Automatic merge from submit-queue
refactor DeviceOpened() so it won't return error if device doesn't exist
<!-- Thanks for sending a pull request! Here are some tips for you:
1. If this is your first time, read our contributor guidelines https://github.com/kubernetes/kubernetes/blob/master/CONTRIBUTING.md and developer guide https://github.com/kubernetes/kubernetes/blob/master/docs/devel/development.md
2. If you want *faster* PR reviews, read how: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/faster_reviews.md
3. Follow the instructions for writing a release note: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/pull-requests.md#release-notes
-->
**What this PR does / why we need it**:
DeviceOpened() is called after device is unmounted but before detached. Some volumes such as rbd don't support 3rd party detach, they have to be detached during unmount. Once detached, the device path vanishes. This causes false alarm when DeviceOpened() is called.
The fix is to ignore error IsNotExist
**Which issue this PR fixes** _(optional, in `fixes #<issue number>(, #<issue_number>, ...)` format, will close that issue when PR gets merged)_: fixes #
**Special notes for your reviewer**:
@kubernetes/sig-storage
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
``` release-note
```
Signed-off-by: Huamin Chen hchen@redhat.com
See issue #33128
We can't rely on the device name provided by Cinder, and thus must perform
detection based on the drive serial number (aka It's cinder ID) on the
kubelet itself.
This patch re-works the cinder volume attacher to ignore the supplied
deviceName, and instead defer to the pre-existing GetDevicePath method to
discover the device path based on it's serial number and /dev/disk/by-id
mapping.
This new behavior is controller by a config option, as falling back
to the cinder value when we can't discover a device would risk devices
not showing up, falling back to cinder's guess, and detecting the wrong
disk as attached.
We are more liberal in what we accept as a volume id in k8s, and indeed
we ourselves generate names that look like `aws://<zone>/<id>` for
dynamic volumes.
This volume id (hereafter a KubernetesVolumeID) cannot directly be
compared to an AWS volume ID (hereafter an awsVolumeID).
We introduce types for each, to prevent accidental comparison or
confusion.
Issue #35746
This has been unused since 542f2dc7, and relies on deviceName, which
can no longer be relied upon (see issue #33128).
This needs to be removed now, as part of #33128, as the code can't be
updated to attempt device detection and fallback through to the Cinder
provided deviceName, as detection "fails" when the device is gone, and
if cinder has reported a deviceName that another volume has used in
relaity, then this will block forever (or until the other, unreleated,
volume has been detached)
Automatic merge from submit-queue
SELinux Overhaul
Overhauls handling of SELinux in Kubernetes. TLDR: Kubelet dir no longer has to be labeled `svirt_sandbox_file_t`.
Fixes#33351 and #33510. Implements #33951.
Automatic merge from submit-queue
Remove stale volumes if endpoint/svc creation fails.
Remove stale volumes if endpoint/svc creation fails.
Signed-off-by: Humble Chirammal hchiramm@redhat.com
Automatic merge from submit-queue
Require PV provisioner secrets to match type
In 1.5, PV provisioners are allowing targeting namespaced secrets via storageclass params. This adds a requirement that those secrets' type match the volume provisioner plugin name, to prevent targeting and extraction of arbitrary secrets
Helps limit secret targeting issues mentioned in https://github.com/kubernetes/kubernetes/issues/34822
Automatic merge from submit-queue
Add sync state loop in master's volume reconciler
At master volume reconciler, the information about which volumes are
attached to nodes is cached in actual state of world. However, this
information might be out of date in case that node is terminated (volume
is detached automatically). In this situation, reconciler assume volume
is still attached and will not issue attach operation when node comes
back. Pods created on those nodes will fail to mount.
This PR adds the logic to periodically sync up the truth for attached
volumes kept in
the actual state cache. If the volume is no longer attached to the node,
the actual state will be updated to reflect the truth. In turn,
reconciler will take actions if needed.
To avoid issuing many concurrent operations on cloud provider, this PR
tries to add batch operation to check whether a list of volumes are
attached to the node instead of one request per volume.
At master volume reconciler, the information about which volumes are
attached to nodes is cached in actual state of world. However, this
information might be out of date in case that node is terminated (volume
is detached automatically). In this situation, reconciler assume volume
is still attached and will not issue attach operation when node comes
back. Pods created on those nodes will fail to mount.
This PR adds the logic to periodically sync up the truth for attached volumes kept in the actual state cache. If the volume is no longer attached to the node, the actual state will be updated to reflect the truth. In turn, reconciler will take actions if needed.
To avoid issuing many concurrent operations on cloud provider, this PR
tries to add batch operation to check whether a list of volumes are
attached to the node instead of one request per volume.
More details are explained in PR #33760
When kubelet restarts, all the information about the volumes will be
gone from actual/desired states. When update node status with mounted
volumes, the volume list might be empty although there are still volumes
are mounted and in turn causing master to detach those volumes since
they are not in the mounted volumes list. This fix is to make sure only
update mounted volumes list after reconciler starts sync states process.
This sync state process will scan the existing volume directories and
reconstruct actual states if they are missing.
This PR also fixes the problem during orphaned pods' directories. In
case of the pod directory is unmounted but has not yet deleted (e.g.,
interrupted with kubelet restarts), clean up routine will delete the
directory so that the pod directoriy could be cleaned up (it is safe to
delete directory since it is no longer mounted)
The third issue this PR fixes is that during reconstruct volume in
actual state, mounter could not be nil since it is required for creating
container.VolumeMap. If it is nil, it might cause nil pointer exception
in kubelet.
Details are in proposal PR #33203
Don't store Gluster SotrageClass parameters in annotations, it's insecure.
Instead, expect that there is the StorageClass available at the time
when it's needed by Gluster deleter.
Gluster provisioner is interested in pvc.Namespace and I don't want to add
at as a new field in VolumeOptions - it would contain almost whole PVC.
Let's pass direct reference to PVC instead and let the provisioner to pick
information it is interested in.
Automatic merge from submit-queue
Dynamic provisioning for flocker volume plugin
Refactor flocker volume plugin
* [x] Support provisioning beta (#29006)
* [x] Support deletion
* [x] Use bind mounts instead of /flocker in containers
* [x] support ownership management or SELinux relabeling.
* [x] adds volume specification via datasetUUID (this is guranted to be unique)
I based my refactor work to replicate pretty much GCE-PD behaviour
**Related issues**: #29006#26908
@jsafrane @mattbates @wallrj @wallnerryan
Automatic merge from submit-queue
Use strongly-typed types.NodeName for a node name
We had another bug where we confused the hostname with the NodeName.
Also, if we want to use different values for the Node.Name (which is
an important step for making installation easier), we need to keep
better control over this.
A tedious but mechanical commit therefore, to change all uses of the
node name to use types.NodeName
We had another bug where we confused the hostname with the NodeName.
To avoid this happening again, and to make the code more
self-documenting, we use types.NodeName (a typedef alias for string)
whenever we are referring to the Node.Name.
A tedious but mechanical commit therefore, to change all uses of the
node name to use types.NodeName
Also clean up some of the (many) places where the NodeName is referred
to as a hostname (not true on AWS), or an instanceID (not true on GCE),
etc.
Automatic merge from submit-queue
Use secrets for glusterfs provisioning passwords
- no plain password in StorageClass!
- fix the style along the way
- use PV annotations to pass the configuration from provisioners to deleters, inspired by Ceph RBD provisioning.
~~Proposing 1.4:~~
~~- GlusterFS provisioning is a new 1.4 feature~~
~~- if we release GlusterFS provisioner as it is now, we need to support it's API (i.e. plaintext passwords) until 2.0~~
~~- it can break only GlusterFS provisioning, nothing else~~
~~- it's easy to revert~~
@kubernetes/sig-storage
fixes#31871
Automatic merge from submit-queue
Do not report error when deleting an attached volume
Persistent volume controller should not send warning events to a PV and mark the PV as failed when the volume is still attached.
This happens when a user quickly deletes a pod and associated PVC - PV is slowly detaching, while the PVC is already deleted and the PV enters Failed phase.
`Deleter.Deleter` can now return `tryAgainError`, which is sent as INFO to the PV to let the user know we did not forget to delete the PV, however the PV stays in Released state. The controller tries again in the next sync (15 seconds by default).
Fixes#31511
Automatic merge from submit-queue
Send recycle events from pod to pv.
This allows users to diagnose what's wrong with recycler. Recycler pods are started automatically with a cryptic name and they are deleted immediately when they finish.
e.g, `kubectl describe pv` could show that NFS cannot be mounted (and how many pods have tried it):
```
FirstSeen LastSeen Count From SubobjectPath Type Reason Message
--------- -------- ----- ---- ------------- -------- ------ -------
59m 59m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(5421800e-347b-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
53m 53m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(3c9809e5-347c-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
46m 46m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(250dd2a2-347d-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
40m 40m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(0d84ea33-347e-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
33m 33m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(f5fb63bf-347e-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
27m 27m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(de7128fd-347f-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
1h 3m 75 {persistentvolume-controller } Normal RecyclerPod Recycler pod: Successfully assigned recycler-for-nfs to 127.0.0.1
1h 3m 76 {persistentvolume-controller } Normal RecyclerPod Recycler pod: Pod was active on the node longer than specified deadline
1h 1m 12 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Error syncing pod, skipping: timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
20m 1m 4 {persistentvolume-controller } Warning RecyclerPod (events with common reason combined)
```
These steps were necessary:
- added event watcher to volume.RecycleVolumeByWatchingPodUntilCompletion
- pass all these events through volume plugins to volume controller
- rework volume.RecycleVolumeByWatchingPodUntilCompletion unit tests to a table (too much copy-paste)
- fix all unit tests along the way
Automatic merge from submit-queue
Support Quobyte as StorageClass
This PR allows Users to use Quobyte as StorageClass for dynamic volume provisioning and implements the Provisioner/Deleter Interface.
@quolix @kubernetes/sig-storage @rootfs
Automatic merge from submit-queue
Disambiguate unsupported metrics from metrics errors
**What this PR does / why we need it**:
Stop logging "metrics are not supported for MetricsNil Volumes" as it spams the log.
**Which issue this PR fixes**
fixes#20676, fixes#27373
**Special notes for your reviewer**:
None
**Release note**:
```release-note
Don't log "metrics are not supported for MetricsNil Volumes"
```
Automatic merge from submit-queue
Change the default volume type of GlusterFS provisioner.
At present provisioner creates 'Distribute' Volume and this patch change the default
volume type 'Distribute Replica:(3)' volume.
At present, provisioner creates Distribute Volume and this patch
change the default volume type to Distribute-Replica(3) volume.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
Automatic merge from submit-queue
Fix race condition in updating attached volume between master and node
This PR tries to fix issue #29324. The cause of this issue is that a race
condition happens when marking volumes as attached for node status. This
PR tries to clean up the logic of when and where to mark volumes as
attached/detached. Basically the workflow as follows,
1. When volume is attached sucessfully, the volume and node info is
added into nodesToUpdateStatusFor to mark the volume as attached to the
node.
2. When detach request comes in, it will check whether it is safe to
detach now. If the check passes, remove the volume from volumesToReportAsAttached
to indicate the volume is no longer considered as attached now.
Afterwards, reconciler tries to update node status and trigger detach
operation. If any of these operation fails, the volume is added back to
the volumesToReportAsAttached list showing that it is still attached.
These steps should make sure that kubelet get the right (might be
outdated) information about which volume is attached or not. It also
garantees that if detach operation is pending, kubelet should not
trigger any mount operations.
This PR tries to fix issue #29324. This cause of this issue is a race
condition happens when marking volumes as attached for node status. This
PR tries to clean up the logic of when and where to mark volumes as
attached/detached. Basically the workflow as follows,
1. When volume is attached sucessfully, the volume and node info is
added into nodesToUpdateStatusFor to mark the volume as attached to the
node.
2. When detach request comes in, it will check whether it is safe to
detach now. If the check passes, remove the volume from volumesToReportAsAttached
to indicate the volume is no longer considered as attached now.
Afterwards, reconciler tries to update node status and trigger detach
operation. If any of these operation fails, the volume is added back to
the volumesToReportAsAttached list showing that it is still attached.
These steps should make sure that kubelet get the right (might be
outdated) information about which volume is attached or not. It also
garantees that if detach operation is pending, kubelet should not
trigger any mount operations.
Automatic merge from submit-queue
support storage class in Ceph RBD volume
replace WIP PR #30959, using PV annotation idea from @jsafrane
@kubernetes/sig-storage @johscheuer @elsonrodriguez
This allows users to diagnose what's wrong with recycler. Recycler pods are
started automatically with a cryptic name and they are deleted immediately
when they finish.
kubectl describe pods will show:
FirstSeen LastSeen Count From SubobjectPath Type Reason Message
--------- -------- ----- ---- ------------- -------- ------ -------
59m 59m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(5421800e-347b-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
53m 53m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(3c9809e5-347c-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
46m 46m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(250dd2a2-347d-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
40m 40m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(0d84ea33-347e-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
33m 33m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(f5fb63bf-347e-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
27m 27m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(de7128fd-347f-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
1h 3m 75 {persistentvolume-controller } Normal RecyclerPod Recycler pod: Successfully assigned recycler-for-nfs to 127.0.0.1
1h 3m 76 {persistentvolume-controller } Normal RecyclerPod Recycler pod: Pod was active on the node longer than specified deadline
1h 1m 12 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Error syncing pod, skipping: timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
20m 1m 4 {persistentvolume-controller } Warning RecyclerPod (events with common reason combined)
These steps were necessary:
- added event watcher to volume.RecycleVolumeByWatchingPodUntilCompletion
- pass all these events through volume plugins to volume controller
- rework volume.RecycleVolumeByWatchingPodUntilCompletion unit tests to a table
(too much copy-paste)
- fix all unit tests along the way
Automatic merge from submit-queue
Make @rootfs the assignee for various volumes
This, combined with the '/lgtm' capability of reviewers means you can approve
PRs. @rootfs - I assume you're OK with this?
Automatic merge from submit-queue
Post event message for volume attachment
This PR is to add event message when attaching volume fails to help
users to debug. For detach failure, may address in a different PR since
it requires more data structure change.
This PR is to add event message when attaching volume fails to help
users to debug. For detach failure, may address in a different PR since
it requires more data structure change.
Automatic merge from submit-queue
Implements Attacher Plugin Interface for vSphere
This PR does the following,
Fixes#29028 (vsphere volume should implement attacher interface): Implements Attacher Plugin Interface for vSphere.
See file:
pkg/volume/vsphere_volume/vsphere_volume.go. - Removed attach and detach calls from SetupAt and TearDownAt.
pkg/volume/vsphere_volume/attacher.go. - Implements Attacher & Detacher Plugin Interface for vSphere. (Ref :- GCE_PD & AWS attacher.go)
pkg/cloudproviders/provider/vsphere.go - Added DiskIsAttach method.
The vSphere plugin code needs clean up. (ex: The code for getting vSphere instance is repeated in file pkg/cloudprovider/providers/vsphere.go). I will fix this in next PR.
Automatic merge from submit-queue
Fix coding style
cc @pmorie
**What this PR does / why we need it**: Fixes case on a variable name, it's simple and adjust the code to the coding style.
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```NONE
```
Automatic merge from submit-queue
Add encryption to EBS dynamic provisioner
Resolves https://github.com/kubernetes/kubernetes/issues/30792
Adds encryption to the EBS cloud provider and provisioner.
Follow up to #29006 (all commits but the one in this PR will drop out).
@kubernetes/sig-storage
```release-note
```
The serviceAccountName is occasionally useful for clients running on
Kube that need to know who they are when talking to other components.
The nodeName is useful for PetSet or DaemonSet pods that need to make
calls back to the API to fetch info about their node.
Both fields are immutable, and cannot easily be retrieved in another
way.
Automatic merge from submit-queue
Add ismounted check in unmountpath function
This change is to fix PR #30930. The function should check if the
mountpath is still mounted or not. If it is not, it should continue with
removing the directory instead of returning error.
This change is for fixing PR #30930. The function should check if the
mountpath is still mounted or not. If it is not, it should continue with
removing the directory instead of returning error.
Automatic merge from submit-queue
Adds myself to the flocker volume plugin owners
I am happy to look after the flocker volume plugin and support @agonzalezro. Currently refactoring the volume plugin and adding dynamic provisioning features in #31005
Automatic merge from submit-queue
Add Events for operation_executor to show status of mounts, failed/successful to show in describe events
Fixes#27590
@saad-ali @pmorie @erinboyd
After talking with @pmorie last week about the above issue, I decided to poke around and see if I could remedy. The refactoring broke my previous UXP merged PR's that correctly showed failed mount errors in the describe events. However, Not sure I implemented correctly, but it tested out and seems to be working, let me know what I missed or if this is not the correct approach.
```
Events:
FirstSeen LastSeen Count From SubobjectPath Type Reason Message
--------- -------- ----- ---- ------------- -------- ------ -------
2m 2m 1 {default-scheduler } Normal Scheduled Successfully assigned nfs-bb-pod1 to 127.0.0.1
44s 44s 1 {kubelet 127.0.0.1} Warning FailedMount Unable to mount volumes for pod "nfs-bb-pod1_default(a94f64f1-37c9-11e6-9aa5-52540073d346)": timeout expired waiting for volumes to attach/mount for pod "nfs-bb-pod1"/"default". list of unattached/unmounted volumes=[nfsvol]
44s 44s 1 {kubelet 127.0.0.1} Warning FailedSync Error syncing pod, skipping: timeout expired waiting for volumes to attach/mount for pod "nfs-bb-pod1"/"default". list of unattached/unmounted volumes=[nfsvol]
38s 38s 1 {kubelet } Warning FailedMount Unable to mount volumes for pod "a94f64f1-37c9-11e6-9aa5-52540073d346": Mount failed: exit status 32
Mounting arguments: nfs1.rhs:/opt/data99 /var/lib/kubelet/pods/a94f64f1-37c9-11e6-9aa5-52540073d346/volumes/kubernetes.io~nfs/nfsvol nfs []
Output: mount.nfs: Connection timed out
Resolution hint: Check and make sure the NFS Server exists (ensure that correct IPAddress/Hostname was given) and is available/reachable.
Also make sure firewall ports are open on both client and NFS Server (2049 v4 and 2049, 20048 and 111 for v3).
Use commands telnet <nfs server> <port> and showmount <nfs server> to help test connectivity.
```
Automatic merge from submit-queue
Quobyte Volume plugin
@quofelix and myself developed a volume plugin for [Quobyte](http://www.quobyte.com) which is a software-defined storage solution. This PR allows Kubernetes users to mount a Quobyte Volume inside their containers over Kubernetes.
Here are some further informations about [Quobyte and Storage for containers](http://www.quobyte.com/containers)
Automatic merge from submit-queue
Implement dynamic provisioning (beta) of PersistentVolumes via StorageClass
Implemented according to PR #26908. There are several patches in this PR with one huge code regen inside.
* Please review the API changes (the first patch) carefully, sometimes I don't know what the code is doing...
* `PV.Spec.Class` and `PVC.Spec.Class` is not implemented, use annotation `volume.alpha.kubernetes.io/storage-class`
* See e2e test and integration test changes - Kubernetes won't provision a thing without explicit configuration of at least one `StorageClass` instance!
* Multiple provisioning volume plugins can coexist together, e.g. HostPath and AWS EBS. This is important for Gluster and RBD provisioners in #25026
* Contradicting the proposal, `claim.Selector` and `volume.alpha.kubernetes.io/storage-class` annotation are **not** mutually exclusive. They're both used for matching existing PVs. However, only `volume.alpha.kubernetes.io/storage-class` is used for provisioning, configuration of provisioning with `Selector` is left for (near) future.
* Documentation is missing. Can please someone write some while I am out?
For now, AWS volume plugin accepts classes with these parameters:
```
kind: StorageClass
metadata:
name: slow
provisionerType: kubernetes.io/aws-ebs
provisionerParameters:
type: io1
zone: us-east-1d
iopsPerGB: 10
```
* parameters are case-insensitive
* `type`: `io1`, `gp2`, `sc1`, `st1`. See AWS docs for details
* `iopsPerGB`: only for `io1` volumes. I/O operations per second per GiB. AWS volume plugin multiplies this with size of requested volume to compute IOPS of the volume and caps it at 20 000 IOPS (maximum supported by AWS, see AWS docs).
* of course, the plugin will use some defaults when a parameter is omitted in a `StorageClass` instance (`gp2` in the same zone as in 1.3).
GCE:
```
apiVersion: extensions/v1beta1
kind: StorageClass
metadata:
name: slow
provisionerType: kubernetes.io/gce-pd
provisionerParameters:
type: pd-standard
zone: us-central1-a
```
* `type`: `pd-standard` or `pd-ssd`
* `zone`: GCE zone
* of course, the plugin will use some defaults when a parameter is omitted in a `StorageClass` instance (SSD in the same zone as in 1.3 ?).
No OpenStack/Cinder yet
@kubernetes/sig-storage
Automatic merge from submit-queue
Allow setting permission mode bits on secrets, configmaps and downwardAPI files
cc @thockin @pmorie
Here is the first round to implement: https://github.com/kubernetes/kubernetes/pull/28733.
I made two commits: one with the actual change and the other with the auto-generated code. I think it's easier to review this way, but let me know if you prefer in some other way.
I haven't written any tests yet, I wanted to have a first glance and not write them till this (and the API) are more close to the "LGTM" :)
There are some things:
* I'm not sure where to do the "AND 0777". I'll try to look better in the code base, but suggestions are always welcome :)
* The write permission on group and others is not set when you do an `ls -l` on the running container. It does work with write permissions to the owner. Debugging seems to show that is something happening after this is correctly set on creation. Will look closer.
* The default permission (when the new fields are not specified) are the same that on kubernetes v1.3
* I do realize there are conflicts with master, but I think this is good enough to have a look. The conflicts is with the autog-enerated code, so the actual code is actually the same (and it takes like ~30 minutes to generate it here)
* I didn't generate the docs (`generated-docs` and `generated-swagger-docs` from `hack/update-all.sh`) because my machine runs out of mem. So that's why it isn't in this first PR, will try to investigate and see why it happens.
Other than that, this works fine here with some silly scripts I did to create a secret&configmap&downwardAPI, a pod and check the file permissions. Tested the "defaultMode" and "mode" for all. But of course, will write tests once this is looking fine :)
Thanks a lot again!
Rodrigo
This implements the proposal in:
docs/proposals/secret-configmap-downwarapi-file-mode.md
Fixes: #28317.
The mounttest image is updated so it returns the permissions of the linked file
and not the symlink itself.
Automatic merge from submit-queue
Fix default resource limits (node allocatable) for downward api volumes and env vars
@kubernetes/rh-cluster-infra @pmorie @derekwaynecarr
Automatic merge from submit-queue
Add volume reconstruct/cleanup logic in kubelet volume manager
Currently kubelet volume management works on the concept of desired
and actual world of states. The volume manager periodically compares the
two worlds and perform volume mount/unmount and/or attach/detach
operations. When kubelet restarts, the cache of those two worlds are
gone. Although desired world can be recovered through apiserver, actual
world can not be recovered which may cause some volumes cannot be cleaned
up if their information is deleted by apiserver. This change adds the
reconstruction of the actual world by reading the pod directories from
disk. The reconstructed volume information is added to both desired
world and actual world if it cannot be found in either world. The rest
logic would be as same as before, desired world populator may clean up
the volume entry if it is no longer in apiserver, and then volume
manager should invoke unmount to clean it up.
Fixes https://github.com/kubernetes/kubernetes/issues/27653
Currently kubelet volume management works on the concept of desired
and actual world of states. The volume manager periodically compares the
two worlds and perform volume mount/unmount and/or attach/detach
operations. When kubelet restarts, the cache of those two worlds are
gone. Although desired world can be recovered through apiserver, actual
world can not be recovered which may cause some volumes cannot be cleaned
up if their information is deleted by apiserver. This change adds the
reconstruction of the actual world by reading the pod directories from
disk. The reconstructed volume information is added to both desired
world and actual world if it cannot be found in either world. The rest
logic would be as same as before, desired world populator may clean up
the volume entry if it is no longer in apiserver, and then volume
manager should invoke unmount to clean it up.
Automatic merge from submit-queue
Verify volume.GetPath() never returns ""
Add a new helper method volume.GetPath(Mounter) instead of calling
the GetPath() of the Mounter directly. Check if GetPath() is returning
a "" and convert that into an error.
Fixes#23163
Automatic merge from submit-queue
Run goimport for the whole repo
While removing GOMAXPROC and running goimports, I noticed quite a lot of other files also needed a goimport format. Didn't commit `*.generated.go`, `*.deepcopy.go` or files in `vendor`
This is more for testing if it builds.
The only strange thing here is the gopkg.in/gcfg.v1 => github.com/scalingdata/gcfg replace.
cc @jfrazelle @thockin
Kubernetes Submit Queue