Automatic merge from submit-queue (batch tested with PRs 45685, 45572, 45624, 45723, 45733)
Display <none> for "kubectl get pods -o wide" when node is empty.
**What this PR does / why we need it**:
If pods are pending due to no matched node to be scheduled, `Spec.NodeName` would be empty. In this case, "kubectl get pods -o wide" displays `<none>` instead of empty.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 45634, 45480)
Rename vars scheduledJob to cronJob in describe.go
**What this PR does / why we need it**:
Rename vars scheduledJob to cronJob in describe.go
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
There might still be some leftovers in other places.
@soltysh
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
Add support for PodPreset in `kubectl get` command
**What this PR does / why we need it**:
PR title
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#44736
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
Fixed a tiny issue for ShortHumanDuration printer.
Fixed a tiny issue for ShortHumanDuration printer
to avoid "0y" message.
Fixed#44599
Automatic merge from submit-queue
Print conditions of RC/RS in 'kubectl describe' command
**What this PR does / why we need it**:
If conditions of RC/RS exist, print them in 'kubectl describe' command.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
Print conditions of RC/RS in 'kubectl describe' command.
```
Automatic merge from submit-queue (batch tested with PRs 44594, 44651)
remove strings.compare(), use string native operation
I notice we use strings.Compare() in some code, we can remove it and use native operation.
Automatic merge from submit-queue
Delete deprecated node phase in kubect describe node.
**What this PR does / why we need it**:
Since NodePhase is no longer used, delete it in `kubect describe node` result.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
ref: https://github.com/kubernetes/kubernetes/pull/44388
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 44440, 44038, 44302, 44316, 43876)
Show node address type in kubectl describe node command
**What this PR does / why we need it**:
To make node addresses more clear when describing node.
Before:
```
Addresses: 192.168.1.220,192.168.1.220,192.168.1.220
```
After:
```
Addresses:
LegacyHostIP: 192.168.1.220
InternalIP: 192.168.1.220
Hostname: 192.168.1.220
```
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
None
```
Automatic merge from submit-queue
In 'kubectl describe', find controllers with ControllerRef, instead of showing the original creator
@enisoc @kargakis @kubernetes/sig-apps-pr-reviews @kubernetes/sig-cli-pr-reviews
```release-note
In 'kubectl describe', find controllers with ControllerRef, instead of showing the original creator.
```
Automatic merge from submit-queue
kubectl: Adding IPv6 brackets for IPv6 endpoints
This fixes the lack of IPv6 when printing the IP:Port tuple with kubectl
describe command.
Signed-off-by: André Martins <aanm90@gmail.com>
**What this PR does / why we need it**: This adds IPv6 brackets on IPv6 endpoints when using `kubectl describe service`
**Special notes for your reviewer**: Since the IP is a string I think the fastest way to detect if it's an IPv6 was to check for the presence of : in it. Let me know what you think.
Automatic merge from submit-queue (batch tested with PRs 42900, 43044, 42896, 43308, 43621)
Convert PrefixWriter to an interface
Convert PrefixWriter to an interface to allow other packages to create instances. This is needed for downstream projects such as OpenShift.
cc @sttts @smarterclayton @oulinbao @deads2k @liggitt @kargakis @soltysh @kubernetes/sig-cli-pr-reviews
Automatic merge from submit-queue (batch tested with PRs 42998, 42902, 42959, 43020, 42948)
Add Host field to TCPSocketAction
Currently, TCPSocketAction always uses Pod's IP in connection. But when a pod uses the host network, sometimes firewall rules may prevent kubelet from connecting through the Pod's IP.
This PR introduces the 'Host' field for TCPSocketAction, and if it is set to non-empty string, the probe will be performed on the configured host rather than the Pod's IP. This gives users an opportunity to explicitly specify 'localhost' as the target for the above situations.
```release-note
Add Host field to TCPSocketAction
```
Automatic merge from submit-queue
kubectl: Use v1.5-compatible ownership logic when listing dependents.
**What this PR does / why we need it**:
This restores compatibility between kubectl 1.6 and clusters running Kubernetes 1.5.x. It introduces transitional ownership logic in which the client considers ControllerRef when it exists, but does not require it to exist.
If we were to ignore ControllerRef altogether (pre-1.6 client behavior), we would introduce a new failure mode in v1.6 because controllers that used to get stuck due to selector overlap will now make progress. For example, that means when reaping ReplicaSets of an overlapping Deployment, we would risk deleting ReplicaSets belonging to a different Deployment that we aren't about to delete.
This transitional logic avoids such surprises in 1.6 clusters, and does no worse than kubectl 1.5 did in 1.5 clusters. To prevent this when kubectl 1.5 is used against 1.6 clusters, we can cherrypick this change.
**Which issue this PR fixes**:
Fixes#43159
**Special notes for your reviewer**:
**Release note**:
```release-note
```
This effectively reverts the client-side changes in
cec3899b96.
We have to maintain the old behavior on the client side to support
version skew when talking to old servers that set the annotation.
However, the new server-side behavior is still to NOT set the
annotation.
Currently, TCPSocketAction always uses Pod's IP in connection. But when a
pod uses the host network, sometimes firewall rules may prevent kubelet
from connecting through the Pod's IP. This PR introduces the 'Host' field
for TCPSocketAction, and if it is set to non-empty string, the probe will
be performed on the configured host rather than the Pod's IP. This gives
users an opportunity to explicitly specify 'localhost' as the target for
the above situations.
Automatic merge from submit-queue (batch tested with PRs 42443, 38924, 42367, 42391, 42310)
Dell EMC ScaleIO Volume Plugin
**What this PR does / why we need it**
This PR implements the Kubernetes volume plugin to allow pods to seamlessly access and use data stored on ScaleIO volumes. [ScaleIO](https://www.emc.com/storage/scaleio/index.htm) is a software-based storage platform that creates a pool of distributed block storage using locally attached disks on every server. The code for this PR supports persistent volumes using PVs, PVCs, and dynamic provisioning.
You can find examples of how to use and configure the ScaleIO Kubernetes volume plugin in [examples/volumes/scaleio/README.md](examples/volumes/scaleio/README.md).
**Special notes for your reviewer**:
To facilitate code review, commits for source code implementation are separated from other artifacts such as generated, docs, and vendored sources.
```release-note
ScaleIO Kubernetes Volume Plugin added enabling pods to seamlessly access and use data stored on ScaleIO volumes.
```
Automatic merge from submit-queue
fix kubectl describe pod, show tolerationSeconds
**What this PR does / why we need it**:
tolerationSeconds is now not shown in kubectl describe resutl, this PR is to fix it.
With this fix, pod toleration with tolerationSeconds would like below:
```yaml
Name: bar
Namespace: foo
Node: /
Labels: <none>
Status:
IP:
Controllers: <none>
Containers: <none>
No volumes.
QoS Class:
Node-Selectors: <none>
Tolerations: key1=value1
key2=value2:NoSchedule
key3=value3:NoExecute for 300s
```
**Which issue this PR fixes** :
Related issue: #1574
Related PR: #39469
**Special notes for your reviewer**:
**Release note**:
```release-note
make kubectl describe pod show tolerationSeconds
```
- Add a new type PortworxVolumeSource
- Implement the kubernetes volume plugin for Portworx Volumes under pkg/volume/portworx
- The Portworx Volume Driver uses the libopenstorage/openstorage specifications and apis for volume operations.
Changes for k8s configuration and examples for portworx volumes.
- Add PortworxVolume hooks in kubectl, kube-controller-manager and validation.
- Add a README for PortworxVolume usage as PVs, PVCs and StorageClass.
- Add example spec files
Handle code review comments.
- Modified READMEs to incorporate to suggestions.
- Add a test for ReadWriteMany access mode.
- Use util.UnmountPath in TearDown.
- Add ReadOnly flag to PortworxVolumeSource
- Use hostname:port instead of unix sockets
- Delete the mount dir in TearDown.
- Fix link issue in persistentvolumes README
- In unit test check for mountpath after Setup is done.
- Add PVC Claim Name as a Portworx Volume Label
Generated code and documentation.
- Updated swagger spec
- Updated api-reference docs
- Updated generated code under pkg/api/v1
Godeps update for Portworx Volume Driver
- Adds github.com/libopenstorage/openstorage
- Adds go.pedge.io/pb/go/google/protobuf
- Updates Godep Licenses
zhangxiaoyu-zidif