Commit Graph

23 Commits (e5e1a674ce4e8772eebbb99f119a78b38dfc01c4)

Author SHA1 Message Date
Brad Davidson ece4d8e45c Fix tests to not hide failure location in dummp assert functions
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
2023-04-04 12:02:22 -07:00
Brad Davidson e54ceaa497 Fix issue with stale connections to removed LB server
Track LB connections through each server so that they can be closed when it is removed.

Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
2023-04-04 12:02:22 -07:00
Derek Nola 06d81cb936
Replace deprecated ioutil package (#6230)
* Replace ioutil package
* check integration test null pointer
* Remove rotate retries

Signed-off-by: Derek Nola <derek.nola@suse.com>
2022-10-07 17:36:57 -07:00
Brad Davidson c8447dca56 Bump golang to 1.18.1
Also update all use of 'go get' => 'go install', update CI tooling for
1.18 compatibility, and gofmt everything so lint passes.

Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
2022-05-11 14:39:07 -07:00
Brad Davidson b12cd62935 Move IPv4/v6 selection into helpers
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
2022-04-15 01:02:42 -07:00
Dirk Müller fa0fa8b1d0 Update golangci-lint to 1.45.2
This requires a further set of gofmt -s improvements to the
code, but nothing major. golangci-lint 1.45.2 brings golang 1.18
support which might be needed in the future.

Signed-off-by: Dirk Müller <dirk@dmllr.de>
2022-04-13 14:48:42 -07:00
Roberto Bonafiglia 06c779c57d Fixed loadbalancer in case of IPv6 addresses
Signed-off-by: Roberto Bonafiglia <roberto.bonafiglia@suse.com>
2022-03-31 11:49:30 +02:00
Luther Monson 9a849b1bb7
[master] changing package to k3s-io (#4846)
* changing package to k3s-io

Signed-off-by: Luther Monson <luther.monson@gmail.com>

Co-authored-by: Derek Nola <derek.nola@suse.com>
2022-03-02 15:47:27 -08:00
Brad Davidson 5014c9e0e8 Fix adding etcd-only node to existing cluster
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
2022-02-28 19:56:08 -08:00
Brad Davidson e95b75409a Fix lint failures
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
2021-08-20 18:47:16 -07:00
Hussein Galal e322924781
Reset load balancer state during restoraion (#3877)
* Reset load balancer state during restoraion

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* Reset load balancer state during restoraion

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>
2021-08-18 01:02:30 +02:00
Derek Nola 21c8a33647
Introduction of Integration Tests (#3695)
* Commit of new etcd snapshot integration tests.
* Updated integration github action to not run on doc changes.
* Update Drone runner to only run unit tests

Signed-off-by: dereknola <derek.nola@suse.com>
2021-07-26 09:59:33 -07:00
William Zhang a4c992ce52 🐳 burp to inetaf/tcpproxy
Problem:
    tcpproxy repository has been moved out of the github.com/google org to github.com/inetaf.

    Solution:
    Switch to the new repo.
    FYI: https://godoc.org/inet.af/tcpproxy/

Signed-off-by: William Zhang <warmchang@outlook.com>
2021-07-08 16:58:09 -07:00
Jamie Phillips 7345ac35ae
Initial windows support for agent (#3375)
Signed-off-by: Jamie Phillips <jamie.phillips@suse.com>
2021-06-01 12:29:46 -07:00
Brad Davidson c0d129003b Handle loadbalancer port in TIME_WAIT
If the port wanted by the client load balancer is in TIME_WAIT, startup
will fail. Set SO_REUSEPORT so that it can be listened on again
immediately.

The configurable Listen call wants a context, so plumb that through as
well.

Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
2021-03-08 17:05:25 -08:00
Brad Davidson 7cdfaad6ce
Always use static ports for client load-balancers (#3026)
* Always use static ports for the load-balancers

This fixes an issue where RKE2 kube-proxy daemonset pods were failing to
communicate with the apiserver when RKE2 was restarted because the
load-balancer used a different port every time it started up.

This also changes the apiserver load-balancer port to be 1 below the
supervisor port instead of 1 above it. This makes the apiserver port
consistent at 6443 across servers and agents on RKE2.

Additional fixes below were required to successfully test and use this change
on etcd-only nodes.

* Actually add lb-server-port flag to CLI
* Fix nil pointer when starting server with --disable-etcd but no --server
* Don't try to use full URI as initial load-balancer endpoint
* Fix etcd load-balancer pool updates
* Update dynamiclistener to fix cert updates on etcd-only nodes
* Handle recursive initial server URL in load balancer
* Don't run the deploy controller on etcd-only nodes
2021-03-06 02:29:57 -08:00
Hussein Galal 5749f66aa3
Add disable flags for control components (#2900)
* Add disable flags to control components

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* golint

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* more fixes

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* fixes to disable flags

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* Add comments to functions

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* Fix joining problem

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* more fixes

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* golint

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* fix ticker

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* fix role labels

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* more fixes

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>
2021-02-12 17:35:57 +02:00
Erik Wilson 992ca52c31
Enable go test in ci 2020-11-05 09:48:53 -07:00
Erik Wilson 720197b9b1
Fix linting issues 2020-08-28 17:18:29 -07:00
Darren Shepherd 7e59c0801e Make program name a variable to be changed at compile time 2020-06-06 16:39:41 -07:00
Darren Shepherd 2f5ee914f9 Add supervisor port
In k3s today the kubernetes API and the /v1-k3s API are combined into
one http server.  In rke2 we are running unmodified, non-embedded Kubernetes
and as such it is preferred to run k8s and the /v1-k3s API on different
ports.  The /v1-k3s API port is called the SupervisorPort in the code.

To support this separation of ports a new shim was added on the client in
then pkg/agent/proxy package that will launch two load balancers instead
of just one load balancer.  One load balancer for 6443 and the other
for 9345 (which is the supervisor port).
2020-05-05 15:54:51 -07:00
Erik Wilson 98254a3412 Change load balancer logging to debug 2019-08-08 10:48:11 -07:00
Erik Wilson a17e336993 Use go tcpproxy 2019-07-30 09:53:15 -07:00