* Remove deprecated nodeSelector label beta.kubernetes.io/os
Problem:
The nodeSelector label beta.kubernetes.io/os in the CoreDNS deployment was deprecated in 1.14 and will likely be removed soon
Solution:
Change the nodeSelector to remove the beta
Signed-off-by: Dan Mills <evilhamsterman@gmail.com>
We need to send the full chain in order for cross-signing to work
properly during switchover to a new root.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* Wait for kubelet port to be ready before setting
* Wait for kubelet to update the Ready status before reading port
Signed-off-by: Daishan Peng <daishan@acorn.io>
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Co-authored-by: Brad Davidson <brad.davidson@rancher.com>
Turns out etcd-only nodes were never running **any** of the controllers,
so allowing multiple controllers didn't really fix things.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Prevents errors when starting with fail-closed webhooks
Also, use panic instead of Fatalf so that the CloudControllerManager rescue can handle the error
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Allow bootstrapping with kubeadm bootstrap token strings or existing
Kubelet certs. This allows agents to join the cluster using kubeadm
bootstrap tokens, as created with the `k3s token create` command.
When the token expires or is deleted, agents can successfully restart by
authenticating with their kubelet certificate via node authentication.
If the token is gone and the node is deleted from the cluster, node auth
will fail and they will be prevented from rejoining the cluster until
provided with a valid token.
Servers still must be bootstrapped with the static cluster token, as
they will need to know it to decrypt the bootstrap data.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
This command must be run on a server while the service is running. After this command completes, all the servers in the cluster should be restarted to load the new CA files.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* General cleanup of test-helpers functions to address CI failures
* Install awscli in test image
* Log containerd output to file even when running with --debug
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Also ensure that the snapshot job does not attempt to trigger multiple concurrent runs, as this is not supported.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
ServiceLB now requires this module, but it will not get autoloaded by the kubelet if the host is using nftables.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Add enivironment variables for port-driver, cidr, mtu, and disable-host-loopback settings. Since rootless is still experimental, I don't think they deserve full CLI flag status.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* Add EncryptSecrets to Critical Control Args
* use deep comparison to extract differences
Signed-off-by: Derek Nola <derek.nola@suse.com>
Signed-off-by: Derek Nola <derek.nola@suse.com>
Problem:
Using defer inside a loop can lead to resource leaks
Solution:
Judge newer file in the separate function
Signed-off-by: iyear <ljyngup@gmail.com>
Using the node external IP address for all CNI traffic is a breaking change from previous versions; we should make it an opt-in for distributed clusters instead of default behavior.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
The InstancesV1 interface handled this for us by combining the ProviderName and InstanceID values; the new interface requires us to do it manually
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
For 1.24 and earlier, the svclb pods need a ServiceAccount so that we can allow their sysctls in PSPs
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
We should be reading from the hijacked bufio.ReaderWriter instead of
directly from the net.Conn. There is a race condition where the
underlying http handler may consume bytes from the hijacked request
stream, if it comes in the same packet as the CONNECT header. These
bytes are left in the buffered reader, which we were not using. This was
causing us to occasionally drop a few bytes from the start of the
tunneled connection's client data stream.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
If CCM and ServiceLB are both disabled, don't run the cloud-controller-manager at all;
this should provide the same CLI flag behavior as previous releases, and not create
problems when users disable the CCM but still want ServiceLB.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* Consolidate data dir flag
* Group cluster flags together
* Reorder and group agent flags
* Add additional info around vmodule flag
* Hide deprecated flags, and add warning about their removal
Signed-off-by: Derek Nola <derek.nola@suse.com>
Having separate tokens for server and agent nodes is a nice feature.
However, passing server's plain `K3S_AGENT_TOKEN` value
to `k3s agent --token` without CA hash is insecure when CA is
self-signed, and k3s warns about it in the logs:
```
Cluster CA certificate is not trusted by the host CA bundle, but the token does not include a CA hash.
Use the full token from the server's node-token file to enable Cluster CA validation.
```
Okay so I need CA hash but where should I get it?
This commit attempts to fix this issue by saving agent token value to
`agent-token` file with CA hash appended.
Signed-off-by: Vladimir Kochnev <hashtable@yandex.ru>
Requires tweaking existing method signature to allow specifying whether or not IPv6 addresses should be return URL-safe.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* Use INVOCATION_ID to detect execution under systemd, since as of a9b5a1933f NOTIFY_SOCKET is now cleared by the server code.
* Set the unit type to notify by default for both server and agent, which is what Rancher-managed installs have done for a while.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Addressess issue where the compact may take more than 10 seconds on slower disks. These disks probably aren't really suitable for etcd, but apparently run fine otherwise.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* Increase the default snapshot timeout. The timeout is not currently
configurable from Rancher, and larger clusters are frequently seeing
uploads fail at 30 seconds.
* Enable compression for scheduled snapshots if enabled on the
command-line. The CLI flag was not being passed into the etcd config.
* Only set the S3 content-type to application/zip if the file is zipped.
* Don't run more than one snapshot at once, to prevent misconfigured
etcd snapshot cron schedules from stacking up.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
87e1806697 removed the OwnerReferences
field from the DaemonSet, which makes sense since the Service may now be
in a different namespace than the DaemonSet and cross-namespace owner
references are not supported. Unfortunately, we were relying on
garbage collection to delete the DameonSet, so this started leaving
orphaned DaemonSets when Services were deleted.
We don't want to add an a Service OnRemove handler, since this will add
finalizers to all Services, not just LoadBalancers services, causing
conformance tests to fail. Instead, manage our own finalizers, and
restore the DaemonSet removal Event that was removed by the same commit.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Since #4438 removed 2-way sync and treats any changed+newer files on disk as an error, we no longer need to determine if files are newer on disk/db or if there is a conflicting mix of both. Any changed+newer file is an error, unless we're doing a cluster reset in which case everything is unconditionally replaced.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Properly skip restoring bootstrap data for files that don't have a path
set because the feature that would set it isn't enabled.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
cadvisor still doesn't pull stats via CRI yet, so we have to continue to use the deprecated arg.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Use same kubelet-preferred-address-types setting as RKE2 to improve reliability of the egress selector when using a HTTP proxy. Also, use BindAddressOrLoopback to ensure that the correct supervisor address is used when --bind-address is set.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
If the user points S3 backups at a bucket containing other files, those
file names may not be valid configmap keys.
For example, RKE1 generates backup files with names like
`s3-c-zrjnb-rs-6hxpk_2022-05-05T12:05:15Z.zip`; the semicolons in the
timestamp portion of the name are not allowed for use in configmap keys.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* Move startup hooks wg into a runtime pointer, check before notifying systemd
* Switch default systemd notification to server
* Add 1 sec delay to allow etcd to write to disk
Signed-off-by: Derek Nola <derek.nola@suse.com>
This parameter controls which namespace the klipper-lb pods will be create.
It defaults to kube-system so that k3s does not by default create a new
namespace. It can be changed if users wish to isolate the pods and apply
some policy to them.
Signed-off-by: Darren Shepherd <darren@acorn.io>
The baseline PodSecurity profile will reject klipper-lb pods from running.
Since klipper-lb pods are put in the same namespace as the Service this
means users can not use PodSecurity baseline profile in combination with
the k3s servicelb.
The solution is to move all klipper-lb pods to a klipper-lb-system where
the security policy of the klipper-lb pods can be different an uniformly
managed.
Signed-off-by: Darren Shepherd <darren@acorn.io>
The control-plane context handles requests outside the cluster and
should not be sent to the proxy.
In agent mode, we don't watch pods and just direct-dial any request for
a non-node address, which is the original behavior.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Watching pods appears to be the most reliable way to ensure that the
proxy routes and authorizes connections.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Allow the flannel backend to be specified as
backend=option=val,option2=val2 to select a given backend with extra options.
In particular this adds the following options to wireguard-native
backend:
* Mode - flannel wireguard tunnel mode
* PersistentKeepaliveInterval- wireguard persistent keepalive interval
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
This reverts commit aa9065749c.
Setting dual-stack node-ip does not work when --cloud-provider is set
to anything, including 'external'. Just set node-ip to the first IP, and
let the cloud provider add the other address.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
The cloud-provider arg is deprecated and cannot be set to anything other than external, but must still be used or node addresses are not set properly.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Roberto Bonafiglia