Automatic merge from submit-queue
Split inflight requests into read-only and mutating groups
cc @smarterclayton @lavalamp @caesarxuchao
```release-note
API server have two separate limits for read-only and mutating inflight requests.
```
Automatic merge from submit-queue
plumb in front proxy group header
Builds on https://github.com/kubernetes/kubernetes/pull/36662 and https://github.com/kubernetes/kubernetes/pull/36774, so only the last commit is unique.
This completes the plumbing for front proxy header information and makes it possible to add just the front proxy header authenticator.
WIP because I'm going to assess it in use downstream.
Automatic merge from submit-queue
kubectl top pod|node should handle when Heapster is somewhere else
OpenShift runs Heapster on HTTPS, which means `top node` and `top pod`
are broken because they hardcode 'http' as the scheme. Provide an
options struct allowing users to specify `--heapster-namespace`,
`--heapster-service`, `--heapster-scheme`, and `--heapster-port` to the
commands (leveraging the existing defaults).
@kubernetes/sig-metrics makes top a little more useful in other spots
Automatic merge from submit-queue (batch tested with PRs 35300, 36709, 37643, 37813, 37697)
Add generated informers
Add informer-gen and the informers it generates. We'll do follow-up PRs to convert everything currently using the hand-written informers to the generated ones.
TODO:
- [x] switch to `GroupVersionResource`
- [x] finish godoc
@deads2k @caesarxuchao @sttts @liggitt
Automatic merge from submit-queue
Add kubernetes-anywhere as a new e2e deployment option.
This change adds support for using `kubernetes-anywhere` as a deployment option for hack/e2e.go. This work is toward the larger goal of being able to run e2e tests against `kubeadm` clusters, which `kubernetes-anywhere` supports.
**Release note**:
```release-note
Add kubernetes-anywhere as a new e2e deployment option
```
The configuration in `getConfig()` comes mostly from the defaults in `kubernetes-anywhere`. In the future, we can add more plumbing to override them via CLI flags.
CC @mikedanese
Automatic merge from submit-queue
create service add create ExternalName service implementation
@kubernetes/kubectl create service add ExternalName support, refer #34731 for more detail.
```release-note
kubectl create service externalname
```
OpenShift runs Heapster on HTTPS, which means `top node` and `top pod`
are broken because they hardcode 'http' as the scheme. Provide an
options struct allowing users to specify `--heapster-namespace`,
`--heapster-service`, `--heapster-scheme`, and `--heapster-port` to the
commands (leveraging the existing defaults).
Automatic merge from submit-queue
move parts of the mega generic run struct out
This splits the main `ServerRunOptions` into composeable pieces that are bindable separately and adds easy paths for composing servers to run delegating authentication and authorization.
@sttts @ncdc alright, I think this is as far as I need to go to make the composing servers reasonable to write. I'll try leaving it here
Automatic merge from submit-queue
[Federation][join-flags] Add flags for cluster context and secret names while joining clusters to federation.
Vast majority of cluster contexts are not RFC 1123 subdomains. Since
cluster and secret names for the API objects are derived from the
cluster context name, there is no way for users to join clusters
with such context names to federation, unless they modify the context
name in their kubeconfigs itself. That's a lot of inconvenience and
entirely goes against the goal and beats the purpose of the `kubefed`
tool. So we are providing these flags to allow users to override these
values.
Also, since users register their clusters with federation, it is makes
sense in terms of user experience to make the cluster name a positional
argument because that feels more natural. Also, specifying cluster name
in the join command as a mandatory positional argument make
`kubefed join` consistent with `kubefed unjoin`. This also means
`--cluster-context` is now made a flag and defaults to cluster name if
unspecified.
`--secret-name` also defaults to the cluster name if unspecified.
Fixes: Issue #35954
cc @kubernetes/sig-cluster-federation @quinton-hoole @irfanurrehman
- Adds command line flags --config-map, --config-map-ns.
- Fixes 36194 (https://github.com/kubernetes/kubernetes/issues/36194)
- Update kube-dns yamls
- Update bazel (hack/update-bazel.sh)
- Update known command line flags
- Temporarily reference new kube-dns image (this will be fixed with
a separate commit when the DNS image is created)
Vast majority of cluster contexts are not RFC 1123 subdomains. Since
cluster and secret names for the API objects are derived from the
cluster context name, there is no way for users to join clusters
with such context names to federation, unless they modify the context
name in their kubeconfigs itself. That's a lot of inconvenience and
entirely goes against the goal and beats the purpose of the `kubefed`
tool. So we are providing these flags to allow users to override these
values.
Also, since users register their clusters with federation, it is makes
sense in terms of user experience to make the cluster name a positional
argument because that feels more natural. Also, specifying cluster name
in the join command as a mandatory positional argument make `kubefed
join` consistent with `kubefed unjoin`. This also means `--cluster-
context` is now made a flag and defaults to cluster name if unspecified.
`--secret-name` also defaults to the cluster name if unspecified.
Automatic merge from submit-queue
Add a flag allowing contention profiling of the API server
Useful for performance debugging.
cc @smarterclayton @timothysc @lavalamp
```release-note
Add a flag allowing contention profiling of the API server
```
Automatic merge from submit-queue
Make GCI nodes mount non tmpfs, ext* & bind mounts using an external mounter
This PR downloads the stage1 & gci-mounter ACIs as part of cluster bring up instead of downloading them dynamically from gcr.io, which was the cause for #36206.
I have also optimized the containerized mounter to pre-load the mounter image once to avoid fetch latency while using it.
Original PR which got reverted: https://github.com/kubernetes/kubernetes/pull/35821
```release-note
GCI nodes use an external mounter script to mount NFS & GlusterFS storage volumes
```
@mtaufen Node e2e is not re-enabled in this PR.
cc @jingxu97
Automatic merge from submit-queue
specify custom ca file to verify the keystone server
<!-- Thanks for sending a pull request! Here are some tips for you:
1. If this is your first time, read our contributor guidelines https://github.com/kubernetes/kubernetes/blob/master/CONTRIBUTING.md and developer guide https://github.com/kubernetes/kubernetes/blob/master/docs/devel/development.md
2. If you want *faster* PR reviews, read how: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/faster_reviews.md
3. Follow the instructions for writing a release note: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/pull-requests.md#release-notes
-->
**What this PR does / why we need it**:
Sometimes the keystone server's certificate is self-signed, mainly used for internal development, testing and etc.
For this kind of ca, we need a way to verify the keystone server.
Otherwise, below error will occur.
> x509: certificate signed by unknown authority
This patch provide a way to pass in a ca file to verify the keystone server when starting `kube-apiserver`.
**Which issue this PR fixes** : fixes#22695, #24984
**Special notes for your reviewer**:
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
``` release-note
```
Provides an opt-in flag, --experimental-fail-swap-on (and corresponding
KubeletConfiguration value, ExperimentalFailSwapOn), which is false by default.
If we have a public & private zone with the same name (which is common
on AWS), this means we can still create records. Also tighten up some
of the logic to allow for zones with duplicate names.
Automatic merge from submit-queue
Node Conformance Test: Add system verification
For #30122 and #29081.
This PR introduces system verification test in node e2e and conformance test. It will run before the real test. Once the system verification fails, the test will just fail. The output of the system verification is like this:
```
I0909 23:33:20.622122 2717 validators.go:45] Validating os...
OS: Linux
I0909 23:33:20.623274 2717 validators.go:45] Validating kernel...
I0909 23:33:20.624037 2717 kernel_validator.go:79] Validating kernel version
KERNEL_VERSION: 3.16.0-4-amd64
I0909 23:33:20.624146 2717 kernel_validator.go:93] Validating kernel config
CONFIG_NAMESPACES: enabled
CONFIG_NET_NS: enabled
CONFIG_PID_NS: enabled
CONFIG_IPC_NS: enabled
CONFIG_UTS_NS: enabled
CONFIG_CGROUPS: enabled
CONFIG_CGROUP_CPUACCT: enabled
CONFIG_CGROUP_DEVICE: enabled
CONFIG_CGROUP_FREEZER: enabled
CONFIG_CGROUP_SCHED: enabled
CONFIG_CPUSETS: enabled
CONFIG_MEMCG: enabled
I0909 23:33:20.679328 2717 validators.go:45] Validating cgroups...
CGROUPS_CPU: enabled
CGROUPS_CPUACCT: enabled
CGROUPS_CPUSET: enabled
CGROUPS_DEVICES: enabled
CGROUPS_FREEZER: enabled
CGROUPS_MEMORY: enabled
I0909 23:33:20.679454 2717 validators.go:45] Validating docker...
DOCKER_GRAPH_DRIVER: aufs
```
It verifies the system following a predefined `SysSpec`:
``` go
// DefaultSysSpec is the default SysSpec.
var DefaultSysSpec = SysSpec{
OS: "Linux",
KernelVersion: []string{`3\.[1-9][0-9].*`, `4\..*`}, // Requires 3.10+ or 4+
// TODO(random-liu): Add more config
KernelConfig: KernelConfig{
Required: []string{
"NAMESPACES", "NET_NS", "PID_NS", "IPC_NS", "UTS_NS",
"CGROUPS", "CGROUP_CPUACCT", "CGROUP_DEVICE", "CGROUP_FREEZER",
"CGROUP_SCHED", "CPUSETS", "MEMCG",
},
Forbidden: []string{},
},
Cgroups: []string{"cpu", "cpuacct", "cpuset", "devices", "freezer", "memory"},
RuntimeSpec: RuntimeSpec{
DockerSpec: &DockerSpec{
Version: []string{`1\.(9|\d{2,})\..*`}, // Requires 1.9+
GraphDriver: []string{"aufs", "overlay", "devicemapper"},
},
},
}
```
Currently, it only supports:
- Kernel validation: version validation and kernel configuration validation
- Cgroup validation: validating whether required cgroups subsystems are enabled.
- Runtime Validation: currently, only validates docker graph driver.
The validating framework is ready. The specific validation items could be added over time.
@dchen1107
/cc @kubernetes/sig-node
Automatic merge from submit-queue
New command: "kubeadm token generate"
As part of #33930, this PR adds a new top-level command to kubeadm to just generate a token for use with the init/join commands. Otherwise, users are left to either figure out how to generate a token on their own, or let `kubeadm init` generate a token, capture and parse the output, and then use that token for `kubeadm join`.
At this point, I was hoping for feedback on the CLI experience, and then I can add tests. I spoke with @mikedanese and he didn't like the original propose of `kubeadm util generate-token`, so here are the runners up:
```
$ kubeadm generate-token # <--- current implementation
$ kubeadm generate token # in case kubeadm might generate other things in the future?
$ kubeadm init --generate-token # possibly as a subcommand of an existing one
```
Currently, the output is simply the token on one line without any padding/formatting:
```
$ kubeadm generate-token
1087fd.722b60cdd39b1a5f
```
CC: @kubernetes/sig-cluster-lifecycle
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
``` release-note
New kubeadm command: generate-token
```
Automatic merge from submit-queue
make using service account credentials from controllers optional
Adds a flag to make the "SA per controller" behavior optional.
Automatic merge from submit-queue
[Kubelet] Use the custom mounter script for Nfs and Glusterfs only
This patch reduces the scope for the containerized mounter to NFS and GlusterFS on GCE + GCI clusters
This patch also enabled the containerized mounter on GCI nodes
Shepherding multiple PRs through the submit queue is painful. Hence I combined them into this PR. Please review each commit individually.
cc @jingxu97 @saad-ali
https://github.com/kubernetes/kubernetes/pull/35652 has also been reverted as part of this PR
Automatic merge from submit-queue
[Federation][join-01] Implement `kubefed join` command.
Supersedes PR #35155.
Please review only the last commit here. This is based on PR #35492 which will be reviewed independently.
I will add a release note separately for this entire feature, so please don't worry too much about the release note here in the PR.
Design Doc: PR #34484
cc @kubernetes/sig-cluster-federation @quinton-hoole @mwielgus
Along the way: Fix ginkgo-e2e.sh. This change got dropped in the
original PR, but it was meant to allow a conformance-style
kubectl-auth test and still have a legit cloud provider.
We can put subdomains into hosted zones (for example,
foo.federation.example.com can be hosted in example.com)
By allowing sharing a common hosted zone, this means the user doesn't
have to do as much setup.
In order to be able to use new mounter library, this PR adds the
mounterPath flag to kubelet which passes the flag to the mount
interface. If flag is empty, mount uses default mount path.
Automatic merge from submit-queue
WIP: Remove the legacy networking mode
<!-- Thanks for sending a pull request! Here are some tips for you:
1. If this is your first time, read our contributor guidelines https://github.com/kubernetes/kubernetes/blob/master/CONTRIBUTING.md and developer guide https://github.com/kubernetes/kubernetes/blob/master/docs/devel/development.md
2. If you want *faster* PR reviews, read how: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/faster_reviews.md
3. Follow the instructions for writing a release note: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/pull-requests.md#release-notes
-->
**What this PR does / why we need it**:
Removes the deprecated configure-cbr0 flag and networking mode to avoid having untested and maybe unstable code in kubelet, see: #33789
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, #<issue_number>, ...)` format, will close that issue when PR gets merged)*:
fixes#30589fixes#31937
**Special notes for your reviewer**: There are a lot of deployments who rely on this networking mode. Not sure how we deal with that: force switch to kubenet or just delete the old deployment?
But please review the code changes first (the first commit)
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```release-note
Removed the deprecated kubelet --configure-cbr0 flag, and with that the "classic" networking mode as well
```
PTAL @kubernetes/sig-network @kubernetes/sig-node @mikedanese
Automatic merge from submit-queue
Add flags for alternative API and discovery ports
**What this PR does / why we need it**:
We had many issues reported due to the fact that we are using port 443 by default, and we should allow users to override whatever defaults we pick. This doesn't touch on `localhost:8080` yet, which should just generally get rid of.
**Which issue this PR fixes**: fixes#34311#34307#33638
**Special notes for your reviewer**: cc @pires
**Release note**:
```release-note
Add `kubeadm` flags `--api-port` and `--discovery-port`, change default API port to 6443
```
Automatic merge from submit-queue
clientgen: allow to pass custom apiPath when generating client sets
This PR allow to pass the `--clientset-api-path` parameter to clientgen that allows to customize the default API path set in clients. This allows projects like OpenShift to re-use the client with different API path (`/oapi` in our case).
Automatic merge from submit-queue
kubeadm implement preflight checks
Checks that user running kubeamd init and join is root and will only execute
command if user is root. Moved away from using kubectl error handling to
having kubeadm handle its own errors. This should allow kubeadm to have
more meaningful errors, exit codes, and logging for specific kubeadm use
cases.
fixes#33908
Add skip-preflight-checks to known flags.
Fix bug with preflight checks not returning system is-active as errors.
Fix error handling to use correct function.
Automatic merge from submit-queue
kube-dns: Add --dns-bind-address flag
Currently, `kube-dns` always binds to `0.0.0.0` when starting the SkyDNS server. Sometimes it's useful to have it bind to a different address for testing. So add a new `--dns-bind-address` flag that can be used to configure this (default is `0.0.0.0`).
Automatic merge from submit-queue
Add cgroup-driver and cgroups-per-qos flags to kubelet
Add the flags needed to support pod-level cgroups to kubelet.
/cc @vishh @dchen1107 @dubstack
Automatic merge from submit-queue
add delete-namespace-on-failure flag
I have been doing this for a while.
Setting `--delete-namespace=false --clean-start=true` only works if you have only one e2e test running in a loop.
This PR lets someone to set `delete-namespace-on-failure=false` and run multiple tests in parallel and preserve the crime scene. It makes it easier to reproduce failures.
Let me know if this is worth it or there are some other tricks I am not aware.
Automatic merge from submit-queue
Add option to set a service nodeport
**Release note**:
```release-note
Add kubectl --node-port option for specifying the service nodeport
```
This patch adds the option to set a nodeport when creating a NodePort
service. In case of a port allocation error due to a specified port
being out of the valid range, the error now includes the valid
range. If a `--node-port` value is not specified, it defaults to zero, in
which case the allocator will default to its current behavior of
assigning an available port.
This patch also adds a new helper function in `cmd/util/helpers.go` to
retrieve `Int32` cobra flags.
**Example**
```
# create a nodeport service with an invalid port
$ kubectl create service nodeport mynodeport --tcp=8080:7777 --node-port=1
The Service "mynodeport" is invalid: spec.ports[0].nodePort: Invalid
value: 1: provided port is not in the valid range. Valid ports range
from 30000-32767
# create a nodeport service with a valid port
$ kubectl create service nodeport mynodeport --tcp=8080:7777 --node-port=30000
service "mynodeport" created
# create a nodeport service with a port already in use
$ kubectl create service nodeport mynodeport --tcp=8080:7777 --node-port=30000
The Service "mynodeport" is invalid: spec.ports[0].nodePort: Invalid value: 3000: provided port is already allocated
$ kubectl describe service mynodeport
Name: mynodeport
Namespace: default
Labels: app=mynodeport
Selector: app=mynodeport
Type: NodePort
IP: 172.30.81.254
Port: 8080-7777 8080/TCP
NodePort: 8080-7777 30000/TCP
Endpoints: <none>
Session Affinity: None
No events.
```
@fabianofranz
This adds a flag to override the version we're deploying with kops for
e2es. (The kops experience is disconnected from the actual source tree
we're running tests from, which is similar to GKE.)
Automatic merge from submit-queue
Allow anonymous API server access, decorate authenticated users with system:authenticated group
When writing authorization policy, it is often necessary to allow certain actions to any authenticated user. For example, creating a service or configmap, and granting read access to all users
It is also frequently necessary to allow actions to any unauthenticated user. For example, fetching discovery APIs might be part of an authentication process, and therefore need to be able to be read without access to authentication credentials.
This PR:
* Adds an option to allow anonymous requests to the secured API port. If enabled, requests to the secure port that are not rejected by other configured authentication methods are treated as anonymous requests, and given a username of `system:anonymous` and a group of `system:unauthenticated`. Note: this should only be used with an `--authorization-mode` other than `AlwaysAllow`
* Decorates user.Info returned from configured authenticators with the group `system:authenticated`.
This is related to defining a default set of roles and bindings for RBAC (https://github.com/kubernetes/features/issues/2). The bootstrap policy should allow all users (anonymous or authenticated) to request the discovery APIs.
```release-note
kube-apiserver learned the '--anonymous-auth' flag, which defaults to true. When enabled, requests to the secure port that are not rejected by other configured authentication methods are treated as anonymous requests, and given a username of 'system:anonymous' and a group of 'system:unauthenticated'.
Authenticated users are decorated with a 'system:authenticated' group.
NOTE: anonymous access is enabled by default. If you rely on authentication alone to authorize access, change to use an authorization mode other than AlwaysAllow, or or set '--anonymous-auth=false'.
```
c.f. https://github.com/kubernetes/kubernetes/issues/29177#issuecomment-244191596
Contination of #1111
I tried to keep this PR down to just a simple search-n-replace to keep
things simple. I may have gone too far in some spots but its easy to
roll those back if needed.
I avoided renaming `contrib/mesos/pkg/minion` because there's already
a `contrib/mesos/pkg/node` dir and fixing that will require a bit of work
due to a circular import chain that pops up. So I'm saving that for a
follow-on PR.
I rolled back some of this from a previous commit because it just got
to big/messy. Will follow up with additional PRs
Signed-off-by: Doug Davis <dug@us.ibm.com>
This splits off all the bash stuff into an interface, and plumbs
through a separate interface to bring up a cluster using "kops"
instead. Right now it assumes kops == AWS.
Automatic merge from submit-queue
Allow secure access to apiserver from Admission Controllers
* Allow options.InsecurePort to be set to 0 to switch off insecure access
* In NewSelfClient, Set the TLSClientConfig to the cert and key files
if InsecurePort is switched off
* Mint a bearer token that allows the client(s) created in NewSelfClient
to talk to the api server
* Add a new authenticator that checks for this specific bearer token
Fixes#13598
Automatic merge from submit-queue
Viper direct bindings to TestContext struct with hierarchichal suppor…
Part of #31453 to support hierarchichal parameters. This one does so for density, paves way for other tests as well.
The new flag, if specified, and if --container-runtime=docker, switches
kubelet to use the new CRI implementation for testing. This is hidden flag
since the feature is still under heavy development and the flag may be changed
in the near future.
Automatic merge from submit-queue
Create a flag for route reconciliation and deprecate unused node-sync-…
cc @pwittrock to decide if it can go in 1.4. It's a zero risk cleanup, that will reduce confusion about cluster configuration.
Random-Liu