This commit introduces the following updates and fixes:
- Enable scaleIO volume multip-mapping based on accessMode
- No longer uses "default" as default values for storagepool & protection domain
- validates capacity when capacity is zero
- Better naming for PV and volume
- make mount ro when accessModes contains ROM
After a volume is unmounted from pod and worker node,
cluster admin or external-provisioner might delete
the disk from storage, therefore block device on
the node should be cleaned up beforehand.
The photon volume plugin already has same functionality.
Fixes#49392
Automatic merge from submit-queue
Volunteer to review Cinder related code
**What this PR does / why we need it**:
Since i am currently helping with the OpenStack cloud provider, happy
to do the same with cinder package as well as they are related.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 49712, 49694, 49714, 49670, 49717)
FC volume plugin: remove unmount of global mount
**What this PR does / why we need it**:
The unmount operation for global mount should be done by reconciler.go instead of executing inside the FC Plugin since attacher/detacher for FC plugin was merged recently.
**Which issue this PR fixes** : fixes#49669
**Special notes for your reviewer**:
**Release note**:
```
NONE
```
Automatic merge from submit-queue (batch tested with PRs 49619, 49598, 47267, 49597, 49638)
Adding metrics support to local volume
Adding metrics support to local volume plugin.
Fixes#49601
Automatic merge from submit-queue (batch tested with PRs 49081, 49318, 49219, 48989, 48486)
Use MetricsStatsFs to expose RBD volume plugin metrics.
**What this PR does / why we need it**:
We need to monitor RBD volume usage of our cluster and configure alerts if RBD volume is nearly full. Users of cluster also need to see usage history graph on Grafana.
This PR use MetricsStatsFs to implement MetricsProvider interface of RBD plugin (same as `gce_pd`), so kubelet /stat/summary can expose RBD volume stats.
**Special notes for your reviewer**:
cc @rootfs
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
Tune Cinder approvers
I don't want to be single approver for cinder PRs, @anguslees is OpenStack maintainer and should be able to help with Cinder.
Any other volunteers from @kubernetes/sig-storage-pr-reviews or @k8s-sig-openstack-pr-reviews?
Note: @justinsb **is** still reviewer, he was just listed twice.
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 47357, 49514, 49271, 49572, 49476)
set default adminid for rbd deleter if unset
**What this PR does / why we need it**:
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#49225
**Special notes for your reviewer**:
/cc @BastiPaeltz @sjenning
**Release note**:
```release-note
set default adminid for rbd deleter if unset
```
flexVolumeMounter.SetUpAt creates a directory, where a volume has to be
mounted, and we have to remove this directory in error cases. Otherwise
we will see errors like this:
Orphaned pod 673b66d9-70f7-11e7-a5fa-525400307392 found, but volume paths are still present on disk
https://github.com/kubernetes/kubernetes/issues/49383
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Automatic merge from submit-queue (batch tested with PRs 49479, 49496)
tune iscsi and fc volume owner
**What this PR does / why we need it**:
add @mtanino to iscsi and fc volume reviewer
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
@kubernetes/sig-storage-misc
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 48911, 49475, 49438, 49362, 49274)
set RBD default values as constant vars
**What this PR does / why we need it**:
When working on #49225, I found some [default RBD parameters](https://kubernetes.io/docs/concepts/storage/persistent-volumes/#ceph-rbd) had not been declared as constant values, which will be error-prone.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
set RBD default values as constant vars
```
Automatic merge from submit-queue (batch tested with PRs 48911, 49475, 49438, 49362, 49274)
Fixed glusterfs mount options
Capacity of a slice is the third argument, not the second one.
We use append() to fill the slice, so it should be empty at the beginning
and with the right capacity.
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 49444, 47864, 48584, 49395, 49118)
Allow unmounting bind-mounted directories.
**What this PR does / why we need it**:
For files, we cannot use `path/..`;
we could use `filepath.Dir` but for bind-mounted, `isNotMounted` which calls `IsLikelyNotMountPoint` would not work anyway.
Let's just have the driver do the work.
Addressing
```
Error: UnmountVolume.TearDown failed for volume "..." (volume.spec.Name: "...") pod "..." (UID: "...") with: lstat /path/.../test-flex/..: not a directory
```
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
N/A
**Special notes for your reviewer**:
N/A
**Release note**:
```release-note
It is now posible to use flexVolumes to bind mount directories and files.
```
Automatic merge from submit-queue (batch tested with PRs 45345, 49470, 49407, 49448, 49486)
Support "fstype" parameter in dynamically provisioned PVs
This PR is a replacement for https://github.com/kubernetes/kubernetes/pull/40805. I was not able to push fixes and rebases to the original branch as I don't have access to the Github organization anymore.
I assume the PR will need a new "ok to test"
**ORIGINAL PR DESCRIPTION**
**What this PR does / why we need it**: This PR allows specifying the desired FSType when dynamically provisioning volumes with storage classes. The FSType can now be set as a parameter:
```yaml
kind: StorageClass
apiVersion: storage.k8s.io/v1beta1
metadata:
name: test
provisioner: kubernetes.io/azure-disk
parameters:
fstype: xfs
```
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#37801
**Special notes for your reviewer**:
The PR also implicitly adds checks for unsupported parameters.
**Release note**:
```release-note
Support specifying of FSType in StorageClass
```
For bind-mounted directories, the isNotMounted which calls
IsLikelyNotMountPoint fails because the filesystem of the mounted
location and the parent directory are the same.
Addressing:
unmounter.go:59] Warning: Path: /path/.../test-dir already unmounted
Capacity of a slice is the third argument, not the second one.
We use append() to fill the slice, so it should be empty at the beginning
and with the right capacity.
The syscall package is locked down and the comment in [1] advises to
switch code to use the corresponding package from golang.org/x/sys. Do
so and replace usage of package syscall with package
golang.org/x/sys/unix where applicable.
[1] https://github.com/golang/go/blob/master/src/syscall/syscall.go#L21-L24
This will also allow to get updates and fixes for syscall wrappers
without having to use a new go version.
Errno, Signal and SysProcAttr aren't changed as they haven't been
implemented in /x/sys/. Stat_t from syscall is used if standard library
packages (e.g. os) require it. syscall.SIGTERM is used for
cross-platform files.
Automatic merge from submit-queue (batch tested with PRs 49328, 49285, 49307, 49127, 49163)
Make definite mount timeout for glusterfs volume mount.
The `backup-volfile-servers` mount option allows to specify more than
one server to be contacted in single mount command. With this option in place,
it is not required to iterate over all the servers in the addrlist.
A mount attempt with this option will fetch all the servers mentioned in
the list, Reference # https://access.redhat.com/documentation/en-US/Red_Hat_Storage/3/html/Administration_Guide/sect-Native_Client.html
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
Automatic merge from submit-queue (batch tested with PRs 49212, 49203, 49255)
If the init fails for whatever reason, plugin is nil and cannot be used.
**What this PR does / why we need it**:
Addressing
```
=== RUN TestCanSupport
E0719 13:48:19.829849 2289 driver-call.go:232] init command failed, status: Successx, reason:
--- FAIL: TestCanSupport (0.00s)
flexvolume_test.go:180: Can't find the plugin by name
panic: runtime error: invalid memory address or nil pointer dereference [recovered]
panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x1 addr=0x30 pc=0x11fc5b5]
```
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
N/A
**Special notes for your reviewer**:
N/A
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 49218, 48253, 48967, 48460, 49230)
Fix the Azure file to work within different cloud environments
**What this PR does / why we need it**:
Fix the Azure file plugin to work within different cloud environments.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#46081
cc @rootfs @brendandburns
Automatic merge from submit-queue (batch tested with PRs 48377, 48940, 49144, 49062, 49148)
support fc volume attach and detach
**What this PR does / why we need it**:
Support FC volume attach and detach to enforce RWO access
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#48953
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
Improve the warning message if the rbd command is not found.
**What this PR does / why we need it**:
The previous warning msg is not correct if there is no rbd cmd.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
```
Automatic merge from submit-queue (batch tested with PRs 48481, 48256)
Refactor: pkg/util into sub-pkgs
**What this PR does / why we need it**:
- move code in pkg/util into sub-pkgs
- delete some unused funcs
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#15634
**Special notes for your reviewer**:
This is the final work of #15634. It will close that issue.
/cc @thockin
**Release note**:
```release-note
NONE
```
`volumeoptions` which can be used to set various volume options.
for eg# if you want to enable encryption on volumes,
the values like `client.ssl on`, `server.ssl on`..etc can be passed
to `volumeoptions` parameter in storageclass.
Issue # https://github.com/kubernetes/kubernetes/issues/28454
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
Automatic merge from submit-queue (batch tested with PRs 48997, 48595, 48898, 48711, 48972)
Use local PX endpoint for mount, unmount, detach and attach calls
**What this PR does / why we need it**:
This PR fixes an issue with Setup and TearDown of Portworx volumes which has side-effects such a Pod using a Portworx volume not being able to start on the minion.
**Which issue this PR fixes**: fixes#49034
This PR addresses an issue that fails to mount, attach, unmount or detach a volume when Kubernetes sends these requests to Portworx when it's API server on that particular minion is down.
Portworx mount, unmount, attach and detach requests need to be received on the minion where the pod is running. So these calls need to talk to the Portworx API server running locally on that node (and NOT to the Portworx k8s service since it may route the request to any node in the cluster). This PR explicitly makes such requests local only.
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 47417, 47638, 46930)
print non-existent key in configmap
**What this PR does / why we need it**:
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#41573
**Special notes for your reviewer**:
carry from #41574
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 46973, 48556)
Improve error reporting when flex driver has failed to initialize
**What this PR does / why we need it**:
This PR improves error reporting for the case when flex driver is failing to initialize. There are 2 improvements:
1) show only the plugin name instead of a full struct. This makes a message shorter and removes useless and internal information.
Before:
>E0605 16:44:59.330215 26786 plugins.go:359] Failed to load volume plugin &{k8s/nfs /usr/libexec/kubernetes/kubelet-plugins/volume/exec/k8s~nfs %!s(*kubelet.kubeletVolumeHost=&{0xc431ea5800 {{1 0} map[kubernetes.io/downward-api:0xc431ee3f20 kubernetes.io/aws-ebs:0xc431ee3eb0 kubernetes.io/git-repo:0xc431ee3ef0 kubernetes.io/host-path:0xc430e985f0 kubernetes.io/rbd:0xc42bfab840 kubernetes.io/quobyte:0xc431ee3f00 kubernetes.io/fc:0xc42bfab980 kubernetes.io/empty-dir:0xc431ee3ed0 kubernetes.io/nfs:0xc430e98640 kubernetes.io/iscsi:0xc42bfab720 kubernetes.io/glusterfs:0xc430faaba0 kubernetes.io/cinder:0xc42bfab8c0 kubernetes.io/gce-pd:0xc431ee3ee0 kubernetes.io/secret:0xc42bfab6a0 kubernetes.io/flocker:0xc431ee3f30 kubernetes.io/cephfs:0xc431ee3f10]} 0xc42698cf40}) %!s(*exec.executor=&{}) {%!s(int32=0) %!s(uint32=0)} []}, error: unexpected end of JSON input
After:
>E0605 16:59:45.520185 29041 plugins.go:359] Failed to load volume plugin k8s/nfs, error: unexpected end of JSON input
2) quote script output. In case the output was empty, messages look a bit better:
Before:
> E0605 16:44:59.330077 26786 driver-call.go:212] Failed to unmarshal output for command: init, **output: **, error: unexpected end of JSON input
> W0605 16:44:59.330170 26786 driver-call.go:140] FlexVolume: driver call failed: executable: /usr/libexec/kubernetes/kubelet-plugins/volume/exec/k8s\~nfs/nfs, args: [init], error: fork/exec /usr/libexec/kubernetes/kubelet-plugins/volume/exec/k8s\~nfs/nfs: permission denied, **output: **
After:
>E0605 16:59:45.519906 29041 driver-call.go:212] Failed to unmarshal output for command: init, **output: ""**, error: unexpected end of JSON input
>W0605 16:59:45.520109 29041 driver-call.go:140] FlexVolume: driver call failed: executable: /usr/libexec/kubernetes/kubelet-plugins/volume/exec/k8s\~nfs/nfs, args: [init], error: fork/exec /usr/libexec/kubernetes/kubelet-plugins/volume/exec/k8s\~nfs/nfs: permission denied, **output: ""**
Automatic merge from submit-queue
Fix comments and typo in the error message
**What this PR does / why we need it**:
This PR fixes outdated comments and typo in the error message.
**Release note**:
```release-note
NONE
```
CC @simo5
Automatic merge from submit-queue
Fix share name generation in azure file provisioner.
**What this PR does / why we need it**:
Azure file share name has a length limit of 63, but currently the code is using data volume's limit 75.
**Which issue this PR fixes**
With current implementation, when the cluster name is long, the resulting file share name could have a length of 75.
Also function `GenerateVolumeName` would produce double '-' when clusterName containing '-' is to be truncated.
In both cases, service would reject the creating file share request.
**Special notes for your reviewer**:
Please refer to:
https://docs.microsoft.com/en-us/rest/api/storageservices/naming-and-referencing-shares--directories--files--and-metadata#share-names
- Share names must be from 3 through 63 characters long.
- The name cannot contain two consecutive hyphens.
@rootfs @colemickens
**Release note**:
Automatic merge from submit-queue
remove some people from OWNERS so they don't get reviews anymore
These are googlers who don't work on the project anymore but are still
getting reviews assigned to them:
- @bprashanth
- @rjnagal
- @vmarmol
Automatic merge from submit-queue (batch tested with PRs 48425, 41680, 48457, 48619, 48635)
"rbd: image xxx is locked by other nodes" is misleading
**What this PR does / why we need it**:
For RWO PV, RBD plugin tries to fence it first, but there are many situations which may cause lock to fail, e.g.
- userSecret is incorrect
- monitor addresses are incorrect or node cannot access ceph cluster temporarily
- image is locked by other nodes
- maybe more...
So, original "image xxx is locked by other nodes" is incorrect in some cases and misleading in diagnosis.
This PR change the error to be correct and not misleading first. We may add detail error descriptions later.
**Special notes for your reviewer**:
New FailedMount event example if RBD plugin cannot lock image:
```
... FailedMount MountVolume.SetUp failed for volume "pvc-ee37a9c8-608e-11e7-b3a7-000c291fbe71" : rbd: failed to lock image kubernetes-dynamic-pvc-ee3b9911-608e-11e7-97b6-000c291fbe71 (maybe locked by other nodes), error exit status 22
```
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 48672, 47140, 48709, 48786, 48757)
glusterfs: retry without auto_unmount only when it's not supported
GlusterFS volume plugin should not blindly retry all failed mounts without
auto_unmount, it should retry them only when we are sure that auto_unmount
was the reason the first attempt failed.
@kubernetes/sig-storage-pr-reviews
/assign @humblec
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 48672, 47140, 48709, 48786, 48757)
use built-in path separator instead of hard coded
**What this PR does / why we need it**:
We should use built-in path separator to avoid hard coded strings.
**Which issue this PR fixes** :
**Special notes for your reviewer**:
**Release note**:
```release-note
None
```
Automatic merge from submit-queue
Local storage teardown fix
**What this PR does / why we need it**: Local storage uses bindmounts and the method IsLikelyNotMountPoint does not detect these as mountpoints. Therefore, local PVs are not properly unmounted when they are deleted.
**Which issue this PR fixes**: fixes#48331
**Special notes for your reviewer**:
You can use these e2e tests to reproduce the issue and validate the fix works appropriately https://github.com/kubernetes/kubernetes/pull/47999
The existing method IsLikelyNotMountPoint purposely does not check mountpoints reliability (4c5b22d4c6/pkg/util/mount/mount_linux.go (L161)), since the number of mountpoints can be large. 4c5b22d4c6/pkg/util/mount/mount.go (L46)
This implementation changes the behavior for local storage to detect mountpoints reliably, and avoids changing the behavior for any other callers to a UnmountPath.
**Release note**:
```
Fixes bind-mount teardown failure with non-mount point Local volumes (issue https://github.com/kubernetes/kubernetes/issues/48331).
```
Added IsNotMountPoint method to mount utils (pkg/util/mount/mount.go)
Added UnmountMountPoint method to volume utils (pkg/volume/util/util.go)
Call UnmountMountPoint method from local storage (pkg/volume/local/local.go)
IsLikelyNotMountPoint behavior was not modified, so the logic/behavior for UnmountPath is not modified
GlusterFS volume plugin should not blindly retry all failed mounts without
auto_unmount, it should retry them only when we are sure that auto_unmount
was the reason the first attempt failed.
Automatic merge from submit-queue (batch tested with PRs 48264, 48324, 48125, 47944, 47489)
Set quota for volumes
**What this PR does / why we need it**:
This PR allows users of the Quobyte Storage class to specify if automatically a Quota for the volume should be created. With a Quota a Quobyte volume can only grow in the specified size.
**Special notes for your reviewer**:
Update the Quobyte API version for the needed functionality.
Automatic merge from submit-queue (batch tested with PRs 47619, 47951, 46260, 48277)
iSCSi plugin: Remove redundant nil check
**What this PR does / why we need it**:
This patch is for cleanup of redundant nil check in iSCSI plugin.
This was mentioned at the code review on origin github thread.
https://github.com/openshift/origin/pull/14565
**Which issue this PR fixes**
**Special notes for your reviewer**:
**Release note**:
```
NONE
```
Automatic merge from submit-queue (batch tested with PRs 48074, 47971, 48044, 47514, 47647)
Use more meaningful and consistent variable names in glusterfs plugin.
Automatic merge from submit-queue
storageclass ceph add imageformat parameter
**What this PR does / why we need it**:
Add a imageformat parameter for StorageClass(ceph rbd)
k8s hard coded ceph imageformat 1, according to [ceph manual](http://docs.ceph.com/docs/master/man/8/rbd/), imageformat 1 was deprecated, we should add an extra ceph parameter to set ceph rbd imageformat. Ceph rbd imageformat can only be 1 or 2, set the default value to 1.
**Release note**:
```release-note
Allow StorageClass Ceph RBD to specify image format and image features.
```
Automatic merge from submit-queue (batch tested with PRs 47878, 47503, 47857)
Remove controller node plugin driver dependency for non-attachable fl…
…ex volume drivers (Ex: NFS).
**What this PR does / why we need it**:
Removes requirement to install flex volume drivers on master node for non-attachable drivers likes NFS.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#47109
```release-note
Fixes issue w/Flex volume, introduced in 1.6.0, where drivers without an attacher would fail (node indefinitely waiting for attach). Drivers that don't implement attach should return `attach: false` on `init`.
```
Automatic merge from submit-queue (batch tested with PRs 47851, 47824, 47858, 46099)
Revert 44714 manually
#44714 broke backward compatibility for old swagger spec that kubectl still uses. The decision on #47448 was to revert this change but the change was not automatically revertible. Here I semi-manually remove all references to UnixUserID and UnixGroupID and updated generated files accordingly.
Please wait for tests to pass then review that as there may still be tests that are failing.
Fixes#47448
Adding release note just because the original PR has a release note. If possible, we should remove both release notes as they cancel each other.
**Release note**: (removed by caesarxuchao)
UnixUserID and UnixGroupID is reverted back as int64 to keep backward compatibility.
Automatic merge from submit-queue (batch tested with PRs 34515, 47236, 46694, 47819, 47792)
not allow backsteps in local volume plugin
**Which issue this PR fixes** : fixes#47207
**Special notes for your reviewer**:
cc @msau42 @ddysher
Just follow @liggitt [commented](https://github.com/kubernetes/kubernetes/issues/47107#issuecomment-306831175).
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 34515, 47236, 46694, 47819, 47792)
remove unused constant
**What this PR does / why we need it**:
In flexvolume constant definitions, fix typo StatusFailure string to "Failure", not "Failed" at
b359034817/pkg/volume/flexvolume/flexvolume_util.go (L45)
**Which issue this PR fixes** _(optional, in `fixes #<issue number>(, #<issue_number>, ...)` format, will close that issue when PR gets merged)_: fixes #
#34510
**Special notes for your reviewer**:
Simple string literal change, but hopefully will prevent future confusion for developers.
Automatic merge from submit-queue (batch tested with PRs 47626, 47674, 47683, 47290, 47688)
validate host paths on the kubelet for backsteps
**What this PR does / why we need it**:
This PR adds validation on the kubelet to ensure the host path does not contain backsteps that could allow the volume to escape the PSP's allowed host paths. Currently, there is validation done at in API server; however, that does not account for mismatch of OS's on the kubelet vs api server.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#47107
**Special notes for your reviewer**:
cc @liggitt
**Release note**:
```release-note
Paths containing backsteps (for example, "../bar") are no longer allowed in hostPath volume paths, or in volumeMount subpaths
```
Automatic merge from submit-queue (batch tested with PRs 38751, 44282, 46382, 47603, 47606)
Adding 'flexvolume' prefix to FlexVolume plugin names.
**What this PR does / why we need it**: Adds a prefix to FlexVolume plugin names in order to more easily identify plugins as FlexVolume. Improves debugging.
**Special notes for your reviewer**: Unfortunately the delimiter after 'flexvolume' is restricted to either '-' or '.' . This makes the prefix seem like it's part of the vendor name. Not sure if this could cause issues later on.
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 47204, 46808, 47432, 47400, 47099)
Remove broken getvolumename and pass PV or volume name to attach call
Cherry-picking https://github.com/kubernetes/kubernetes/pull/46249 to master
What this PR does / why we need it:
Flex getvolumename is broken in 1.6. It needs to be fixed comprehensively in 1.7 release. Removing the api in 1.6. Also pass PV or volume name to the driver during attach call. Detach uses PV or volume name, so plugin can use that information to map to PV.
Which issue this PR fixes (optional, in fixes #(, fixes #<issue_number>, ...) format, will close that issue when PR gets merged): fixes #
Fixes - #44737
Automatic merge from submit-queue (batch tested with PRs 47084, 46016, 46372)
Warn, instead of failing, if 'modprobe rbd' fails
Modprobe is a kernel operation that should only be done once to load the
RBD module. The admin could've done this on the Kubernetes nodes. The
RBD plugin can still try to load the module but it shouldnt fail the
workflow if it doesnt succeed.
Partially addresses #45190
Automatic merge from submit-queue (batch tested with PRs 46929, 47391, 47399, 47428, 47274)
Don't provision for PVCs with AccessModes unsupported by plugin
Fail early in case the user actually expects e.g. RWM from AWS when in reality that isn't possible.
@eparis @gnufied
edit: this needs release note because it's a breaking bugfix; will write one.
https://github.com/kubernetes/kubernetes/issues/46540
```release-note
Fix dynamic provisioning of PVs with inaccurate AccessModes by refusing to provision when PVCs ask for AccessModes that can't be satisfied by the PVs' underlying volume plugin
```
Automatic merge from submit-queue (batch tested with PRs 47075, 46342)
Remove hardcode for blocksize, use stat(), fixes test failure on SLES
**What this PR does / why we need it**:
Removes hardcoding for blocksize, fixes test failure on SLES
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#44022
**Special notes for your reviewer**:
**Release note**:
```release-note
```
If iscsiTransport is not tcp, iSCSI plugin tries to
find devicepath using filepath.Glob but never updates
devicepath with the filepath.Glob result.
This patch fixes the problem.
Fixes#47253
Automatic merge from submit-queue (batch tested with PRs 46977, 47005, 47018, 47061, 46809)
Waiting attach operation to be finished rather than returning nil
Fixes#46882
Automatic merge from submit-queue
Add SuccessfulMountVolume message to the events of pod
**What this PR does / why we need it:**
When creating a pod with volume, the volume mount may failed at first, but eventually succeed after retry several times. kubectl describe pod can only see the failed messages, so i think it will be better to add the SuccessfulMountVolume message to the pod events too.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
Fixes#42867
Automatic merge from submit-queue (batch tested with PRs 46239, 46627, 46346, 46388, 46524)
move labels to components which own the APIs
During the apimachinery split in 1.6, we accidentally moved several label APIs into apimachinery. They don't belong there, since the individual APIs are not general machinery concerns, but instead are the concern of particular components: most commonly the kubelet. This pull moves the labels into their owning components and out of API machinery.
@kubernetes/sig-api-machinery-misc @kubernetes/api-reviewers @kubernetes/api-approvers
@derekwaynecarr since most of these are related to the kubelet
Automatic merge from submit-queue
Log out from multiple target portals when using iscsi storage plugin
**What this PR does / why we need it**:
When using iscsi storage with multiple target portal (TP) addresses
and multipathing the volume manager logs on to the IQN for all
portal addresses, but when a pod gets destroyed the volume manager
only logs out for the primary TP and sessions for another TPs are
always remained.
This patch adds mount points for all TPs, and then log out from all
TPs when a pod is destroyed. If a TP is referred from another pods,
the connection will be remained as usual.
**Which issue this PR fixes**
fixes#45394
**Special notes for your reviewer**:
**Release note**:
```
NONE
```
Automatic merge from submit-queue
Migrate kubelet to ConfigMapManager interface and use TTL-based caching manager
Fixes#41379
Sometime ago we moved to a secret manager interface for kubelet to manage secrets.
This PR's first commit moves config map management also to a similar interface.
The second commit adds TTL-based CachingConfigMapManager (similar to CachingSecretManager) and makes kubelet use it.
/cc @kubernetes/sig-node-pr-reviews @kubernetes/sig-scalability-misc @wojtek-t @dchen1107
When using iscsi storage with multiple target portal (TP)
addresses and multipathing the volume manager logs on to
the IQN for all portal addresses, but when a pod gets
destroyed the volume manager only logs out for the primary
TP and sessions for another TPs are always remained.
This patch adds methods to store and load iscsi disk
configrations, then uses the stored config at DetachDisk
path.
Fix#45394
Automatic merge from submit-queue
Check volume's status before detaching volume
When volume's status is 'detaching', controllermanager will detach
it again and return err. It is necessary to check volume's status
before detaching volume.
same issue: #44536
Automatic merge from submit-queue (batch tested with PRs 46661, 46562, 46657, 46655, 46640)
remove redundant carriage return for readable
**What this PR does / why we need it**:
remove redundant carriage to make it more readable.
Automatic merge from submit-queue (batch tested with PRs 46076, 43879, 44897, 46556, 46654)
Local storage plugin
**What this PR does / why we need it**:
Volume plugin implementation for local persistent volumes. Scheduler predicate will direct already-bound PVCs to the node that the local PV is at. PVC binding still happens independently.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*:
Part of #43640
**Release note**:
```
Alpha feature: Local volume plugin allows local directories to be created and consumed as a Persistent Volume. These volumes have node affinity and pods will only be scheduled to the node that the volume is at.
```
When volume's status is 'detaching', controllermanager will detach
it again and return err. It is necessary to wait for detach
operation to complete within the alloted time.
Automatic merge from submit-queue (batch tested with PRs 46450, 46272, 46453, 46019, 46367)
Move MountVolume.SetUp succeeded to debug level
This message is verbose and repeated over and over again in log files
creating a lot of noise. Leave the message in, but require a -v in
order to actually log it.
**What this PR does / why we need it**: Moves a verbose log message to actually be verbose.
**Which issue this PR fixes** fixes#46364Fixes#29059
Automatic merge from submit-queue (batch tested with PRs 46383, 45645, 45923, 44884, 46294)
Node status updater now deletes the node entry in attach updates...
… when node is missing in NodeInformer cache.
- Added RemoveNodeFromAttachUpdates as part of node status updater operations.
**What this PR does / why we need it**: Fixes issue of unnecessary node status updates when node is deleted.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#42438
**Special notes for your reviewer**: Unit tested added, but a more comprehensive test involving the attach detach controller requires certain testing functionality that is currently absent, and will require larger effort. Will be added at a later time.
There is an edge case caused by the following steps:
1) A node is deleted and restarted. The node exists, but is not yet recognized by Kubernetes.
2) A pod requiring a volume attach with nodeName specifically set to this node.
This would make the pod stuck in ContainerCreating state. This is low-pri since it's a specific edge case that can be avoided.
**Release note**:
```release-note
NONE
```
This message is verbose and repeated over and over again in log files
creating a lot of noise. Leave the messsage in, but require a -v in
order to actually log it.
Fixes#29059
Automatic merge from submit-queue (batch tested with PRs 46429, 46308, 46395, 45867, 45492)
Implement FakeVolumePlugin's ConstructVolumeSpec method according to interface expectation.
This fixes#45803 and #46204.
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 45518, 46127, 46146, 45932, 45003)
Remove requirement to run the Portworx volume driver on master node
**What this PR does / why we need it**:
This change removes requirement to run the Portworx volume driver on Kubernetes master node.
**Special notes for your reviewer**:
Before this pull request, in order to use a Portworx volume, users had to run the Portworx container on the master node. Since it isn't ideal (and impossible on GKE) to schedule any pods on the master node, this PR removes that requirement.
Automatic merge from submit-queue
fix regression in UX experience for double attach volume
send event when volume is not allowed to multi-attach
Fixes#46012
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 38505, 41785, 46315)
Only retrieve relevant volumes
**What this PR does / why we need it**:
Improves performance for Cinder volume attach/detach calls.
Currently when Cinder volumes are attached or detached, functions try to retrieve details about the volume from the Nova API. Because some only have the volume name not its UUID, they use the list function in gophercloud to iterate over all volumes to find a match. This incurs severe performance problems on OpenStack projects with lots of volumes (sometimes thousands) since it needs to send a new request when the current page does not contain a match. A better way of doing this is use the `?name=XXX` query parameter to refine the results.
**Which issue this PR fixes**:
https://github.com/kubernetes/kubernetes/issues/26404
**Special notes for your reviewer**:
There were 2 ways of addressing this problem:
1. Use the `name` query parameter
2. Instead of using the list function, switch to using volume UUIDs and use the GET function instead. You'd need to change the signature of a few functions though, such as [`DeleteVolume`](https://github.com/kubernetes/kubernetes/blob/master/pkg/volume/cinder/cinder.go#L49), so I'm not sure how backwards compatible that is.
Since #1 does effectively the same as #2, I went with it because it ensures BC.
One assumption that is made is that the `volumeName` being retrieved matches exactly the name of the volume in Cinder. I'm not sure how accurate that is, but I see no reason why cloud providers would want to append/prefix things arbitrarily.
**Release note**:
```release-note
Improves performance of Cinder volume attach/detach operations
```
An admin wants to specify in which AWS availability zone(s) users may create persistent volumes using dynamic provisioning.
That's why the admin can now configure in StorageClass object a comma separated list of zones. Dynamically created PVs for PVCs that use the StorageClass are created in one of the configured zones.
An admin wants to specify in which GCE availability zone(s) users may create persistent volumes using dynamic provisioning.
That's why the admin can now configure in StorageClass object a comma separated list of zones. Dynamically created PVs for PVCs that use the StorageClass are created in one of the configured zones.
The zone parameter provided in a Storage Class may erroneously be an empty string or contain only spaces and tab characters. Such situation shall be detected and reported as an error.
That's why the func ValidateZone was added.
An admin shall be able to configure a comma separated list of zones for a StorageClass.
That's why the func ZonesToSet (string) (set.String, error) is added. The func ZonesToSet converts a string containing a comma separated list of zones to a set. In case the list contains an empty zone an error is returned.
Automatic merge from submit-queue
Add `auto_unmount` mount option for glusterfs fuse mount.
libfuse has an auto_unmount option which, if enabled, ensures that
the file system is unmounted at FUSE server termination by running a
separate monitor process that performs the unmount when that occurs.
(This feature would probably better be called "robust auto-unmount",
as FUSE servers usually do try to unmount their file systems upon
termination, it's just this mechanism is not crash resilient.)
This change implements that option and behavior for glusterfs.
This option will be only supported for clients with version >3.11.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
libfuse has an auto_unmount option which, if enabled, ensures that
the file system is unmounted at FUSE server termination by running a
separate monitor process that performs the unmount when that occurs.
(This feature would probably better be called "robust auto-unmount",
as FUSE servers usually do try to unmount their file systems upon
termination, it's just this mechanism is not crash resilient.)
This change implements that option and behavior for glusterfs.
This option will be only supported for clients with version >3.11.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
Modprobe is a kernel operation that should only be done once to load the
RBD module. The admin could've done this on the Kubernetes nodes. The
RBD plugin can still try to load the module but it shouldnt fail the
workflow if it doesnt succeed.
Partially addresses #45190
Automatic merge from submit-queue (batch tested with PRs 45374, 44537, 45739, 44474, 45888)
Fix attach volume to instance repeatedly
1.When volume's status is 'attaching', controllermanager will attach
it again and return err. So it is necessary to check volume's
status before attach/detach volume.
2. When volume's status is 'attaching', its attachments will be None,
controllermanager can't get device path and make some failed event.
But it is normal, so don't return err when attachments is None
Fix bug: #44536
Automatic merge from submit-queue (batch tested with PRs 45408, 45355, 45528)
Make createEndpointService() and deleteEndpointService() plugin interface methods.
Why this change?
In some setups, after creation of dynamic PVs and before mounting/using these PVs in a pod, the endpoint/service got mistakenly deleted by the user/developer. By making these methods 'plugin' specific, we can call it from mounter if there are scenarios where the endpoint and service got wiped in between accidentally.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
In some setups, after creation of dynamic PVs and before mounting/using
these PVs in a pod, the endpoint/service got mistakenly deleted by the
user/developer. By making these methods 'plugin' specific, we can call
it from mounter if there are scenarios where the endpoint and service
got wiped in between accidentally.
Signed-off-by: Humble Chirammal hchiramm@redhat.com
When volume's status is 'attaching', its attachments will be None,
controllermanager can't get device path and make some failed event.
But it is normal, let's fix it.
Automatic merge from submit-queue (batch tested with PRs 44798, 45537, 45448, 45432)
nfs.go: cleancode err
**What this PR does / why we need it**:
The modification makes code clean, simple, and easy to inspect.
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
Statefulsets for cinder: allow multi-AZ deployments, spread pods across zones
**What this PR does / why we need it**: Currently if we do not specify availability zone in cinder storageclass, the cinder is provisioned to zone called nova. However, like mentioned in issue, we have situation that we want spread statefulset across 3 different zones. Currently this is not possible with statefulsets and cinder storageclass. In this new solution, if we leave it empty the algorithm will choose the zone for the cinder drive similar style like in aws and gce storageclass solutions.
**Which issue this PR fixes** fixes#44735
**Special notes for your reviewer**:
example:
```
kind: StorageClass
apiVersion: storage.k8s.io/v1beta1
metadata:
name: all
provisioner: kubernetes.io/cinder
---
apiVersion: v1
kind: Service
metadata:
annotations:
service.alpha.kubernetes.io/tolerate-unready-endpoints: "true"
name: galera
labels:
app: mysql
spec:
ports:
- port: 3306
name: mysql
clusterIP: None
selector:
app: mysql
---
apiVersion: apps/v1beta1
kind: StatefulSet
metadata:
name: mysql
spec:
serviceName: "galera"
replicas: 3
template:
metadata:
labels:
app: mysql
annotations:
pod.alpha.kubernetes.io/initialized: "true"
spec:
containers:
- name: mysql
image: adfinissygroup/k8s-mariadb-galera-centos:v002
imagePullPolicy: Always
ports:
- containerPort: 3306
name: mysql
- containerPort: 4444
name: sst
- containerPort: 4567
name: replication
- containerPort: 4568
name: ist
volumeMounts:
- name: storage
mountPath: /data
readinessProbe:
exec:
command:
- /usr/share/container-scripts/mysql/readiness-probe.sh
initialDelaySeconds: 15
timeoutSeconds: 5
env:
- name: POD_NAMESPACE
valueFrom:
fieldRef:
apiVersion: v1
fieldPath: metadata.namespace
volumeClaimTemplates:
- metadata:
name: storage
annotations:
volume.beta.kubernetes.io/storage-class: all
spec:
accessModes: [ "ReadWriteOnce" ]
resources:
requests:
storage: 12Gi
```
If this example is deployed it will automatically create one replica per AZ. This helps us a lot making HA databases.
Current storageclass for cinder is not perfect in case of statefulsets. Lets assume that cinder storageclass is defined to be in zone called nova, but because labels are not added to pv - pods can be started in any zone. The problem is that at least in our openstack it is not possible to use cinder drive located in zone x from zone y. However, should we have possibility to choose between cross-zone cinder mounts or not? Imo it is not good way of doing things that they mount volume from another zone where the pod is located(means more network traffic between zones)? What you think? Current new solution does not allow that anymore (should we have possibility to allow it? it means removing the labels from pv).
There might be some things that needs to be fixed still in this release and I need help for that. Some parts of the code is not perfect.
Issues what i am thinking about (I need some help for these):
1) Can everybody see in openstack what AZ their servers are? Can there be like access policy that do not show that? If AZ is not found from server specs, I have no idea how the code behaves.
2) In GetAllZones() function, is it really needed to make new serviceclient using openstack.NewComputeV2 or could I somehow use existing one
3) This fetches all servers from some openstack tenant(project). However, in some cases kubernetes is maybe deployed only to specific zone. If kube servers are located for instance in zone 1, and then there are another servers in same tenant in zone 2. There might be usecase that cinder drive is provisioned to zone-2 but it cannot start pod, because kubernetes does not have any nodes in zone-2. Could we have better way to fetch kubernetes nodes zones? Currently that information is not added to kubernetes node labels automatically in openstack (which should I think). I have added those labels manually to nodes. If that zone information is not added to nodes, the new solution does not start stateful pods at all, because it cannot target pods.
cc @rootfs @anguslees @jsafrane
```release-note
Default behaviour in cinder storageclass is changed. If availability is not specified, the zone is chosen by algorithm. It makes possible to spread stateful pods across many zones.
```
Automatic merge from submit-queue
add rootfs gnufied and childsb to volume approver
**What this PR does / why we need it**:
add me and @gnufied @childsb to volume approver
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
Remove unnecessary constants and add type to secret
**What this PR does / why we need it**:
Adds the type field to the secret for the `persistent-volume-provisioning` example of Quobyte. Also remove unnecessary constants in Quobyte Code base.
FYI
@rootfs @saad-ali @quolix
Automatic merge from submit-queue (batch tested with PRs 44590, 44969, 45325, 45208, 44714)
Use dedicated UnixUserID and UnixGroupID types
**What this PR does / why we need it**:
DRYs up type definitions by using the dedicated types in apimachinery
**Which issue this PR fixes**
#38120
**Release note**:
```release-note
UIDs and GIDs now use apimachinery types
```
Automatic merge from submit-queue (batch tested with PRs 44590, 44969, 45325, 45208, 44714)
Refactor volume operation log and error messages
What this PR does / why we need it:
Adds wrappers for volume-specific error and log messages. Each message has a simple version that can be displayed to the user and a detailed version that can be used in logs. The messages that are used for events was also cleaned up. @msau42
Which issue this PR fixes (optional, in fixes #<issue number>(, fixes #<issue_number>, ...) format, will close that issue when PR gets merged): fixes#40905
Special notes for your reviewer:
pkg/kubelet/volumemanager/reconciler/reconciler.go can be refactored. I can do that refactoring after this one.
Release note:
NONE
Automatic merge from submit-queue (batch tested with PRs 45283, 45289, 45248, 44295)
Azure disk: dealing with missing disk probe
**What this PR does / why we need it**:
While Azure disks are expected to attach to SCSI host 3 and above on general purpose instances, on certain Azure instances disks are under SCSI host 2.
This fix searches all LUNs but excludes those used by Azure sys disks, based on udev rules [here](https://raw.githubusercontent.com/Azure/WALinuxAgent/master/config/66-azure-storage.rules)
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
Log node name when error attaching volume
Helps with debugging to know immediately which node the volume failed to atach to. Went through all plugins, added this to 3. @gnufied
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 44601, 44842, 44893, 44491, 44588)
Define const annotation variable once
We do not need to define the const annotation var twice in pkg/volume and pkg/volume/validation
**Release note**:
```release-note
NONE
```
When the attach/detach controller crashes and a pod with attached PV is deleted
afterwards the controller will never detach the pod's attached volumes. To
prevent this the controller should try to recover the state from the nodes
status.
Automatic merge from submit-queue (batch tested with PRs 40055, 42085, 44509, 44568, 43956)
Fix gofmt errors
**What this PR does / why we need it**:
There were some gofmt errors on master. Ran the following to fix:
```
hack/verify-gofmt.sh | grep ^diff | awk '{ print $2 }' | xargs gofmt -w -s
```
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: none
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 40777, 43673)
remove an unnecassary variable assignment in glusterfs_test
**What this PR does / why we need it**:
`path` is exactly the same variable as `volumePath`, which is defined in line 122 . So no needs to assign it.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
```
Automatic merge from submit-queue (batch tested with PRs 44362, 44421, 44468, 43878, 44480)
Delete EmptyDir volume directly instead of renaming the directory.
**What this PR does / why we need it**:
The volume operation executor can handle duplicate requests on the same volume now, so it is not necessary to rename the directory anymore. This change can cause pod deletion to take longer for large emptydir volumes because now the pod waits for the volume to be deleted until it continues pod cleanup. But this is actually required for local disk scheduling so that we don't schedule new pods that need emptydir volumes on the node if the previous emptydir has not be fully reclaimed yet.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#43534
**Special notes for your reviewer**:
**Release note**:
NONE
cc @kubernetes/sig-storage-pr-reviews
Automatic merge from submit-queue
Update owners to include kerneltime
**What this PR does / why we need it**: Update owners to include kerneltime to help with PRs
Automatic merge from submit-queue
Catch error when failed to make directory in NFS volume plugin
NFS: Catch error when failed to make directory
Currently, NFS volume plugin doesn't catch the error from
os.MkdirAll. That makes it difficult to debug why failed to make the
directory. This patch adds error catch to os.MkdirAll.
Automatic merge from submit-queue
azure disk: add logging on disk attach
**What this PR does / why we need it**:
While we were debugging a failed azure disk attach, we were missing logging information to identify the root cause. This fix logs information at each stage of attach to help identify where problem is once it happens again.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
NONE
Automatic merge from submit-queue (batch tested with PRs 44119, 42538, 43802, 42336, 43396)
iSCSI CHAP support
**What this PR does / why we need it**:
To support CHAP authentication in a multi-tenant setup
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
Support iSCSI CHAP authentication
```
Automatic merge from submit-queue
relocate FC multipath readme to examples from pkg/volume
Signed-off-by: rootfs <hchen@redhat.com>
**What this PR does / why we need it**:
`pkg/volume/README.md` is not a good place for Fiber Channel specific doc. Move the block into FC README.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 44008, 41929)
vSphere Cloud Provider: Fstype in storage class
This PR does following,
1. Adds fstype support in storage class for vSphere Cloud Provider.
2. Modify examples to include fstype in storage class.
3. Adds fstype support in storage class for Photon Controller Cloud Provider (@luomiao)
Internally reviewed [here](https://github.com/vmware/kubernetes/pull/88).
cc @pdhamdhere @tusharnt @kerneltime @BaluDontu @divyenpatel @luomiao
Automatic merge from submit-queue (batch tested with PRs 42038, 42083)
Add backup-volfile-servers to mount option.
This feature ensures the `backup servers` in the trusted pool is contacted if there is a failure in the connected server.
Mount option becomes:
mount -t glusterfs -o log-level=ERROR,log-file=/var/lib/kubelet/plugins/kubernetes.io/glusterfs/glustermount/glusterpod-glusterfs.log,backup-volfile-servers=192.168.100.0:192.168.200.0:192.168.43.149 ..
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
Automatic merge from submit-queue
Remove unused method from operation_generator
This is only a removal of the GerifyVolumeIsSafeToDetach [sic] method from operation_executor. The method is not called from anywhere, moreover there is a private method named verifyVolumeIsSafeToDetach (which is being used). This looks like a cut&paste mistake that deserves to be cleaned.
```release-note
NONE
```
Automatic merge from submit-queue
Curate owners for pkg/volume/aws_ebs
The previous list was algorithmically generated; applying some curation.
```release-note
NONE
```
The cloudprovider is being refactored out of kubernetes core. This is being
done by moving all the cloud-specific calls from kube-apiserver, kubelet and
kube-controller-manager into a separately maintained binary(by vendors) called
cloud-controller-manager. The Kubelet relies on the cloudprovider to detect information
about the node that it is running on. Some of the cloudproviders worked by
querying local information to obtain this information. In the new world of things,
local information cannot be relied on, since cloud-controller-manager will not
run on every node. Only one active instance of it will be run in the cluster.
Today, all calls to the cloudprovider are based on the nodename. Nodenames are
unqiue within the kubernetes cluster, but generally not unique within the cloud.
This model of addressing nodes by nodename will not work in the future because
local services cannot be queried to uniquely identify a node in the cloud. Therefore,
I propose that we perform all cloudprovider calls based on ProviderID. This ID is
a unique identifier for identifying a node on an external database (such as
the instanceID in aws cloud).
Automatic merge from submit-queue (batch tested with PRs 42835, 42974)
VSAN policy support for storage volume provisioning inside kubernetes
The vsphere users will have the ability to specify custom Virtual SAN Storage Capabilities during dynamic volume provisioning. You can now define storage requirements, such as performance and availability, in the form of storage capabilities during dynamic volume provisioning. The storage capability requirements are converted into a Virtual SAN policy which are then pushed down to the Virtual SAN layer when a storage volume (virtual disk) is being created. The virtual disk is distributed across the Virtual SAN datastore to meet the requirements.
For example, User creates a storage class with VSAN storage capabilities:
> kind: StorageClass
> apiVersion: storage.k8s.io/v1beta1
> metadata:
> name: slow
> provisioner: kubernetes.io/vsphere-volume
> parameters:
> hostFailuresToTolerate: "2"
> diskStripes: "1"
> cacheReservation: "20"
> datastore: VSANDatastore
The vSphere Cloud provider provisions a virtual disk (VMDK) on VSAN with the policy configured to the disk.
When you know storage requirements of your application that is being deployed on a container, you can specify these storage capabilities when you create a storage class inside Kubernetes.
@pdhamdhere @tthole @abrarshivani @divyenpatel
**Release note**:
```release-note
None
```
Automatic merge from submit-queue (batch tested with PRs 43642, 43170, 41813, 42170, 41581)
Enable storage class support in Azure File volume
**What this PR does / why we need it**:
Support StorageClass in Azure file volume
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
Support StorageClass in Azure file volume
```
Automatic merge from submit-queue (batch tested with PRs 42522, 42545, 42556, 42006, 42631)
Fixes MountVolume.NewMounter errors not displayed to users via describe events
Fixes#42004
This fixes the problem of mount errors being eaten and not displayed to users again. Specifically erros caught in MountVolume.NewMounter (like missing endpoints, etc...)
Current behavior for any mount failure:
```
Events:
FirstSeen LastSeen Count From SubObjectPath Type Reason Message
--------- -------- ----- ---- ------------- -------- ------ -------
12m 12m 1 default-scheduler Normal Scheduled Successfully assigned glusterfs-bb-pod1 to 127.0.0.1
10m 1m 5 kubelet, 127.0.0.1 Warning FailedMount Unable to mount volumes for pod "glusterfs-bb-pod1_default(67c9dfa7-f9f5-11e6-aee2-5254003a59cf)": timeout expired waiting for volumes to attach/mount for pod "default"/"glusterfs-bb-pod1". list of unattached/unmounted volumes=[glusterfsvol]
10m 1m 5 kubelet, 127.0.0.1 Warning FailedSync Error syncing pod, skipping: timeout expired waiting for volumes to attach/mount for pod "default"/"glusterfs-bb-pod1". list of unattached/unmounted volumes=[glusterfsvol]
```
New Behavior:
For example on glusterfs - deliberately didn't create endpoints, now correct message is displayed:
```
Events:
FirstSeen LastSeen Count From SubObjectPath Type Reason Message
--------- -------- ----- ---- ------------- -------- ------ -------
2m 2m 1 default-scheduler Normal Scheduled Successfully assigned glusterfs-bb-pod1 to 127.0.0.1
54s 54s 1 kubelet, 127.0.0.1 Warning FailedMount Unable to mount volumes for pod "glusterfs-bb-pod1_default(8edd2c25-fa09-11e6-92ae-5254003a59cf)": timeout expired waiting for volumes to attach/mount for pod "default"/"glusterfs-bb-pod1". With error timed out waiting for the condition. list of unattached/unmounted volumes=[glusterfsvol]
54s 54s 1 kubelet, 127.0.0.1 Warning FailedSync Error syncing pod, skipping: timeout expired waiting for volumes to attach/mount for pod "default"/"glusterfs-bb-pod1". With error timed out waiting for the condition. list of unattached/unmounted volumes=[glusterfsvol]
2m 6s 814 kubelet, 127.0.0.1 Warning FailedMount MountVolume.NewMounter failed for volume "kubernetes.io/glusterfs/8edd2c25-fa09-11e6-92ae-5254003a59cf-glusterfsvol" (spec.Name: "glusterfsvol") pod "8edd2c25-fa09-11e6-92ae-5254003a59cf" (UID: "8edd2c25-fa09-11e6-92ae-5254003a59cf") with: endpoints "glusterfs-cluster" not found
```
Vladimir Vivien