Automatic merge from submit-queue (batch tested with PRs 36310, 37349, 38319, 38402, 38338)
add summarizing discovery controller and handlers
Requires https://github.com/kubernetes/kubernetes/pull/38304 .
This adds discovery support to the new `kubernetes-discovery` that runs based on a controller wired up to the `APIService.apiregistration.k8s.io`. It also adds in plumbing for `local-up-cluster.sh` to register the "normal" kube resources.
@kubernetes/sig-api-machinery
@sttts
Automatic merge from submit-queue
[Federation] Make federation etcd PVC size configurable
This one implements one of the many TODO items pending in the previous set of kubefed PRs.
The design doc PR is at https://github.com/kubernetes/kubernetes/pull/34484
cc @kubernetes/sig-cluster-federation @madhusudancs
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```
[Federation] kubefed init now has a new flag, --etcd-pv-capacity, which can be used to configure the persistent volume capacity for etcd.
```
Automatic merge from submit-queue
kubedns: use initial resource listing as ready signal
Fix#35140.
Set up the ready signal after the first resource listing finished for both endpoints and services instead of listen on kubernetes service.
@bprashanth @bowei @thockin
**Release note**:
```
```
Automatic merge from submit-queue
Fix local-cluster-up on Mac and discovery on all systems
- use cfssl on the host, not from Docker. Solves a number of permission problem with selinux and Mac
- fix discovery startup
Automatic merge from submit-queue (batch tested with PRs 38260, 32811, 28458, 33570, 37096)
Fix support for DNS in local-up-cluster.sh
[]()
The default appears to be gce now, so this tries to spawn a service in
gce... not the desired outcome for a local test setup.
We also need to sync the kubectl config in the script with the instructions for users, since if people don't test with DNS enabled, it bitrots (which this aims to fix).
To test manually, run something like
```
sudo KUBE_ENABLE_CLUSTER_DNS=true API_HOST_IP=0.0.0.0 ./hack/local-up-cluster.sh
```
The API_HOST_IP=0.0.0.0 is required, otherwise the master is not contactable by kubedns, and the dns pod will fail readychecking on the healthz pod.
Automatic merge from submit-queue (batch tested with PRs 38318, 38258)
kernel memcg notification enabled via experimental flag
Kubelet integrates with kernel memcg notification API if and only if enabled via experimental flag.
Automatic merge from submit-queue (batch tested with PRs 36543, 38189, 38289, 38291, 36724)
add authentication/authorization to kubernetes-discovery
Wires authentication and authorization into `kubernetes-discovery` and re-enables the `local-up-cluster.sh` along with proper permission granting for RBAC cases.
@sttts @liggitt
Automatic merge from submit-queue (batch tested with PRs 35101, 38215, 38092)
fix informer generation
Informer generation doesn't work for informers from a different clientset. This updates the generator to generate the internal interfaces required to break the cycle.
@ncdc take a look at the last two commits.
Automatic merge from submit-queue
Disable kubernetes-discovery in local-up-cluster.sh
fix#38257
Fixes local-up-cluster until kubernetes-discovery flags are hooked up
Automatic merge from submit-queue
update local-up-cluster to allow full authentication proxying
Adds group and header information in auth proxy authenticator options for `local-up-cluster.sh`. Must have been missed in the rebase madness.
Automatic merge from submit-queue (batch tested with PRs 38173, 38151, 38197, 38221)
Include resource type headers in diff report
**What this PR does / why we need it**: when checking for leaked resources, we report a failure only if there were additions to the diff - we don't want resources that were deleted during the run to count as a failure.
The logic for this removes the resource type headers from the diff report, however, so it's harder to understand what leaked.
For example, in https://k8s-gubernator.appspot.com/build/kubernetes-jenkins/logs/ci-kubernetes-e2e-gke-alpha-features-release-1.5/196/, the test failure shows
```
Error: 4 leaked resources
+NAME REGION IP_ADDRESS IP_PROTOCOL TARGET
+a66878dbaad1f11e695b342010af0002 us-central1 104.198.182.83 TCP us-central1/targetPools/a66878dbaad1f11e695b342010af0002
+NAME REGION SESSION_AFFINITY BACKUP HEALTH_CHECKS
+a66878dbaad1f11e695b342010af0002 us-central1 a66878dbaad1f11e695b342010af0002
```
but the [actual diff](https://storage.googleapis.com/kubernetes-jenkins/logs/ci-kubernetes-e2e-gke-alpha-features-release-1.5/196/artifacts/gcp-resources-diff.txt) contains more information:
```
--- /workspace/_artifacts/gcp-resources-before.txt 2016-12-01 14:39:14.260049037 -0800
+++ /workspace/_artifacts/gcp-resources-after.txt 2016-12-01 14:39:14.260049037 -0800
@@ -34,8 +34 @@ [ addresses ]
-NAME REGION ADDRESS STATUS
-a03d0e020a6bc11e6855f42010af0001 us-central1 104.197.135.88 RESERVED
-a23f20a47a6a011e6829a42010af0004 us-central1 104.197.147.212 RESERVED
-a32291b51a5e611e6b73342010af0002 us-central1 104.198.171.178 RESERVED
-a3c93cf79a65811e6b7c242010af0001 us-central1 104.198.58.57 RESERVED
-a9ac5bd1ba62811e68d1142010af0004 us-central1 104.154.134.135 RESERVED
-adae4c1a7a69511e6b2df42010af0000 us-central1 104.198.182.83 RESERVED
-adb4a80caa60311e689a942010af0001 us-central1 104.154.116.195 RESERVED
+
@@ -64 +57,2 @@ [ forwarding-rules ]
-
+NAME REGION IP_ADDRESS IP_PROTOCOL TARGET
+a66878dbaad1f11e695b342010af0002 us-central1 104.198.182.83 TCP us-central1/targetPools/a66878dbaad1f11e695b342010af0002
@@ -68 +62,2 @@ [ target-pools ]
-
+NAME REGION SESSION_AFFINITY BACKUP HEALTH_CHECKS
+a66878dbaad1f11e695b342010af0002 us-central1 a66878dbaad1f11e695b342010af0002
```
This PR will include the `[ type header ]`s in the report if resources are leaked.
cc @fejta
Automatic merge from submit-queue
add a configuration for kubelet to register as a node with taints
and deprecate --register-schedulable
ref #28687#29178
cc @dchen1107 @davidopp @roberthbailey
Automatic merge from submit-queue (batch tested with PRs 36990, 37494, 38152, 37561, 38136)
join client CA bundles
Last commit grabs client CA bundles from disparate parts of the auth config and makes a pool that contains all of them.
I suspect a rebase broke this because of ordering. I'll keep these separate to make it easier for me to debug.
Automatic merge from submit-queue (batch tested with PRs 36990, 37494, 38152, 37561, 38136)
api federation types
First commit adds types that can back the kubernetes-discovery server with an `kubectl` compatible way of adding federated servers. Second commit is just generated code.
After we have types, I'd like to start splitting `kubernetes-discovery` into a "legacy" mode which will support what we have today and a "normal" mode which will provide an API federation server like this: https://github.com/kubernetes/kubernetes/blob/master/docs/proposals/federated-api-servers.md that includes both discovery and proxy in a single server. Something like this: https://github.com/openshift/kube-aggregator .
@kubernetes/sig-api-machinery @nikhiljindal
Automatic merge from submit-queue
Add "make help" to list all make targets and help info
As discussed in [PR#29320comment](https://github.com/kubernetes/kubernetes/pull/29320#issuecomment-234420145), add a `make help` to make the use of `make` easy. Though it works well on my Ubuntu now (see the output as below, not sure if it still works on other systems), I believe the scripts are somewhat ugly, so, any suggestion for optimization is welcome.
BTW, I intended to list targets by groups, but it's hard to do that automatically. So I just list them in alphabetical order. I think this may be enough.
There are still some TODOs (also mentioned in the Makefile):
1. make EXCLUDE_TARGET auto-generated when there are other files in cmd/
2. should we exclude the target "cmd/libs" but include "cmd/libs/go2idl/*"?
3. should we let `help` be the first/default target? It will show the help when we just type `make`.
1 and 2 are to exclude the invalid targets generated by `$(notdir $(abspath $(wildcard cmd/*/)))`:
- OWNERS is just a file, it can't be a target
- libs itself cannot be built
/cc @thockin @jfrazelle @MHBauer @dims
Output:
```
root@vm:/home/paas/zxp/code/k8s/fork/kubernetes# make help
--------------------------------------------------------------------------------
all
# Build code.
#
# Args:
# WHAT: Directory names to build. If any of these directories has a 'main'
# package, the build will produce executable files under _output/go/bin.
# If not specified, "everything" will be built.
# GOFLAGS: Extra flags to pass to 'go' when building.
# GOLDFLAGS: Extra linking flags passed to 'go' when building.
# GOGCFLAGS: Additional go compile flags passed to 'go' when building.
#
# Example:
# make
# make all
# make all WHAT=cmd/kubelet GOFLAGS=-v
# make all GOGCFLAGS="-N -l"
# Note: Use the -N -l options to disable compiler optimizations an inlining.
# Using these build options allows you to subsequently use source
# debugging tools like delve.
---------------------------------------------------------------------------------
check
# Build and run tests.
#
# Args:
# WHAT: Directory names to test. All *_test.go files under these
# directories will be run. If not specified, "everything" will be tested.
# TESTS: Same as WHAT.
# GOFLAGS: Extra flags to pass to 'go' when building.
# GOLDFLAGS: Extra linking flags to pass to 'go' when building.
# GOGCFLAGS: Additional go compile flags passed to 'go' when building.
#
# Example:
# make check
# make test
# make check WHAT=pkg/kubelet GOFLAGS=-v
---------------------------------------------------------------------------------
clean
# Remove all build artifacts.
#
# Example:
# make clean
#
# TODO(thockin): call clean_generated when we stop committing generated code.
---------------------------------------------------------------------------------
clean_generated
# Remove all auto-generated artifacts.
#
# Example:
# make clean_generated
---------------------------------------------------------------------------------
clean_meta
# Remove make-related metadata files.
#
# Example:
# make clean_meta
---------------------------------------------------------------------------------
cross
# Cross-compile for all platforms
#
# Example:
# make cross
---------------------------------------------------------------------------------
federation-apiserver
federation-controller-manager
genfeddocs
# Add rules for all directories in federation/cmd/
#
# Example:
# make federation-apiserver federation-controller-manager
---------------------------------------------------------------------------------
gendocs
genkubedocs
genman
genswaggertypedocs
genutils
genyaml
hyperkube
kube-apiserver
kube-controller-manager
kubectl
kube-dns
kubelet
kubemark
kube-proxy
kubernetes-discovery
libs
linkcheck
mungedocs
# Add rules for all directories in cmd/
#
# Example:
# make kubectl kube-proxy
---------------------------------------------------------------------------------
generated_files
# Produce auto-generated files needed for the build.
#
# Example:
# make generated_files
---------------------------------------------------------------------------------
ginkgo
# Build ginkgo
#
# Example:
# make ginkgo
---------------------------------------------------------------------------------
help
# Print make targets and help info
#
# Example:
# make help
---------------------------------------------------------------------------------
quick-release
# Build a release, but skip tests
#
# Example:
# make release-skip-tests
---------------------------------------------------------------------------------
release
# Build a release
#
# Example:
# make release
---------------------------------------------------------------------------------
release-skip-tests
# Build a release, but skip tests
#
# Example:
# make release-skip-tests
---------------------------------------------------------------------------------
test
# Build and run tests.
#
# Args:
# WHAT: Directory names to test. All *_test.go files under these
# directories will be run. If not specified, "everything" will be tested.
# TESTS: Same as WHAT.
# GOFLAGS: Extra flags to pass to 'go' when building.
# GOLDFLAGS: Extra linking flags to pass to 'go' when building.
# GOGCFLAGS: Additional go compile flags passed to 'go' when building.
#
# Example:
# make check
# make test
# make check WHAT=pkg/kubelet GOFLAGS=-v
---------------------------------------------------------------------------------
test-cmd
# Build and run cmdline tests.
#
# Example:
# make test-cmd
---------------------------------------------------------------------------------
test-e2e
# Build and run end-to-end tests.
#
# Example:
# make test-e2e
---------------------------------------------------------------------------------
test-e2e-node
# Build and run node end-to-end tests.
#
# Args:
# FOCUS: Regexp that matches the tests to be run. Defaults to "".
# SKIP: Regexp that matches the tests that needs to be skipped. Defaults
# to "".
# RUN_UNTIL_FAILURE: If true, pass --untilItFails to ginkgo so tests are run
# repeatedly until they fail. Defaults to false.
# REMOTE: If true, run the tests on a remote host instance on GCE. Defaults
# to false.
# IMAGES: For REMOTE=true only. Comma delimited list of images for creating
# remote hosts to run tests against. Defaults to a recent image.
# LIST_IMAGES: If true, don't run tests. Just output the list of available
# images for testing. Defaults to false.
# HOSTS: For REMOTE=true only. Comma delimited list of running gce hosts to
# run tests against. Defaults to "".
# DELETE_INSTANCES: For REMOTE=true only. Delete any instances created as
# part of this test run. Defaults to false.
# ARTIFACTS: For REMOTE=true only. Local directory to scp test artifacts into
# from the remote hosts. Defaults to ""/tmp/_artifacts".
# REPORT: For REMOTE=false only. Local directory to write juntil xml results
# to. Defaults to "/tmp/".
# CLEANUP: For REMOTE=true only. If false, do not stop processes or delete
# test files on remote hosts. Defaults to true.
# IMAGE_PROJECT: For REMOTE=true only. Project containing images provided to
# IMAGES. Defaults to "kubernetes-node-e2e-images".
# INSTANCE_PREFIX: For REMOTE=true only. Instances created from images will
# have the name "-". Defaults to "test".
# INSTANCE_METADATA: For REMOTE=true and running on GCE only.
#
# Example:
# make test-e2e-node FOCUS=Kubelet SKIP=container
# make test-e2e-node REMOTE=true DELETE_INSTANCES=true
# make test-e2e-node TEST_ARGS="--cgroups-per-qos=true"
# Build and run tests.
---------------------------------------------------------------------------------
test-integration
# Build and run integration tests.
#
# Example:
# make test-integration
---------------------------------------------------------------------------------
verify
# Runs all the presubmission verifications.
#
# Args:
# BRANCH: Branch to be passed to verify-godeps.sh script.
#
# Example:
# make verify
# make verify BRANCH=branch_x
---------------------------------------------------------------------------------
vet
# Run 'go vet'.
#
# Args:
# WHAT: Directory names to vet. All *.go files under these
# directories will be vetted. If not specified, "everything" will be
# vetted.
#
# Example:
# make vet
# make vet WHAT=pkg/kubelet
---------------------------------------------------------------------------------
```
Automatic merge from submit-queue (batch tested with PRs 38149, 38156, 38150)
Node E2E: Remove setup-node option
This PR removes `setup-node` option, because:
* It is misleading. `setup-node` doesn't really setup the node, test framework will only put current user into docker user group when it is specified.
* It is not necessary anymore. Because we always run node e2e test as root now, we don't need to do this anymore.
This is a minor cleanup preparing for my test framework refactoring work. Will send out the refactor PR later.
/cc @kubernetes/sig-node
Automatic merge from submit-queue (batch tested with PRs 38149, 38156, 38150)
Remove girishkalele from most places
@matchstick you might need to help here. I am doing this because the bot is trying to create an issue assigned to @girishkalele but it cannot be created as he is not a member of the org any longer.
Automatic merge from submit-queue (batch tested with PRs 37328, 38102, 37261, 31321, 38146)
Add federation-openapi-spec to update-all targets
As `make verify` runs all `hack/verify-*` scripts (with some exceptions), `update-all.sh` should be in sync. It is missing all the federation targets right now, but `verify-federation-openapi-spec.sh` exists. Hence, we add that.
@nikhiljindal @mbohlool what about the other federation update scripts?
Automatic merge from submit-queue (batch tested with PRs 38111, 38121)
Prevent SIGPIPE errors causing the version check line to fail
The way we use pipe in hack/lib/etcd.sh when processing the version command can lead to
141 failues on some systems. Using a prefix of tail can prevent this.
Fixes#38109
Automatic merge from submit-queue (batch tested with PRs 37208, 37446, 37420)
Move "-short" to KUBE_TEST_ARGS
fixes#37445
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```release-note
NONE
```
"-short" is a argument of "go test", it should be moved to
"KUBE_TEST_ARGS".
Automatic merge from submit-queue
Split inflight requests into read-only and mutating groups
cc @smarterclayton @lavalamp @caesarxuchao
```release-note
API server have two separate limits for read-only and mutating inflight requests.
```
Automatic merge from submit-queue (batch tested with PRs 36816, 37534)
Move pkg/api/unversioned to pkg/apis/meta/v1
This moves code from using pkg/api/unversioned to pkg/apis/meta/v1 with the `metav1` local package name.
Built on top of #37532 (the first three commits related to ExportOptions)
Part of #37530
Automatic merge from submit-queue
plumb in front proxy group header
Builds on https://github.com/kubernetes/kubernetes/pull/36662 and https://github.com/kubernetes/kubernetes/pull/36774, so only the last commit is unique.
This completes the plumbing for front proxy header information and makes it possible to add just the front proxy header authenticator.
WIP because I'm going to assess it in use downstream.
Automatic merge from submit-queue
kubectl top pod|node should handle when Heapster is somewhere else
OpenShift runs Heapster on HTTPS, which means `top node` and `top pod`
are broken because they hardcode 'http' as the scheme. Provide an
options struct allowing users to specify `--heapster-namespace`,
`--heapster-service`, `--heapster-scheme`, and `--heapster-port` to the
commands (leveraging the existing defaults).
@kubernetes/sig-metrics makes top a little more useful in other spots
Automatic merge from submit-queue (batch tested with PRs 35300, 36709, 37643, 37813, 37697)
Add generated informers
Add informer-gen and the informers it generates. We'll do follow-up PRs to convert everything currently using the hand-written informers to the generated ones.
TODO:
- [x] switch to `GroupVersionResource`
- [x] finish godoc
@deads2k @caesarxuchao @sttts @liggitt
Automatic merge from submit-queue (batch tested with PRs 37094, 37663, 37442, 37808, 37826)
Fix the PATH that install-etcd.sh tells you to use
After you run install-etcd.sh, it tells you:
etcd v3.0.14 installed. To use:
export PATH=${PATH}:/home/danw/rh/go/src/k8s.io/kubernetes/third_party/etcd
which doesn't work if you have an older etcd installed in /usr/bin:
danw@w541:kubernetes (master)> PATH=${PATH}:/home/danw/rh/go/src/k8s.io/kubernetes/third_party/etcd etcd --version
etcd Version: 2.2.5
You need to put the local etcd dir first in PATH, not last.
Automatic merge from submit-queue (batch tested with PRs 37094, 37663, 37442, 37808, 37826)
Moved gobindata, refactored ReadOrDie refs
**What this PR does / why we need it**: Having gobindata inside of test/e2e/framework prevents external projects from importing the framework. Moving it out and managing refs fixes this problem.
**Which issue this PR fixes**: fixes#37007
Automatic merge from submit-queue (batch tested with PRs 37997, 37939, 37990, 36700, 37258)
--export flag belongs to kubectl get, not kubectl
**What this PR does / why we need it**:
When running the kubectl via symlink to hyperkube, the ``--export`` flag is not delegated to `kubectl get` but to `kubectl` only. Ending with unrecognized flag.
This patch adds a package `pkg/client/unversioned/clientcmd/util` and
defines a `ParseTimeout` helper function for parsing time from a
user-defined string. This allows code re-use in other packages that
require the creation of a new restclient (and therefore must set the
`--global-timeout` flag value manually).
Automatic merge from submit-queue
Add optional timeout logic to e2e.go
ref https://github.com/kubernetes/test-infra/issues/1250
Add a --timeout=5 flag.
If unset this does not change behavior.
If set this first sends an interrupt signal and then 15m later starts terminating child processes.
Will test out this change in another PR using the .use_head_e2e trick
- Remaining spaghetti untangled
- Missed bazel update and a few hardcoded refs
- New instance of framework.ReadOrDie reference removed post rebase
- Resolve new clientset rebase
- Fixed e2e/generated BUILD dep
- A space
- Missed gobindata ref in golang.sh
Automatic merge from submit-queue
Add kubernetes-anywhere as a new e2e deployment option.
This change adds support for using `kubernetes-anywhere` as a deployment option for hack/e2e.go. This work is toward the larger goal of being able to run e2e tests against `kubeadm` clusters, which `kubernetes-anywhere` supports.
**Release note**:
```release-note
Add kubernetes-anywhere as a new e2e deployment option
```
The configuration in `getConfig()` comes mostly from the defaults in `kubernetes-anywhere`. In the future, we can add more plumbing to override them via CLI flags.
CC @mikedanese
Automatic merge from submit-queue
create service add create ExternalName service implementation
@kubernetes/kubectl create service add ExternalName support, refer #34731 for more detail.
```release-note
kubectl create service externalname
```
Automatic merge from submit-queue
Build vendored copy of go-bindata and use that in go generate step
**What this PR does / why we need it**: as the title says, uses the vendored version of `go-bindata` rather than expecting developers to `go get` it (when building outside docker).
**Which issue this PR fixes**: fixes#34067, partially addresses #36655
**Special notes for your reviewer**: we still call `go generate` far too many times:
```console
~/.../src/k8s.io/kubernetes $ which go-bindata
~/.../src/k8s.io/kubernetes $ make
+++ [1116 17:35:28] Building the toolchain targets:
k8s.io/kubernetes/hack/cmd/teststale
k8s.io/kubernetes/vendor/github.com/jteeuwen/go-bindata/go-bindata
+++ [1116 17:35:29] Generating bindata:
test/e2e/framework/gobindata_util.go
+++ [1116 17:35:30] Building go targets for linux/amd64:
cmd/libs/go2idl/deepcopy-gen
+++ [1116 17:35:35] Building the toolchain targets:
k8s.io/kubernetes/hack/cmd/teststale
k8s.io/kubernetes/vendor/github.com/jteeuwen/go-bindata/go-bindata
+++ [1116 17:35:35] Generating bindata:
test/e2e/framework/gobindata_util.go
+++ [1116 17:35:36] Building go targets for linux/amd64:
cmd/libs/go2idl/defaulter-gen
+++ [1116 17:35:41] Building the toolchain targets:
k8s.io/kubernetes/hack/cmd/teststale
k8s.io/kubernetes/vendor/github.com/jteeuwen/go-bindata/go-bindata
+++ [1116 17:35:41] Generating bindata:
test/e2e/framework/gobindata_util.go
+++ [1116 17:35:42] Building go targets for linux/amd64:
cmd/libs/go2idl/conversion-gen
+++ [1116 17:35:47] Building the toolchain targets:
k8s.io/kubernetes/hack/cmd/teststale
k8s.io/kubernetes/vendor/github.com/jteeuwen/go-bindata/go-bindata
+++ [1116 17:35:47] Generating bindata:
test/e2e/framework/gobindata_util.go
+++ [1116 17:35:48] Building go targets for linux/amd64:
cmd/libs/go2idl/openapi-gen
+++ [1116 17:35:56] Building the toolchain targets:
k8s.io/kubernetes/hack/cmd/teststale
k8s.io/kubernetes/vendor/github.com/jteeuwen/go-bindata/go-bindata
+++ [1116 17:35:56] Generating bindata:
test/e2e/framework/gobindata_util.go
```
Fixing that is a separate effort, though.
cc @sebgoa @ZhangBanger
Automatic merge from submit-queue
change prompt for enabling RBAC on local-up-cluster
run `ALLOW_ANY_TOKEN=true ENABLE_RBAC=true hack/local-up-cluster.sh`
Use "--token" instead of "--username/--password", so need to update the prompt
OpenShift runs Heapster on HTTPS, which means `top node` and `top pod`
are broken because they hardcode 'http' as the scheme. Provide an
options struct allowing users to specify `--heapster-namespace`,
`--heapster-service`, `--heapster-scheme`, and `--heapster-port` to the
commands (leveraging the existing defaults).
Automatic merge from submit-queue
Activate client certs in local-cluster-up.sh for RBAC
- set up client certs for each component in local-cluster-up.sh
Automatic merge from submit-queue
build: clean platform envs to prevent cross-contamination
**What this PR does / why we need it**: As I described in https://github.com/kubernetes/kubernetes/issues/37079#issuecomment-263733509, we are leaking platform compilation envs between build stages for different platforms in the non-parallel dockerized cross build. This PR uses a subshell for the non-parallel build, more closely matching the parallel build.
This also adds some logging, which had it existed previously, may have made the bug more immediately obvious.
**Which issue this PR fixes**: fixes#37079
cc @sebgoa @iTagir @saad-ali
Automatic merge from submit-queue
hack/e2e.go: Dump cluster logs in case of Up failure
**What this PR does / why we need it**: A failure in `Up` currently results in no attempt to grab cluster logs. This fixes that hole. (Sigh, a ton of holes for this diagnosis path.)
Automatic merge from submit-queue
Update Stateful Set example files for 1.5
1. Remove initialized annotation from statefulset examples
2. Update storage class annotation to beta in statefulset examples
3. Remove alpha limitation on PetSet in cassandra example
cc @erictune @foxish @kow3ns @enisoc @chrislovecnm @kubernetes/sig-apps
```release-note
NONE
```
Automatic merge from submit-queue
move parts of the mega generic run struct out
This splits the main `ServerRunOptions` into composeable pieces that are bindable separately and adds easy paths for composing servers to run delegating authentication and authorization.
@sttts @ncdc alright, I think this is as far as I need to go to make the composing servers reasonable to write. I'll try leaving it here
Automatic merge from submit-queue
Fix package aliases to follow golang convention
Some package aliases are not not align with golang convention https://blog.golang.org/package-names. This PR fixes them. Also adds a verify script and presubmit checks.
Fixes#35070.
cc/ @timstclair @Random-Liu
Automatic merge from submit-queue
When --grace-period=0 is provided, wait for deletion
The grace-period is automatically set to 1 unless --force is provided, and the client waits until the object is deleted.
This preserves backwards compatibility with 1.4 and earlier. It does not handle scenarios where the object is deleted and a new object is created with the same name because we don't have the initial object loaded (and that's a larger change for 1.5).
Fixes#37117 by relaxing the guarantees provided.
```release-note
When deleting an object with `--grace-period=0`, the client will begin a graceful deletion and wait until the resource is fully deleted. To force deletion, use the `--force` flag.
```
Automatic merge from submit-queue
Node Conformance Test: Final cleanup for node conformance test.
This PR fits node conformance test with recent change.
* Remove `--manifest-path` because the test will get kubelet configuration through `/configz` now. https://github.com/kubernetes/kubernetes/pull/36919
* Add `$TEST_ARGS` so that we can override arguments inside the container.
* Fix a bug in garbage_collector_test.go which will cause the framework tries to connect docker no matter running the test or not. @dashpole
* Add `${REGISTRY}/node-test:${VERSION}` for convenience.
* Bump up the image version to `0.2`. (the one released with v1.4 is `v0.1`)
I've run the test both with `run_test.sh` script and directly `docker run`. Both of them passed.
After this gets merged, I'll build and push the new test image.
@dchen1107
/cc @kubernetes/sig-node
Automatic merge from submit-queue
add wrapper to provide stderr on command errors
The go standard library doesn't include stderr in the error message, but in many cases it is present: https://golang.org/src/os/exec/exec.go#L389 . This adds a wrapper to display that information. I've added in it on spot where the kops test is having trouble. If it works well, we can add it elsewhere.
@wojtek-t ptal
Automatic merge from submit-queue
Node E2E: Fix remote node e2e focus.
Before, we use `'focus'` and `'skip'` in `hack/make-rules/test-e2e-node.sh`.
When we run `make test-e2e-node REMOTE=true FOCUS="Some Thing"`, it will eventually be translated to `-focus='Some Thing'` [here](https://github.com/kubernetes/kubernetes/blob/master/test/e2e_node/remote/remote.go#L284-L285).
However, golang `exec.Command` wraps each argument with single quote, the argument will become `'xx -focus='Some Thing' xx'`, and cause error because of the 2 layer single quote.
Automatic merge from submit-queue
skip test docker if we do not use docker as container runtime.
skip test docker if we do not use docker as container runtime.
Signed-off-by: Xianglin Gao <xlgao@zju.edu.cn>
Automatic merge from submit-queue
Removes shorthand flag -w from kubectl apply
Fixes#37342.
A shorthand flag `-w` was introduced as flag `--prune-whitelist` for kubectl apply two weeks ago. Turned out it is not what we should do. Removing this shorthand flag before 1.5 release to prevent further issues.
@ymqytw @pwittrock
The grace-period is automatically set to 1 unless --force is provided,
and the client waits until the object is deleted.
This preserves backwards compatibility with 1.4 and earlier. It does not
handle scenarios where the object is deleted and a new object is created
with the same name.
Automatic merge from submit-queue
Fixed e2e tests for HA master.
Set of fixes that allows HA master e2e tests to pass for removal/addition master replicas.
The summary of changes:
- fixed host name in etcd certs,
- added cluster validation after kube-down,
- fixed the number of master replicas in cluster validation,
- made MULTIZONE=true required for HA master deployments, ensured we correctly handle MULTIZONE=true when user wants to create HA master but not kubelets in multiple zones,
- extended verification of master replicas in HA master e2e tests.
- Fix unbound variables in hack/local-up-cluster.sh
- explicitly set KUBERNETES_PROVIDER in local-up-cluster.
The default appears to be gce now, so this tries to spawn a service
in gce... not the desired outcome for a local test setup.
- Remove stale creation of kube-system: the kube-system namespace is
built in these days.
- Pickup third party etcd automatically.
- Retab hack/local-up-cluster.sh for consistency
- Update hack-local-up's internal credentials to match the user
instructions we give (which work).
- Note the CA root requirement in local-up-cluster
- Fix a dangling comment in local-up-cluster
To test manually, run something like:
```sudo KUBE_ENABLE_CLUSTER_DNS+true API_HOST_IP=0.0.0.0
./hack/local-up-cluster.sh```
The API_HOST_IP=0.0.0.0 is required otherwise kubedns cannot contact
the master and the dns pod will fail readychecking on the healthz
container.
Automatic merge from submit-queue
[Federation][join-flags] Add flags for cluster context and secret names while joining clusters to federation.
Vast majority of cluster contexts are not RFC 1123 subdomains. Since
cluster and secret names for the API objects are derived from the
cluster context name, there is no way for users to join clusters
with such context names to federation, unless they modify the context
name in their kubeconfigs itself. That's a lot of inconvenience and
entirely goes against the goal and beats the purpose of the `kubefed`
tool. So we are providing these flags to allow users to override these
values.
Also, since users register their clusters with federation, it is makes
sense in terms of user experience to make the cluster name a positional
argument because that feels more natural. Also, specifying cluster name
in the join command as a mandatory positional argument make
`kubefed join` consistent with `kubefed unjoin`. This also means
`--cluster-context` is now made a flag and defaults to cluster name if
unspecified.
`--secret-name` also defaults to the cluster name if unspecified.
Fixes: Issue #35954
cc @kubernetes/sig-cluster-federation @quinton-hoole @irfanurrehman
- Adds command line flags --config-map, --config-map-ns.
- Fixes 36194 (https://github.com/kubernetes/kubernetes/issues/36194)
- Update kube-dns yamls
- Update bazel (hack/update-bazel.sh)
- Update known command line flags
- Temporarily reference new kube-dns image (this will be fixed with
a separate commit when the DNS image is created)
When running the kubectl via symlink to hyperkube, the --export is not delegated to 'kubectl get' but to 'kubectl' only.
Ending with unrecognized flag.
Automatic merge from submit-queue
make kubectl create --edit iterate
`kubectl create --edit` is broken after #36148 merged.
`kubectl create --edit` will fail when a manifest that contains multiple resources.
I guess the root cause is that dynamic typer doesn't support a list of resources currently.
This PR makes `kubectl create --edit` iterate again as `kubectl create`.
Automatic merge from submit-queue
Require BOOTSTRAP_MIGRATION, JENKINS_BUILD_STARTED or JENKINS_BUILD_F…
If we do not do this then we upload finished.json and update latest-build.txt before the build fiinshes, breaking the SQ
Vast majority of cluster contexts are not RFC 1123 subdomains. Since
cluster and secret names for the API objects are derived from the
cluster context name, there is no way for users to join clusters
with such context names to federation, unless they modify the context
name in their kubeconfigs itself. That's a lot of inconvenience and
entirely goes against the goal and beats the purpose of the `kubefed`
tool. So we are providing these flags to allow users to override these
values.
Also, since users register their clusters with federation, it is makes
sense in terms of user experience to make the cluster name a positional
argument because that feels more natural. Also, specifying cluster name
in the join command as a mandatory positional argument make `kubefed
join` consistent with `kubefed unjoin`. This also means `--cluster-
context` is now made a flag and defaults to cluster name if unspecified.
`--secret-name` also defaults to the cluster name if unspecified.
Automatic merge from submit-queue
V2resource fixes
when using kubectl set resources it resets all resource fields that are not being set.
for example
$ kubectl set resources deployments nginx --limits=cpu=100m
followed by
$ kubectl set resources deployments nginx --limits=memory=256Mi
would result in the nginx deployment only limiting memory at 256Mi with the previous
limit placed on the cpu being wiped out. This behavior is corrected so that each invocation
only modifies fields set in that command and changed the testing so that the desired behavior
is checked.
Also a typo:
you must specify an update to requests or limits or (in the form of --requests/--limits)
corrected to
you must specify an update to requests or limits (in the form of --requests/--limits)
Implemented both the dry run and local flags.
Added test cases to show that both flags are operating as intended.
Removed the print statement "running in local mode" as in PR#35112
The original PR associated with these fixes where reverted due to causing a flake in hack/make-rules/test-cmd.sh, I gave the 'kubectl set resources' tests there own deployment and set the terminationGracePeriodSeconds to 0 and have run test-cmd.sh for hours without hitting the flake
Automatic merge from submit-queue
[kubelet]update some --cgroups-per-qos to --experimental-cgroups-per-qos
Follow https://github.com/kubernetes/kubernetes/pull/36767, there are some fields still need update in docs or hack/local-up-cluster.sh
Automatic merge from submit-queue
Add a flag allowing contention profiling of the API server
Useful for performance debugging.
cc @smarterclayton @timothysc @lavalamp
```release-note
Add a flag allowing contention profiling of the API server
```
Automatic merge from submit-queue
Add authz to psp admission
Add authz integration to PSP admission to enable granting access to use specific PSPs on a per-user and per-service account basis. This allows an administrator to use multiple policies in a cluster that grant different levels of access for different types of users.
Builds on https://github.com/kubernetes/kubernetes/pull/32555. Second commit adds authz check to matching policy function in psp admission.
@deads2k @sttts @timstclair
Automatic merge from submit-queue
Better messaging for missing volume binaries on host
**What this PR does / why we need it**:
When mount binaries are not present on a host, the error returned is a generic one.
This change is to check the mount binaries before the mount and return a user-friendly error message.
This change is specific to GCI and the flag is experimental now.
https://github.com/kubernetes/kubernetes/issues/36098
**Release note**:
Introduces a flag `check-node-capabilities-before-mount` which if set, enables a check (`CanMount()`) prior to mount operations to verify that the required components (binaries, etc.) to mount the volume are available on the underlying node. If the check is enabled and `CanMount()` returns an error, the mount operation fails. Implements the `CanMount()` check for NFS.
Sample output post change :
rkouj@rkouj0:~/go/src/k8s.io/kubernetes$ kubectl describe pods
Name: sleepyrc-fzhyl
Namespace: default
Node: e2e-test-rkouj-minion-group-oxxa/10.240.0.3
Start Time: Mon, 07 Nov 2016 21:28:36 -0800
Labels: name=sleepy
Status: Pending
IP:
Controllers: ReplicationController/sleepyrc
Containers:
sleepycontainer1:
Container ID:
Image: gcr.io/google_containers/busybox
Image ID:
Port:
Command:
sleep
6000
QoS Tier:
cpu: Burstable
memory: BestEffort
Requests:
cpu: 100m
State: Waiting
Reason: ContainerCreating
Ready: False
Restart Count: 0
Environment Variables:
Conditions:
Type Status
Initialized True
Ready False
PodScheduled True
Volumes:
data:
Type: NFS (an NFS mount that lasts the lifetime of a pod)
Server: 127.0.0.1
Path: /export
ReadOnly: false
default-token-d13tj:
Type: Secret (a volume populated by a Secret)
SecretName: default-token-d13tj
Events:
FirstSeen LastSeen Count From SubobjectPath Type Reason Message
--------- -------- ----- ---- ------------- -------- ------ -------
7s 7s 1 {default-scheduler } Normal Scheduled Successfully assigned sleepyrc-fzhyl to e2e-test-rkouj-minion-group-oxxa
6s 3s 4 {kubelet e2e-test-rkouj-minion-group-oxxa} Warning FailedMount Unable to mount volume kubernetes.io/nfs/32c7ef16-a574-11e6-813d-42010af00002-data (spec.Name: data) on pod sleepyrc-fzhyl (UID: 32c7ef16-a574-11e6-813d-42010af00002). Verify that your node machine has the required components before attempting to mount this volume type. Required binary /sbin/mount.nfs is missing
Automatic merge from submit-queue
Add Windows support to kube-proxy
<!-- Thanks for sending a pull request! Here are some tips for you:
1. If this is your first time, read our contributor guidelines https://github.com/kubernetes/kubernetes/blob/master/CONTRIBUTING.md and developer guide https://github.com/kubernetes/kubernetes/blob/master/docs/devel/development.md
2. If you want *faster* PR reviews, read how: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/faster_reviews.md
3. Follow the instructions for writing a release note: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/pull-requests.md#release-notes
-->
**What this PR does / why we need it**:
This is the first stab at supporting kube-proxy (userspace mode) on Windows
**Which issue this PR fixes** :
fixes#30278
**Special notes for your reviewer**:
The MVP uses `netsh portproxy` to redirect traffic from `ServiceIP:ServicePort` to a `LocalIP:LocalPort`.
For the next version we are expecting to have guidance from Microsoft Container Networking team.
**Limitations**:
Current implementation does not support DNS queries over UDP as `netsh portproxy` currently only supports TCP. We are working with Microsoft to remediate this.
cc: @brendandburns @dcbw
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```release-note
```
Automatic merge from submit-queue
Make GCI nodes mount non tmpfs, ext* & bind mounts using an external mounter
This PR downloads the stage1 & gci-mounter ACIs as part of cluster bring up instead of downloading them dynamically from gcr.io, which was the cause for #36206.
I have also optimized the containerized mounter to pre-load the mounter image once to avoid fetch latency while using it.
Original PR which got reverted: https://github.com/kubernetes/kubernetes/pull/35821
```release-note
GCI nodes use an external mounter script to mount NFS & GlusterFS storage volumes
```
@mtaufen Node e2e is not re-enabled in this PR.
cc @jingxu97
Automatic merge from submit-queue
specify custom ca file to verify the keystone server
<!-- Thanks for sending a pull request! Here are some tips for you:
1. If this is your first time, read our contributor guidelines https://github.com/kubernetes/kubernetes/blob/master/CONTRIBUTING.md and developer guide https://github.com/kubernetes/kubernetes/blob/master/docs/devel/development.md
2. If you want *faster* PR reviews, read how: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/faster_reviews.md
3. Follow the instructions for writing a release note: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/pull-requests.md#release-notes
-->
**What this PR does / why we need it**:
Sometimes the keystone server's certificate is self-signed, mainly used for internal development, testing and etc.
For this kind of ca, we need a way to verify the keystone server.
Otherwise, below error will occur.
> x509: certificate signed by unknown authority
This patch provide a way to pass in a ca file to verify the keystone server when starting `kube-apiserver`.
**Which issue this PR fixes** : fixes#22695, #24984
**Special notes for your reviewer**:
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
``` release-note
```
Provides an opt-in flag, --experimental-fail-swap-on (and corresponding
KubeletConfiguration value, ExperimentalFailSwapOn), which is false by default.
Automatic merge from submit-queue
Rename experimental-runtime-integration-type to experimental-cri
Also rename the field in the component config to `EnableCRI`
If we have a public & private zone with the same name (which is common
on AWS), this means we can still create records. Also tighten up some
of the logic to allow for zones with duplicate names.
Automatic merge from submit-queue
Add verify script for federation OpenAPI spec generation
We are missing hack/verify-federation-openapi-spec.sh. It should be something similar to hack/verify-openapi-spec.sh.
Automatic merge from submit-queue
Fix hack/local-up by declaring defaults for unbound env vars
The variables were not defaulted and caused hack/local-up-cluster to not work.
Automatic merge from submit-queue
Node Conformance Test: Add system verification
For #30122 and #29081.
This PR introduces system verification test in node e2e and conformance test. It will run before the real test. Once the system verification fails, the test will just fail. The output of the system verification is like this:
```
I0909 23:33:20.622122 2717 validators.go:45] Validating os...
OS: Linux
I0909 23:33:20.623274 2717 validators.go:45] Validating kernel...
I0909 23:33:20.624037 2717 kernel_validator.go:79] Validating kernel version
KERNEL_VERSION: 3.16.0-4-amd64
I0909 23:33:20.624146 2717 kernel_validator.go:93] Validating kernel config
CONFIG_NAMESPACES: enabled
CONFIG_NET_NS: enabled
CONFIG_PID_NS: enabled
CONFIG_IPC_NS: enabled
CONFIG_UTS_NS: enabled
CONFIG_CGROUPS: enabled
CONFIG_CGROUP_CPUACCT: enabled
CONFIG_CGROUP_DEVICE: enabled
CONFIG_CGROUP_FREEZER: enabled
CONFIG_CGROUP_SCHED: enabled
CONFIG_CPUSETS: enabled
CONFIG_MEMCG: enabled
I0909 23:33:20.679328 2717 validators.go:45] Validating cgroups...
CGROUPS_CPU: enabled
CGROUPS_CPUACCT: enabled
CGROUPS_CPUSET: enabled
CGROUPS_DEVICES: enabled
CGROUPS_FREEZER: enabled
CGROUPS_MEMORY: enabled
I0909 23:33:20.679454 2717 validators.go:45] Validating docker...
DOCKER_GRAPH_DRIVER: aufs
```
It verifies the system following a predefined `SysSpec`:
``` go
// DefaultSysSpec is the default SysSpec.
var DefaultSysSpec = SysSpec{
OS: "Linux",
KernelVersion: []string{`3\.[1-9][0-9].*`, `4\..*`}, // Requires 3.10+ or 4+
// TODO(random-liu): Add more config
KernelConfig: KernelConfig{
Required: []string{
"NAMESPACES", "NET_NS", "PID_NS", "IPC_NS", "UTS_NS",
"CGROUPS", "CGROUP_CPUACCT", "CGROUP_DEVICE", "CGROUP_FREEZER",
"CGROUP_SCHED", "CPUSETS", "MEMCG",
},
Forbidden: []string{},
},
Cgroups: []string{"cpu", "cpuacct", "cpuset", "devices", "freezer", "memory"},
RuntimeSpec: RuntimeSpec{
DockerSpec: &DockerSpec{
Version: []string{`1\.(9|\d{2,})\..*`}, // Requires 1.9+
GraphDriver: []string{"aufs", "overlay", "devicemapper"},
},
},
}
```
Currently, it only supports:
- Kernel validation: version validation and kernel configuration validation
- Cgroup validation: validating whether required cgroups subsystems are enabled.
- Runtime Validation: currently, only validates docker graph driver.
The validating framework is ready. The specific validation items could be added over time.
@dchen1107
/cc @kubernetes/sig-node
Automatic merge from submit-queue
Rename PetSet to StatefulSet in docs and examples.
**What this PR does / why we need it**: Addresses some of the pre-code-freeze changes for implementing the PetSet --> StatefulSet rename. (#35534)
**Special notes for your reviewer**: This PR only changes docs and examples, as #35731 hasn't been merged yet and I don't want to create merge conflicts. I'll open another PR for any remaining code changes needed after that PR is merged. /cc @erictune @janetkuo @chrislovecnm
Automatic merge from submit-queue
New command: "kubeadm token generate"
As part of #33930, this PR adds a new top-level command to kubeadm to just generate a token for use with the init/join commands. Otherwise, users are left to either figure out how to generate a token on their own, or let `kubeadm init` generate a token, capture and parse the output, and then use that token for `kubeadm join`.
At this point, I was hoping for feedback on the CLI experience, and then I can add tests. I spoke with @mikedanese and he didn't like the original propose of `kubeadm util generate-token`, so here are the runners up:
```
$ kubeadm generate-token # <--- current implementation
$ kubeadm generate token # in case kubeadm might generate other things in the future?
$ kubeadm init --generate-token # possibly as a subcommand of an existing one
```
Currently, the output is simply the token on one line without any padding/formatting:
```
$ kubeadm generate-token
1087fd.722b60cdd39b1a5f
```
CC: @kubernetes/sig-cluster-lifecycle
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
``` release-note
New kubeadm command: generate-token
```
Automatic merge from submit-queue
Add --force to kubectl delete and explain force deletion
--force is required for --grace-period=0. --now is == --grace-period=1.
Improve command help to explain what graceful deletion is and warn about
force deletion.
Part of #34160 & #29033
```release-note
In order to bypass graceful deletion of pods (to immediately remove the pod from the API) the user must now provide the `--force` flag in addition to `--grace-period=0`. This prevents users from accidentally force deleting pods without being aware of the consequences of force deletion. Force deleting pods for resources like StatefulSets can result in multiple pods with the same name having running processes in the cluster, which may lead to data corruption or data inconsistency when using shared storage or common API endpoints.
```
Automatic merge from submit-queue
make using service account credentials from controllers optional
Adds a flag to make the "SA per controller" behavior optional.
Automatic merge from submit-queue
add script to check for updates to the files for generation
Adds a verify script to help people writing APIs remember to wire all the individual pieces up. Eventually it will be better to avoid this altogether, but this is a start.
@ncdc fyi
Automatic merge from submit-queue
kubectl: make edit work with lists again
@kubernetes/kubectl this is fixing https://github.com/kubernetes/kubernetes/issues/20519 and slightly changes the behavior of --recursive when the directory that is being edited has files with errors. Previously since `edit` was working on an object basis, bad objects would be skipped and the editor would load the next object. We want to load multiple objects in the same list and it's impossible to load invalid objects in a list so --recursive will not work if there is any error in the directory. I think this is an acceptable trade-off.
Review here: https://github.com/kubernetes/kubernetes/pull/36148/files?w=1
Automatic merge from submit-queue
Switch DisruptionBudget api from bool to int allowed disruptions [only v1beta1]
Continuation of #34546. Apparently it there is some bug that prevents us from having 2 different incompatibile version of API in integration tests. So in this PR v1alpha1 is removed until testing infrastructure is fixed.
Base PR comment:
Currently there is a single bool in disruption budget api that denotes whether 1 pod can be deleted or not. Every time a pod is deleted the apiserver filps the bool to false and the disruptionbudget controller sets it to true if more deletions are allowed. This works but it is far from optimal when the user wants to delete multiple pods (for example, by decreasing replicaset size from 10000 to 8000).
This PR adds a new api version v1beta1 and changes bool to int which contains a number of pods that can be deleted at once.
cc: @davidopp @mml @wojtek-t @fgrzadkowski @caesarxuchao
Automatic merge from submit-queue
Disable the test-owners verify step until the merge conflicts are resolved
It's causing more pain than it's preventing currently. There should be some simpler ways to fix this.
Monis Khan