Automatic merge from submit-queue
Kubelet: Use RepoDigest for ImageID when available
```release-note
Use manifest digest (as `docker-pullable://`) as ImageID when available (exposes a canonical, pullable image ID for containers).
```
Previously, we used the docker config digest (also called "image ID"
by Docker) for the value of the `ImageID` field in the container status.
This was not particularly useful, since the config manifest is not
what's used to identify the image in a registry, which uses the manifest
digest instead. Docker 1.12+ always populates the RepoDigests field
with the manifest digests, and Docker 1.10 and 1.11 populate it when
images are pulled by digest.
This commit changes `ImageID` to point to the the manifest digest when
available, using the prefix `docker-pullable://` (instead of
`docker://`)
Related to #32159
Automatic merge from submit-queue
Run flaky tests in parallel
We should try to emulate the main CI environment in the flaky test suite so that it is clear when a test can be moved out of the flaky suite. Since a common source of flakes is unintended interactions between tests running in parallel, we should run the flaky suite in parallel to better detect such flakes.
Previously, we used the docker config digest (also called "image ID"
by Docker) for the value of the `ImageID` field in the container status.
This was not particularly useful, since the config manifest is not
what's used to identify the image in a registry, which uses the manifest
digest instead. Docker 1.12+ always populates the RepoDigests field
with the manifest digests, and Docker 1.10 and 1.11 populate it when
images are pulled by digest.
This commit changes `ImageID` to point to the the manifest digest when
available, using the prefix `docker-pullable://` (instead of
`docker://`)
Automatic merge from submit-queue
Update GCI_VERSION to gci-dev-55-8866-0-0
Update GCI base image:
Change log:
* Built-in kubernetes updated to v1.4.0
* Enabled VXLAN and IP_SET config options in kernel to support some networking tools
* OpenSSL CVE fixes
```release-note
Update GCI base image:
* Enabled VXLAN and IP_SET config options in kernel to support some networking tools (ebtools)
* OpenSSL CVE fixes
```
cc/ @kubernetes/goog-image cc/ @dchen1107
Automatic merge from submit-queue
Revert "Add kubelet awareness to taint tolerant match caculator."
Reverts kubernetes/kubernetes#26501
Original PR was not fully reviewed by @kubernetes/sig-node
cc/ @timothysc @resouer
Automatic merge from submit-queue
Kubelet: Use RepoDigest for ImageID when available
**Release note**:
```release-note
Use manifest digest (as `docker-pullable://`) as ImageID when available (exposes a canonical, pullable image ID for containers).
```
Previously, we used the docker config digest (also called "image ID"
by Docker) for the value of the `ImageID` field in the container status.
This was not particularly useful, since the config manifest is not
what's used to identify the image in a registry, which uses the manifest
digest instead. Docker 1.12+ always populates the RepoDigests field
with the manifest digests, and Docker 1.10 and 1.11 populate it when
images are pulled by digest.
This commit changes `ImageID` to point to the the manifest digest when
available, using the prefix `docker-pullable://` (instead of
`docker://`)
Related to #32159
Automatic merge from submit-queue
Add kubelet awareness to taint tolerant match caculator.
Add kubelet awareness to taint tolerant match caculator.
Ref: #25320
This is required by `TaintEffectNoScheduleNoAdmit` & `TaintEffectNoScheduleNoAdmitNoExecute `, so that node will know if it should expect the taint&tolerant
Changelog:
* Built-in kubernetes updated to v1.4.0
* Enabled VXLAN and IP_SET config options in kernel to support some networking tools
* OpenSSL CVE fixes
Automatic merge from submit-queue
Revert "Revert "move pod networking tests common""
Reverts #34011
And fix the problem causing `Granular Checks: Services [Slow] should update nodePort` tests to fail
Automatic merge from submit-queue
CRI: Add serial and benchmark test suite.
For https://github.com/kubernetes/kubernetes/issues/31459.
The serial test result will be shown on test-grid.
The benchmark test result will be shown [node-perf-dash](http://node-perf-dash.k8s.io/#/builds)
This PR also changes the cri validation test to use the same gci image with node e2e instead of the canary image. The docker version is still 1.11.2.
@yujuhong @feiskyer @yifan-gu
/cc @kubernetes/sig-node
Automatic merge from submit-queue
CRI: Add presubmit CRI validation test.
For #31459.
This PR adds a new suite for CRI presubmit validation which runs non-flaky, non-serial, non-slow test per-pr.
Except this PR, I'll also change the test-infra side. Ideally, after this is done, we should be be able to trigger CRI validation test per-pr with something like `@k8s-bot cri node e2e test this` and `@k8s-bot cri e2e test this`.
@yujuhong @feiskyer @yifan-gu @freehan
/cc @kubernetes/sig-node
Previously, we used the docker config digest (also called "image ID"
by Docker) for the value of the `ImageID` field in the container status.
This was not particularly useful, since the config manifest is not
what's used to identify the image in a registry, which uses the manifest
digest instead. Docker 1.12+ always populates the RepoDigests field
with the manifest digests, and Docker 1.10 and 1.11 populate it when
images are pulled by digest.
This commit changes `ImageID` to point to the the manifest digest when
available, using the prefix `docker-pullable://` (instead of
`docker://`)
Automatic merge from submit-queue
Fix summary test
Issue was comparing an `unversioned.Time` rather than `time.Time`. I temporarily removed the `[Flaky]` tag so the PR builder will run the test. I will revert that change before submitting.
Automatic merge from submit-queue
Change minion to node
Continuation of #1111
I tried to keep this PR down to just a simple search-n-replace to keep
things simple. I may have gone too far in some spots but its easy to
roll those back if needed - just let me know.
I avoided renaming `contrib/mesos/pkg/minion` because there's already
a `contrib/mesos/pkg/node` dir and fixing that will require a bit of work
due to a circular import chain that pops up. So I'm saving that for a
follow-on PR.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Contination of #1111
I tried to keep this PR down to just a simple search-n-replace to keep
things simple. I may have gone too far in some spots but its easy to
roll those back if needed.
I avoided renaming `contrib/mesos/pkg/minion` because there's already
a `contrib/mesos/pkg/node` dir and fixing that will require a bit of work
due to a circular import chain that pops up. So I'm saving that for a
follow-on PR.
I rolled back some of this from a previous commit because it just got
to big/messy. Will follow up with additional PRs
Signed-off-by: Doug Davis <dug@us.ibm.com>
Automatic merge from submit-queue
Allow garbage collection to work against different API prefixes
The GC needs to build clients based only on Resource or Kind. Hoist the
restmapper out of the controller and the clientpool, support a new
ClientForGroupVersionKind and ClientForGroupVersionResource, and use the
appropriate one in both places.
Allows OpenShift to use the GC
Automatic merge from submit-queue
Fix node performance benchmark by using latest containervm image (docker 1.11.2)
Also add two more tests for resource tracking.
cc/ @Random-Liu @coufon
The GC needs to build clients based only on Resource or Kind. Hoist the
restmapper out of the controller and the clientpool, support a new
ClientForGroupVersionKind and ClientForGroupVersionResource, and use the
appropriate one in both places.
Automatic merge from submit-queue
Node E2E: Change the disk eviction test to pull images again after the test.
Fixes https://github.com/kubernetes/kubernetes/issues/32022#issuecomment-248677706.
This PR changes the disk eviction test to pull test images again in `AfterEach`, because images may be evicted during the test.
@yujuhong
/cc @kubernetes/sig-node
Automatic merge from submit-queue
Make node E2E tests more transparent
Add some logging and minor code reorg to make the node E2E tests a little more transparent and understandable.
Automatic merge from submit-queue
Update the containervm image to the latest one (container-v1-3-v20160…
Node e2e is running with old containervm image which only has docker 1.9.1. This pr fixed such issue.
Automatic merge from submit-queue
Fix the properties file for node e2e cri validation.
I fixed this locally before, but accidentally missed in the PR. Sorry about that.
This time, I've tried myself, it should work.
@yujuhong
Automatic merge from submit-queue
Bump up GCI version.
```release-note
Upgrading Container-VM base image for k8s on GCE. Brief changelog as follows:
- Fixed performance regression in veth device driver
- Docker and related binaries are statically linked
- Fixed the issue of systemd being oom-killable
```
Fixes#32596
This needs a cherrypick into v1.4 release branch because it is fixing v1.4 release blocking issues. This patch is easy and safe to rollback in case of emergencies.
@vishh can you please review?
Fixes#32596 and many other issues.
cc/ @kubernetes/goog-image FYI
Brief changelog compared to gci-dev-54-8743-3-0:
- Fixed performance regression in veth device driver
- Docker and related binaries are statically linked
- Fixed the issue of systemd being oom-killable
- Updated built-in kubelet version to 1.3.7
- add ethtool and ebtables binaries expected by kubelet
Fixes#32596
Automatic merge from submit-queue
Node E2E: Add image white list
This is part of #29081. Fixes#29155.
As is discussed with @yujuhong in #29155, it is difficult to maintain the prepull image list if it is not enforced.
This PR added an image white list in the test framework, only images in the white list could be used in the test. If the image is not in the white list, the test will fail with reason:
```
Image "XXX" is not in the white list, consider adding it to CommonImageWhiteList in test/e2e/common/util.go or NodeImageWhiteList in test/e2e_node/image_list.go
```
Notice that if image pull policy is `PullAlways`, the image is not necessary to be in the white list or prepulled, because the test expects the image to be pulled during the test.
Currently, the image white list is only enabled in node e2e, because the image puller in e2e test is not integrated with the image white list yet.
/cc @kubernetes/sig-node
Automatic merge from submit-queue
[kubelet] Fix oom-score-adj policy in kubelet
Fixes#32238
We have been having this regression since v1.3. It is critical for GKE/GCE deployments of k8s because docker daemon has a high likelihood of being OOM killed which will end up nuking all containers.
The reason for moving from mnt to pid is that docker daemon moves itself into a new mnt namespace with systemd based deployments.
Automatic merge from submit-queue
change the error log for empty resource usage
This PR changes the error log for empty resource usage buffer for a container to be more clear. It happens when the container name is wrong, or cAdvisor somehow does not response.
Automatic merge from submit-queue
Get image and machine info from apiserver in node e2e test
This PR changes node e2e test to get image and machine information from API server instead of pass them from Jenkins test framework. The original format to pass image and machine info is naming the test node as "machine-image-uuid", which is hard to parse because "-" occurs a lot in both machine and image names.
Now we add two labels "image" and "machine" into performance data. The machine type has the format "cpu:1core,memory:3.6GB".
This PR is based on #32250.
Automatic merge from submit-queue
Add node e2e density test using 60 QPS for benchmark
This PR adds a new benchmark node e2e density test which sets Kubelet API QPS limit from default 5 to 60, through ConfigMap.
The latency caused by API QPS limit is as large as ~30% when creating a large batch of pods (e.g. 105). It makes the pod startup latency, as well creation throughput underestimated. This test helps us to know the real performance of Kubelet core.
Automatic merge from submit-queue
Update container image version for downward api volume tests
Some tests were using 0.7, and some were using 0.6, so updating all to 0.7.
@kubernetes/rh-cluster-infra
Automatic merge from submit-queue
Automated Docker Validation: Change wrong name in perf config.
The config key `containervm-density*` is improper, remove it.
/cc @coufon
Automatic merge from submit-queue
Log pressure condition, memory usage, events in memory eviction test
I want to log this to help us debug some of the latest memory eviction test flakes, where we are seeing burstable "fail" before the besteffort. I saw (in the logs) attempts by the eviction manager to evict besteffort a while before burstable phase changed to "Failed", but the besteffort's phase appeared to remain "Running". I want to see the pressure condition interleaved with the pod phases to get a sense of the eviction manager's knowledge vs. pod phase.
Automatic merge from submit-queue
Plumb --feature-gates from TEST_ARGS to components in node e2e tests
This means you can set `TEST_ARGS` on the command line, in a `.properties` config for a Jenkins job, etc, to toggle gated features. For example:
`TEST_ARGS='--feature-gates=DynamicKubeletConfig=true'`
/cc @vishh @jlowdermilk
Automatic merge from submit-queue
Rename ConnectToDockerOrDie to CreateDockerClientOrDie
This function does not actually attempt to connect to the docker daemon, it just creates a client object that can be used to do so later. The old name was confusing, as it implied that a failure to touch the docker daemon could cause program termination (rather than just a failure to create the client).
Automatic merge from submit-queue
Node E2E: Fix wrong permission bit for log file.
When creating log for logs from journald, we use `0755` which is weird to me.
This PR changes it to `0666`.
Kubernetes Submit Queue