correct fixtures
Signed-off-by: Jan Klat <jenik@klatys.cz>
* fix style
Signed-off-by: Jan Klat <jenik@klatys.cz>
* change carrier changes to counter type
Signed-off-by: Jan Klat <jenik@klatys.cz>
* fix e2e output
Signed-off-by: Jan Klat <jenik@klatys.cz>
* add fixtures
Signed-off-by: Jan Klat <jenik@klatys.cz>
* update vendor, use fixtures correctly
Signed-off-by: Jan Klat <jenik@klatys.cz>
* change fixtures (device in /sys/class/net should be symlinked)
Signed-off-by: Jan Klat <jenik@klatys.cz>
* correct fixtures for 64k page, updated readme
Signed-off-by: Jan Klat <jenik@klatys.cz>
Enable NFS client metrics by default now that it nolonger prints errors
on scrape if there are no metrics to display.
Also fixup the nfsd README to match the nfs entry.
* Move NodeCollector into package collector
* Refactor collector enabling
* Update README with new collector enabled flags
* Fix out-of-date inline flag reference syntax
* Use new flags in end-to-end tests
* Add flag to disable all default collectors
* Track if a flag has been set explicitly
* Add --collectors.disable-defaults to README
* Revert disable-defaults flag
* Shorten flags
* Fixup timex collector registration
* Fix end-to-end tests
* Change procfs and sysfs path flags
* Fix review comments
This collector is based on adjtimex(2) system call. The collector returns
three values, status if time is synchronised, offset to remote reference,
and local clock frequency adjustment.
Values are taken from kernel time keeping data structures to avoid getting
involved how the synchronisation is implemented. By that I mean one should
not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on.
Since all time sync implementation will always end up telling to kernel what
is the status with time one can simply omit the software in between, and
look results of the syncing. As a positive side effect this makes collector
very quick and conceptually specific, this does not monitor availability of
NTP server, or network in between, or dns resolution, and other unrelated
but necessary things.
Minimum set of values to keep eye on are the following three:
The node_timex_sync_status tells if local clock is in sync with a remote
clock. Value is set to zero when synchronisation to a reliable server
is lost, or a time sync software is misconfigured.
The node_timex_offset_seconds tells how much local clock is off when
compared to reference. In case of multiple time references this value
is outcome of RFC 5905 adjustment algorithm. Ideally offset should be
close to zero, and it depends about use case how large value is
acceptable. For example a typical web server is probably fine if offset
is about 0.1 or less, but that would not be good enough for mobile phone
base station operator.
The node_timex_freq tells amount of adjustment to local clock tick
frequency. For example if offset is one second and growing the local
clock will need instruction to tick quicker. Number value itself is not
very important, and occasional small adjustments are fine. When
frequency is unusually in stable one can assume quality of time stamps
will not be accurate to very far in sub second range. Obviously
explaining why local clock frequency behaves like a passenger in roller
coaster is different matter. Explanations can vary from system load, to
environmental issues such as a machine being physically too hot.
Rest of the measurements can help when debugging. If you run a clock server
do probably want to collect and keep track of everything.
Pull-request: https://github.com/prometheus/node_exporter/pull/664
* Add metrics from SNTPv4 packet to ntp collector & add ntpd sanity check
1. Checking local clock against remote NTP daemon is bad idea, local
ntpd acting as a client should do it better and avoid excessive load on
remote NTP server so the collector is refactored to query local NTP
server.
2. Checking local clock against remote one does not check local ntpd
itself. Local ntpd may be down or out of sync due to network issues, but
clock will be OK.
3. Checking NTP server using sanity of it's response is tricky and
depends on ntpd implementation, that's why common `node_ntp_sanity`
variable is exported.
* `govendor add golang.org/x/net/ipv4`, it is dependency of github.com/beevik/ntp
* Update github.com/beevik/ntp to include boring SNTP fix
* Use variable name from RFC5905
* ntp: move code to make export of raw metrics more explicit
* Move NTP math to `github.com/beevik/ntp`
* Make `golint` happy
* Add some brief docs explaining `ntp` #655 and `timex` #664 modules
* ntp: drop XXX comment that got its decision
* ntp: add `_seconds` suffix to relevant metrics
* Better `node_ntp_leap` comment
* s/node_ntp_reftime/node_ntp_reference_timestamp_seconds/ as requested by @discordianfish
* Extract subsystem name to const as suggested by @SuperQ
Tested a DL360 Gen9 box with an Omni-Path adapter in it. The existing InfiniBand collector can provide support for the same metrics on Omni-Path cards as well.
Signed-Off-By: Joe Handzik <joseph.t.handzik@hpe.com>
* Add bcache collector for Linux
This collector gathers metrics related to the Linux block cache
(bcache) from sysfs.
* Removed commented out code
* Use project comment style
* Add _sectors to metric name to indicate unit
* Really use project comment style
* Rename bcache.go to bcache_linux.go
* Keep collector namespace clean
Rename:
- metric -> bcacheMetric
- periodStatsToMetrics -> bcachePeriodStatsToMetric
* Shorten slice initialization
* Change label names to backing_device, cache_device
* Remove five minute metrics (keep only total)
* Include units in additional metric names
* Enable bcache collector by default
* Provide metrics in seconds, not nanoseconds
* remove metrics with label "all"
* Add fixtures, update end-to-end for bcache collector
* Move fixtures/sys into tar.gz
This changeset moves the collector/fixtures/sys directory into
collector/fixtures/sys.tar.gz and tweaks the Makefile to unpack the
tarball before tests are run.
The reason for this change is that Windows does not allow colons in a
path (colons are present in some of the bcache fixture files), nor can
it (out of the box) deal with pathnames longer than 260 characters
(which we would be increasingly likely to hit if we tried to replace
colons with longer codes that are guaranteed not the turn up in regular
file names).
* Add ttar: plain text archive, replacement for tar
This changeset adds ttar, a plain text replacement for tar, and uses it
for the sysfs fixture archive. The syntax is loosely based on tar(1).
Using a plain text archive makes it possible to review changes without
downloading and extracting the archive. Also, when working on the repo,
git diff and git log become useful again, allowing a committer to verify
and track changes over time.
The code is written in bash, because bash is available out of the box on
all major flavors of Linux and on macOS. The feature set used is
restricted to bash version 3.2 because that is what Apple is still
shipping.
The programm also works on Windows if bash is installed. Obviously, it
does not solve the Windows limitations (path length limited to 260
characters, no symbolic links) that prompted the move to an archive
format in the first place.
Calle Pettersson