- /healthz will be served on 0.0.0.0:10256 by default.
- /metrics and /proxyMode will be served on port 10249
as before.
- Healthz handler will verify timestamp in iptables mode.
Automatic merge from submit-queue (batch tested with PRs 44590, 44969, 45325, 45208, 44714)
Fix onlylocal endpoint's healthcheck nodeport logic
I was in the middle of rebasing #41162, surprisingly found the healthcheck nodeport logic in kube-proxy is still buggy. Separate this fix out as it isn't GA related.
/assign @freehan @thockin
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
Edge-based userspace LB in kube-proxy
@thockin @bowei - if one of you could take a look if that PR doesn't break some basic kube-proxy assumptions. The similar change for winuserproxy should be pretty trivial.
And we should also do that for iptables, but that requires splitting the iptables code to syncProxyRules (which from what I know @thockin already started working on so we should probably wait for it to be done).
Automatic merge from submit-queue
Restore "Setting endpoints" log message
**What this PR does / why we need it**:
The "Setting endpoints" message from kube-proxy at high verbosity was
lost as part of a larger simplification in kubernetes/kubernetes#42747.
This change brings it back, simply outputting the just-constructed
addresses list.
I need this message to monitor delays in propagating endpoints changes across nodes.
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 43871, 44053)
Proxy healthchecks overhaul
The first commit is #44051
These three commits are tightly coupled, but should be reviewed one-by-one. The first adds tests for healthchecks, and found a bug. The second basically rewrites the healthcheck pkg to be much simpler and less flexible (since we weren't using the flexibility). The third tweaks how healthchecks are handled in endpoints-path to be more like they are in services-path.
@MrHohn because I know you were in here for source-IP GA work.
@wojtek-t
The "Setting endpoints" message from kube-proxy at high verbosity was
lost as part of a larger simplification in kubernetes/kubernetes#42747.
This change brings it back, simply outputting the just-constructed
addresses list.
Automatic merge from submit-queue
kube-proxy: filter INPUT as well as OUTPUT
We need to apply filter rules on the way in (nodeports) and out (cluster
IPs). Testing here is insufficient to have caught this - will come back
for that.
Fixes#43969
@justinsb since you have the best repro, can you test? It passes what I think is repro.
@ethernetdan we will want this in 1.6.x
```release-note
Fix bug with service nodeports that have no backends not being rejected, when they should be. This is not a regression vs v1.5 - it's a fix that didn't quite fix hard enough.
```
The existing healthcheck lib was pretty complicated and was hiding some
bugs (like the count always being 1), This is a reboot of the interface
and implementation to be significantly simpler and better tested.
Automatic merge from submit-queue
Use shared informers for proxy endpoints and service configs
Use shared informers instead of creating local controllers/reflectors
for the proxy's endpoints and service configs. This allows downstream
integrators to pass in preexisting shared informers to save on memory &
cpu usage.
This also enables the cache mutation detector for kube-proxy for those
presubmit jobs that already turn it on.
Follow-up to #43295 cc @wojtek-t
Will race with #43937 for conflicting changes 😄 cc @thockin
cc @smarterclayton @sttts @liggitt @deads2k @derekwaynecarr @eparis @kubernetes/rh-cluster-infra
Adding test cases for HC updates found a bug with an update that
simultaneously removes one port and adds another. Map iteration is
randomized, so sometimes no HC would be created.
Use shared informers instead of creating local controllers/reflectors
for the proxy's endpoints and service configs. This allows downstream
integrators to pass in preexisting shared informers to save on memory &
cpu usage.
This also enables the cache mutation detector for kube-proxy for those
presubmit jobs that already turn it on.
We need to apply filter rules on the way in (nodeports) and out (cluster
IPs). Testing here is insufficient to have caught this - will come back
for that.
We don't need the svcPortToInfoMap. Its only purpose was to
send "valid" local endpoints (those with valid IP and >0 port) to the
health checker. But we shouldn't be sending invalid endpoints to
the health checker anyway, because it can't do anything with them.
If we exclude invalid endpoints earlier, then we don't need
flattenValidEndpoints().
And if we don't need flattenValidEndpoints() it makes no sense to have
svcPortToInfoMap store hostPortInfo, since endpointsInfo is the same
thing as hostPortInfo except with a combined host:port.
And if svcPortToInfoMap now only stores valid endpointsInfos, it is
exactly the same thing as newEndpoints.
Automatic merge from submit-queue (batch tested with PRs 41672, 42084, 42233, 42165, 42273)
Don't sync IPtables before underlying store/reflector is fully synced
Ref #42108
Build on top of #42108 - only the second commit is unique.
Automatic merge from submit-queue
Extensible Userspace Proxy
This PR refactors the userspace proxy to allow for custom proxy socket implementations.
It changes the the ProxySocket interface to ensure that other packages can properly implement it (making sure all arguments are publicly exposed types, etc), and adds in a mechanism for an implementation to create an instance of the userspace proxy with a non-standard ProxySocket.
Custom ProxySockets are useful to inject additional logic into the actual proxying. For example, our idling proxier uses a custom proxy socket to hold connections and notify the cluster that idled scalable resources need to be woken up.
Also-Authored-By: Ben Bennett bbennett@redhat.com
Automatic merge from submit-queue (batch tested with PRs 42316, 41618, 42201, 42113, 42191)
Support unqualified and partially qualified domain name in DNS query in Windows kube-proxy
**What this PR does / why we need it**:
In Windows container networking, --dns-search is not currently supported on Windows Docker. Besides, even with --dns-suffix, inside Windows container DNS suffix is not appended to DNS query names. That makes unqualified domain name or partially qualified domain name in DNS query not able to resolve.
This PR provides a solution to resolve unqualified domain name or partially qualified domain name in DNS query for Windows container in Windows kube-proxy. It uses well-known Kubernetes DNS suffix as well host DNS suffix search list to append to the name in DNS query. DNS packet in kube-proxy UDP stream is modified as appropriate.
This PR affects the Windows kube-proxy only.
**Special notes for your reviewer**:
This PR is based on top of Anthony Howe's commit 48647fb, 0e37f0a and 7e2c71f which is already included in the PR 41487. Please only review commit b9dfb69.
**Release note**:
```release-note
Add DNS suffix search list support in Windows kube-proxy.
```
Automatic merge from submit-queue (batch tested with PRs 42200, 39535, 41708, 41487, 41335)
Update kube-proxy support for Windows
**What this PR does / why we need it**:
The kube-proxy is built upon the sophisticated iptables NAT rules. Windows does not have an equivalent capability. This introduces a change to the architecture of the user space mode of the Windows version of kube-proxy to match the capabilities of Windows.
The proxy is organized around service ports and portals. For each service a service port is created and then a portal, or iptables NAT rule, is opened for each service ip, external ip, node port, and ingress ip. This PR merges the service port and portal into a single concept of a "ServicePortPortal" where there is one connection opened for each of service IP, external ip, node port, and ingress IP.
This PR only affects the Windows kube-proxy. It is important for the Windows kube-proxy because it removes the limited portproxy rule and RRAS service and enables full tcp/udp capability to services.
**Special notes for your reviewer**:
**Release note**:
```
Add tcp/udp userspace proxy support for Windows.
```
This changes the userspace proxy so that it cleans up its conntrack
settings when a service is removed (as the iptables proxy already
does). This could theoretically cause problems when a UDP service
as deleted and recreated quickly (with the same IP address). As
long as packets from the same UDP source IP and port were going to
the same destination IP and port, the the conntrack would apply and
the packets would be sent to the old destination.
This is astronomically unlikely if you did not specify the IP address
to use in the service, and even then, only happens with an "established"
UDP connection. However, in cases where a service could be "switched"
between using the iptables proxy and the userspace proxy, this case
becomes much more frequent.
This commit makes the userspace proxy keep an ObjectReference to the
service being proxied. This allows the consumers of the `ServiceInfo`
struct, like `ProxySockets` to emit events about or otherwise refer to
the service.
This commit adds a new method for constructing userspace proxiers,
`NewCustomProxier`. `NewCustomProxier` functions identically to
`NewProxier`, except that it allows a custom constructor method to
be passed in to construct instances of ProxySocket.
This commit makes it possible for the `ProxySocket` interface to be
implemented by types outside of the `userspace` package. It mainly just
exposes relevant types and fields as public.
This commit adds a method to the `LoadBalancer` interface in the
userspace proxy which allows consumers of the `LoadBalancer` to check if
it thinks a given service has endpoints available.
This makes it more obvious that they run together and makes the upcoming
rate-limited syncs easier.
Also make test use ints for ports, so it's easier to see when a port is
a literal value vs a name.
This is a weird function, but I didn't want to change any semantics
until the tests are in place. Testing exposed one bug where stale
connections of renamed ports were not marked stale.
There are other things that seem wrong here, more will follow.
Move the feature test to where we are activating the feature, rather
than where we detect locality. This is in service of better tests,
which is in service of less-frequent resyncing, which is going to
require refactoring.
Instead of copying the map, like OnServicesUpdate() used to do and which
was copied into buildServiceMap() to preserve semantics while creating
testcases, start with a new empty map and do deletion checking later.
The API docs say:
// ServiceTypeExternalName means a service consists of only a reference to
// an external name that kubedns or equivalent will return as a CNAME
// record, with no exposing or proxying of any pods involved.
which implies that ExternalName services should be ignored for proxy
purposes.
Automatic merge from submit-queue (batch tested with PRs 35884, 37305, 37369, 37429, 35679)
fix mixleading warning message regarding kube-proxy nodeIP initializa…
The current warning message implies that the operator should restart kube-proxy with some flag related to node IP which can be very misleading.
Automatic merge from submit-queue
Cover port_allocator_test with more conditions
The test cases of port_allocator_test should cover more conditions, such as `rangeAllocator.used.Bit`.
Automatic merge from submit-queue
Bug fix. Incoming UDP packets not reach newly deployed services
**What this PR does / why we need it**:
Incoming UDP packets not reach newly deployed services when old connection's state in conntrack is not cleared. When a packet arrives, it will not go through NAT table again, because it is not "the first" packet. The PR fix the issue
**Which issue this PR fixes**
Fixes#31983
xref https://github.com/docker/docker/issues/8795
Automatic merge from submit-queue
Curating Owners: pkg/proxy
cc @thockin
In an effort to expand the existing pool of reviewers and establish a
two-tiered review process (first someone lgtms and then someone
experienced in the project approves), we are adding new reviewers to
existing owners files.
If You Care About the Process:
------------------------------
We did this by algorithmically figuring out who’s contributed code to
the project and in what directories. Unfortunately, that doesn’t work
well: people that have made mechanical code changes (e.g change the
copyright header across all directories) end up as reviewers in lots of
places.
Instead of using pure commit data, we generated an excessively large
list of reviewers and pruned based on all time commit data, recent
commit data and review data (number of PRs commented on).
At this point we have a decent list of reviewers, but it needs one last
pass for fine tuning.
Also, see https://github.com/kubernetes/contrib/issues/1389.
TLDR:
-----
As an owner of a sig/directory and a leader of the project, here’s what
we need from you:
1. Use PR https://github.com/kubernetes/kubernetes/pull/35715 as an example.
2. The pull-request is made editable, please edit the `OWNERS` file to
remove the names of people that shouldn't be reviewing code in the
future in the **reviewers** section. You probably do NOT need to modify
the **approvers** section. Names asre sorted by relevance, using some
secret statistics.
3. Notify me if you want some OWNERS file to be removed. Being an
approver or reviewer of a parent directory makes you a reviewer/approver
of the subdirectories too, so not all OWNERS files may be necessary.
4. Please use ALIAS if you want to use the same list of people over and
over again (don't hesitate to ask me for help, or use the pull-request
above as an example)
Automatic merge from submit-queue
Change stickyMaxAge from seconds to minutes, fixes issue #35677
**What this PR does / why we need it**: Increases the service sessionAfinity time from 180 seconds to 180 minutes for proxy mode iptables which was a bug introduced in a refactor.
**Which issue this PR fixes**: fixes#35677
**Special notes for your reviewer**:
**Release note**:
``` release-note
Fixed wrong service sessionAffinity stickiness time from 180 sec to 180 minutes in proxy mode iptables.
```
Since there is no test for the sessionAffinity feature at the moment I wanted to create one but I don't know how.
Automatic merge from submit-queue
Add Windows support to kube-proxy
<!-- Thanks for sending a pull request! Here are some tips for you:
1. If this is your first time, read our contributor guidelines https://github.com/kubernetes/kubernetes/blob/master/CONTRIBUTING.md and developer guide https://github.com/kubernetes/kubernetes/blob/master/docs/devel/development.md
2. If you want *faster* PR reviews, read how: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/faster_reviews.md
3. Follow the instructions for writing a release note: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/pull-requests.md#release-notes
-->
**What this PR does / why we need it**:
This is the first stab at supporting kube-proxy (userspace mode) on Windows
**Which issue this PR fixes** :
fixes#30278
**Special notes for your reviewer**:
The MVP uses `netsh portproxy` to redirect traffic from `ServiceIP:ServicePort` to a `LocalIP:LocalPort`.
For the next version we are expecting to have guidance from Microsoft Container Networking team.
**Limitations**:
Current implementation does not support DNS queries over UDP as `netsh portproxy` currently only supports TCP. We are working with Microsoft to remediate this.
cc: @brendandburns @dcbw
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```release-note
```
Zihong Zheng