This PR is to fix the issue in converting aws volume id from mount
paths. Currently there are three aws volume id formats supported. The
following lists example of those three formats and their corresponding
global mount paths:
1. aws:///vol-123456
(/var/lib/kubelet/plugins/kubernetes.io/aws-ebs/mounts/aws/vol-123456)
2. aws://us-east-1/vol-123456
(/var/lib/kubelet/plugins/kubernetes.io/mounts/aws/us-est-1/vol-123455)
3. vol-123456
(/var/lib/kubelet/plugins/kubernetes.io/mounts/aws/us-est-1/vol-123455)
For the first two cases, we need to check the mount path and convert
them back to the original format.
Automatic merge from submit-queue
Remove unused WaitForDetach from Detacher interface and plugins
See issue #33128 and PR #33270
We can't rely on the device name provided by OpenStack Cinder, and thus
must perform detection based on the drive serial number (aka It's cinder ID)
on the kubelet itself.
This needs to be removed now, as part of #33128, as the code can't be
updated to attempt device detection and fallback through to the Cinder
provided deviceName, as detection "fails" when the device is gone, and
if cinder has reported a deviceName that another volume has used in
relaity, then this will block forever (or until the other, unreleated,
volume has been detached)
Automatic merge from submit-queue
Remove GetRootContext method from VolumeHost interface
Remove the `GetRootContext` call from the `VolumeHost` interface, since Kubernetes no longer needs to know the SELinux context of the Kubelet directory.
Per #33951 and #35127.
Depends on #33663; only the last commit is relevant to this PR.
We are more liberal in what we accept as a volume id in k8s, and indeed
we ourselves generate names that look like `aws://<zone>/<id>` for
dynamic volumes.
This volume id (hereafter a KubernetesVolumeID) cannot directly be
compared to an AWS volume ID (hereafter an awsVolumeID).
We introduce types for each, to prevent accidental comparison or
confusion.
Issue #35746
This has been unused since 542f2dc7, and relies on deviceName, which
can no longer be relied upon (see issue #33128).
This needs to be removed now, as part of #33128, as the code can't be
updated to attempt device detection and fallback through to the Cinder
provided deviceName, as detection "fails" when the device is gone, and
if cinder has reported a deviceName that another volume has used in
relaity, then this will block forever (or until the other, unreleated,
volume has been detached)
At master volume reconciler, the information about which volumes are
attached to nodes is cached in actual state of world. However, this
information might be out of date in case that node is terminated (volume
is detached automatically). In this situation, reconciler assume volume
is still attached and will not issue attach operation when node comes
back. Pods created on those nodes will fail to mount.
This PR adds the logic to periodically sync up the truth for attached volumes kept in the actual state cache. If the volume is no longer attached to the node, the actual state will be updated to reflect the truth. In turn, reconciler will take actions if needed.
To avoid issuing many concurrent operations on cloud provider, this PR
tries to add batch operation to check whether a list of volumes are
attached to the node instead of one request per volume.
More details are explained in PR #33760
When kubelet restarts, all the information about the volumes will be
gone from actual/desired states. When update node status with mounted
volumes, the volume list might be empty although there are still volumes
are mounted and in turn causing master to detach those volumes since
they are not in the mounted volumes list. This fix is to make sure only
update mounted volumes list after reconciler starts sync states process.
This sync state process will scan the existing volume directories and
reconstruct actual states if they are missing.
This PR also fixes the problem during orphaned pods' directories. In
case of the pod directory is unmounted but has not yet deleted (e.g.,
interrupted with kubelet restarts), clean up routine will delete the
directory so that the pod directoriy could be cleaned up (it is safe to
delete directory since it is no longer mounted)
The third issue this PR fixes is that during reconstruct volume in
actual state, mounter could not be nil since it is required for creating
container.VolumeMap. If it is nil, it might cause nil pointer exception
in kubelet.
Details are in proposal PR #33203
Gluster provisioner is interested in pvc.Namespace and I don't want to add
at as a new field in VolumeOptions - it would contain almost whole PVC.
Let's pass direct reference to PVC instead and let the provisioner to pick
information it is interested in.
We had another bug where we confused the hostname with the NodeName.
To avoid this happening again, and to make the code more
self-documenting, we use types.NodeName (a typedef alias for string)
whenever we are referring to the Node.Name.
A tedious but mechanical commit therefore, to change all uses of the
node name to use types.NodeName
Also clean up some of the (many) places where the NodeName is referred
to as a hostname (not true on AWS), or an instanceID (not true on GCE),
etc.
Currently kubelet volume management works on the concept of desired
and actual world of states. The volume manager periodically compares the
two worlds and perform volume mount/unmount and/or attach/detach
operations. When kubelet restarts, the cache of those two worlds are
gone. Although desired world can be recovered through apiserver, actual
world can not be recovered which may cause some volumes cannot be cleaned
up if their information is deleted by apiserver. This change adds the
reconstruction of the actual world by reading the pod directories from
disk. The reconstructed volume information is added to both desired
world and actual world if it cannot be found in either world. The rest
logic would be as same as before, desired world populator may clean up
the volume entry if it is no longer in apiserver, and then volume
manager should invoke unmount to clean it up.
Automatic merge from submit-queue
AWS/GCE: Spread PetSet volume creation across zones, create GCE volumes in non-master zones
Long term we plan on integrating this into the scheduler, but in the
short term we use the volume name to place it onto a zone.
We hash the volume name so we don't bias to the first few zones.
If the volume name "looks like" a PetSet volume name (ending with
-<number>) then we use the number as an offset. In that case we hash
the base name.
Modify attach/detach controller to keep track of volumes to report
attached in Node VolumeToAttach status.
Modify kubelet volume manager to wait for volume to show up in Node
VolumeToAttach status.
Implement exponential backoff for errors in volume manager and attach
detach controller
We had a long-lasting bug which prevented creation of volumes in
non-master zones, because the cloudprovider in the volume label
admission controller is not initialized with the multizone setting
(issue #27656).
This implements a simple workaround: if the volume is created with the
failure-domain zone label, we look for the volume in that zone. This is
more efficient, avoids introducing a new semantic, and allows users (and
the dynamic provisioner) to create volumes in non-master zones.
Fixes#27657
Long term we plan on integrating this into the scheduler, but in the
short term we use the volume name to place it onto a zone.
We hash the volume name so we don't bias to the first few zones.
If the volume name "looks like" a PetSet volume name (ending with
-<number>) then we use the number as an offset. In that case we hash
the base name.
Fixes#27256
This commit adds a new volume manager in kubelet that synchronizes
volume mount/unmount (and attach/detach, if attach/detach controller
is not enabled).
This eliminates the race conditions between the pod creation loop
and the orphaned volumes loops. It also removes the unmount/detach
from the `syncPod()` path so volume clean up never blocks the
`syncPod` loop.
This PR contains Kubelet changes to enable attach/detach controller control.
* It introduces a new "enable-controller-attach-detach" kubelet flag to
enable control by controller. Default enabled.
* It removes all references "SafeToDetach" annoation from controller.
* It adds the new VolumesInUse field to the Node Status API object.
* It modifies the controller to use VolumesInUse instead of SafeToDetach
annotation to gate detachment.
* There is a bug in node-problem-detector that causes VolumesInUse to
get reset every 30 seconds. Issue https://github.com/kubernetes/node-problem-detector/issues/9
opened to fix that.
Split controller cache into actual and desired state of world.
Controller will only operate on volumes scheduled to nodes that
have the "volumes.kubernetes.io/controller-managed-attach" annotation.
Chao Xu