Automatic merge from submit-queue
AWS: Change default networking for kube-up to kubenet
**What this PR does / why we need it**: Fixes AWS bring-up. Again.
There's a kubelet bug that prevents NETWORK_PROVIDER=none from working right now, and we should migrate AWS to `kubenet` anyways.
Working on reproing the `none` issue on GCE, then I'll file a bug on the main issue. But this fixes AWS, so quick tactical fix.
Automatic merge from submit-queue
Use etcd 2.3.7
This will switch to etcd 2.3.7 for release 1.4, to resolve issues rolling back from 1.4 to 1.3 (while preventing those same issues rolling back to 1.4.0 from a release including etcd 3.0.x).
Fixes#32253.
See #32253 (comment) for etcd roadmap.
Automatic merge from submit-queue
Fix 127.0.01 typo
**What this PR does / why we need it**:
Fixes a small typo, though typo seems inconsequential
**Release note**:
none
Automatic merge from submit-queue
Enable kubelet eviction whenever inodes free is < 5% on GCE
This is a pre-req for enabling inodes based evictions in GKE.
Automatic merge from submit-queue
Make image-puller work on GCI nodes.
Currently image-puller works only on debian nodes. This will make our test more flaky after we switch to the GCI by default. This PR ports the image-puller to the GCI-based Nodes.
cc @vishh @wonderfly @dchen1107
Automatic merge from submit-queue
rkt: Update kube-up rkt version to v1.14.0
cc @kubernetes/sig-rktnetes
This should have been included in #31286 (whoops).
This is a bugfix that I propose for v1.4 inclusion.
Automatic merge from submit-queue
move '(master)' to end of message for uniformity
**What this PR does / why we need it**: This is a small polish operation on the kubernetes charm wrt juju status output.
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```release-note
NONE
```
This changes the status output from:
```
kubernetes/0 active idle 3 172.27.24.54 8088/tcp
Kubernetes running.
kubernetes/1 active idle 4 172.27.24.55 6443/tcp
(master) Kubernetes services started
```
to this:
```
kubernetes/0 active idle 3 172.27.24.54 8088/tcp
Kubernetes running.
kubernetes/1 active idle 4 172.27.24.55 6443/tcp
Kubernetes services started (master)
```
As part of #29213, the hyperkube image will be deployed alongside
existing dependencies.
This ends up just running over the root disk size of 10 during
extraction.
Automatic merge from submit-queue
Set eviction-hard for vagrant cluster
In order to test eviction related functionality it will be convenient to have reasonable eviction defaults.
At this moment exactly same flags are used by GCE environment
kubelet will have a following flag:
--eviction-hard=memory.available<100Mi,nodefs.available<10%
In order to test eviction related functionality it will be convenient
to have reasonable eviction defaults.
At this moment exactly same flags are used by GCE environment
kubelet will have a following flag:
--eviction-hard=memory.available<100Mi,nodefs.available<10%
Change-Id: I56ca03bc3c5467c8450150e292f7a346fa7772a9
Automatic merge from submit-queue
Fix Bash script
<!-- Thanks for sending a pull request! Here are some tips for you:
1. If this is your first time, read our contributor guidelines https://github.com/kubernetes/kubernetes/blob/master/CONTRIBUTING.md and developer guide https://github.com/kubernetes/kubernetes/blob/master/docs/devel/development.md
2. If you want *faster* PR reviews, read how: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/faster_reviews.md
3. Follow the instructions for writing a release note: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/pull-requests.md#release-notes
-->
**What this PR does / why we need it**: `cluster/mesos/docker/socat/build.sh` had two lines mixed together.
Old command output:
```
$ ./cluster/mesos/docker/socat/build.sh
./cluster/mesos/docker/socat/build.sh: line 21: set: pipefailscript_dir=/home/rodolfo/src/k8s.io/kubernetes/cluster/mesos/docker/socat: invalid option name
```
**Special notes for your reviewer**: probably nobody is using that script? @sttts PTAL.
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```release-note
NONE
```
Automatic merge from submit-queue
Enable Rescheduler by default
Rescheduler is stable - e2e test is passing constantly for >1week.
ref #29023
```release-note
Rescheduler which ensures that critical pods are always scheduled enabled by default in GCE.
```
Automatic merge from submit-queue
Pick a specific GCI version by default on GCE.
Prior to this change, a K8s branch (master as well as release) was
pinned to a GCI milestone. It would pick up the latest GCI release on
that milestone at the time of cluster creation. The rationale was the
K8s users would automatically get the bug fixes in newer versions of
GCI. However in practice, it makes the runtime environment
non-deterministic, and lack of continuous e2e tests mean we would run
into breakages sooner or later.
With this change, each K8s release will pick a specific version
of GCI by default (similar to how the Debian-based container-vm gets used).
Users can override the default version through KUBE_GCE_MASTER_IMAGE and
KUBE_GCE_NODE_IMAGE environment variables.
We expect the default GCI version will be updated relatively frequently stay
updated with newer GCI releases. We can also automate the process to
automatically bump the hard-coded GCI version in future.
@vishh @adityakali can you please review?
cc @kubernetes/goog-image FYI
Automatic merge from submit-queue
Store startupscript from GKE clusters too
Ref https://github.com/kubernetes/kubernetes/issues/31215
@kubernetes/goog-gke Is there any reason why we don't want to do it?
@kubernetes/test-infra-maintainers
Prior to this change, a K8s branch (master as well as release) was
pinned to a GCI milestone. It would pick up the latest GCI release on
that milestone at the time of cluster creation. The rationale was the
K8s users would automatically get the bug fixes in newer versions of
GCI. However in practice, it makes the runtime environment
non-deterministic, and lack of continuous e2e tests mean we would run
into breakages sooner or later.
With this change, each K8s release will pick a specific version
of GCI by default (similar to how the Debian-based container-vm gets used).
Users can override the default version through KUBE_GCE_MASTER_IMAGE and
KUBE_GCE_NODE_IMAGE environment variables.
We expect the default GCI version will be updated relatively frequently stay
updated with newer GCI releases. We can also automate the process to
automatically bump the hard-coded GCI version in future.
This changes the status output from:
```
kubernetes/0 active idle 3 172.27.24.54 8088/tcp
Kubernetes running.
kubernetes/1 active idle 4 172.27.24.55 6443/tcp
(master) Kubernetes services started
```
to this:
```
kubernetes/0 active idle 3 172.27.24.54 8088/tcp
Kubernetes running.
kubernetes/1 active idle 4 172.27.24.55 6443/tcp
Kubernetes services started (master)
```
Juju bootstrapping is an act of cost. This should be an explicit action
by the tooling surrounding bundle-tester when testing a charm. Setting
bootstrap:false will allow us to get faster feedback at lower cost when
running the kubernetes charm under ci. Additionally doesn't reset so
no communication attempt is made to the controller
Additionally add tox to test dependency list
Automatic merge from submit-queue
keep docker0 with private cidr range
fixes: #31465
Keep docker0 when using kubenet on GCI. Assign 169.254.123.1/24 to docker0 to avoid cidr conflict.
Automatic merge from submit-queue
AWS: Hopefully fix e2e?
**What this PR does / why we need it**: Fix AWS e2e
**Which issue this PR fixes**: fixes build broken by #28499
**Special notes for your reviewer**: This is a pump & dump, I probably won't be around to respond to comments after this. If it needs a cherry-pick or anything, please check?
Automatic merge from submit-queue
Remove deprecated Namespace admission plug-ins
```release-note
The NamespaceExists and NamespaceAutoProvision admission controllers have been removed.
All cluster operators should use NamespaceLifecycle.
```
Fixes https://github.com/kubernetes/kubernetes/issues/31195
Automatic merge from submit-queue
fix feature_gates salt plumbing
Fix salt plumbing for `--feature-gate` from `FEATURE_GATES kube env.
Was generating grains.conf and kube-env for master only. Verified it works now for gci and debian master/nodes.
cc @thockin @timstclair
Automatic merge from submit-queue
Build and push kube-dns for 1.4 release.
Fix#31355.
Following docker images had been uploaded:
gcr.io/google_containers/kubedns-amd64:1.7
gcr.io/google_containers/kubedns-arm:1.7
gcr.io/google_containers/kubedns-arm64:1.7
Build for ppc64le is disabled by default, and it failed to be built using:
`KUBE_BUILD_PPC64LE=y make release`
I'm still working on making the ppc64le build. Updates will be added following this thread.
@girishkalele @thockin
Automatic merge from submit-queue
Add ExternalName kube-dns e2e test
ExternalName allows kubedns to return CNAME records for external
services. No proxying is involved.
Built on top of and includes #30599
See original issue at
https://github.com/kubernetes/kubernetes/issues/13748
Feature tracking at
https://github.com/kubernetes/features/issues/33
The e2e test is at least as comprehensive as the one for headless services (namely, only to some degree)
```release-note
Add ExternalName services as CNAME references to external ones
```
Automatic merge from submit-queue
gci: decouple from the built-in kubelet version
Prior to this change, configure.sh would:
(1) compare versions of built-in kubelet and downloaded kubelet, and
(2) bind-mount downloaded kubelet at /usr/bin/kubelet in case of
version mismatch
With this change, configure.sh:
(1) compares the two versions only on test clusters, and
(2) uses the actual file paths to start kubelet w/o any bind-mounting
To allow (2), this change also provides its own version of kubelet
systemd service file.
Effectively with this change we will always use the downloaded kubelet
binary along with its own systemd service file on non-test clusters. The
main advantage is this change does not rely on the kubelet being built in to
the OS image.
@dchen1107 @wonderfly can you please review
cc/ @kubernetes/goog-image FYI
Prior to this change, configure.sh would:
(1) compare versions of built-in kubelet and downloaded kubelet, and
(2) bind-mount downloaded kubelet at /usr/bin/kubelet in case of
version mismatch
With this change, configure.sh:
(1) compares the two versions only on test clusters, and
(2) uses the actual file paths to start kubelet w/o any bind-mounting
To allow (2), this change also provides its own version of kubelet
systemd service file.
Effectively with this change we will always use the downloaded kubelet
binary along with its own systemd service file on non-test clusters. The
main advantage is this change does not rely on the kubelet being built in to
the OS image.
Automatic merge from submit-queue
Add validation for KUBE_USER
Malformed KUBE_USER causes error in cluster setup.
cc/ @kubernetes/goog-image
@Q-Lee @Amey-D Can you please review?
Automatic merge from submit-queue
Add admission controller for default storage class.
The admission controller adds a default class to PVCs that do not require any
specific class. This way, users (=PVC authors) do not need to care about
storage classes, administrator can configure a default one and all these PVCs
that do not care about class will get the default one.
The marker of default class is annotation "volume.beta.kubernetes.io/storage-class", which must be set to "true" to work. All other values (or missing annotation) makes the class non-default.
Based on @thockin's code, added tests and made it not to reject a PVC when no class is marked as default.
.
@kubernetes/sig-storage
Automatic merge from submit-queue
Reduce size of images fluentd-gcp and fluentd-elasticsearch
replaces #26652
```
aledbf/fluentd-elasticsearch 1.19 769ece5c8ba8 About an hour ago 269.9 MB
gcr.io/google_containers/fluentd-elasticsearch 1.18 0a8cbfbea7f7 5 weeks ago 530.3 MB
aledbf/fluentd-gcp 1.22 ef979b82a767 About an hour ago 307.9 MB
gcr.io/google_containers/fluentd-gcp 1.21 0ef09b1bcfd7 2 weeks ago 498.5 MB
```
closes#29782
Automatic merge from submit-queue
Configure webhook
**What this PR does / why we need it**: this configures the image policy webhook + admission controller for gce/gci.
addresses: #22888
**Release note**:
```Configure image verification admission controller and webhook on gce.
```
Automatic merge from submit-queue
Support for creation/removal of master replicas.
HA master: initial support for creation/removal of masters replicas by
kube-up/kube-down scripts for GCE on gci (other distributions, including debian, are not supported yet).
Automatic merge from submit-queue
fix path handling in hack/lib/init.sh
Jenkinsfile pipeline jobs get cloned into "\<project\> (\<branch\>)". As a result, I can't use certain things in `hack/lib/init.sh`.
This is a small fix for that problem.
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```release-note
NONE
```
Automatic merge from submit-queue
Enable the garbage collector by default
Turning GC on by default.
Memory usage of GC is back to normal after #30943. The CPU usage is a little higher than the cap in scalability test (1.11 core vs. 1 core). This PR adjusted the default GC worker to 20 to see if that helps CPU usage.
@kubernetes/sig-api-machinery @wojtek-t @lavalamp
Automatic merge from submit-queue
Bump heapster version
Bump heapster version to v1.2.0-beta.1.
Migrate metrics tests and HPA to use List objects introduced in the new version.
The admission controller adds a default class to PVCs that do not require any
specific class. This way, users (=PVC authors) do not need to care about
storage classes, administrator can configure a default one and all these PVCs
that do not care about class will get the default one.
Automatic merge from submit-queue
Use --regions instead of --region for gcloud list [resource]
gcloud has started complaining:
```
WARNING: Abbreviated flag [--region] will be disabled in release 132.0.0, use the full name [--regions].
WARNING: Abbreviated flag [--region] will be disabled in release 132.0.0, use the full name [--regions].
WARNING: Abbreviated flag [--region] will be disabled in release 132.0.0, use the full name [--regions].
```
We'll probably need to cherry-pick this, as otherwise the list-resources script will start failing at some point in the future.
Automatic merge from submit-queue
Let load and density e2e tests use GC if it's on
I've run the 100 and 500 nodes tests and they both pass.
The test-infra half of the PR is https://github.com/kubernetes/test-infra/pull/369
cc @lavalamp
Automatic merge from submit-queue
Update core etcd references to use 3.0.4
This updates the core references to use 3.0.4.
There are still legacy references in the code base that should be cleaned, or just removed but I'm reluctant to purge.
/cc @kubernetes/sig-scalability
Automatic merge from submit-queue
Add user-specified kubectl arguments to addons start script
This is a simple way, using the same environment variable paradigm used throughout these scripts, to let a user specify kubectl arguments to the addons script.
fixes#30371
Automatic merge from submit-queue
Avoid unnecessary copies on GCI initialization.
The issue I faced was that when starting a cluster I was getting:
```
Aug 12 11:12:46 e2e-test-wojtekt-master configure.sh[1079]: cp: error writing '/home/kubernetes/kubernetes-src.tar.gz': No space left on device
```
This PR reduces amount of space that is needed on startup, as well as this speeds up starting cluster.
@lavalamp @dchen1107
Automatic merge from submit-queue
Add support for kube-up.sh to deploy Calico network policy to GCI masters
Also remove requirement for calicoctl from Debian / salt installed nodes and clean it up a little by deploying calico-node with a manifest rather than calicoctl. This also makes it more reliable by retrying properly.
How to use:
```
make quick-release
NETWORK_POLICY_PROVIDER=calico cluster/kube-up.sh
```
One place where I was uncertain:
- CPU allocations (on the master particularly, where there's very little spare capacity). I took some from etcd, but if there's a better way to decide this, I'm happy to change it.
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.kubernetes.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.kubernetes.io/reviews/kubernetes/kubernetes/29037)
<!-- Reviewable:end -->
Automatic merge from submit-queue
Fix error reporting during vagrant provisioning
<!--
Checklist for submitting a Pull Request
Please remove this comment block before submitting.
1. Please read our [contributor guidelines](https://github.com/kubernetes/kubernetes/blob/master/CONTRIBUTING.md).
2. See our [developer guide](https://github.com/kubernetes/kubernetes/blob/master/docs/devel/development.md).
3. If you want this PR to automatically close an issue when it is merged,
add `fixes #<issue number>` or `fixes #<issue number>, fixes #<issue number>`
to close multiple issues (see: https://github.com/blog/1506-closing-issues-via-pull-requests).
4. Follow the instructions for [labeling and writing a release note for this PR](https://github.com/kubernetes/kubernetes/blob/master/docs/devel/pull-requests.md#release-notes) in the block below.
-->
`release_not_found` shell function can be used both while running
`provision-master.sh` and `privision-node.sh` (it's used by `install-salt`
function in `provision-utils.sh`, but it was defined in `provision-master.sh`.
Because of this, one of my colleagues got the following diagnostic:
```
==> master: Succeeded: 52 (changed=8)
==> master: Failed: 0
==> master: -------------
==> master: Total states run: 52
==> node-1: Machine already provisioned. Run `vagrant provision` or use the `--provision`
==> node-1: flag to force provisioning. Provisioners marked to run always will still run.
==> node-1: Running provisioner: shell...
node-1: Running: /tmp/vagrant-shell20160726-19144-hahnl1.sh
==> node-1: Prepare package manager
==> node-1: Provisioning network on node
==> node-1: Network configuration verified
==> node-1: /tmp/vagrant-shell: line 134: release_not_found: command not found
The SSH command responded with a non-zero exit status. Vagrant
assumes that this means the command failed. The output for this command
should be in the log above. Please read the output to determine what
went wrong.
```
... which is rather confusing.
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.kubernetes.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.kubernetes.io/reviews/kubernetes/kubernetes/29610)
<!-- Reviewable:end -->
Automatic merge from submit-queue
Use latest GCI image based on a regex in Node e2e
This PR also makes it possible to run node e2e against multiple previous images, sorted by creation time. A regex for the image name can be used to instruct node e2e to identify test images.
Depends on #29577
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.kubernetes.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.kubernetes.io/reviews/kubernetes/kubernetes/29815)
<!-- Reviewable:end -->
Automatic merge from submit-queue
AWS: Allow no-op kube-down to exit 0
Not exactly sure why hack/e2e.go `IsUp()` is returning true right now,
but I can solve this a different way. This unifies with the GCE
behavior, which is that no-op kube-down returns 0.
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.kubernetes.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.kubernetes.io/reviews/kubernetes/kubernetes/30380)
<!-- Reviewable:end -->
It can run tests against multiple existing images that match a regex.
GCI images will be using a regex.
Signed-off-by: Vishnu kannan <vishnuk@google.com>
Not exactly sure why hack/e2e.go IsUp() is returning true right now,
but I can solve this a different way. This unifies with the GCE
behavior, which is that no-op kube-down returns 0.
Automatic merge from submit-queue
Add cleanup addon pod to remove empty keys from etcd
namespace deletion will leave a trace of empty keys on etcd. This PR adds an addon pod to periodically check for those empty keys on etcd and remove them.
fixes#27307
Automatic merge from submit-queue
Edits to bring the tls-terminated etcd cluster to the layer.
fixes#23198
```release-note
* Updates required for juju kubernetes to use the tls-terminated etcd charm.
```
* Use the current stable CoreOS image
* Switch to etcd2
* Launch flanneld on master to make nodes accessible
* Generate Service Account certificate and enable admission controls
Automatic merge from submit-queue
Cleanup k8s script noise with a verbosity concept
Fixes https://github.com/kubernetes/kubernetes/issues/30109
The KUBE_VERBOSE environment variable sets the verbosity level to
use. Log messages can specify a verbosity by setting the V
variable. e.g.
V=2 kube::log::info foo bar
Would only print "foo bar" if $KUBE_VERBOSE >= 2.
Examples:
Default verbosity (1 for make commands):
```
$ make kubelet
+++ [0804 17:23:32] Generating bindata:
/usr/local/google/home/stclair/go/k8s3/src/k8s.io/kubernetes/test/e2e/framework/gobindata_util.go
+++ [0804 17:23:37] Building the toolchain targets:
k8s.io/kubernetes/hack/cmd/teststale
+++ [0804 17:23:37] Building go targets for linux/amd64:
cmd/kubelet
# k8s.io/kubernetes/pkg/kubelet
pkg/kubelet/kubelet.go:247: undefined: a
make: *** [kubelet] Error 1
```
Extra verbose (5, comparable to previous levels):
<details>
```
$ make kubelet KUBE_VERBOSE=5
I0804 17:31:05.083395 2601 parse.go:353] type checker error: /usr/local/google/home/stclair/.gvm/gos/go1.6.2/src/runtime/trace.go:151:30: cannot use (traceBufHeader literal) (value of type traceBufHeader) as unsafe.ArbitraryType value in argument to unsafe.Sizeof
I0804 17:31:05.083503 2601 parse.go:353] type checker error: /usr/local/google/home/stclair/.gvm/gos/go1.6.2/src/runtime/trace.go:151:7: array length 64 << 10 - unsafe.Sizeof((traceBufHeader literal)) (value of type uintptr) must be constant
I0804 17:31:05.083600 2601 parse.go:353] type checker error: /usr/local/google/home/stclair/.gvm/gos/go1.6.2/src/runtime/mgcwork.go:269:37: cannot use (workbufhdr literal) (value of type workbufhdr) as unsafe.ArbitraryType value in argument to unsafe.Sizeof
I0804 17:31:05.083654 2601 parse.go:353] type checker error: /usr/local/google/home/stclair/.gvm/gos/go1.6.2/src/runtime/mgcwork.go:269:7: array length (_WorkbufSize - unsafe.Sizeof((workbufhdr literal))) / sys.PtrSize (value of type uintptr) must be constant
I0804 17:31:05.084006 2601 parse.go:353] type checker error: /usr/local/google/home/stclair/.gvm/gos/go1.6.2/src/runtime/chan.go:21:28: cannot use (hchan literal) (value of type hchan) as unsafe.ArbitraryType value in argument to unsafe.Sizeof
I0804 17:31:05.084040 2601 parse.go:353] type checker error: /usr/local/google/home/stclair/.gvm/gos/go1.6.2/src/runtime/chan.go:21:66: cannot use (hchan literal) (value of type hchan) as unsafe.ArbitraryType value in argument to unsafe.Sizeof
I0804 17:31:05.084076 2601 parse.go:353] type checker error: /usr/local/google/home/stclair/.gvm/gos/go1.6.2/src/runtime/chan.go:21:14: unsafe.Sizeof((hchan literal)) + uintptr(-int(unsafe.Sizeof((hchan literal))) & (maxAlign - 1)) (value of type uintptr) is not constant
I0804 17:31:05.085536 2601 parse.go:353] type checker error: /usr/local/google/home/stclair/.gvm/gos/go1.6.2/src/runtime/hashmap.go:80:31: cannot use (struct{b bmap; v int64} literal).v (value of type int64) as unsafe.ArbitraryType value in argument to unsafe.Offsetof
I0804 17:31:05.085567 2601 parse.go:353] type checker error: /usr/local/google/home/stclair/.gvm/gos/go1.6.2/src/runtime/hashmap.go:80:15: unsafe.Offsetof((struct{b bmap; v int64} literal).v) (value of type uintptr) is not constant
I0804 17:31:05.085788 2601 parse.go:353] type checker error: /usr/local/google/home/stclair/.gvm/gos/go1.6.2/src/runtime/hashmap.go:1053:45: cannot convert &zeroinitial (value of type *[1024]byte) to unsafe.Pointer
I0804 17:31:05.086995 2601 parse.go:353] type checker error: /usr/local/google/home/stclair/.gvm/gos/go1.6.2/src/runtime/mfinal.go:20:65: cannot use (finalizer literal) (value of type finalizer) as unsafe.ArbitraryType value in argument to unsafe.Sizeof
I0804 17:31:05.087031 2601 parse.go:353] type checker error: /usr/local/google/home/stclair/.gvm/gos/go1.6.2/src/runtime/mfinal.go:20:11: array length (_FinBlockSize - 2 * sys.PtrSize - 2 * 4) / unsafe.Sizeof((finalizer literal)) (value of type uintptr) must be constant
I0804 17:31:05.087957 2601 parse.go:353] type checker error: /usr/local/google/home/stclair/.gvm/gos/go1.6.2/src/runtime/mstats.go:170:39: cannot use memstats.by_size (variable of type [67]struct{size uint32; nmalloc uint64; nfree uint64}) as unsafe.ArbitraryType value in argument to unsafe.Offsetof
I0804 17:31:05.087999 2601 parse.go:353] type checker error: /usr/local/google/home/stclair/.gvm/gos/go1.6.2/src/runtime/mstats.go:170:76: cannot use memstats.by_size[0] (variable of type struct{size uint32; nmalloc uint64; nfree uint64}) as unsafe.ArbitraryType value in argument to unsafe.Sizeof
I0804 17:31:05.088483 2601 parse.go:353] type checker error: /usr/local/google/home/stclair/.gvm/gos/go1.6.2/src/runtime/panic.go:118:34: cannot use (_defer literal) (value of type _defer) as unsafe.ArbitraryType value in argument to unsafe.Sizeof
I0804 17:31:05.088510 2601 parse.go:353] type checker error: /usr/local/google/home/stclair/.gvm/gos/go1.6.2/src/runtime/panic.go:118:20: unsafe.Sizeof((_defer literal)) (value of type uintptr) is not constant
I0804 17:31:05.089812 2601 parse.go:353] type checker error: /usr/local/google/home/stclair/.gvm/gos/go1.6.2/src/runtime/sema.go:42:42: cannot use (semaRoot literal) (value of type semaRoot) as unsafe.ArbitraryType value in argument to unsafe.Sizeof
I0804 17:31:05.089845 2601 parse.go:353] type checker error: /usr/local/google/home/stclair/.gvm/gos/go1.6.2/src/runtime/sema.go:42:8: array length sys.CacheLineSize - unsafe.Sizeof((semaRoot literal)) (value of type uintptr) must be constant
I0804 17:31:05.094634 2601 parse.go:307] type checking encountered some errors in "runtime", but ignoring.
I0804 17:31:05.875185 2601 parse.go:353] type checker error: /usr/local/google/home/stclair/go/k8s3/src/k8s.io/kubernetes/_output/local/go/src/k8s.io/kubernetes/vendor/github.com/davecgh/go-spew/spew/bypass.go:33:26: cannot use (*byte)(nil) (value of type *byte) as unsafe.ArbitraryType value in argument to unsafe.Sizeof
I0804 17:31:05.875234 2601 parse.go:353] type checker error: /usr/local/google/home/stclair/go/k8s3/src/k8s.io/kubernetes/_output/local/go/src/k8s.io/kubernetes/vendor/github.com/davecgh/go-spew/spew/bypass.go:33:12: unsafe.Sizeof((*byte)(nil)) (value of type uintptr) is not constant
I0804 17:31:05.875838 2601 parse.go:307] type checking encountered some errors in "github.com/davecgh/go-spew/spew", but ignoring.
I0804 17:31:05.897216 2601 parse.go:353] type checker error: /usr/local/google/home/stclair/.gvm/gos/go1.6.2/src/crypto/cipher/xor.go:12:36: cannot use uintptr(0) (constant 0 of type uintptr) as unsafe.ArbitraryType value in argument to unsafe.Sizeof
I0804 17:31:05.897261 2601 parse.go:353] type checker error: /usr/local/google/home/stclair/.gvm/gos/go1.6.2/src/crypto/cipher/xor.go:12:18: int(unsafe.Sizeof(uintptr(0))) (value of type int) is not constant
I0804 17:31:05.897360 2601 parse.go:307] type checking encountered some errors in "crypto/cipher", but ignoring.
I0804 17:31:06.400904 2601 conversion.go:227] considering pkg "k8s.io/kubernetes/federation/apis/core/v1"
I0804 17:31:06.401138 2601 conversion.go:243] tags: ["k8s.io/kubernetes/federation/apis/core"]
I0804 17:31:06.427408 2601 conversion.go:283] no viable conversions, not generating for this package
I0804 17:31:06.427508 2601 main.go:73] Completed successfully.
Go version: go version go1.6.2 linux/amd64
+++ [0804 17:31:06] Generating bindata:
/usr/local/google/home/stclair/go/k8s3/src/k8s.io/kubernetes/test/e2e/framework/gobindata_util.go
Generated bindata file : 11536 ../../..//test/e2e/generated/bindata.go lines of lovely automated artifacts
+++ [0804 17:31:12] Building the toolchain targets:
k8s.io/kubernetes/hack/cmd/teststale
+++ [0804 17:31:12] Building go targets for linux/amd64:
cmd/kubelet
# k8s.io/kubernetes/pkg/kubelet
pkg/kubelet/kubelet.go:247: undefined: a
!!! Error in /usr/local/google/home/stclair/go/k8s3/src/k8s.io/kubernetes/hack/lib/golang.sh:506
'go install "${goflags[@]:+${goflags[@]}}" -gcflags "${gogcflags}" -ldflags "${goldflags}" "${nonstatics[@]:+${nonstatics[@]}}"' exited with status 2
Call stack:
1: /usr/local/google/home/stclair/go/k8s3/src/k8s.io/kubernetes/hack/lib/golang.sh:506 kube::golang::build_binaries_for_platform(...)
2: /usr/local/google/home/stclair/go/k8s3/src/k8s.io/kubernetes/hack/lib/golang.sh:692 kube::golang::build_binaries(...)
3: hack/make-rules/build.sh:27 main(...)
Exiting with status 1
!!! Error in /usr/local/google/home/stclair/go/k8s3/src/k8s.io/kubernetes/hack/lib/golang.sh:596
'( kube::golang::setup_env; echo "Go version: $(go version)"; local host_platform; host_platform=$(kube::golang::host_platform); local goflags goldflags gogcflags; eval "goflags=(${KUBE_GOFLAGS:-})"; goldflags="${KUBE_GOLDFLAGS:-} $(kube::version::ldflags)"; gogcflags="${KUBE_GOGCFLAGS:-}"; local use_go_build; local -a targets=(); local arg; readonly BINDATAS=("${KUBE_ROOT}/test/e2e/framework/gobindata_util.go"); kube::log::status "Generating bindata:" "${BINDATAS[@]}"; for bindata in ${BINDATAS[@]};
do
if [[ -f $bindata ]]; then
go generate "${bindata}";
fi;
done; for arg in "$@";
do
if [[ "${arg}" == "--use_go_build" ]]; then
use_go_build=true;
else
if [[ "${arg}" == -* ]]; then
goflags+=("${arg}");
else
targets+=("${arg}");
fi;
fi;
done; if [[ ${#targets[@]} -eq 0 ]]; then
targets=("${KUBE_ALL_TARGETS[@]}");
fi; local -a platforms=(${KUBE_BUILD_PLATFORMS:-}); if [[ ${#platforms[@]} -eq 0 ]]; then
platforms=("${host_platform}");
fi; local binaries; binaries=($(kube::golang::binaries_from_targets "${targets[@]}")); local parallel=false; if [[ ${#platforms[@]} -gt 1 ]]; then
local gigs; gigs=$(kube::golang::get_physmem); if [[ ${gigs} -ge ${KUBE_PARALLEL_BUILD_MEMORY} ]]; then
kube::log::status "Multiple platforms requested and available ${gigs}G >= threshold ${KUBE_PARALLEL_BUILD_MEMORY}G, building platforms in parallel"; parallel=true;
else
kube::log::status "Multiple platforms requested, but available ${gigs}G < threshold ${KUBE_PARALLEL_BUILD_MEMORY}G, building platforms in serial"; parallel=false;
fi;
fi; kube::golang::build_kube_toolchain; if [[ "${parallel}" == "true" ]]; then
kube::log::status "Building go targets for ${platforms[@]} in parallel (output will appear in a burst when complete):" "${targets[@]}"; local platform; for platform in "${platforms[@]}";
do
( kube::golang::set_platform_envs "${platform}"; kube::log::status "${platform}: go build started"; kube::golang::build_binaries_for_platform ${platform} ${use_go_build:-}; kube::log::status "${platform}: go build finished" ) &> "/tmp//${platform//\//_}.build" &
done; local fails=0; for job in $(jobs -p);
do
wait ${job} || let "fails+=1";
done; for platform in "${platforms[@]}";
do
cat "/tmp//${platform//\//_}.build";
done; exit ${fails};
else
for platform in "${platforms[@]}";
do
kube::log::status "Building go targets for ${platform}:" "${targets[@]}"; kube::golang::set_platform_envs "${platform}"; kube::golang::build_binaries_for_platform ${platform} ${use_go_build:-};
done;
fi )' exited with status 1
Call stack:
1: /usr/local/google/home/stclair/go/k8s3/src/k8s.io/kubernetes/hack/lib/golang.sh:596 kube::golang::build_binaries(...)
2: hack/make-rules/build.sh:27 main(...)
Exiting with status 1
make: *** [kubelet] Error 1
```
</details>
Remaining work: Add a verbosity label to more log messages.
/cc @kubernetes/sig-api-machinery @kubernetes/contributor-experience
Automatic merge from submit-queue
AWS/GCE: Rework use of master name
* Add a pillar for `hostname` (because even if there's a good Salt function for it, I don't trust it to return the short hostname)
* Move `INITIAL_ETCD_CLUSTER` to just the GCE turn-up
* Remove `master_name`, which isn't needed
The KUBE_VERBOSE environment variable sets the verbosity level to
use. Log messages can specify a verbosity by setting the V
variable. e.g.
V=2 kube::log::info foo bar
Would only print "foo bar" if $KUBE_VERBOSE >= 2.
* Add a pillar for hostname (because even if there's a good Salt
function for it, I don't trust it to return the short hostname)
* Move INITIAL_ETCD_CLUSTER to just the GCE turn-up
* Remove the master_name, which isn't needed as a pillar
Automatic merge from submit-queue
Replacing skydns with kubedns for the juju cluster. #29720
```release-note
* Updating the cluster/juju provider to use kubedns in place of skydns.
```
Automatic merge from submit-queue
In cluster scripts correct gcloud list arg from '--zone' to '--zones'
I started getting these messages when doing `kube-up` and similar operations:
WARNING: Abbreviated flag [--zone] will be disabled in release 132.0.0, use the full name [--zones].
This PR corrects the flag where used.
Note there are many uses of `--zone` on commands like `gcloud instances describe` which are still correct - those commands do not accept multiple zones.
Automatic merge from submit-queue
Documented second arg to create-flanneld-opts in cluster/ubuntu/util.sh
This is a bug fix, no release note needed.
Fixes#29546
Automatic merge from submit-queue
GKE test-build-release: Actually do the build.
Multiple devs (myself included!) have experienced frustration with the fact that if `KUBERNETES_PROVIDER=gke` then `hack/e2e.go --build` doesn't actually do a build.
Are we actually relying on this behavior anywhere?
Automatic merge from submit-queue
[Garbage Collector] add e2e tests again
#27151 is reverted because gke didn't start correctly after it's merged (https://github.com/kubernetes/kubernetes/pull/27151#issuecomment-233030686).
The possible problem is the `unbound variable`, which is fixed in the second commit of this PR. However, I cannot verify if the PR will fail the gke suite since I don't have the environment to run that suite.
@wojtek-t @lavalamp
Automatic merge from submit-queue
azure: kube-up respects AZURE_RESOURCE_GROUP
This fixes#28482.
* declare AZKUBE_ variables as global to workaround lack of bash support for exporting array variables
Automatic merge from submit-queue
cluster/images/hyperkube: re-add hyperkube busybox style symlinks
Originally symlinks were added with a `--make-symlinks` command discussed in https://github.com/kubernetes/kubernetes/issues/24510 and implemented in https://github.com/kubernetes/kubernetes/pull/24511.
It was backed out in https://github.com/kubernetes/kubernetes/pull/25693 because go binaries don't run in qemu and this breaks cross-building the Dockerfile for arm. In this case, due to running `hyperkube --make-symlinks`.
Lets just add the symlinks manually until the upstream bug is fixed (qemu).
fixes#28702
@mikedanese @thockin @yifan-gu @euank
Automatic merge from submit-queue
Updated fluentd configuration to spawn multiple threads for processing
(by default, fluentd uses a single thread).
@a-robinson @igorpeshansky
Automatic merge from submit-queue
Bump exechealthz image
With the new image at least if we observe an exec container taking more ram than it should (like the oom situation, which shouldn't happen today because of the increased limits), we can kubectl exec and check the pprof endpoints.
Note that I'm not bumping the rc version, because I just did so with: https://github.com/kubernetes/kubernetes/pull/29693.
Automatic merge from submit-queue
Give healthz more memory to mitigate #29688
This will recreate the rc but not the pods. At least on the clusters we patched, if the pods get recreated they'll ccome back up with the updated limits.
#29688
Automatic merge from submit-queue
export KUBE_USER to salt (support custom usernames) for vagrant, vsph…
GCE/GKE were handled in #29164, AWS was handled in #29428. This should cover the rest of the configurations that use ABAC.
Automatic merge from submit-queue
kube-up: increase download timeout for kubernetes.tar.gz
Particularly on smaller instances on AWS, we were hitting the 80 second
timeout now that our image is well over the 1GB mark.
Increase the timeout from 80 seconds to 300 seconds.
Fix#29418
Automatic merge from submit-queue
Include CNI for all architectures in the hyperkube image
Can some of you (@jfrazelle @mikedanese) quickly lgtm this?
I'd like it if we got it merged before v1.4.0-alpha.2
It's not a huge change, I'm just cross-compiling this CNI stuff while waiting for the v0.4.0 which likely will release binaries for all arches.
Automatic merge from submit-queue
AWS kube-up: fix MASTER_OS_DISTRIBUTION
On AWS we were defining KUBE_MASTER_OS_DISTRIBUTION, but the scripts
expect MASTER_OS_DISTRIBUTION.
Fixes#29422
Particularly on smaller instances on AWS, we were hitting the 80 second
timeout now that our image is well over the 1GB mark.
Increase the timeout from 80 seconds to 300 seconds.
Fix#29418
Automatic merge from submit-queue
Add load balancer in front of apiserver in HA master setup
The first commit is just https://github.com/kubernetes/kubernetes/pull/29201 and has been already LGTMed.
Second commit has some small fixes:
1. Precompute REGION variable in config
2. Add timeout for waiting for loadbalancer
3. Fix kube-down so that it doesn't delete some resources if there are still masters/nodes in other zones
Second commit also fixes bug in https://github.com/kubernetes/kubernetes/pull/29201 where variable `REGION` was unset in `kube-down` when deleting master IP. The bug caused leaking of IP addresses.
https://github.com/kubernetes/kubernetes/issues/21124
@davidopp @jszczepkowski @wojtek-t @mikedanese
Automatic merge from submit-queue
Bump the default etcd version in the Makefile to 3.0.3
Fixes: #29132
I haven't had time to manually validate the arm and arm64 version yet, but I think it should be fine.
cc @xiang90 @hongchaodeng @timothysc @lavalamp @wojtek-t @thockin @kubernetes/sig-scalability @Pensu @laboger
Automatic merge from submit-queue
Ubuntu: Enable ssh compression when downloading binaries during cluster creation
<!--
Checklist for submitting a Pull Request
Please remove this comment block before submitting.
1. Please read our [contributor guidelines](https://github.com/kubernetes/kubernetes/blob/master/CONTRIBUTING.md).
2. See our [developer guide](https://github.com/kubernetes/kubernetes/blob/master/docs/devel/development.md).
3. If you want this PR to automatically close an issue when it is merged,
add `fixes #<issue number>` or `fixes #<issue number>, fixes #<issue number>`
to close multiple issues (see: https://github.com/blog/1506-closing-issues-via-pull-requests).
4. Follow the instructions for [labeling and writing a release note for this PR](https://github.com/kubernetes/kubernetes/blob/master/docs/devel/pull-requests.md#release-notes) in the block below.
-->
resolves#20971 by using the options provided by ssh.
Native ssh compression has existed for years, and the server is free to disregard the setting, so this should be safe.
With things like the kube binaries I see about a 2x speed increase.
```
λ time scp kubes-bin.tar 9.30.182.251:/mnt/build/kubin
kubes-bin.tar 100% 344MB 10.7MB/s 00:32
real 0m32.284s
user 0m1.679s
sys 0m1.263s
λ time scp -C kubes-bin.tar 9.30.182.251:/mnt/build/kubin
kubes-bin.tar 100% 344MB 22.9MB/s 00:15
real 0m14.810s
user 0m12.858s
sys 0m0.994s
λ ls -lah kubes-bin.tar
-rw-r--r-- 1 mhb staff 344M Jun 2 15:29 kubes-bin.tar
λ tar -tf kubes-bin.tar
kubectl
master/
master/etcd
master/etcdctl
master/flanneld
master/kube-apiserver
master/kube-controller-manager
master/kube-scheduler
node/
node/flanneld
node/kube-proxy
node/kubelet
```
Automatic merge from submit-queue
fix logrotate config (again)
we need to add the dateformat option so that the logrotate
can create unique logfiles for each rotation. Without this,
logrotation is skipped with message like (generated in
verbose mode of logrotate):
rotating log /var/log/rotate-test.log, log->rotateCount is 5
dateext suffix '-20160718'
glob pattern '-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]'
destination /var/log/rotate-test2.log-20160718.gz already exists, skipping rotation
Tested as follows:
# config in '/etc/logrotate.d/rotate-test':
/var/log/rotate-test.log {
rotate 5
copytruncate
missingok
notifempty
compress
maxsize 100M
daily
dateext
dateformat -%Y%m%d-%s
create 0644 root root
}
# create 150Mb of /var/log/rotate-test.log
$ dd if=/dev/zero of=/var/log/rotate-test.log bs=1048576 count=150 conv=notrunc oflag=append
# run logrotate
$ /usr/sbin/logrotate -v /etc/logrotate.conf
...
rotating pattern: /var/log/rotate-test.log after 1 days (5 rotations)
empty log files are not rotated, log files >= 104857600 are rotated earlier, old logs are removed
considering log /var/log/rotate-test.log
log needs rotating
rotating log /var/log/rotate-test.log, log->rotateCount is 5
Converted ' -%Y%m%d-%s' -> '-%Y%m%d-%s'
dateext suffix '-20160718-1468875268'
glob pattern '-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]'
copying /var/log/rotate-test.log to /var/log/rotate-test.log-20160718-1468875268
truncating /var/log/rotate-test.log
compressing log with: /bin/gzip
Repeating 'dd' and 'logrotate' commands now generate logfiles correctly.
#27754
@bprashanth can you please review?
Automatic merge from submit-queue
hyperkube: fix build for 3rd party registry (again)
Fixes issue #28487
This is a minor fix for the issue reported in #28487
we need to add the dateformat option so that the logrotate
can create unique logfiles for each rotation. Without this,
we logrotation is skipped with message like (generated in
verbose mode of logrotate):
rotating log /var/log/rotate-test.log, log->rotateCount is 5
dateext suffix '-20160718'
glob pattern '-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]'
destination /var/log/rotate-test2.log-20160718.gz already exists, skipping rotation
Tested as follows:
# config in '/etc/logrotate.d/rotate-test':
/var/log/rotate-test.log {
rotate 5
copytruncate
missingok
notifempty
compress
maxsize 100M
daily
dateext
dateformat -%Y%m%d-%s
create 0644 root root
}
# create 150Mb of /var/log/rotate-test.log
$ dd if=/dev/zero of=/var/log/rotate-test.log bs=1048576 count=150 conv=notrunc oflag=append
# run logrotate
$ /usr/sbin/logrotate -v /etc/logrotate.conf
...
rotating pattern: /var/log/rotate-test.log after 1 days (5 rotations)
empty log files are not rotated, log files >= 104857600 are rotated earlier, old logs are removed
considering log /var/log/rotate-test.log
log needs rotating
rotating log /var/log/rotate-test.log, log->rotateCount is 5
Converted ' -%Y%m%d-%s' -> '-%Y%m%d-%s'
dateext suffix '-20160718-1468875268'
glob pattern '-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]'
copying /var/log/rotate-test.log to /var/log/rotate-test.log-20160718-1468875268
truncating /var/log/rotate-test.log
compressing log with: /bin/gzip
Repeating 'dd' and 'logrotate' commands now generate logfiles correctly.
Automatic merge from submit-queue
Unset KUBERNETES_PROVIDER when KUBERNETES_CONFORMANCE_TEST is set
fixes#26269
same as #26530 - i accidentally lost my fork and couldn't rebase there ;)
@mikedanese PTAL
Automatic merge from submit-queue
kube-up: install new Docker pre-requisite (libltdl7) when not in image
Docker now has a dependency on libltdl7; we have to specify it manually
if we are installing docker using dpkg (vs using apt-get or similar,
which would pull it in automatically)
Fixes#28644
This allows us to start building real dependencies into Makefile.
Leave old hack/* scripts in place but advise to use 'make'. There are a few
rules that call things like 'go run' or 'build/*' that I left as-is for now.
Docker now has a dependency on libltdl7; we have to specify it manually
if we are installing docker using dpkg (vs using apt-get or similar,
which would pull it in automatically)
Fixes#28644
Automatic merge from submit-queue
Fixes#28205, Check release tar location for Openstack-Heat provider
This does a basic check to see where the release tars are located.
Allows people to use openstack-heat outside of compiling k8s.
Automatic merge from submit-queue
Enable extensions/v1beta1/NetworkPolicy by default
Fixes https://github.com/kubernetes/kubernetes/issues/28401
For some reason this also triggered an update to the swagger spec (which apparently hadn't been done before but wasn't failing validation...)
Automatic merge from submit-queue
Implementing a proper master/worker split in the juju cluster code.
```
release-note-none
```
General updates to the cluster/juju Kubernetes provider, to bring it up to date.
Updating the skydns templates to version 11
Updating the etcd container definition to include arch.
Updating the master template to include arch and version for hyperkube container.
Adding dns_domain configuration options.
Adding storage layer options.
[]()
Automatic merge from submit-queue
Check existence of kubernetes dir for get-kube.sh
[]()
There are a lot of references to https://get.k8s.io/ over the internet.
Most of such references do not describe KUBERNETES_SKIP_DOWNLOAD env variable
and newbies can get into a situation described below:
- execute `wget -q -O - https://get.k8s.io | bash`
- receive a failure due too missed packages or some configs
- fix the issue
- try again `wget -q -O - https://get.k8s.io | bash`
In this case, get-kube.sh will not check that kubernetes directory already
exist and repeat download again.
Lets make get-kube.sh more user-friendly and check existence of kubernetes dir
Updating the skydns templates to version 11
Updating the etcd container definition to include arch.
Updating the master template to include arch and version for hyperkube container.
Adding dns_domain configuration options.
Adding storage layer options.
Fixing underscore problem and adding exceptions.
Fixing the underscore flag errors.
Automatic merge from submit-queue
Make GKE detect-instance-groups work on Mac.
Make the fix from #27803 also work on mac.
The GNU `expr` command supports both the `expr match STRING REGEXP` and `expr STRING : REGEXP` command syntax.
The BSD `expr` command only has the `expr STRING : REGEXP` syntax.
@fabioy @a-robinson
Automatic merge from submit-queue
Bump skydns godeps to latest
Update Godeps for github.com/skynetservices/skydns and miekg/dns.
Bump kubedns version to 1.6 with latest skynetservices/skydns code
Built kube-dns for all architectures and pushed containers to gcr.io.
Automatic merge from submit-queue
Enhance kubedns pod health checks to cover kubedns container
The existing health check hits port 53, the dnsmasq container, with the same domain name every time. Since dnsmasq looks up and caches results from the kubedns container, running on port 10053, the health check is not covering the kubedns container after the first query (and once every TTL expiration).
This PR enhances the health check to directly hit port 10053 (kubedns) in addition to port 53.
Automatic merge from submit-queue
Substitute federation_domain_map parameter with its value in node bootstrap scripts.
This PR also removes the substitution code we added to the build scripts.
**Release Note**
```release-note
If you use one of the kube-dns replication controller manifest in `cluster/saltbase/salt/kube-dns`, i.e. `cluster/saltbase/salt/kube-dns/{skydns-rc.yaml.base,skydns-rc.yaml.in}`, either substitute one of `__PILLAR__FEDERATIONS__DOMAIN__MAP__` or `{{ pillar['federations_domain_map'] }}` with the corresponding federation name to domain name value or remove them if you do not support cluster federation at this time. If you plan to substitute the parameter with its value, here is an example for `{{ pillar['federations_domain_map'] }`
pillar['federations_domain_map'] = "- --federations=myfederation=federation.test"
where `myfederation` is the name of the federation and `federation.test` is the domain name registered for the federation.
```
cc @erictune @kubernetes/sig-cluster-federation @MikeSpreitzer @luxas
[]()
Automatic merge from submit-queue
Remove duplicated nginx image. Use nginx-slim instead
This PR removes the image `gcr.io/google_containers/nginx:1.7.9` and uses `gcr.io/google_containers/nginx-slim:0.7`.
Besides removing the duplication `1.7.9` is 16 months old.
bprashanth
