Use same kubelet-preferred-address-types setting as RKE2 to improve reliability of the egress selector when using a HTTP proxy. Also, use BindAddressOrLoopback to ensure that the correct supervisor address is used when --bind-address is set.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* Move startup hooks wg into a runtime pointer, check before notifying systemd
* Switch default systemd notification to server
* Add 1 sec delay to allow etcd to write to disk
Signed-off-by: Derek Nola <derek.nola@suse.com>
The control-plane context handles requests outside the cluster and
should not be sent to the proxy.
In agent mode, we don't watch pods and just direct-dial any request for
a non-node address, which is the original behavior.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Watching pods appears to be the most reliable way to ensure that the
proxy routes and authorizes connections.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
This reverts commit aa9065749c.
Setting dual-stack node-ip does not work when --cloud-provider is set
to anything, including 'external'. Just set node-ip to the first IP, and
let the cloud provider add the other address.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
The cloud-provider arg is deprecated and cannot be set to anything other than external, but must still be used or node addresses are not set properly.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Reduces code complexity a bit and ensures we don't have to handle closed watch channels on our own
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Before this change, kube-router was always assuming that IPv4 is
enabled, which is not the case in IPv6-only clusters. To enable network
policies in IPv6-only, we need to explicitly let kube-router know when
to disable IPv4.
Signed-off-by: Michal Rostecki <vadorovsky@gmail.com>
* Bump etcd to v3.5.4-k3s1
* Fix issue with datastore corruption on cluster-reset
* Disable unnecessary components during cluster reset
Disable control-plane components and the tunnel setup during
cluster-reset, even when not doing a restore. This reduces the amount of
log clutter during cluster reset/restore, making any errors encountered
more obvious.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Problem:
Specifying extra arguments for the API server for example is not supported as
the arguments get stored in a map before being passed to the API server.
Solution:
Updated the GetArgs function to store the arguments in a map that can have
multiple values. Some more logic is added so that repeated extra arguments
retain their order when sorted whilst overall the arguments can still be
sorted for improved readability when logged.
Support has been added for prefixing and suffixing default argument values
by using -= and += when specifying extra arguments.
Signed-off-by: Terry Cain <terry@terrys-home.co.uk>
This is required to make the websocket tunnel server functional on
etcd-only nodes, and will save some code on the RKE2 side once pulled
through.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Closing idle connections isn't guaranteed to close out a pooled connection to a
loadbalancer endpoint that has been removed. Instead, ensure that requests used
to wait for the apiserver to become ready aren't reused.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Reuse the existing etcd library code to start up the temporary etcd
server for bootstrap reconcile. This allows us to do proper
health-checking of the datastore on startup, including handling of
alarms.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Several types contained redundant references to ControlRuntime data. Switch to consistently accessing this via config.Runtime instead.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* Regular CLI framework for encrypt commands
* New secrets-encryption feature
* New integration test
* fixes for flaky integration test CI
* Fix to bootstrap on restart of existing nodes
* Consolidate event recorder
Signed-off-by: Derek Nola <derek.nola@suse.com>
* Add etcd extra args support for K3s
Signed-off-by: Chris Kim <oats87g@gmail.com>
* Add etcd custom argument integration test
Signed-off-by: Chris Kim <oats87g@gmail.com>
* go generate
Signed-off-by: Chris Kim <oats87g@gmail.com>
Since we now start the server's agent sooner and in the background, we
may need to wait longer than 30 seconds for the apiserver to become
ready on downstream projects such as RKE2.
Since this essentially just serves as an analogue for the server's
apiReady channel, there's little danger in setting it to something
relatively high.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* Make sure there are no duplicates in etcd member list
Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>
* fix node names with hyphens
Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>
* use full server name for etcd node name
Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>
Works around issue with Job controller not tracking job pods that
are in CrashloopBackoff during upgrade from 1.21 to 1.22.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Also honor node-ip when adding the node address to the SAN list, instead
of hardcoding the autodetected IP address.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Required to support apiextensions.v1 as v1beta1 has been deleted. Also
update helm-controller and dynamiclistener to track wrangler versions.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Updated the logic to handle if extra args are passed with existing hyphens in the arg. The test was updated to add the additional case of having pre-existing hyphens. The method name was also refactored based on previous feedback.
* Commit of new etcd snapshot integration tests.
* Updated integration github action to not run on doc changes.
* Update Drone runner to only run unit tests
Signed-off-by: dereknola <derek.nola@suse.com>
This changes the crictl template for issues with the socket information. It also addresses a typo in the socket address. Last it makes tweaks to configuration that aren't required or had incorrect logic.
Signed-off-by: Jamie Phillips <jamie.phillips@suse.com>
spelling
* Move cloud-controller-manager into an embedded executor
* Import K3s cloud provider and clean up imports
Signed-off-by: Chris Kim <oats87g@gmail.com>
the server's built-in helm controller.
Problem:
Testing installation and uninstallation of the Helm Controller on k3s is
not possible if the Helm Controller is baked into the k3s server.
Solution:
The Helm Controller can optionally be disabled, which will allow users
to manage its installation manually.
Signed-off-by: Joe Kralicky <joe.kralicky@suse.com>
* Changed cloud-controller-manager user name in ccm.yaml
Signed-off-by: dereknola <derek.nola@suse.com>
* Changed RBAC name in server.go
Signed-off-by: dereknola <derek.nola@suse.com>
* Changed "k3s" string prefix to version.Program to prevent static hardcoding
Signed-off-by: dereknola <derek.nola@suse.com>
* Changed user in ccm.yaml to k3s-cloud-controller-manager
Signed-off-by: dereknola <derek.nola@suse.com>
* Move registries.yaml handling out to rancher/wharfie
* Add system-default-registry support
* Add CLI support for kubelet image credential providers
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Problem:
Only the client CA is passed to the kube-controller-manager and
therefore CSRs with the signer name "kubernetes.io/kubelet-serving" are
signed with the client CA. Serving certificates must be signed with the
server CA otherwise e.g. "kubectl logs" fails with the error message
"x509: certificate signed by unknown authority".
Solution:
Instead of providing only one CA via the kube-controller-manager
parameter "--cluster-signing-cert-file", the corresponding CA for every
signer is set with the parameters
"--cluster-signing-kube-apiserver-client-cert-file",
"--cluster-signing-kubelet-client-cert-file",
"--cluster-signing-kubelet-serving-cert-file", and
"--cluster-signing-legacy-unknown-cert-file".
Signed-off-by: Siegfried Weber <mail@siegfriedweber.net>
The kube-apiserver cert should have the same SANs in the same order,
excluding the extra user-configured SANs since this will only be used
in-cluster.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* Update Kubernetes to v1.21.0
* Update to golang v1.16.2
* Update dependent modules to track with upstream
* Switch to upstream flannel
* Track changes to upstream cloud-controller-manager and FeatureGates
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Now rootless mode can be used with cgroup v2 resource limitations.
A pod is executed in a cgroup like "/user.slice/user-1001.slice/user@1001.service/k3s-rootless.service/kubepods/podd0eb6921-c81a-4214-b36c-d3b9bb212fac/63b5a253a1fd4627da16bfce9bec58d72144cf30fe833e0ca9a6d60ebf837475".
This is accomplished by running `kubelet` in a cgroup namespace, and enabling `cgroupfs` driver for the cgroup hierarchy delegated by systemd.
To enable cgroup v2 resource limitation, `k3s server --rootless` needs to be launched as `systemctl --user` service.
Please see the comment lines in `k3s-rootless.service` for the usage.
Running `k3s server --rootless` via a terminal is not supported.
When it really needs to be launched via a terminal, `systemd-run --user -p Delegate --tty` needs to be prepended to create a systemd scope.
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
* Add functionality for etcd snapshot/restore to and from S3 compatible backends.
* Update etcd restore functionality to extract and write certificates and configs from snapshot.
Adds support for retagging images to appear to have been sourced from
one or more additional registries as they are imported from the tarball.
This is intended to support RKE2 use cases with system-default-registry
where the images need to appear to have been pulled from a registry
other than docker.io.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Fix issue 900
cgroup2 support was introduced in PR 2584, but got broken in f3de60ff31
It was failing with "F1210 19:13:37.305388 4955 server.go:181] cannot set feature gate SupportPodPidsLimit to false, feature is locked to true"
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
We're not setting ``--service-account-issuer` to a https URL, which causes an
error message at startup when the feature gate is enabled. From the
docs on that flag:
> If this option is not a valid URI per the OpenID Discovery 1.0 spec, the
> ServiceAccountIssuerDiscovery feature will remain disabled, even if the
> feature gate is set to true. It is highly recommended that this value
> comply with the OpenID spec:
> https://openid.net/specs/openid-connect-discovery-1_0.html. In practice,
> this means that service-account-issuer must be an https URL. It is also
> highly recommended that this URL be capable of serving OpenID discovery
> documents at {service-account-issuer}/.well-known/openid-configuration.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
As per documentation, the cloud-provider flag should not be passed to
controller-manager when using cloud-controller. However, the legacy
cloud-related controllers still need to be explicitly disabled to
prevent errors from being logged.
Fixing this also prevents controller-manager from creating the
cloud-controller-manager service account that needed extra RBAC.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Resolves warning 2 from #2471.
As per https://github.com/kubernetes/cloud-provider/issues/12 the
ClusterID requirement was never really followed through on, so the
flag is probably going to be removed in the future.
One side-effect of this is that the core k8s cloud-controller-manager
also wants to watch nodes, and needs RBAC to do so.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* Set etcd timeouts using values from k8s instead of etcdctl
Fix for one of the warnings from #2303
* Use etcd zap logger instead of deprecated capsnlog
Fix for one of the warnings from #2303
* Remove member self-promotion code paths
* Add learner promotion tracking code
* Fix RaftAppliedIndex progress check
* Remove ErrGRPCKeyNotFound check
This is not used by v3 API - it just returns a response with 0 KVs.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Since we're replacing the k3s rolebindings.yaml in rke2, we should allow
renaming this so that we can use the white-labeled name downstream.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* cli: add --selinux flag to agent/server sub-cmds
Introduces --selinux flag to affirmatively enable SELinux in containerd.
Deprecates --disable-selinux flag which now defaults to true which
auto-detection of SELinux configuration for containerd is no longer
supported. Specifying both --selinux and --disable-selinux will result
in an error message encouraging you to pick a side.
* Update pkg/agent/containerd/containerd.go
update log warning message about enabled selinux host but disabled runtime
Co-authored-by: Brad Davidson <brad@oatmail.org>
Signed-off-by: Jacob Blain Christen <jacob@rancher.com>
Before this change, k3s configured the scheduler and controller's
insecure ports to listen on 0.0.0.0. Those ports include pprof, which
provides a DoS vector at the very least.
These ports are only enabled for componentstatus checks in the first
place, and componentstatus is hardcoded to only do the check on
localhost anyway (see
https://github.com/kubernetes/kubernetes/blob/v1.18.2/pkg/registry/core/rest/storage_core.go#L341-L344),
so there shouldn't be any downside to switching them to listen only on
localhost.
Brad Davidson