* Move NodeCollector into package collector
* Refactor collector enabling
* Update README with new collector enabled flags
* Fix out-of-date inline flag reference syntax
* Use new flags in end-to-end tests
* Add flag to disable all default collectors
* Track if a flag has been set explicitly
* Add --collectors.disable-defaults to README
* Revert disable-defaults flag
* Shorten flags
* Fixup timex collector registration
* Fix end-to-end tests
* Change procfs and sysfs path flags
* Fix review comments
This collector is based on adjtimex(2) system call. The collector returns
three values, status if time is synchronised, offset to remote reference,
and local clock frequency adjustment.
Values are taken from kernel time keeping data structures to avoid getting
involved how the synchronisation is implemented. By that I mean one should
not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on.
Since all time sync implementation will always end up telling to kernel what
is the status with time one can simply omit the software in between, and
look results of the syncing. As a positive side effect this makes collector
very quick and conceptually specific, this does not monitor availability of
NTP server, or network in between, or dns resolution, and other unrelated
but necessary things.
Minimum set of values to keep eye on are the following three:
The node_timex_sync_status tells if local clock is in sync with a remote
clock. Value is set to zero when synchronisation to a reliable server
is lost, or a time sync software is misconfigured.
The node_timex_offset_seconds tells how much local clock is off when
compared to reference. In case of multiple time references this value
is outcome of RFC 5905 adjustment algorithm. Ideally offset should be
close to zero, and it depends about use case how large value is
acceptable. For example a typical web server is probably fine if offset
is about 0.1 or less, but that would not be good enough for mobile phone
base station operator.
The node_timex_freq tells amount of adjustment to local clock tick
frequency. For example if offset is one second and growing the local
clock will need instruction to tick quicker. Number value itself is not
very important, and occasional small adjustments are fine. When
frequency is unusually in stable one can assume quality of time stamps
will not be accurate to very far in sub second range. Obviously
explaining why local clock frequency behaves like a passenger in roller
coaster is different matter. Explanations can vary from system load, to
environmental issues such as a machine being physically too hot.
Rest of the measurements can help when debugging. If you run a clock server
do probably want to collect and keep track of everything.
Pull-request: https://github.com/prometheus/node_exporter/pull/664
* Add bcache collector for Linux
This collector gathers metrics related to the Linux block cache
(bcache) from sysfs.
* Removed commented out code
* Use project comment style
* Add _sectors to metric name to indicate unit
* Really use project comment style
* Rename bcache.go to bcache_linux.go
* Keep collector namespace clean
Rename:
- metric -> bcacheMetric
- periodStatsToMetrics -> bcachePeriodStatsToMetric
* Shorten slice initialization
* Change label names to backing_device, cache_device
* Remove five minute metrics (keep only total)
* Include units in additional metric names
* Enable bcache collector by default
* Provide metrics in seconds, not nanoseconds
* remove metrics with label "all"
* Add fixtures, update end-to-end for bcache collector
* Move fixtures/sys into tar.gz
This changeset moves the collector/fixtures/sys directory into
collector/fixtures/sys.tar.gz and tweaks the Makefile to unpack the
tarball before tests are run.
The reason for this change is that Windows does not allow colons in a
path (colons are present in some of the bcache fixture files), nor can
it (out of the box) deal with pathnames longer than 260 characters
(which we would be increasingly likely to hit if we tried to replace
colons with longer codes that are guaranteed not the turn up in regular
file names).
* Add ttar: plain text archive, replacement for tar
This changeset adds ttar, a plain text replacement for tar, and uses it
for the sysfs fixture archive. The syntax is loosely based on tar(1).
Using a plain text archive makes it possible to review changes without
downloading and extracting the archive. Also, when working on the repo,
git diff and git log become useful again, allowing a committer to verify
and track changes over time.
The code is written in bash, because bash is available out of the box on
all major flavors of Linux and on macOS. The feature set used is
restricted to bash version 3.2 because that is what Apple is still
shipping.
The programm also works on Windows if bash is installed. Obviously, it
does not solve the Windows limitations (path length limited to 260
characters, no symbolic links) that prompted the move to an archive
format in the first place.
* Implement commonalities and linux support for ARP collection
* Add ARP collector to fixtures and run as part of e2e tests
* Bubble up scanner errors
* Use single return values where it makes sense
* Add missing annotation
* Move arp_common into arp_linux
* Add license header to arp_linux.go
* Address initial feedback
* Use strings.Fields instead of strings.Split
* Deal with scanner.Err() rather than throwing away errors
* Check for scan errors in-line before interacting with the entries map
* Don't interact with potentially empty text from scan
* Check for scan errors outside the scan loop
* Add comment about moving procfs parsing
* Add more direct comment
* Update initialism style to match go style guide
* Put function args on the same line
* Add TODO in front of comment about procfs extraction
* Guard against strings.Fields returning an empty slice
* Be more defensive about ARP table format and use upcase more broadly
* Enable the ARP collector by default
* Add ARP collector to the README
* Remove 'entry'
* Add hwmon support (mainly known from lm-sensors)
This commit adds initial support for linux hardware sensors, exported
through sysfs.
Details of the interface can be found at
https://www.kernel.org/doc/Documentation/hwmon/sysfs-interface
* Add end-to-end test with some real life data
* Cleanup comments on hwmon collector
* Drop raw sensor name from hwmon output
* Let the sensor label be "sensor"
* Add hwmon short description to README.
The option to write out a memory profile to file was removed in a730cff.
Declaring flags as local variable does not only result in cleaner, more
testable code, but also ensures that the program won't compile anymore
when unused flags are left in place.
Removes unused signal handlers left over from signal based collection
and block the non windows-relevant collectors loadavg and interrupts.
Signal based collection removed in 1c17481a42.
Enabled by default collectors are chosen for Linux, which supports all
of the implemented collectors. But for other OSes (OS X, for example)
this list is not suitable, because they lack most of those collectors.
Because of that, it is not possible to run node_exporter with default
options on such OSes. Fix this by filtering list of enabled by default
collectors based on their availability for current platform.
Closes#149
Signed-off-by: Pavel Borzenkov <pavel.borzenkov@gmail.com>
This creates a single metric like:
node_uname_info{domainname="(none)",machine="x86_64",nodename="desktop",release="3.16.0-48-generic",sysname="Linux",version="#64~14.04.1-Ubuntu SMP Thu Aug 20 23:03:57 UTC 2015"} 1
Fixed file-nr update function
Fixed file-nr test case
Fixed file-nr test case again
Fixed file-nr separator to tab
Updated file-nr to filenr.
Updated file-nr to filenr.
Fixed file-nr test cases, added comments
Remove reporting the second value from file-nr as it will alwasy be zero in linux 2.6 and greator
Renaming file-nr to filefd
Updated build constraint
Updates and code cleanup for filefd.
Updated enabledCollectors with the correct name for filefd
Fixed filefd test wording
initial work on sockstat work
Fixed package name
Finished implementation of the sockstat plugin
missed a return value
Added sockstat to default plugins to start
Fixed scanner read on sockstat
fixed sockstat linux test for TCP alloc
update sockstat test case
Updated sockstat to return TCP and UDP memory in bytes instead of page count
This allows static metrics (e.g. an attributes collector replacement),
and cronjobs to expose stats by echoing into a file.
For example:
echo "my_metric 123" > mycronjob.prom.$$
mv mycronjob.prom.$$ mycronjob.prom
Remove special tags necessary for gmond and runit collectors. All
collectors get built. Selection of which collectors to use continues to
happen via parameter.
This catches things like listen overflows, retransmits
and other things that are very useful for retroactive debugging
thus I think it's justified to have it on by default.
Switch to Update using the Collecter Collect interface, due to not knowing all
metricnames in all modules beforehand we can't use Describe and thus the full
Collecter interface.
Remove 'updates', it's meaning varies by module and doesn't add much.
Calle Pettersson